I'm trying to make cell values in a range change so they appear blank when a checkbox is checked, and when it is unchecked, I need the original value to appear. I have the following so far:
Private Sub CheckBox1_Click()
If CheckBox1.Value = True Then Range("BTS").Value = ""
End Sub
...However I do not know how to change the cells back to the original value before it was made blank.
I'm setting up a payroll for several employees in one workbook. I start from the particular employee's worksheet and then I need to go to another sheet where various information is stored and then come back to the original employee's sheet. The current macro works fine if the various information is stored on each employee's worksheet but I can't figure out how to go to another sheet and then come back to my active cell in employee sheet.
[Code] .....
I have a form in vba with two tabs. Both the tabs are different sizes.
The first tab is quite large and the 2nd tab is smaller.
When I click the 2nd tab it shrinks the form but then when I click back to the first form it makes it the same size and the 2nd tab and cutting out key info.
Is there anyway I can resize the 1st tab again to go back to its original size?
I have a workbook with 7 sheets. Each sheet has about 9 different macro buttons that are repeated all over the sheet in various locations. I want to return automatically to the sheet and cell that was last active before running a macro.
View 2 Replies View RelatedI have a workbook where I have columns requiring entry from A to AD. I have set conditional formatting in column A to show a colour if there is an entry in column AD. I would like to use a macro to always freeze panes in column D (to show the data in the first 3 columns) and the macro would then show column AD in the other frozen pane/split.
As there will always be an entry in column A but not always in column AD I want to be able to select any highlighted row in column A , run the macro and the cursor will be showing in column AD on the same row ( relative reference?) thus showing the entry in AD next to the other info in columns A, B and C.
At the moment I have a macro that unfreezes my header row and is set to always choose the "next empty cell" but I don't know the code to change it to get what I want. Currently if I select any entry in column A e.g. row 100 and run the macro I find the cursor showing in AD2! Of course I would like to run another macro to return back to A on the same row too.....
The problem is when I highlight a row with some color the original color of the row is gone, so I tried this code, and again, it's removing the original format and color for the row This is the code from McGimpsey & Associates : Excel : Highlight row with background colors
Code:
PrivateSub Worksheet_SelectionChange(ByVal Target As Excel.Range)
Const cnNUMCOLS AsLong=256
Const cnHIGHLIGHTCOLOR AsLong=36'default lt. yellow
Static rOld As Range
Static nColorIndices(1To cnNUMCOLS)AsLong
Dim i AsLong
IfNot rOld IsNothingThen'Restore color indices
[code].....
How can I retain the range's historical color so that when I deselect the row it reverts properly?
I'm trying to achieve a search of a sheet using a selection in a listbox on my userform and then return a value of 'true or false' to my checkbox.
My code is below;
With Sheets("JobChecklist")
Set r = .Columns("b").Find(Me.ListBox3.Text, , , xlWhole)
If r Is Nothing Then
Exit Sub
End If
ff = r.Address: n = 0
Do
n = n + 1
ReDim Preserve a(1 To 6, 1 To n)
For i = 1 To 3
a(i, n) = r.Offset(0, 1).Value
Next
Set r = .Columns("b").FindNext(r)
Loop Until ff = r.Address
End With
With Me.CheckBox30
If a.Value = True Then
CheckBox30.Value = True
Else
CheckBox30.Value = False
End If
End With
End Sub
I'm using Excel 2010 and I applied a Data Filter to a simple table. I then messed around with the drop downs in each column, sorting the data by different criteria. After doing this, is there a simple way to get the table to revert back to its original order/form?
View 3 Replies View RelatedI would like to create a qestionairre with checkboxes used to answer the question "Do you need____" (Check if yes). On the following workbook I would like a list of all items needed, and a list of items not needed on yet another workbook.
Is there a way to create these lists without having blanks for values that are not true? (and because Im sure there is HOW?)
I currently have a spreadsheet with a userform that has multiple checkboxes. I want these checkboxes to change the value of cells depending on whether or not they are checked. 1 for not checked, 2 for checked. The column of the named range the cells are in is constant for each checkbox (though it is different for each checkbox and some checkboxes will need to change the value of a cell in multiple columns). The row changes depending on the value of a combobox on the userform. I have sorted out a code that works, but it seems very long, slow, and inefficient. I'm hopping someone can show me a better way to do it.
