Vba Code: Copy To Another Sheet Fails

Mar 25, 2007

Error:
Run-Time Error: 438
Object doesn't support this property or method.

Two things to note: This code was placed in the worksheet, something new I am trying and two the error line is not highlighting in yellow (as it normally does) indicating the line w/ the infraction.


Option Explicit

Sub QuickView()

Dim Wss As Worksheet 'Source Worksheet
Dim Wsd As Worksheet 'Destination Worksheet
Dim LRow As Long

Set Wss = Workbooks("TGSItemRecordMaster.xls").Worksheets(" Record Creator")
Set Wsd = Workbooks("TGSItemRecordMaster.xls").Worksheets("Quick View")

LRow = Wss. Cells(Rows.Count, "w").End(xlUp).Row - 4

Wss.Range("W3" & LRow).Copy Wsd("A3")

End Sub

[/code]

View 9 Replies


ADVERTISEMENT

Workbook Open Code Fails

Oct 4, 2006

I tried testing, msgbox displays the correct last modified file "MMO Activity Report 09-29-06.xls" in path D:MMOWorkfile but I was not able to open the workbook.

Sub testGetNewestFile()
MsgBox NewestFile("D:MMOWorkfile", "*.xls")
Workbooks.Open (NewestFile("D:MMOWorkfile", "*.xls"))

View 9 Replies View Related

Code Fails When Called From Private Sub

Aug 22, 2007

I'm having a hard time with this piece of

Private Sub Assign1Combo_Change()
If Range("ComboVisible") = False Then Exit Sub
Assign1_Download
End Sub

Symptoms:
- As soon as this is used, Excel/VBA can't select any range on the worksheet. For example, the following code (within the sub Assign1_Download) no longer works:

Range("firstdata").Select

Excel/VBA doesn't select that Named Range or any other range I try (ex. A1). - This problem only happens in Excel 2003. In Excel 2002 everything works fine (can make any selection).

View 5 Replies View Related

Macro Code Fails On Other Computers/PC's

May 29, 2008

I have a workbook with macros that run on my laptop, but when I email the workbook to another user and the macro is executed I get a subscript out of range message?
Both Excel versions are the same.
Environments are the same.?

View 4 Replies View Related

Chart Code With SetElement Fails In Pre 2007

Aug 22, 2008

I wrote this code so that someone else can keep track of a certain bond. It will provide him with returns and a chart between 2 periods. I wrote it on Office 2007 and it works for me, from the begining I wrote the code in an office 97-2003 compatible file. The worksheet is attached.

Sub Grafico()
Dim FechaGraficoInicial As Date 'Fecha de referencia para el rango
Dim FechaGraficoFinal As Date
Workbooks("Julius Baer.xls").Activate 'Para evitar un error, NO BORRAR
Worksheets("Precios").Activate
Columns("G:G").Select
Selection.ClearContents
Workbooks("Julius Baer.xls").Activate
Worksheets("Rentabilidades").Activate
FechaGraficoInicial = Worksheets("Rentabilidades").Range("B22")
FechaGraficoFinal = Worksheets("Rentabilidades").Range("B23")
i = 0
Condicional = 0 'Determina si el grafico se hace o no..........................

View 2 Replies View Related

Macro Code Fails When Run On Workbook On Server

Mar 11, 2008

I have used the following piece of code to stop error checking in my excel spreadsheet:


Option Explicit

Private Sub Workbook_Open()
' Application.ErrorCheckingOptions.BackgroundChecking = False
End Sub

The problem is - works fine on my computer, but when distributed on the server the folloeing error is returned:

Run-time error '438':
Object doesn 't support this property or method

View 9 Replies View Related

Excel 2007 :: Code Fails To Put Results In Cell

Jan 23, 2013

I have the equivalent of Vlookup code(I couldn't get vlookup to work correctly) I am using Excel 2007. I have an array 2 cols x 1652 rows. I have another column of 6264 items. If a text item in the first column of the array matches a text item (minus 3 characters) in the longer column, I place the matching row from the array next to the item in the longer column. Whats not working is that the text never gets put in the cell.

Code:
Sub Macro1()
'
' Macro1 Macro

[Code]....

