I'm trying to get my code to work by trying to copy from a visible tab into a hidden tab. Currently I have it able to function when the tabs are hidden, and i've been trying to get it to work.
My code is below. I have a variable section because there are different sheets that will be hidden, and this is a way that i found works to get the variable tabs selected.
I am having a problem with hidden columns when creating a new sheet via VBA.
The source sheet has (4) columns that are hidden when this data is pasted to the destination sheet it ignores the four columns.
I need the destination sheet to be identical to the source sheet with the hidden columns.
As you can see in the code I have been able to hide the columns however the data is now in the wrong columns because the copied data excluded these columns. I tried hiding the columns before and after the paste with no success I'm thinking the issue lies in the actual copy portion of this task.
Code:
Sub E_MAIL()
'
' E_MAIL Macro
'
' Multiple_emails_and_Sheets Macro
'This is used for one sheet with multiple e-mails.
' ThisWorkbook.Sheets("NO").Copy
[Code] ........
I'm trying to copy a range with hidden rows,
but if i do like this:
range("A1:A10").copy Destination:=Range("A15")
but, as i said, some rows are hidden and i want copy them too.
Unfortunately Excel copy only visible...
How can i copy an paste hidden cells too?
I have searched all over and read many solutions for selecting only visible cells and copy pasting them or formatting them by doing Ctrl + G and selecting visible cells only. However the problem is once I select visible cells only, it seems that every time I do Ctrl + C on filtered Range it only selects visible cells. I want a way to toggle this setting in Excel. I'm using Office 2007. For example: if I want to select the entire range, both hidden and visible cells within the selected table array, is there anyway to reverse or toggle the setting that causes Excel to refresh the "visible cells only" setting back to default or all cells?
It would be a much faster way than to remove all filters, select & copy entire range, and then re-apply all filters again.
I have recorded the below macro and I am not very happy with it. enhance the macro and add the following:
I need to copy the range "ROW" and past it below the range "MENU". Also the range "ROW" (ROW = copy of 3 line with some cells merged) is hidden.
I need to unhide and hide back the rang ROW. Right know I have to leave the range appearing otherwise my macro doesn't work.
HTML Code:
Sub ADD()
' ActiveWindow.LargeScroll Down:=2
Range("ROW").Select
Range("ROW").Activate
Application.CutCopyMode = False
Selection.Copy
' ActiveWindow.LargeScroll Down:=-2
Rows("7:7").Select
Selection.Insert Shift:=xlDown
Range("A7:A9").Select
End Sub
Sheets("Sheet1").Select
Range("A1:B2000").Select
Selection.Copy
Windows("SL Forms.xls").Activate
Sheets("Hidden Sheet").Select
Range("A1:B2000").Select
Selection.PasteSpecial Paste:=xlPasteValuesAndNumberFormats, Operation:=xlNone
Selection.PasteSpecial Paste:=xlPasteFormats, Operation:=xlNone
Sheets("Hidden Sheet").Select
The macro starts on open, opens the workbook with the data to copy, copies and pastes the data into the original workbook. The problem is that "Hidden Sheet" is hidden, so the macro can't see it!
how do I get the macro to use this hidden sheet without keeping it 'un-hidden'?
Sheet1 has info in column a, b, c, d, e.
I want to paste these value into sheet2 but sheet2 has columns b, d hidden.
The paste end up putting the values in the hidden columns.
Is there a way of pasting a speacial so that the hidden columns are missed and i get the paste to go into colums a, c, e, f, g WITHOUT code?
How can I block the hidden cells, so that when I want to copy/paste into another workbook, pasted data has to be all, except hidden&locked cell?
View 4 Replies View RelatedI'm using 2003.
1. Copy cells B5 to V-First blank row in Strength Tests worksheet
2. Paste cells into Racks worksheet in cell C5
3. Change font size to 6
4. Sort by Column T descending then by Column C ascending
5. Copy one row (A5-W5 (1Rx23C)) from Racks worksheet
6. Paste row into M1 worksheet in cell D4
7. Print M1
8. Drop down one row on the Racks worksheet
9. Repeat steps 5-8 until there's a blank row.
when I want to send by email I find I cannot copy these smaller sheets - every attempt at a copy will also copy the hidden columns.
How to copy a spreadsheet and NOT pick up the hidden columns?
I realise this might be nearly impossible or considered useless because no hidden columns would mean either making the copy with blank hidden columns or altering all formulas to suit a sheet which now does not have all the original columns.
I have 5 sheets in a workbook. Three are hidden. My code allows user to make as many copies of the hidden sheets as needed and place them at the end by means of a macro button. This works fine, but after multiple copies (4 to 15) it crashes! Don't know what I did wrong.
Sub CopyWs()
Sheet8.Visible = True
Sheet8.Select
Sheet8.Copy After:=Sheets(Worksheets.Count)
Sheet8.Visible = False
Sheet9.Visible = True
Sheet9.Select
Sheet9.Copy After:=Sheets(Worksheets.Count)
Sheet9.Visible = False
Sheet10.Visible = True
Sheet10.Select
Sheet10.Copy After:=Sheets(Worksheets.Count)
Sheet10.Visible = False
End Sub
Is there a way to copy and paste a sheet from one spreadsheet to another without getting the rows that have been hidden? I have a database with about 800 rows and another 150 or 200 scattered through it that are currently hidden. For what I need right now I don't want any of that hidden data. Do I have to manually delete it or is there a way to ignore it (I thought of paste special but I can't find one that works).
View 2 Replies View RelatedI have a workbook, wich copies content from an overview sheet to different other sheets. that works fine, but if I try to hide the content-placeholder sheets, I can't copy my content anymore.
here the part where I get the error;
'OldValue contains the name of the "copy to" sheet as a string
Sheets(OldValue).Select
I have a hidden holding sheet where I copy data into col A as follows:
Sheets("April_June"). Range("a10:A110").Copy Destination:=Sheets("Staff_Import").Range("a1")
This works fine but what I also need to do is delete the blank rows in the holding sheet "Staff_Import" and copy back to another sheet "July_Sept" without removing the formatting in "July_Sept" sheet ie cell fill & borders.
I need to create a new excel template for work. I was planning to copy a few worksheets from an old workbook over into the new workbook, mostly just for formatting for some graphs/tables that I would then link to the new workbook. A coworker said I cannot do this as copying from an old workbook will bring in "hidden" data that could some way impact the integrity of the new workbook and that the copied/old worksheet would FOREVER be linked to the new workbook no matter what I do. Is this true? If so, are there things I can do to remove any reliance to the old workbook.
View 1 Replies View RelatedI have a database (attached) that has data entered into the "Progression" sheet. This data is continually updated, and once each row has a section date, I have a macro that moves the data from "Progression" to the "Complete" sheet (and from there, into a specific month sheet). I AM REALLY CONCERNED with data accidentally getting deleted (especially when/after getting moved to "Complete"). I know that you can link cell values from one worksheet to another, but since my data is continually changing in the Progression and Complete sheets, the linkage wouldn't maintain the correct cell values from day to day. Is there a better approach to creating "backup" data in excel than this linkage option? Preferably something that runs in the background without my input?
An option could be that I move my data from Progression into both the Complete sheet and then a hidden "Master" sheet when I run the macro. If I chose that route, how would I modify my coding to include transferring to the Master sheet as well?
Lastly, a simple linkage between the Master sheet and another sheet in a second workbook should be sufficient as a backup method?
I asked for a macro that copy an worksheet and rename it using a userfom!
I received the xls file attached to this mail !
In this xls when I click "Click me to copy s0 sheet and rename it" from final sheet, a userform appear, I type a name there and when I press ok I will have a copy of worksheet "s0" with the name typed in the userform.
If I click on "Click me to copy s0 sheet and rename it" I can create as many copies as I need.
But if I hide worksheet "s0" (using Format /Sheet/Hide) the macro will not work.
I modified the code from module 1 adding the red
I have a macro that copies 2 worksheets of an open workbook "Combined Sales Tool" and saves those 2 sheets in the root of the C drive with a variable name.
I want to know how I can #1 close the newly created workbook, #2 focus back to the original workbook "Combined Sales Tool", hide the 2 sheets that were copied to the new file, then close the original workbook with (and for example without) saving
part of my code below:
Sub esummary()
Dim OutApp4 As Object
Dim OutMail4 As Object
Dim cell As Range
Dim filedoc As String
Dim intFreeRow
Dim emailatt4 As String
Sheets("Summary").Visible = True
Sheets("Email").Visible = True
Sheets( Array("Summary", "Email")).Select
Sheets("Summary").Activate
Sheets(Array("Summary", "Email")).Copy
Cells.Select
Selection.Copy
Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
Application.CutCopyMode = False
Ok I recently ran into something in Excel that was completely unexpected. When I filter data, and select multiple rows of data, and copy and paste it.... it pastes the unfiltered rows as hidden rows! Is there a way around this without copying row by row?
View 1 Replies View RelatedThis macro works fine on my machine but not with other users:
This should copy/paste certain cells then paste 3 sheets into a new work book.
ON other computers it seems to paste in a picture? works OK for me?
Sub ValidationTests()
'
' ValidationTests Macro
' Macro recorded 21/12/2011 by '
'
Sheets("Score Sheet").Select
Range("A8:M18").Select
Range("H18").Activate
Selection.Copy
[Code] ..........
I am trying to format all cells on all sheets (hidden or otherwise) as "Locked" so when the sheets are protected the user can't see the formulas. This macro individually selects every sheet in the book and applys the formatting. Is there a way to modify this code to accomplish the same thing without having it actually select every sheet? The only reason it is an issue is that after running the macro you end up on the last sheet in the book.
View 7 Replies View RelatedI would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB:
Set sourceBook = Application.Workbooks.Open(sourceFilename)
Set sourceSheet = sourceBook.Sheets("Current")
Set targetSheet = NewBook.Sheets("Sheet2")
[Code].....
copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.
View 1 Replies View RelatedI have one workbook that needs two macros.
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet.
....is equal to "McCormick" copy row to "McCormick" spreadsheet.
and so on.
HTML Code:
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
Range Pear
A B C D E
4 1 3 5
5 1 1 1
6 2
7 2 2
8 5 7
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
I'm trying to copy a whole bunch of tables with identical layout to a master table, so I can create a whole bunch of pivot tables that include data from ALL the various tables. The source tables MAY be filtered, and I can't work out how to copy them easily while also INCLUDING any hidden/filtered rows while at the same time leaving any filter settings on the source tables intact.
If I use something like range("Table1").Listobject.DataBodyRange.Copy then it only copies the VISIBLE rows.
But I want ALL rows to be copied to a master table.
1. I don't want to unfilter the sources tables, because users might still want the source tables to remain exactly as the user filtered them. (However, it doesn't matter if the DESTINATION list is filtered or not). I realise that I could copy the entire sheet to a temp sheet, then unfilter any tables on that sheet and THEN copy these to the master list. But wan't to know if there's a simpler way.
2. I DON'T want to use SQL to create a pivot table directly from the tables, because the tables will have further information added to them from time to time, and so if I use SQL to make a pivot directly from them, I'll have to recreate the pivot cache using that SQL query each time, which might muck up the settings in any existing pivot tables. I realise that I could use SQL to copy the data to a 'staging area', and just point the pivot table at that.
3. I can't use PowerPivot, because its not installed in this environment.
im looking for a basic macro for workbook copying, all workbook(all hidden, unhidden, and very hidden) sheets.
i know how to do unhidden sheets of course however the hidden and very hidden are giving me some trouble...i need to also copy over all the macro's, buttons, and drop down box's as well..not just values.
How would you prevent the copy/paste of cells that have comments?
Also, how would you allow cells with comments to be copied and pasted without pasting the comments?
I also have an aside question about the forum advanced search. When searching for multiple search words, how would you type the search to include all words, for example, "prevent" & "paste" & "comments".
I want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.