Vb Return To Original Sheet To Paste
May 1, 2008
If I ask in a macro to open sheet containing a fax header, copy it, then how do I tell Vb to return to the original sheet to paste. There many sheets that require this from a button click on the sheet and instead of storing the graphic in all sheets I just want 1 copy so file closes faster. I would normally just name the original sheet, but this will change with every sheet.
View 13 Replies
ADVERTISEMENT
Sep 18, 2009
When i cut a row and paste it to another sheet, that row on the original sheet is shrinked. I don't know if my vba code has something to do with that
so just in case will put it here:
View 2 Replies
View Related
Oct 2, 2008
I need to know how to select the sheet the user was on at the time they ran the macro. The macro has to select (because I'm not yet smart enough to avoid all the selecting...) cells on other sheets, but I want to return to the sheet they started from at the end of the macro.
Unfortunately, they create these sheets themselves, and I have no idea what they will be named, or where they will be, or what their code numbers will be. They could delete them at any time and rearrange.
Sorry if this is a really dumb question. I suspect it is, but I can't find out how to fix it, and most people are smart enough to avoid the selects so I suspect it isn't an issue for them.
View 9 Replies
View Related
Dec 12, 2012
I've got a User Form that works perfectly. It's activated on Chart Month sheet, you enter data into it and it switches to Comments sheet and copies the data, before returning back to the Chart Month sheet.
I have now added the same functionality to Chart Week sheet. Both Chart sheets use the same comments data, so it doesn't matter if you run the User Form from Chart Month or Chart Week. However, when I run the User Form from Chart Week then it switches to the Chart Month sheet once it copies the data, as I have Chart Month in the code. How do I get it to return to the sheet that it was originally on ie either Chart Week or Chart Month?
Code:
Private Sub CommandButton1_Click()
Dim emptyRow As Long
'Make Sheet30 Active
Sheets("Comments").Activate
'Determine emptyRow
emptyRow = WorksheetFunction.CountA(Range("D:D")) + 1
[Code] .........
View 4 Replies
View Related
Jun 14, 2006
The code prints a series of sheets. Afterwards these sheets are "group"ed together. The code can be accessed from 2 different sheets. I need to figure out how to get rid of the grouping and return to the original sheet.
Private Sub CommandButton1_Click()
Sheets( Array("Pipe", "Pipe Flow")).PrintOut
UserForm1.Hide
End Sub
View 2 Replies
View Related
Jun 17, 2008
I have a workbook with about 200 sheets.
Each sheet contains lots of links to the other sheets, so the user can clink the link and then go to the new sheet.
But, how do I make a "return-function"? That can return the user to the sheet that was active before the link was followed? If possible I would like this do be doable for 5-10 sheets back.
This "return-function" is gonna be used by clicking a button on a floating toolbar I have connected to the sheet.
View 9 Replies
View Related
Nov 5, 2009
I have a workbook with 7 sheets. Each sheet has about 9 different macro buttons that are repeated all over the sheet in various locations. I want to return automatically to the sheet and cell that was last active before running a macro.
View 2 Replies
View Related
Nov 29, 2011
I'm trying to make cell values in a range change so they appear blank when a checkbox is checked, and when it is unchecked, I need the original value to appear. I have the following so far:
Private Sub CheckBox1_Click()
If CheckBox1.Value = True Then Range("BTS").Value = ""
End Sub
...However I do not know how to change the cells back to the original value before it was made blank.
View 2 Replies
View Related
Dec 3, 2007
I have a workbook where I have columns requiring entry from A to AD. I have set conditional formatting in column A to show a colour if there is an entry in column AD. I would like to use a macro to always freeze panes in column D (to show the data in the first 3 columns) and the macro would then show column AD in the other frozen pane/split.
As there will always be an entry in column A but not always in column AD I want to be able to select any highlighted row in column A , run the macro and the cursor will be showing in column AD on the same row ( relative reference?) thus showing the entry in AD next to the other info in columns A, B and C.
At the moment I have a macro that unfreezes my header row and is set to always choose the "next empty cell" but I don't know the code to change it to get what I want. Currently if I select any entry in column A e.g. row 100 and run the macro I find the cursor showing in AD2! Of course I would like to run another macro to return back to A on the same row too.....
View 9 Replies
View Related
Mar 11, 2013
Possible to look up a value from one excel sheet in another sheet and then return multiple values in the first sheet
For example the following is a sample of sheet 1
NSV Code
Item
12
OLANZAPINE
54
ROPINIROLE
And the following a sample of sheet 2 :
Nsvcode
Item
Division
Speciality
Qty
12
OLANZAPINE
CLINICAL
CS
10
[Code] .....
I want to lookUp the NSVCode from sheet 1 in sheet 2 and return the speciality and qty values in sheet 1 as sheet 2 contains a lot of info I do not require and sheet one also contains various pricing calculations I also require.
View 7 Replies
View Related
Nov 20, 2012
Wanted to know if there is a macro that can copy the selection of cells and paste it as a formula with original cell refernce.