View 7 Replies View Related

Copy Worksheet Between Workbooks Fails

Jun 11, 2008

I've the following inherited macro which basically opens a CSV text file and copies the contents to another workbook + other things.

Sub GetFile()
' GetFile Macro
Dim ws As Worksheet
Sheets("Menu").Select
' Set Path and Filename and Import
PathName = Range("E4").Value
Filename = Range("E5").Value
ControlFile = ActiveWorkbook.Name
Workbooks.Open Filename:=PathName & Filename
' Setup Temp worksheet
TabNameTemp = "Temp"
' TabName = Range("A2").Value
TabName = "CSV File"....................

with the error: "Run-time error '1004':. Excel cannot insert the sheets into the destination workbook, because it contains fewer rows and columns than the source workbook. To move or copy the data to the destination workbook, you can selct the data, and then use the Copy and Paste commands to insert it into the sheets of another workbook." Nothing has changed in the CSV file or the Workbook with the macros.

View 2 Replies View Related

Web Query Fails When Sheet Locked

Jan 26, 2007

I have a web query that returns a value to the first column of the row.

I have unlocked the cell (Format -> Cells, Protection Tab, uncheck the Locked check box).

If I run my web query, it works fine. If I then lock the worksheet, the web query fails, even though the cell that I am returning the web query to is not locked.
Code below:

Sub create_pay_proposal(pUserId As Range, pRespID As Range, pWorksheet As Worksheet, pRange As Range, pParms As String)
Dim strURL As String

'On Error GoTo WebConnError 'Error handling if unable to connect to database/URL

strURL = <removed For security>

With pWorksheet.QueryTables.Add(Connection:= _
"URL;" & strURL, Destination:=pRange)
.Name = "fnd_web"
.FieldNames = True
.RowNumbers = False
.FillAdjacentFormulas = False
.PreserveFormatting = True
.RefreshOnFileOpen = False

View 5 Replies View Related

Sheets Copy Method Fails On Second Execution

Dec 26, 2006

When I call the following code from my Visual Basic 6 program to an excel spreadsheet, it runs great the first time, but then fails everytime after that unless I close vb6 and reopen it.

Private Sub lblGroundScheduleExcel_Click()


'return day of week
'MYHEADERDAY = Format(Now, "dddd")

'get day
''MyDay = Format(Now, "dd")
MyDay = Format(DTPicker1.Value, "dd")
'get month
''MyMonth = Format(Now, "mm")
MyMonth = Format(DTPicker1.Value, "mm")
'get year
''MyYear = Format(Now, "yyyy")
MyYear = Format(DTPicker1.Value, "yyyy")

View 3 Replies View Related

Show Custom Error Message If Opening Workbook Macro Code Fails

May 17, 2008

I cannot figure out how to get my error handler to work, or actually, not work. It seems to work fine when there is an error, but the code still gets read even when there was not an error. Basically, I am trying to open a file, which may or may not be there. When it is not there I want a message to pop up informing the user. However, when the file is there and it opens, the error handler still gives the message box. Any ideas what I am doing wrong?

Private Sub btnOK_Click()
Application. ScreenUpdating = False
Dim LCSfile As String
LCSfile = frmSelectFile.Listbox1.Value
On Error Goto ErrHandler
Workbooks.Open Filename:=sPath & sDate & "" & LCSfile & "QUANT.CSV"
ErrHandler:
MsgBox ("File is not quantitated. Please select another file.")
Application.ScreenUpdating = True

End Sub

View 2 Replies View Related

Excel 2010 :: Select Sheet Fails?

Mar 2, 2012

I want to activate a sheet in the workbook.

Sheet names: "Sheet1", "Main"

When I write the code

Sheets("Sheet1").select 'fails

Why is this? This was the command that was from the record macro feature. I am using excel 2010.

View 9 Replies View Related

Creation Of Pivot Table On Existing Sheet Fails

Dec 8, 2011

I am trying to create a pivot table on a worksheet that already exists using VBA, but I am getting an error (Invalid procedure call or argument).