Private Sub CmbFinish_Click()
Dim rClSkills As Range
Dim rClLookup As Range
Dim var1 As Integer
Dim iDecision As Integer
Set rClSkills = Range("TblClSkills")
Set rClLookup = Range("ClassLookup")
iDecision = MsgBox("Are you sure you wish to change Skills?", vbYesNo, "Continue?")
If iDecision = vbYes Then
var1 = Application.WorksheetFunction.Match(cboClass.Value, rClLookup, 0)
If CboAppraise.Value = True Then.............................
i had to change the color of cell to yellow if the cell content is "N/A"
i had write few lines but don't know how to move in a range cell by cell
I am trying to create a data entry sheet to enter quotes on. When a quote is received, I click on my "Add quote" button and a userform appears. Data is entered into the userform (frmEntryForm) and returned back to the next available row.
I also need to be able to:
Edit a row by double-clicking it. When a row is double-clicked, data from that row is passed back to the userform, edited and returned back to the same row (to prevent duplicates).Validate that all fields are complete within the userform where relevant (i.e. if the work is not complete or in progress then the "Invoice Number" and "Actual Cost" fields are disabled and blanked to prevent entry (I think this is almost sorted judging by my tests)
I have attached my sheet : 2014 Gatwick Quote Log (Macro Enabled).xlsm
I need a checkbox (actually a few but I will use the same code and change the name and cell reference) to do the following
Checkbox in A1 is ON by defaultB1 is 100User can free change the value of B1 when checkbox is onWhen checkbox is OFF"100" (or whatever number entered by the user) gets storedB1 changes to a relatively large number "9999"B1 changes cell color to grey and is locked for editWhen checkbox is ON againThe value stored previous to checkbox turned OFF is restored back to B1B1 changes back to normal cell color (no fill or white)B1 is unlocked and user can edit the cell
If I ask in a macro to open sheet containing a fax header, copy it, then how do I tell Vb to return to the original sheet to paste. There many sheets that require this from a button click on the sheet and instead of storing the graphic in all sheets I just want 1 copy so file closes faster. I would normally just name the original sheet, but this will change with every sheet.
View 13 Replies View RelatedI need to know how to select the sheet the user was on at the time they ran the macro. The macro has to select (because I'm not yet smart enough to avoid all the selecting...) cells on other sheets, but I want to return to the sheet they started from at the end of the macro.
Unfortunately, they create these sheets themselves, and I have no idea what they will be named, or where they will be, or what their code numbers will be. They could delete them at any time and rearrange.
Sorry if this is a really dumb question. I suspect it is, but I can't find out how to fix it, and most people are smart enough to avoid the selects so I suspect it isn't an issue for them.
The code prints a series of sheets. Afterwards these sheets are "group"ed together. The code can be accessed from 2 different sheets. I need to figure out how to get rid of the grouping and return to the original sheet.
Private Sub CommandButton1_Click()
Sheets( Array("Pipe", "Pipe Flow")).PrintOut
UserForm1.Hide
End Sub
I am wondering how you can change Excel's original file creation date. You can find it by right-clicking on a speadsheet icon then going to:
File - Properties
Custom Tab
Click on Advanced
Look for a field called "Date Created"
Some dates you can edit/change, but I haven't figured out how to change this one yet. I'd like to know because I have a need to change the date on a particular spreadsheet.
I have a worksheet with various data autofiltered. I know when I filter on one of the fields, the drop down arrow becomes blue. If I filter on one or more fields, finding which fields I have autofiltered can become hard to find.
This is my question -- Can I put a button or some type of one touch command were I can take those autofilters off and return the worksheet backs to its original state before I autofiltered?
I have been using different keywords to find what I need. I have 3 checkboxes: cash, amex, other. I have a subtotal cell. When the appropriate checkbox is checked, the amount from the subtotal cell will auto go to the cell next to the checkbox. Is this VB?
View 6 Replies View RelatedCol ACol BCol CCol DCol ECol F
row 1811TAX CONSIDERATIONS1TAX CONSIDERATIONS
row 1911TAX CONSIDERATIONS#N/A
row 2011TAX CONSIDERATIONS#N/A
row 2121FLYING FALCON1TAX CONSIDERATIONS
row 2221FLYING FALCON#N/A
row 2321FLYING FALCON#N/A
row 2431IN COMMAND1TAX CONSIDERATIONS
row 2531IN COMMAND#N/A
row 2631IN COMMAND#N/A
I have 5 coulmns of data and in col F I have the following formula in row 18
=VLOOKUP(E18,$C$18:$D$800,2,FALSE)
the results come back " TAX CONSIDERATIONS"
however the same results comes back in row 21 and row 24......how can I modify this lookup to change when column B changes
I have a csv file which I opened in excel file then i converted the csv to excel columns format using the text to columns delimited.