For Example :
Copy Selection Cells - Say Cells A1 B1 & C1
and Paste It as formula In Cell D1 as =A1+B1+C1
View 7 Replies
View Related
Mar 6, 2008
I have a worksheet with various data autofiltered. I know when I filter on one of the fields, the drop down arrow becomes blue. If I filter on one or more fields, finding which fields I have autofiltered can become hard to find.
This is my question -- Can I put a button or some type of one touch command were I can take those autofilters off and return the worksheet backs to its original state before I autofiltered?
View 9 Replies
View Related
Sep 5, 2012
The problem is when I highlight a row with some color the original color of the row is gone, so I tried this code, and again, it's removing the original format and color for the row This is the code from McGimpsey & Associates : Excel : Highlight row with background colors
Code:
PrivateSub Worksheet_SelectionChange(ByVal Target As Excel.Range)
Const cnNUMCOLS AsLong=256
Const cnHIGHLIGHTCOLOR AsLong=36'default lt. yellow
Static rOld As Range
Static nColorIndices(1To cnNUMCOLS)AsLong
Dim i AsLong
IfNot rOld IsNothingThen'Restore color indices
[code].....
How can I retain the range's historical color so that when I deselect the row it reverts properly?
View 4 Replies
View Related
Oct 15, 2012
I need to copy the sheet being worked on, and place it behind the original sheet.
This is going to be in a Macro enabled template that other users will be rename when they save it.
It will be activated by a button on the original worksheet other users may need to rename the worksheet before copying so I am using ActiveSheet.Copy I don't want to put the sheet after a counted sheet, because other sheets may be inserted before the one being worked on. I am not proficient at VB, I basically search for a macro that does what I need and copy it.
This is what I am working on.
Sub CopySSR()
'
' CopySSR Macro
'
'
ActiveSheet.Copy After:=Sheets(7)
End Sub
View 2 Replies
View Related
Aug 11, 2007
I have some code written to duplicate a template and rename the copy to "Working Copy".
But if I run the code more than once, it breaks as VBA tries to overwrite the sheet with the same name.
Would I would like is for the macro to check to see it already exists and duplicate the copy with some type of incremental integer. Thus the first duplicate would be Working Copy 1, and if the macro is run again, the duplicated copy would be Working Copy 2, etc.
here is what I have so far:
Sub SCButton()
Dim i As Integer 'for making Working Copy 1, 2, etc.
Sheets("SCTemplate").Select 'this file will eventually be hidden and thus the user with only see the wokring copies.
Sheets("SCTemplate").Copy After:=Sheets(4)
Sheets("SCTemplate (2)").Select
'some sort of If statement here to check for the sheets
Sheets("SCTemplate (2)").Name = "Calculation"
View 5 Replies
View Related
Nov 10, 2009
I have been set a task to do and I wonder if you could point me in the right direction.
Task - extract 2000 emails from a 6000 email database
The 2000 emails have to be proportionate to the original database.
e.g.
The main database has the emails plus town and employee size ranges
Column A - Emails Column B - Town Column C - Employees
So if Column B states that 50% of the entire database is from one town, then my extracted emails must also have half from that town (1000).
Also there are around 5 employee ranges and so they need to also be proportionate to those percentages too in the final extraction.
View 10 Replies
View Related
May 14, 2009
I am trying to sort a macro out to save my sheet the same as the original when the button is clicked. When i try it from one location it is fine but from another location i get a print error, the error says prit quality is not right, when i debug it highlights: Print Quality = 600 I have tried changing it but keep getting the same error. Their maybe an easier way to do this but not being very good on VB i dont know what to do. This file is on a server and will be accessed from different locations.
View 2 Replies
View Related
Feb 11, 2009
I need to copy the Selected Sheet (Sheet name will be different each month) on a spreadsheet and paste the copy to the left of the selected Sheet. Then I need to copy and paste values the entire sheet of the sheet that the copy was made from (the one on the right). I am very new to macros, and I tried recording and manually editing the macro with no success. The number of sheets will be different always as I will be adding this to different workbooks and also because new sheets may be added to any workbook at any time. I attached my code that I came up with, as I am not familiar with code enought to "[code]" my code.
View 3 Replies
View Related
Mar 14, 2014
I have a macro which successully saves a worksheet as new file to another file path....(below)...but I can't figure out how to close this new file and return to the original file...
Dim myPath As String, fName As String
myPath = Sheets("Date").Range("C8").Text
fName = Sheets("Date").Range("C9").Text
Sheets("Sage CSV File").Copy
With ActiveWorkbook
.SaveAs Filename:=myPath & fName
End With'
View 2 Replies
View Related
Mar 3, 2014
Can I paste text inside a box on sheet 1 that automatically paste into a cell in sheet 2? I'm trying to make sheet one look more like a web page. I want to be able to create text boxes on sheet one that will automatically copy the text into a certain cell in sheet 2. Seems like I seen something a long time ago where you go to sheet2 and in the cell you want the text to show up, you type in something like =sheet1 box1 .
View 1 Replies
View Related
Nov 12, 2009
I'm trying to find a way to search a second sheet in a workbook for specific criteria outlined in a first sheet (in my attached example, from A3 downwards within the 'list of search criteria' sheet), and then to copy any secondary data found against a successful search match to the original sheet, transposed against its corresponding matched search term.
As you can see in the example, the search term 'bindi' (A4 in the 'list of search criteria' sheet) appears in the 'data' sheet 3 times - the secondary data for these occurences ('feathery', 'Fibonacci', 'glassy') is copied to the 'bindi' row on the first sheet and is offset with each copy to produce a transposed-esque effect of copy and paste.
If it's any help, there are a maximum of 9 matches for a single search term in the real document.
Thanks in advance for your help... I tried to adapt a previous solution given to me for a similar question but failed miserably. I bow humbly to your expertise!
View 9 Replies
View Related
Jun 17, 2014
I have been trying to edit a code which previously saved a copy in a new workbook to a specific folder/path. (Additionally it copies and clears some figures, but this is working as it should.)
However I would like the copy to be saved at the same location as the original workbook, regardless of the path the original workbook is saved.
I.e if I need to move the workbook containing the code to a new folder/location, when using the macro, the new copy should be stored in the same folder/location as the original one.
For now it is only saving the copy into "My Documents"
Code:
Sub Macro1()
'
' Macro1 Macro
' Macro recorded 16-02-2009 by ceng
'
Sheets("Bunker ROB").Select
Sheets("Bunker ROB").Copy
ActiveWorkbook.SaveAs Filename:= _
ActiveWorkbook.Path & Range("D3"), _
FileFormat:=xlOpenXMLWorkbookMacroEnabled, CreateBackup:=False
[Code] ........
View 2 Replies
View Related
Jan 29, 2014
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
View 1 Replies
View Related
Jun 20, 2013
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB:
Set sourceBook = Application.Workbooks.Open(sourceFilename)
Set sourceSheet = sourceBook.Sheets("Current")
Set targetSheet = NewBook.Sheets("Sheet2")
[Code].....
View 9 Replies
View Related
Sep 6, 2012
copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.
View 1 Replies
View Related
Jan 30, 2014
I am trying to create a data entry sheet to enter quotes on. When a quote is received, I click on my "Add quote" button and a userform appears. Data is entered into the userform (frmEntryForm) and returned back to the next available row.
I also need to be able to:
Edit a row by double-clicking it. When a row is double-clicked, data from that row is passed back to the userform, edited and returned back to the same row (to prevent duplicates).Validate that all fields are complete within the userform where relevant (i.e. if the work is not complete or in progress then the "Invoice Number" and "Actual Cost" fields are disabled and blanked to prevent entry (I think this is almost sorted judging by my tests)
I have attached my sheet : 2014 Gatwick Quote Log (Macro Enabled).xlsm
View 14 Replies
View Related
May 14, 2014
This work is challenging for me, now am doing Comparing the Data between One Sheet to Another Sheet, and Paste into Different Sheet.
I am Manually Comparing the Data between two different sheet, If the Data is matching, or Not matching, those data i have document in other sheet, So i have lots of records available. so manually doing its very difficult, but macro can compare the data. I will give the details of my process and example sheet is attached here....
Data 1.xls == This sheet have multiple tab with data and different order no.(Multiple Tab with thousands of records available)
orderNumberModified.xls == Modified data available. (Compare the OrderNumber to Data1.xls)
Now we have to compare the modified.xls and Data1.xls... For modified.xls have ORDERNUMBER available, that Numbers match with all tabs from Data 1.xls sheet.
If ORDERNUMBERS are matching, Need to copy the entire row from modified.xls To AVAILABLE TAB from Comparedata.xls sheet
If ORDERNUMBERS is not matching, copy the entire row from modified.xls To NOTAVAILABLE DATA tab from comparedata.xls sheet
View 5 Replies
View Related
May 26, 2013
I am trying to put togther a VBA form button click to do the following: I have several customer names all in master sheet A1 - A300. I want the code to notice that there is a new customer and generate a new sheet, naming the sheet the customers name and copying and paste the entire sheet named 'worksheet' to this newly generated sheet.
View 2 Replies
View Related
Aug 28, 2013
I want vba code to pull data from two sheet in workbook, code has to pull all data from first sheet , then pull data from second sheet and paste some particular column only below first column sheet
e.g i pull data from two sheet(ONSITE&CCI)
SHEET-1ONSITE CONTAINS HAVE 57 COLUMN
SHEET-2 CCI CONTAINS ONLY 19 COLUMN
FIRST I PULL 57 COLUMN DATA ONCE FINISH MOVE TO SECOND SHEET CCI CONTAINS 19 COLUMN BUT ITS HAS TO PASTE DATA BELOW DATA OF ONSITE TO PARTICULAR ASSIGNED COLUMN'S ONLY BUT COLUMN NAMES IN BOTH SHEET IS TOTALLY DIFFERENT
View 1 Replies
View Related
Aug 21, 2014
I'm trying to create a command button on my sheet that when clicked will find all rows in column u that read Engineering Evaluation and then copy certain cells from that row to another sheet. The kicker is that this button will be used over and over again as more entries are entered into the log. I only want each row counted once.
Right now I get a run time error for the "For Each Cell In Application.Intersect(Range("u:u"), target)" line.
View 6 Replies
View Related