Is there any way to nest a vlookup within an If statement that is capable of looking through 1 column on a separate worksheet for any of the following words "BASE" "MID" or "TOP" and then return a serial number in a separate column?
View 9 RepliesIm just going to start with the tables that will help show what i am trying to do...
TABLE 1
File #Dateid
215?
211?
27?
26?
TABLE 2
File #StartStopid
29131
214162
2183
Ok so say i have these two tables...i want to be able to look at the file # of line 1 in table 1, go to table 2 and return the id where the date from table 1 is between the start and stop in table 2. ie...in that example it should return id "2".
Column A contains numbers that repeat themselves. in column B codes are assigned to each number. numbers in column A may have multiple codes in column B. but are unique for each instance the same number may appear in column A.
what i'm trying to do is.
have the numbers in column A show only once and then have the codes for the corresponding codes appear each in seperate columns rather than all in one.
I have a somewhat convoluted problem. I am trying to develop a QA tool that compares data from a user-created spreadsheet against data from an automated spreadsheet. From my (admittedly small) understanding of Excel, this would be easy to do using VLOOKUP, however there will not be any unique IDs between two columns.
To better visualize this, imagine on Sheet A the following:
Placement Name
Ad Tag
Clickthrough URL
[Code]....
Essentially what I am trying to do compare data from a manually filled in sheet against data that would output the above, and make sure that everything matches up correctly. .
What formula should I use so that it will find the match with a 6-column table (with every other column containing the 'reference' items, so I can't use vlookup)
So that it will return the value next to the match
(instead of returning gibberish, will return a number instead)
Solved
Okay had that table setup that way because I needed separate tables ("linked" comboboxes")
So I just altered it so that the vlookup range changes dependent on the value of combobox 1.
col A col B col C
AA 1 dog
BB 2 cat
AA 1 cat
BB 3 cat
The end result is:
AA 1 dog
AA 1 cat
BB 5 cat
In this example there are two examples of AA, but they each have a different animal, so they need to remain separate. BB is listed twice, but has the same animal, so the total for them is 5. I am looking for a way to express this with with a formula. I tried using Sumifs, and it sort of works, but I end up with BB listed twice, and I don't need that to happen....
With reference to a thread that is nearly similar to my own problem:
http://www.excelforum.com/excel-gene...ml#post2076546
I have a similar problem, though maybe a little more advanced. I would like to do the exact same, but when looking at the sample.xls in the referenced thread, my data can have zero values/blank in the C-column. For instance, if C6 is blank, then the formula will not add the value in the next row. In many cases this would easily be solved through sorting, but the structure of my sheet do not allow for this. So what I am looking for, is a formula for only regarding rows where the cells in column C is <>"".
Maybe this cannot be done in a single formula, and has to be solved through VBA, but having seen some incredible solutions here, I thought I'd give it a try.
i've tried to locate a matching post for my query, although a couple have been close I havn't been able to find one which matches what i'm trying to do. I have a spreadsheet which has two columns A:PersonIds and B:Month/Year. A person id can appear many times for a given month. What I am wanting to do is to perform a unique count of person id's by month. Take the following example:
ID , Month/Year
001, Jan-08
001, Jan-08
002, Jan-08
002, Feb-08
003, Feb-08
001, Mar-08
Below is what I expect the count to total
Totals
Jan-08 = 2
Feb-08 = 2
Mar-08 = 1
I've also attached an excel file with what i've just outlined. Is there a way to do this without using VBA, but with a combination of array's and nested if statements?
Count unique entries in a column according to two specified criteria.Specifically, I am trying to count the number of days in a month a supplier has a visited.Below is an example taken from the excel:
COLUMN A COLUMN B
Date Supplier
01-ago-12 Mr X
01-ago-12 Mr X
01-ago-12 Mr X
I want a formula that allows me to see how different dates Mr X has visited in each month. So in August he has visited 8 times BUT only on 5 different dates.
In the case of Mr Y I want the formula to give the answer 5 (even though he has visited 6 times in total, he has visited on only 5 different dates).
In the case of Mr X in September, the answer to the formula would be 2, since has visited on 2 different dates in September.
I've been using the following formula from the xldynamic website detailing
sumproduct usage as a base for retrieving uniqe instances in a data series.
I've been trying to modify the formula to allow me to utilize one additional
criteria.
Original formula:
=SUMPRODUCT((A1:A20<>"")/COUNTIF(A1:A20,A1:A20&""))
Here is my formula:
=SUMPRODUCT((($O$7:$O$2710<>"")*($M$7:$M$2710="1986"))/COUNTIF($O$7:$O$2710,$O$7:$O$2710&""))
I'm trying to say how many unique instances are there for column O, where
column m = "1986?"
I've got an interesting problem which I haven't been able to find an answer for.
A B
PR Yes
PR Yes
PR Yes
DN Yes
DN No
DN No
I need to count how many unique values in column a have every row in column b the same value. So counting for yes values, PR would equal one but DN would equal zero.
I used this formula to find out how many unique files had yes values, now I need to find out how many files only have yes next to them.