Now I need to change it back to its original form which is the csv.
Here's my formula:
=AND([@[Tenure (Yrs)]]>=5,[@[2016 Sales]]>=150000)
(Where should I enter high and low? Do I need an if formula nested into it?)
I'm trying to get it to read if the customer reads both criteria which is they've been there 5 years and over 150000 sales =
High if not Low.
I want to have a small button at the top of the sheet that when pressed, will automatically reset all filtered autofilters back to show all.
View 9 Replies View RelatedI was wondering whether there is an easy way to change a formula containing a named range back into it's original cell reference in VB. For example I have a cell saying =cogs2008/revenue2008 and I want to change it back into =A2/A3. Any ideas?
When I click a Command Button I want a label to change color FIRST and THEN a message box to appear.
I use the following code, but what happens is: FIRST, the message box appears and THEN the label changes color, which is the wrong order. The label needs to change color FIRST.
Private Sub cbA_Click()
newcolor = vbWhite
ActiveSheet. OLEObjects("label1").Object.BackColor = newcolor
MsgBox "done"
End Sub
I am trying to use VBA to change the caption of checkboxes in "Sheet 2" when I change the value of a cell "A1" in "Sheet 1".
This code is working:
Private Sub Worksheet_Change(ByVal Target As Range)If Intersect(Target, ActiveSheet.Range("A1")) Is Nothing Then Exit Sub
Worksheets("Sheet 2").CheckBox1.Caption = "New Caption"End Sub
But there are 6 checkboxes in Sheet 2 and I would like to do something like this:
Private Sub Worksheet_Change(ByVal Target As Range)If Intersect(Target, ActiveSheet.Range("A1")) Is Nothing Then Exit Sub
For i = 0 to 5Worksheets("Sheet 2").Control("CheckBox" & i+1).Caption = "Box" & i+1Next iEnd Sub
This doesn't work.. So I guess the Control-function is wrong.
I am trying to create a macro, that ultimately does the reverse of one written a while back.
I have created a macro that exports "Roster_Data" to "envision_Roster" in .csv style formatting. What I want to achieve is reverse engineer the macro to return the data back to a similar state.
I am trying to transpose column D into rows that correspond with dates in column c in a sheet called "OutputView" this in essence is similar if not exactly the same as the original worksheet "Roster_Data"
I have split the macro I am working on into three separate modules.
Module 1 - Initial Export of "Roster_Data" to "envision_Roster"
Module 2 - Format and output worksheet to find MAX date and MIN date and produce top rows of data
Module 3 - Analyse, Undertake Logical Tests of data, and transpose to suit (Replicate the initial "Roster_Data" view)
I'm having trouble visioning this altogether so I've been starting with basic code to output basic stuff, but I still can't relate this back to my data.
[Code]....
I need to change the backcolour of some textboxes on a userform that is populated with percentage figures from a sheet, ie:
10% (a positive percentage) textbox backcolour = red
-10% (a negative percentage) textbox backcolour = green
Below is some code showing my attempts up to now, but obviously I can't make it work.
VB:
Private Sub Textbox1_Change()
If Me.Textbox1.Value < 0 Then
Me.Textbox1.BackColor = vbGreen
Else
Me.Textbox1.BackColor = vbRed
End If
End Sub
I have a sheet with many active x check boxes already created but with visibility off. I want code that turns on the visibility, repositions, and checks certain check boxes whose name is based on values in an array named configs.
Here is the code with the problem line indicated:
[Code] ........
The repositioning and visibility work fine. I get an "object doesn't support property or method" error on the indicated line. What is the proper syntax to do this?
I have a userform that has 28 checkbox's that we go through that we check which ones apply to a report.. To keep those boxes checked as the supervisor's cycle through the reports, I am leaving a 28 digit code next to the report which is created as they check/uncheck the proper checkbox's.
[Code].....
So if say CheckBox10.value = True, then the 10th digit of the ID will change to 1 while keeping the rest of the ID the same.