Copy/paste-button - Wrong Reference Code In Sheet 2
Jul 8, 2009
i have a button that copies data from cell
A5:K5, and pastes it in Sheet2 of my workbook.
The data is ordered like this
------
------
------ button1
------
------
------ button2
------
------
------ buttonX
I have like 40 buttons attached to 4 rows each. And in that group of rows, i have some cells with an IF= formula, and some minor coding.
The problem is: If i press button 3,4,17,29 before i press every other button before that. I get an reference code fail at the cell.
If i press the buttons in order. Like 1,2,3,4,5,6,7 - it appears smoothly.
More info: The button copies data from for example A5:K5 and pastes it into the next blank row of sheet2. But i want to be able to press button 2 before i press button1, without getting an error in my =IF cell.
If i press the 40 buttons in a row, and then starts to mix up the button pressing. It appears smoothly.
I'm trying to create a command button on my sheet that when clicked will find all rows in column u that read Engineering Evaluation and then copy certain cells from that row to another sheet. The kicker is that this button will be used over and over again as more entries are entered into the log. I only want each row counted once.
Right now I get a run time error for the "For Each Cell In Application.Intersect(Range("u:u"), target)" line.
Basically, I need to copy and paste upon certain condition (references) and paste related-datas in another sheet corresponding with these references. Every references are organized by lines with indicators on columns.
In attached file, see: - worksheet ANALYSIS: * datas in E2, G2, D18, D19, D20, D21, D22 that needs to be copy based on reference in C2, * then need to find this reference in worksheet called GROUP SAVE, * and based on this reference, paste above cells value in corresponding "Indicators" column number
THEN, I will have to do pretty much the same with subgroup data. But I can figure out for this second step that request same manipulation.
I'm exporting a csv file from a membership database with the attendance of members. With a macro i open the file and copy the contend to excel. With the macro the column for the date has *randomly* wrong formats. Example the date in column B:
Aasia Tallah19-03-2009 19:33 Aasia Tallah17/03/09 7:49 pm Aasia Tallah15/03/09 7:53 pm Aasia Tallah14/03/09 6:34 pm Aasia Tallah03-12-2009 20:05 Aasia Tallah03-11-2009 19:56 Aasia Tallah03-10-2009 19:54
I try to change the format of the column, but that does not work. Rows 2,3 and 4 seem to be text but they are not. If i access the edit bar for example the 17th of march and store without changing anything, it changes to the format of the first row. That is how i want it. If i copy the column by hand, every thing is fine.
All of the following i tryed: - format date column of the csv before copying... failed - copy special with only pasting values... failed - preformat the column i paste the date to... failed - delete the sheet i paste to and create a new one... failed - copy the macro to a new workbook... failed
I have recorded a macro to filter data on sheet 'To Invoice' copy the filtered list, and paste on sheet 'Invoice' in C16.
The code just keeps looping (not looping in a code sense, it just seems to keep flickering the screen like its going over & over) until it locks up 5-10 seconds-ish and then I have to re-start Excel.
The range B2:E22 is not always populated, it could possibly be B2:E2 (one row), I dont know how to copy the exact data so I expanded the range to what I think would capture any eventuality....
I'm having trouble calling a subroutine from a command button. It's puzzling because I've set up buttons before and didn't have this trouble.
Here is my button Private Sub EPConversionButton1_Click(ByVal target As Range) Convert_Hrs_EP target End Sub And here is the subroutine.
Sub Convert_Hrs_EP(target As Range) End Sub There's nothing there yet, but I keep getting error messages regarding the transfer from the button code to the subroutine.
The message is: Procedure declaration does not match description of event or procedure having the same name. The Help file says this means that my procedure has the same name as an event, but does not have the same signature. But it's not so.
I have this workbook with 10 sheets. Each sheet has macros that are called from a floating toolbar. What I am trying to do:
I want to create a msgbox that warns me when I click in a toolbar's button to call a macro that not runs in the activesheet. Something like: "This code (or macro) doesn't match (or run) with the active sheet.
Sheet 2 contains a drop down list containing names, would like to assign a Macro to a button on same sheet that would refer to sheet 3 based on certain criteria.
Sheet 3 contains columns A - K of data. 2 criteria, data in column D and column K. Column D would be the same as names in the drop down list, whereas column K refers to a constant, either y or n.
Example: If D contains "Cheddar" and K contains "Y", copy and paste A:K to Sheet1, preferably starting at row 7.
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB: Set sourceBook = Application.Workbooks.Open(sourceFilename) Set sourceSheet = sourceBook.Sheets("Current") Set targetSheet = NewBook.Sheets("Sheet2")
i am writing a custom copy/paste routine which will paste data from a selection if the cell being pasted to is not locked.
The user will select the text for coping and then launch the routine.
The routine will query for destination cell and then process the paste.
This is my routine so far:
Sub testCopy()
Dim c As Range Dim MyRange As Range Dim Dest As Range
Set MyRange = Selection Set Dest = Application.InputBox(prompt:="Select a cell", _ Title:="Paste Destination", Type:=8)
For Each c In MyRange If Dest.Locked = False Then Dest.Value = c.Value End If 'dest = ? Next c End Sub
What I need to know is how to increment the dest reference so it is in the same 'relative' position from the initial dest that c (from the selection) is in or is there a better way to do this?
I've searched for a solution on the board and the internet too but to no avail; I am trying to create a macro that will select the entire column based on a cell reference G1 which is infact a Date.