Code:

' Create the pivot table on a new tab
ActiveWorkbook.PivotCaches.Add(SourceType:=xlDatabase, SourceData:= _
source_data).CreatePivotTable _
TableDestination:="DJG Clients with Multiple Fee E", TableName:="PT_ClientsMultipleFeeEarners", DefaultVersion:= _
xlPivotTableVersion10
ActiveSheet.PivotTableWizard TableDestination:=ActiveSheet.Cells(3, 1)

But if I just send the pivot table to a new sheet it works fine -

Code:

TableDestination:=""

View 2 Replies View Related

Copy Method Of Worksheet Class Fails After Running X Times

Mar 12, 2008

I am encountering a problem with worksheets.copy that occurs after the copy method is called a certain amount of times. My issue is similar (exactly the same?) to what is described in these threads:

- Worksheet Copy: Method 'Copy' of Object 'Worksheet' Failed
- Copy Method of Worksheet Class Failed in Loop Code

In my case, after running this code 40 times, it fails.

If loc_after Is Nothing Then
.COPY after:=Worksheets(sht_name_orig) 'throws error here after being called 40 times
Else
.COPY after:=loc_after
End If

I would like this code to be able to run more than 40 times. I have read Dave's suggested solution regarding creating a worksheet template:
http://www.ozgrid.com/Excel/excel-wo...-templates.htm

However, in my situation the client has specifically asked that the report come as a single stand alone excel file with no add ins. In addition, I am copying several different worksheets, not just one single template that is being used over and over.

View 7 Replies View Related

Protected Sheet - Macro To Unprotect, Refresh Sql Query & Re-protect Fails

Feb 21, 2007

I have a protected worksheet containing an SQL query. I have two cells on the worksheet unlocked so that users can enter fresh parameters to feed the query.
Because I have to use MS Query to interrogate our SQL server (current IT decree), the query won't support parameters directly when the query cannot be represented graphically - so I have to manually edit the sql command text and then refresh the query - or at least that was why I wrote the code below

The problem: My macro won't unprotect the sheet before it calls the SQL.it therefore won't update the sheet to detail the DSN, command text and number of parameters (latter should be 0) - info just used to verify queryit won't run the query / return the data as the sheet is still protected Comment: I have had to remove sheet protection in order to allow the sql to execute and return data. If protection is removed, the query does execute and return data ( changes in the "parameter" cell contents do cause the query to be correctly modified)
I could comment out the debug info but the query still doesn't return data if the sheet is protected.

Activesheet And worksheets(ndx) where ndx has been defined As ActiveSheet.Name
I apologise If my post Is difficult To follow - especially the code.

Sub AgedStockParameters()
nmb = ActiveWorkbook.Name
ndx = ActiveSheet.Name
Workbooks(nmb).Activate
Worksheets(ndx).Activate
ActiveSheet.Range("A1").Select
WkshtQryCon = Workbooks(nmb).Worksheets(ndx).QueryTables(1).Connection
ActiveCell.Value = WkshtQryCon
Range("A2").Select
WkshtQryFld = Workbooks(nmb).Worksheets(ndx).QueryTables(1).CommandText
ActiveCell.Value = WkshtQryFld.......................

View 2 Replies View Related

Copy Sheet Without Code

Mar 6, 2008

I am having a pricelist that is coded, If someone wanted to copy the pricelist to a new file. Is it possible to just copy the tekst without the codes?

View 9 Replies View Related

VBA Code Not Copy Data To Other Sheet

May 16, 2014

My vba code to copy row A110 of "Mod" worksheet to A9 in Table A of "Email Data" worksheet using some logic like - in Mod worksheet it searches for data i.e. "COUNT(DISTINCTM.TRANS_ID)" if found then it searches for "row selected" and it searches for data between the two . And then it pastes 34864 to A9 of Email Data worksheet . I have written code for this but it doesn't works.

Also i need vba code similarly for searching "CAP_ACTV_LN_SEQ" and then the values inside it to be pasted i.e. row 128 and row 129 in Mod worksheet to be pasted in table e in Email Data worksheet . Remember there are 2 rows but there can be any number of row anytime.

Also the vba code for "NULLPOINTEREXCEPTION'" is there in the sheet which is working fine. It can be used for your reference.