=SUMPRODUCT(($B$2:$B$14="Yes")/COUNTIFS($B$2:$B$14,$B$2:$B$14&"",$A$2:$A$14,$A$2:$A$14&""))
For example, each job has a specific ref number and within that job ref number there is a number of lines of data, some of which we ignore and some of which we include. Each job will have a planning time using an old methodology (Planning A), a planning time using a new methodology (Planning B) and an actual time. There are a few other variables too such as the category of work.
I am trying to count the number of each unique ref no. within the sub category of work I am looking at (there are circa 50 sub categories of work). Each ref no. will only have 1 combination of work cat and sub category.
For example: ....
ColA has a range of names.
ColB allocates ColA entries to either of two categories by entering 'cash' or 'credit'.
I need help writing a formula to make a unique list of the names in ColA that have 'cash' in ColB. I'd prefer not to use autofilter.
I would like to copy values corresponding to a unique identifier from one sheet to another, using the vlookup function. The problem is that after a certain cell the values are given as N/A even though they are present in the sheet I want to copy them from.
View 3 Replies View RelatedIn the below data set i have the data ranked by branch and center by value. I am trying to create a summary page that looks at the data set by branch center and rank and brings back the debtor code. The letters above headers represent the columns.
a b c d e f g
BR
CNTR
DEBTOR NAME
2012
Rank
[Code].....
I have 2 columns of data in one sheet that list dates (say Master Dates) and transactions (say Master Transactions).
In another sheet i would like a formula that can choose the correct transactions that fall between certain dates (call Date Beginning and Date End) and generate a list.
i have tried this array:
If((Master Dates>=Date Beginning)*(Master Dates<Date End),Master Transactions,"")
Problem with this is when used in different columns for different date ranges there are large gaps in the generated list...
I am looking to count the unique amount of customers who are listed in column C based on the criteria that they purchased the product on the 1/08/2014 and that the product came from Department 3. The output I am looking for in this example would be 3. I can do it for this example but when I have 300 different customers it starts getting tricky and I'm a bit stumped on how to incorporate an array formula into a countifs() function or whether there is an alternative.
Date DepartmentCustomer
1/08/2014 3 A
1/08/2014 3 B
1/08/2014 2 C
1/08/2014 3 D
4/08/2014 3 A
5/08/2014 2 A
5/08/2014 3 D
Every other line is the planned production and the others are filled in after as the actual production
I have a sumproduct formula right now that looks if the line is considered planned production and then if there is a number greater than 0 planned on that day. The idea is to tell me the number of Stations scheduled to run that day.
Here is my problem- if a station is running two different products it gets counted twice.
I am trying to find a way that once a station is counted it only gets counted once even though they are on seperate lines.
Attached is an example of what I have with the formula and below that is what I am looking for
I'm trying to get a count of unique values in column B when criteria matches for columns A,C and D. The worksheet I'm trying to complete looks like this:
2366 2005 T [number of corresponding unique values of B]
For example:
--D---C---A-B
2366 2005 T 2
(as opposed to 3)
A
B
C D
T
655 2005 2366 T
656 2005 2366 T
656 2005 2366 W
659 2005 2367 W
659 2008 2369 W
659 2006 2370 F
659 2005 2370 W
660 2005 2370 W
660 2008 2371 W
660 2006 2371 T
660 2005 2371 W
661 2005 2372 W
661 2007 2372
I have this formula to give me the number of unique locations and it works fine for cell J1:
=SUM(IF(FREQUENCY(MATCH($B$3:$B$22,$B$3:$B$22,0),MATCH($B$3:$B$22,$B$3:$B$22,0))>0,1))
What I am trying to figure out is how to populate cells N4:N5 and N8:N9 for unique locations by Fruit & Vegtables by Area A and Area B. I just have some basic data for this example as the spreadsheets are 30,000+ lines long.
I have data in the following type
A Criteria B
A Criteria C Criteria A
C Criteria C
D Criteria 1
2 Criteria 3
Criteria 2
3 Criteria
I need a formula that will count the number of unique values in column A that have "Criteria" in column B. In this case the desired output would be 5 (A, C, D, 2, and 3), a blank cell in column A does not need to be counted.
I have two ranges of data and want to count the unique number of times the values in column A occur if they have two values in column B. For Example:
ColA ColB
333310143333306344441014444430635555161246666101466661612466663063
I want to count the number of times value in ColA has the value 1014 AND 3063. My intention is to create a table that cross references the two
10143063161241014331306333116124112
I searched and found answers where multi criteria were in multi columns but I can't seem to find a solution to this means of find the unique count in ColA.
Unique Count situation based on multiple criteria
Scenario: we have agents from different departments who produce different sales on different plan rates
Raw Data
Employee
Plan Rate
Payout pts
[Code]....
Is it possible to count unique values in one column based on that column and another column? I have a report that has a column of dates (B:B), column of month and year (C:C), and a column of RMA numbers(A:A). The RMA numbers repeat if there is more than one part on the RMA. I would like to count the number of RMA created each month. Below should be Jan = 2; Feb = 2; Mar = 1............