Column G to Column S are pre-defined with a specific Date in row 8. If the Date in one of these columns (G8 to S8) match with the Date in cell G1, say it finds a match with H8, then I want to copy the range F14:F2000 and paste as values in range H14:H2000. The possibility of a match found is limited to a single columns from G to S.
I am working on creating an examination questions in Excel. I want to also build in formulas in the Excel sheet so that the answers will be calculated automatically as the candidates choose the answers. I have inputed an option button from the froms toolbox beside each answers for the candidate to click to indicate the answers. Is it possible to calculate the correct answer or wrong answer with a formula when the candidate clicks on the option button ? Is there a formula that I can use?
I'm trying to perform a copy & paste operation by hand which to me should be easy in theory. I have a worksheet whose formulas have been corrupted. I have a backup of this sheet- I'd like to copy the backup sheet into the workbook. The problem is that the formulas, which reference other worksheets within the workbook, are copied over as links to the backup workbook instead of the new workbook they are being copied too. This seems simple, but how do I copy the worksheet and the references without having to go through all of the references by hand to only apply to the local book.
I need to write a macro where i need to copy set of rows from few columns of an excel sheet to another set of columns in same sheet . My excel looks something like this...
Product F1020 F1023 F1025 F1120 F1123 F1125
[code].....
Now when i filter this table for Product PR01 only rows 1,3,4 will be visible while the other rows remains hidden
I WANT TO COPY ROWS COMING UNDER COLUMNS
F1120 F1123 F1125
TO
F1020 F1023 F1025
when i use the code
Selection.SpecialCells(xlCellTypeVisible).Copy
i get to select ones those are visible but i am not sure how i can PASTE them to rows visible under column f1020 to f1025
I am trying to develop a system to allow me select different parts from multiple sheets and then add them into a bill of material on a separate sheet.
[URL] ...........
I have written some VB script the best I can and it includes a 'commandbutton' to make it easy for the user of the workbook to use.
This is how it works:
Go to 'Step 1 - Manifold 8640' tab and highlight one of the yellow cells.Once you have selected a yellow cell, you then click the 'select' button above.The value (along with other values) are copied to the 'Smart Calc' sheet.Then you go to 'Step 2 - Gland Plate' tab, select a yellow cell, click the 'Select' button.Notice how the 'Step 2 - Gland Plate' value is entered into a different group in the 'Smart Calc' sheet - this is great................BUT
The issue I am having is:
If the user goes to 'Step 1 - Manifold 8640' tab, highlights the desired yellow cell then presses the 'Select' button twice, it will add two lines of data in the relevant 'Step 1 - Manifold 8640' section....This is ok.But when the user clicks a third time, the 'Step 1' data will overflow into the 'Step 2' section of the 'Smart Calc' tab...because the script tells the data to look for the next available line to write to. This is what I am trying to avoid!
Instead, i would like a message box to popup to indicate to the user that they cannot add anymore data into into the 'Step 1' or 'Step 2' sections of the 'Smart Calc' tab until they clear the data from within the relevant section in 'Smat Calc'.
I would like to set limits on where each 'Step 1' or 'Step 2' data is written to the 'Smart Calc' sheet (so it is within its relevant section). As you can see the script basically looks for the next available cell but this isn't really good when the data 'overflows'.
Note that you are able to highlight the yellow cells in the 'Smart Calc' tab and press the delete key, it will delete the data to clear the line. That is how i designed it to work so if the user makes a mistake they are able to just delete the relevant line and enter new data.
I have a frame (Frame1) on a userform added using Microsoft Forms 2.0 Frame. I have added option buttons to the frame named OptionButton1 thru OptionButton4. I am trying to add code where certain cells are copied and pasted depending on which optbutton is selected. I tried the following code but because the option button is a frame object it doesn't seem to trigger the event.
Private Sub OptionButton1_Click()
'copy level 1 If Me.OptionButton1 = True Then Worksheets("Sheet1").Range("G10:G32").Copy Worksheets("Sheet1").Select Worksheets("Sheet1").Range("C10:C32").Select Selection.PasteSpecial Paste:=xlPasteValuesAndNumberFormats, Operation:= _ xlNone, SkipBlanks:=False, Transpose:=False End If
This works fine, my only problem is if the button that is created is actually named Button2 or 3, etc. Is there a way to assign the new button to a variable, or would it be an object? this way it wouldn't matter what it was named.
I need to copy a range of values from sheet 3 to sheet1. When I recorded macro, I got the below code. But, instead of RC in the 4th line <ActiveCell.FormulaR1C1 = "=Sheet2!RC"> I need to pass values like A1,A20 etc.
Since the values range & column to be copied would be varying dynamically, (say for first iteration it would be A1: A20 & for second iteration, I need to copy C1: C20.) how to pass these variables to the macro and use it instead of the static "RC". Whatever column I specify, it should copy from that <column>StartRow to that <column> EndRow.
Sub Updtval(StartRow As Integer, EndRow As Integer, f As Integer) Sheets("Sheet1").Select Range("A1").Select ActiveCell.FormulaR1C1 = "=Sheet2!RC" Range("A1").Select Selection.AutoFill Destination:=Range("A1:A6"), Type:=xlFillDefault End Sub
how to use VBA to write a formula in one sheet that refers to a fixed cell on the sheet to the right. The referenced sheet may have different names and it may be in a different order (i.e. not Sheet(2)) but it will always be one sheet to the right. I just want to have cell A1=(cell B2 one sheet to the right).