Button for Vba code to work is present in "Email Data" worksheet.

code for "COUNT(DISTINCTM.TRANS_ID)" given below also excel sheet attached : Worksheet .xlsm

View 6 Replies View Related

Code To Copy Cells From One Sheet To Another

Aug 25, 2009

I am trying to create a a command button using the control tool box that will take info from specif cells from sheet1, and paste them into sheet2 in specif cells, but the most important part is that it has skip to the next row after each paste.

for example take A1, B1,C1 from sheet 1 paste it to B1, C1, D1 on sheet2, then take A1,B1, C1 from sheet1 paste it to B2,C2,D2 on sheet2

View 5 Replies View Related

Maro Or Code To Copy Row B10 To Another Sheet As A Record

Nov 3, 2009

a macro or code to copy row B10 To another sheet as a record but paste it down a row as i keep overwriting previous paste, tried offset etc but still stuck. I HAVE THIS SAME PROBLEM ON 2 SPREADSHEETS NOW. All i need it to clone the top row everytime data is put there, but where the data goes to paste it down a row so creating a record. Also i need another macro to search the G10 cell of the same row for the word replace and if so copy that row to another sheet as well.

View 9 Replies View Related

Code To Search For Items Copy To Different Sheet And Delete Them

Jan 27, 2014

I have a workbook with one sheet (called "Pipeline") and another sheet called "Completed". The Pipeline sheet is used to keep track of all of the tasks that the team are working on, and then when the task is completed, it needs to be moved to the "Completed tab".

I currently have managed to write some code that looks for items marked "completed" in row G of the "Pipeline" sheet, then copies them over to the "Completed" tab, and then deletes the row from the "Pipeline" sheet.

There is one macro to copy the completed cells (called "Transfer"), and then another to delete the cells (called "Delete"). I then just have macro called "Clean" that just calls the transfer macro, and then calls the delete macro.

Often, there are 6 tasks marked complete, and only some of them will be copied over, but all of them will be deleted (a disaster).

Transfer Macro : [Code]....

Delete Macro : [Code]....

Overall Macro : [Code]....

View 7 Replies View Related

VBA Code To Copy Data From Multiple Sheets Into One Sheet

Sep 26, 2013

I have a workbook with 10 sheets.

Each sheets has data starting row 14 and column B with row 13 being column Headers.

I want to copy data from each sheet, having column headers suppose A, F & G in to a single sheet. The position of column headers I want to copy are different in each sheets

Means macro will go to sheet1 first, he will copy data from column headers A, F & G and paste in new sheet suppose main.

then macro will go to sheet2, he will copy all the data from column headerA, F & G and paste it in main sheet after the last used row and so on.

View 8 Replies View Related

Delete Residual Code From Worksheet After Sheet Copy

Oct 25, 2006

I have a worksheet containing code to hide itself when the sheet is deselected:

Private Sub Worksheet_DeActivate()
Sheet16.Visible = xlSheetVeryHidden
End Sub

After unhiding this sheet and modifying it, I copy it. This new copy becomes the 'production' copy, and the self-hiding sheet is blanked, leaving me with a hidden blank template and a new sheet. However, the self-hiding code is copied along into the new sheet. I'm looking for a way to delete the sheet code from the copy. The best I've found is how to remove a module from the workbook.

Sub New_Sheet()
ActiveSheet.Copy After:=Sheets(1)
ActiveSheet.Name = Range(" F8").Value
Sheet16.Visible = True
Sheet16.Select
Range("B13:F22").ClearContents
Sheets(2).Select
ActiveSheet.Shapes("Button 1").Delete
Range("A8").Select
ActiveSheet.PageSetup.PrintArea = Range("A1:R35").Address
Call Sort_Sheets
End Sub

View 5 Replies View Related

Copy & Paste To Protected Sheet Macro Code

Apr 1, 2008

how to unprotect the sheets in order to be able copying datas to to certain cells.

The unprotection works but only when I start the macro the second time. I do not understand why.

After I did the updates I want to reprotect the sheets but that seems not to work in my case.

ActiveSheet.Unprotect Password:="my_password_here"
'unprotect the sheet

ActiveSheet.Protect DrawingObjects:=True, _
Contents:=True, Scenarios:=True, Password:="my_password_here"
' Reprotect the Sheet

View 7 Replies View Related

Code To Copy Data From Dif.cells In A Sheet To A Single Row In Another Workbook

Mar 3, 2008

I have a workbook ("CaTr") Sheet1 has data ranging ("B2:I41").