I have a CSE formula that allows me to count based on two criteria but it does not count unique values and you have to specify the two criteria.
As the title says, I need to count the number of unique records (names) in column A, where column L is = to something specific (X,Y,Z,W, whatever) for some statistics im trying to report.
Please see the attached spreadsheet. For role X statistics, I need a count of the unique names from col A, where col L = X. Based on my sample spreadsheet, the number should be 2. For Role Y, it should be 3.
There is the potential for spaces in the rows, and no one will be 'cross role'
I've got a few different methods to just count unique values with specific criteria in the same column, but I just can't make anything work for specific criteria in another column.
I have a problem which is beyond my capabilities. I need excel to sum amount column (See example table below) by unique values in company column then conditionally sum those values based on the year of investment, stage of company and finally, the kicker, the summed Amount by unique companies value has to be less than a certain threshold.
For example, I want companies in Stage Column of Exit only and in year 2004 only BUT only if the sum of the Amounts by unique company values is less than 100. So in the example table this would return 0. I have code and criteria written to sum unique values based on similar criteria such as sum if company Stage is Seed and Year is 2004 but for the life of me I can't seem to make the jump further.
For Unique values I used this function:
=SUMPRODUCT(($B$2:$B2=Year04)*($D$2:$D2=StageS)*($A$2:$A2=$A2))=1
Then:
=DCOUNTA($A$1:$D9999,2, Criteria)
or
=DSUM($A$1:$D9999,2, Criteria)
This along with criteria explained before returns the number of unique companies that are Stage=Seed and Year=2004 or sum of amounts with that criteria.
I am trying to adapt this technique to get what I want but to this point have been unsuccessful. My best guess is that I will need to create an array of the unique companies (New Sheet column A) with the Summed Amounts (New sheet column B) and then run functions again with the easier equations and criteria? I am trying to avoid combining company records as each investment needs to remain individual and there are 16000 records. Any help would be greatly appreciated.
Company Year Amount Stage XYZ 2004 10 Seed XYZ 2004 20 Seed ABC 2004 5 Early ABC 2004 25 Early DEV 2004 14 Later DEV 2004 19 Later TRU 2004 100 Exit TRU 2004 120 Exit TRU 2004 100 Exit
I'm facing a big problem and I can't found a solution for days.
I'm trying to count/sum unique values in a Range, base on a criteria excluding Blank cells. Basicly I'm using the Formula Below:
=SUMPRODUCT((C2:C20"")/COUNTIF(C2:C20,C2:C20&""))
Let me Put to you an example for you been able to understand my problem.
Example considering Range "C2:C20" exluding blank cells
(1) - To count unique values
=SUMPRODUCT((C2:C20"")/COUNTIF(C2:C20,C2:C20&""))
(2) - To count unique values based on criteria in range "B2:B20"
=SUMPRODUCT((C2:C20"")/COUNTIF(C2:C20,C2:C20&"")*(B2:B20="E"))
(3) - To sum unique values on "E2:E20" based on same criteria
=SUMPRODUCT((C2:C20"")/COUNTIF(C2:C20,C2:C20&"")*(B2:B20="E")*(E2:E20))
They all work fine. But I need to insert a merge at Row 10 for
better reading purposes and the (2) and (3) are returning (#DIV/0). The (1) formula still work's.
I just don't know what to do guys ....
I'm trying to get a count of unique values in column B when criteria matches for columns A,C and D. The worksheet I'm trying to complete looks like this:
2366 2005 T [number of corresponding unique values of B]
For example:
--D---C---A-B
2366 2005 T 2
(as opposed to 3)
A
B
C D
T
655 2005 2366 T
656 2005 2366 T
656 2005 2366 W
659 2005 2367 W
659 2008 2369 W
659 2006 2370 F
659 2005 2370 W
660 2005 2370 W
660 2008 2371 W
660 2006 2371 T
660 2005 2371 W
661 2005 2372 W
661 2007 2372
A B C D
1 Yes Red Green
2 Yes Blue Black
1 No Blue Black
2 No Blue Green
2 Yes Red Black
I am interested in finding the number of unique entries under column A where column B = Yes; Column C = Red OR Column D = Black (answer is 2)
I have a list, 50000 rows long with phone numbers and the service provider it belongs to. I want to extract some of this information. I'm looking for a formula which can give me the following: How many unique phone numbers is there in column B from service provider number 4 and 5? The following pic is just an example of how the list is compiled. How can I get sum up only the numbers from 4 and 5 and not the whole bunch? If I use this formula
Try this formula. Array formulas will have curly brackets {} emcompassing the ENTIRE formula. You do not add these, you Enter the formula with Ctrl+Shift+Enter and Excel will add them (details: Array formulas). Many more Excel Formulas
=SUM(N(FREQUENCY(D1:D51112,D1:D51112)>0)). I sum up all the unique phone numbers, but I don't know how to set a "if service provider is 4 or 5" if you get what I mean. This was the first part. The second part is finding out how many times each unique number from service provider 4 and 5 is listed.