Trying to look up values based on three inputs:
Attached is the file:
Month Input, Column Input and Network Input are changeable based on user input, I am trying to get the desired output based on selection from A20, B20, C20 into cells G20, G21, G22 from row number 2 and corresponding values in H20, H21, H22 from the corresponding row based on the selection.
I have populated an example in the attached file.
I maintain the data flow at my work. We send and receive the data using excel files with specific formatting that I then upload to the database. Each time I send or receive the excel file I must log them, this is what my code question refers to.
I use RDBMerge to merge all the contents of the 100 plus excel files into one worksheet. The first part of the macro cleans up the merge data for use in the log (i have attached an example of the clean data and finished log).
The blue shaded area of the "Raw_Data" is what the clean data looks like, the yellow column is what current macro records for each record.
As you can see by the example the Raw_Data is only two files LL_LLL_BOB_ToLLLLL_20121228_01 & LL_LLL_BOB_ToLLLLL_20121230_01, each with more that one record.
The log code in column "H" Is based on this criteria:
First Letter of the Unique ID in column "E" - O, M, or L
Program Type in Column "F" - U or R
1. O-U = U
2. O-R = RU
3. M-U = U2
4. M-R = R2U
5. L-R = R
You will note that Columns G-R of the "Log Sheet" correspond to the "Record Type" found in Column "G" of the "Raw_Data" sheet.
This is the area where my skill at using scripting dictionaries fails.
The results for the log list each file only once, but the log code for each corresponding "Record Type" in columns G-R of the "Log Sheet" must contain each unique instance of the code. In other words
if LL_LLL_BOB_ToLLLLL_20121228_01 contains an O-U with an "A" Record Type and an M-R with an "A" Record Type; then, on the log sheet there needs to be the codes "U/R2U" in the cell intersection of the LL_LLL_BOB_ToLLLLL_20121228_01 record row and "A" column (which is column "G")
So, If the File contains one of each code for each Record Type the corresponding cell must house one of each code separated by a "/" without any spaces. This means the cell value could no code, or one code and all the variations in between to all five codes. Also, for ease of human reading the log codes should be concatenated in the 1-5 order that I listed them in (U/RU/U2/R2U/R)
Here is my code so far.
VB:
Option Explicit
Sub test()
Dim dic As Object, a, i As Long, rng As Range, e, w, n As Long
Set dic = CreateObject("Scripting.Dictionary")
[Code].....
I have 3 tables as per the attached samples (there is more but this is a sample for now).
In the table below these I have what I am trying to do. There is the manual input and the auto output based on the inputs.
e.g. if I input 12 in size, ball in type & A01B in piping class I hope to get the following output 20, 35, 51, 67, 83, 99 in the respective columns.
The formula needs to work across all three tables at the same time.
If I input any FX pair (Column B) without ???JPY in it, then the formula in Column K produces the correct result. Formula is: eg: If Column B = EURUSD pairs and the like: =IF(C3="L",F3-E3,IF(C3="S",E3-F3))*10000.
This formula will produce a +ve or -ve result in points (PIPS) based on the values of E3 and F3. (eg. E3 = 1.2800 & F3 = 1.2750. If C3 = L then the result is -50. Conversely if C3 = S then the result is 50.)
When I input the JPY pairs in Column B, I need the formula to calculate the same way but multiply by 100 (not 10,000). This is because all non JPY cross pairs have 4 decimal places and JPY cross pairs have 2 decimal places. (eg. 1 PIP in EURUSD = .0001, 1 PIP in USDJPY = .01).....
So if Column B = USDJPY the formula would need to be: =IF(C3="L",F3-E3,IF(C3="S",E3-F3))*100 . Have tried many combination's of the IF function but am now starting to think this is not quite the right formula for this situation. Attached is a sample of what I am trying to achieve. The formula would need to incorporate any/all variations in currency pairs as listed in the attached sample.
This is for my fantasy football league, so perhaps being familiar with fantasy football will be of help. It's somewhat complicated, so I'm just going to explain what I would like to do: Upon opening the Excel file, there will be a few questions. The first will ask what type of draft, with just two choices, A or B. Below that, it will have inputs asking how many teams, how many players per team, and, if option B was chosen, how many dollars per team. After answering the questions, there should be a button that will "generate" what I'm about to describe.
Choosing option A or B will result in two completely different sheets: -Option A will have X columns for the number of teams entered, and Y rows for the number of players per team. If possible, something will pop up allowing the user to input each team name.
-Option B will be a bit more complicated. I have a template of what one column will be for each team, and would need to have that repeated for the number of teams entered. Additionally, the number of players per team and dollars per team will need to be placed into an existing formula that will perform certain calculations. And, if possible, the number of players per team will alter the column template if the number is over a pre-defined number. And, like the previous option, it would present a pop up allowing the user to input each team name.
I apologize for the length of this question, and while it is too extensive to ask someone here to do, I would like to know what I can expect if I try to achieve this. Will I need to know programming code? Can you point me to some articles that will help me in terms of turning an inputted number into a spreadsheet with that number of columns after hitting a "submit" button?
I'm working on a fairly complex spreadsheet where I want to pull conditional formatting into an entire row. I have a column in tab1 where I have a bunch of beer styles listed. On tab2, I have a 2 columns: a complete list of styles with a 'yes' or 'no' in the next column based on certain criteria. What I'd like to do is have the column in tab1 highlight if that style in tab2 has a 'no' in the column next to it.
View 3 Replies View RelatedTrying to create a dynamic costing spreadsheet, where the user has to make multiple selections from many dropdown lists, all of which end up showing a total cost.
So far I have managed to create relatively dynamic lists, so that the choice in one cell will dictate what options are available in the next.
But if a user selects an options form all the dropdowns, and then decides to go back and modify a previous option to something else, the effected dropdown lists do not change until you click on the drop down arrow again and see the options available have changed.
Let me try and simplify...
'Menu 1' has two option: 'A' and 'B'.
If 'A' is chosen, then the next menu, 'Menu 2', will have options '1' and '2'.
If 'B' is chosen from 'Menu 1', then the options in 'Menu 2' will be '3' and '4'.
Lets say the user chose 'A' from 'Menu 1' and then '1' from 'Menu 2'... AND THEN went back and changed their choice in 'Menu 1' to 'B'....
'Menu 2' will still be displaying '1', even though the options are only '3' and '4'.
Can I make the dependant menu's either reset or blank or highlight to show that a change made somewhere else has made them currently invalid
I have a calendar set up with dates going along P6:CU6. Column C9:C27 has various status' for the job such as "Complete" or "In Progress" etc. Next to that in rows D and E I have start and end dates for the job. What I am trying to do is change the fill colour of the empty cells that are in line with each job, so that between the correct dates they are the corresponding colour to the status. So a complete job on row 9 that started on 26/05/14 and finished on 28/05/14 would have three green cells along Q9, R9, and S9.
I have tried an IF/AND/OR statement which looks like this:
=IF(AND(Q6>=D9,Q6<=E9),OR(IF(C9="Planned","P",""),IF(C9="In Progress","IP",""),IF(C9="Late","L",""),IF(C9="Complete","C","")),"")
I am getting a #VALUE! data type error, I have tried reformatting the cells to various date formats but no luck so far. This could be because my dates are set up as =P6+1 etc. but I am not sure. The error only occurs when the cell falls within the dates, otherwise it remains blank.
I intend to hide the value in the cell and use conditional formatting to change the cell colour based on the hidden input.
Once this is working I also need to take weekends into account, column G has any 2 value combination of Y and N to say whether the employee is working Saturday, Sunday or both. Row 7 has a "1" value underneath every Saturday and a "2" underneath every Sunday. I can imagine how this would work but combining it with the above formula could be complicated.
I am attempting to find a way to search through a database I created based upon every day of the year. My goal is to have a user input a beginning date and end date for a trip, then my functions will return the range specified with each day and it's individual temperature average (in my database).
I also need generating the dates between the start and end dates that are entered by the user. I was considering combining Days360 with an Hlookup that searches through a massive sheet with all the dates for the upcoming year and then going down 1 in the column for the difference in the dates in each column.
Vlookup Help.xlsx
I have a spreadsheet of courses required to reach a certification. On this spreadsheet I have listed the number of hours required for each course in one column, and how many hours I have accrued in an adjoining column. Not all the hours will occur at once, so I tend to bound from cell to cell adding hours in small amounts. What I am trying to do is create a macro that will allow me to add to the existing number of hours to the newly accrued hours, without typing over what is already there.
For example…Class 1 requires five hours total, and I have two hours accrued. If I accrue two more hours (for a total of four hours) I want to update cell E2 without going in to this cell manually and changing this number. I would like to enter the additional two hours in a text box or similar function, and have that function update E2. To add to the level of difficulty, there are four levels of class. This means not only do I need to be able to select which class hours need updated, but which level of class. I have attached the spreadsheet I am working with to try to make things a little clearer.
I have some data in sheet1 with 10 columns and 5000 rows.
I want to filter the data with 2 criterios.
When I go to 4th column and Click custom filter, I will give one criteria and select "or" and give another criteria. SO I will get the result in sheet1, I need to copy the data and paste the same in sheet 2 with the header.
The problem is, I need to filter more than 20 times giving the criteria and copy the result and paste in sheet 2 one after the other.
So i need a macro to solve this time consuming work.
I just paste the two criteria either in a text box or some cells and run the macro. the macro has to filter the data in sheet1 based on my input.( that is criteria1 or criteria 2) and the result should be pasted in sheet2 with the headers.
Again I delete the values in my input cell, and paste the new values, and run the macro, that result should be pasted after the first result, with the header. (would be great if that is pasted leaving one row above, that is if the first result is pasted in sheet 2 till 10th Row, then the send result should be pasted in 12th row and so on..
the similar kind of question with some changes, I posted in the below link with
http://www.excelforum.com/excel-prog...in-sheet2.html
I have made a dynamic calculator which will calculate the total sale based on 3 criteria in 3 different cells as follows:-
I would like to derive the sales qty in cell C5 if all the 3 conditions in the range B2:B4 is true.
In this case the sales qty for Style-Colour-MRP combination(9103-PINK-399) should be 6.
I am unable to figure out with the formula for the same....
I have a spreadsheet with a medium-sized data set, and I need to look up values from the large table, and thin the table down to only the relevant values.
To arrive at each unique value, I will have to match 3 input cells to the first 3 cells of the data table, then copy values from across that specific line to the appropriate cells of my smaller table. I really don't need to sum or do any math in this step, its just a copy from the master table to the smaller table, the math will come later.
I think I'm attaching the file (remember-first post) so hopefully it will help with what I'm trying to accomplish. Hopefully this isn't a big deal, but I've been pulling my hair out on this all day and I just can't find a solution anywhere that really matches up to this.
I'm trying to compose a date based on inputs from a userform. The user selects the day, month and year in combo boxes, and I want to place this data on a single cell in the format DD/MM/YYYY. How can I do this?
View 1 Replies View RelatedI have a spreadsheet with over 70 worksheets. The majority of these are concerned with Work standards (National Occupational Standards), each of these standards are further broken down into performance criteria.
What I would like to happen is for a person to be able to enter a "Yes" or "No" response in a box to a specific question on an assessment report or a witness testimony worksheet. If a Yes is entered I would like the spreadsheet to automatically enter a reference i.e AR1 or WT2 (stated by the inputter on that worksheet) in each of the other seperate worksheets that cover this perfromance criteria with this reference.
Because many of the worksheets contain similar performance criteria, i.e "treating people fairly and with respect". The answer of "Yes" on the assessment report worksheet may require a reference inputting on anything up to 60 different worksheets. Is this possible or am I dreaming of the impossible?
I really should have asked this question before I wrote out all the seperate worksheets.
I've a userform with just textboxes and have written code that checks each textbox in turn to ensure a correct value has been entered. I want to run the code after any changes are made; where then would I insert the code? Userform.click doesn't appear to work nor keypress. Would I have to enter the code in each textbox_afterupdate?
View 9 Replies View RelatedI have an excel sheet which acts as a form for multiple users, and I wanted to restrict the way certain cells can be filled in.
For example, if the value in Range E12:E100=PD then the values in Range B12:B100 must be blank. Is there anyway to do something like this?
how I can ensure that only the letter X can be accepted in a cell? If any other letter or number is typed in the cell or group of cells excel should not accept it & the cell should remain blank?
View 6 Replies View RelatedI'm familiar with 2d graphs, trendlines, and regression equations. Now I have some tabular data that has 2 input variables and a result. As with my 2d data, I would like Excel to create a polynomial equation of z from the x and y inputs. Can Excel do this, or do I need a plug-in or another software package?
View 12 Replies View RelatedI am trying to create a vba using only one macro button (excel). I would like for them to enter their names and have their own password that will then insert their signature(pic.jpg) in a specific cell.
I created a certificate in excel and I don't want 12 (number of people) buttons visible. Id rather have a long code. Im not sure if using If and Then and ElseIf is the way to go.
I am currently using this macro to fill down cells full of numbers which have been passed through formulae. It works for one input (C10), however I want it to work for another input (C11). Im trying to make it fill down the cells after a new set of headings identical to row 12. It has to take into account the rows used for the original fill down which relies on C10. I have tried to use the same macro twice, but I cant get it to do both layers. Basically I need a fill down of layer 1 (already done), and then a fill down for layer 2 after layer 1.
View 2 Replies View RelatedI am not new to excel - but I have never required the use of advanced excel features before today - so I apologize in advance. I am a health professional student (graduate level) assisting my preceptor in developing patient management mechanisms.
I am building an excel spreadsheet to manage current medications for several patients.
I have built the spreadsheet with the first 'sheet' being a directory and subsequent sheets being patient data files(one sheet per patient).
I am now in the process of creating a macro to build new patient data files (a new sheet for a new patient). I recorded a macro to build the new sheet with the proper formatting of information. What I am trying to do now is automate the naming and linking of the new sheet.
What I am really after is how can you create a "prompt" such that after activating the macro button it asks:
Patient last name:
Patient first name:
Then uses this data to:
1. Rename the newly made sheet to 'last, first'
2. Title the newly made sheet with 'last, first'
3. Create an entry in the directory in the 'last, first' format
4. Finally, build the hyperlink from the directory to the newly created sheet
I have a spreadsheet where there are two drop down menus with various options. Based on those two inputs, my spreadsheet calculates a "savings" for each row. Now, I want to have cells that will keep a running total of each combination possible. I tried:
=IF(AND(A2:A37="OKC",C2:C37="AF33"),SUM(G2:G37)) but it didn't work...
A column is where you can enter 1st option
C column is where you can enter 2nd option
G column is where the savings results for those combination of inputs is populated.
I need a cell in say, J column, to sum all numbers from G column, where the combo of "OKC" and "AF33" exist.
A1 = 5
A2 = 7
A3 = A1+A2 = 12
Now I would like to keep value of A3 in cell A7 every time I change input values in A1 and A2 and so on.
A1 = 15
A2 = 8
A3 = 15+8 = 23
A7 = 12
And when an input in A3 > 100, it will popup a message, that a total cannot over 100. My code:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Row = 1 And Target.Column = 3 Then
Range("A7").Insert , CopyOrigin:=xlFormatFromLeftOrAbove
Range("A3").Value = Range("A7").Value
Exit Sub
Else
If Range("A3").Value > 100 Then MsgBox "Total exceed 100. Check you inputs!"
End If
End Sub
i have a combo box that contain range of number from (1-9)
i need some help in creating the yellow boxes automatically after i have choose the number that i want from the combo box
I am looking to create an excel search with two input and three output values on Sheet 1 that will link to a table on Sheet 2. To help illustrate:
Sheet 1:
The two white cells indicate the two input values, and the three blue cells indicate the three desired output values.
Sheet 2:
I want to enter the two input values (Length and Width), press the "Search" button, and have the corresponding output values (DWG#, Item #, and Tooling #) from Sheet 2 appear in the three output cells on Sheet 1.
why this returns a #Value! error?
{=RANK(MAX(IF(MOD(ROW(F3:F9),2)=0,F3:F9)),IF(MOD(ROW(F3:F9),2)=0,F3:F9,E1),1)}
I just used the even row selector as an example.
MAX(IF(MOD(ROW(F3:F9),2)=0,F3:F9)) returns 203 and IF(MOD(ROW(F3:F9),2)=0,F3:F9,E1) returns {0;47;0;203;0;"A";0}
when you press F9.
If I change the range to exclude the non-numeric value I get the same error (it shouldn't matter according to the help file as non-numeric values are ignored).
I'm trying to take 5 inputs that are all in text format and inputs have fixed options what i need is a macro that will take them and turn them in to the relevant outputs. there is a select amount of combinations and i've been asked to do each combination as a separate macro or sub macro.
What I have so far is;
If C6 = "Panel plate" And D6 = "24 by 21" And E6 = "<1.59" And F6 = "N/A " Then I6 = "120" And j6 = "4" And L6 = "120"
End Sub
A B C D E F G H I J K L
1
2
4
5
6 Panel plate 24 by 21 <1.59 N/A
7
8
9
10
(Doesn't seem to work)...
If those four cell match up then i need I6-L6 to line up with whats required.
If they don't equal that i need it to stay clear.
I also need to add the same macro with different options.
I am looking to take the data off of a "detail" sheet and put it to a summary page. I want the summary page to find the capital and expense from "details" sheet by the month on the "details" sheet. Then for every month add all the expenses and capital and put as 2 values per month, Capital and expense, on the summary page. I am not really sure where to begin but have added my excel workbook that I have started.
View 2 Replies View RelatedI'm making an attendance list that calculates regular hour and overtime hours for days in a month on rows. Besides the number of hours, there's input for v and s, which stand for vacations and sick days. I'm using the "if" function to separate hour and overtime, and when I put v or s in a cell it messes up my totals. Is there a way to make it so that the cells with v or s don't affect my other columns?
View 4 Replies View Related