There are about 30 cells values (scattered) which needs to be copied in a workbook "CA_Log" in one single next available row .

As soon as the CaTr.sheet1 is filled I want the operator to click a button to trigger this event. Then the sheet1 in workbook CaTr should be saved as "G3" cell value.

View 14 Replies View Related

Code 'To Invoice' Copy The Filtered List, And Paste On Sheet

Oct 22, 2008

I have recorded a macro to filter data on sheet 'To Invoice' copy the filtered list, and paste on sheet 'Invoice' in C16.

The code just keeps looping (not looping in a code sense, it just seems to keep flickering the screen like its going over & over) until it locks up 5-10 seconds-ish and then I have to re-start Excel.

The range B2:E22 is not always populated, it could possibly be B2:E2 (one row), I dont know how to copy the exact data so I expanded the range to what I think would capture any eventuality....

View 9 Replies View Related

Copy/paste-button - Wrong Reference Code In Sheet 2

Jul 8, 2009

i have a button that copies data from cell
A5:K5, and pastes it in Sheet2 of my workbook.

The data is ordered like this

------
------
------ button1

------
------
------ button2

------
------
------ buttonX

I have like 40 buttons attached to 4 rows each. And in that group of rows, i have some cells with an IF= formula, and some minor coding.
The problem is: If i press button 3,4,17,29 before i press every other button before that. I get an reference code fail at the cell.

If i press the buttons in order. Like 1,2,3,4,5,6,7 - it appears smoothly.

More info: The button copies data from for example A5:K5 and pastes it into the next blank row of sheet2. But i want to be able to press button 2 before i press button1, without getting an error in my =IF cell.

If i press the 40 buttons in a row, and then starts to mix up the button pressing. It appears smoothly.

View 9 Replies View Related

Copying Cells From One Sheet To Multiple Sheet And Naming Sheet As Copy Text?

Dec 24, 2013

I want to do a loop where you can copy say A3 worksheet 1 then add another sheet naming the work sheet "A3" then copying A3 worksheet 1 to A1 "A3". After that looping to A4 to a new work sheet naming the work sheet "A4"copying the value to A1 "A4", etc...

Is there a simply way of doing this loop? I can probably fit my other coding into the structure.

View 4 Replies View Related

Passing Variables And Values Between Sheet Code And Module Code

May 13, 2009

I have some buttons in different sheets in an excel file, each button has its own code, that is the reason I can not move the code related to each object to another location (sheet or module).

And I have one piece of code in Module1 (Auto_load) in order to execute automatically this routine every time file is opened. Inside "auto_load" routine I initialize some values of some check buttons,options buttons and positions of some objects in diferent sheets, but I can not pass the value of variables between Module and Sheet's code even when I declare as public variables and/or function.

I have the following structure: ...

View 11 Replies View Related

Using Code To Email A Sheet But Need To Strip The Code Before Sending

Feb 2, 2009

I am using the code below that I got off of these forums to email a particular sheet in my workbook, but I need to strip all of the VBA code and the command button from the sheet being sent.

View 14 Replies View Related

Copy Visible Rows And Paste To Visible Rows In Same Sheet Of Excel / VBA Code

Oct 27, 2013

I need to write a macro where i need to copy set of rows from few columns of an excel sheet to another set of columns in same sheet . My excel looks something like this...

Product
F1020
F1023
F1025
F1120
F1123
F1125

[code].....

Now when i filter this table for Product PR01 only rows 1,3,4 will be visible while the other rows remains hidden

I WANT TO COPY ROWS COMING UNDER COLUMNS

F1120
F1123
F1125

TO

F1020
F1023
F1025

when i use the code

Selection.SpecialCells(xlCellTypeVisible).Copy

i get to select ones those are visible but i am not sure how i can PASTE them to rows visible under column f1020 to f1025

Tried this in a frantic effort

Selection.SpecialCells(xlCellTypeVisible).PasteSpecial xlValues

But got an error for " multiple selection"

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved