Vlookup VBA To Lookup Number And Display Name And Picture In Userform
Mar 1, 2014
This workbook UserForm Lookup Picks - Mar 01 2014.xlsm is working with :
HTML Code: [URL] ....
Now I have a need to lookup the name and picture based on only a player number in column A. It works if there is a letter preceding the number, but not if it is just a number.
I have below code for dısplaying ımages on userform and ıt Works fıne how ever ı have more then 1 Picture to show so how can ı unload the pıcture and Show the second one and so on
I have done the above where when I select a picture name from a drop down list it displays the relevant picture in another cell by using the IF function in the named formula
My question is why cant I use VLOOKUP instead of IF in the named formula. When I use it it comes with an error.
I have a number of pictures on sheet 1 that display names from cells in sheet 2
E.g. Cell B1 in Sheet 2 has the value "Bob Jones" Cell B2 in Sheet 2 has the value "Ian Jones"
In sheet 1 Picture1 has the formula =Sheet2!$B$1 so that the picture displays "Bob Jones" Picture2 has the formula =Sheet2!$B$2 so that the picture displays "Ian Jones"
I have about 30 pictures displaying names in this way, but I want the name of the chosen picture to also appear in cell A1.
E.g. On sheet 1 user clicks on Picture 1 (Bob Jones), the name "Bob Jones" appeas in Cell A1 User clicks on Picture 2 (Ian Jones), the name "Ian Jones" appeas in Cell A1
Is It Possible To Embed Pictures So That When I Do Lookup A Code It Then Shows Me The Picture Of What It Is Im Looking For. Ie If I Was To Type In Kettle It Would Show Me A Picture Of A Kettle In The Next Cell?
I have a picture on sheet 2. When I enter the text "htfo" without the quotes into cells a1 on sheet 1 , i would like the picture to be displayed for 5 seconds and then exit the picture and return me to sheet 1.
Basically, I want cell A1 to display the message "Macros must be enabled for this document to display properly", then have that text replaced with a picture (jpeg logo) if macros are enabled. I know I need to put the code in the Workbook_Open sub, but I keep getting the "error 1004, cannot modify visible property of picture object" when I try to tinker with "visible = true".
*EDIT* - The picture must be embedded in the spreadsheet somehow, and hidden from view when macros are disabled. (Having the picture crammed into a single cell at IV65536 is fine.)
I insert a picture in the merged cell(2 lines) of QTablewidget,but the pictures can only display height of one line and becomes very narrow.How to solve it? I write the code in QT with C#.
Using VBA I have used "LoadPicture" to load a picture to a picture frame on my userform. The actual file name is driven from a label. I now want to unload it so the value is None.
is it possible to have an image control in a userform to reference a picture inserted on a worksheet?
i have a number of pictures i want to load depending on certain events that happen in my sheet. i would like to be able to have this on multiple computers, and i would prefer to not to have to copy over the workbook AND a picture folder. i would like this to be as self contained as possible.
Is there any way to have a picture pop up when a label or textbox is clicked in a userform? I need the userform to stay open and usable while the picture is open. Basically the picture is supposed to assist the user of how to fill out the section.
open the attachment & click the button. I'd like you to please help me in reducing both the height & width of the picture. So that when the button is clicked the pic. overall size will appear smaller.
I have a userform which takes a large amount of sequential geographical data and builds a theoretical model of my layout whithin excel. However I would now like to incorperate an interactive aspect to this userform. I have written code which draws a line diagram whithin a seperate CAD app and imports it as a picture to the excel userform each time the user updates the data, but I would like to be able to select different areas whithin the data by clicking in the appropriate place on the picture in the form. I know this kind of interactivity is a bit beyond visual basics line of duty but my model MUST stay whithin the confines of excel thereforwe my front end must remain VBA for the time being.
My other option is to build up a diagram out of smaller components (boxes etc) whithin the userform. This would be entirely acceptable, however I'm not too sure if its possible to 'create' new pictures on the form from whithin the code.
Excel offers many ways to use a key to lookup a value (VLookup, Index/Match, DGet, and the rest). What's the fastest way to perform a lookup of a small table of, say, 30 rows of key-value pairs? Theoretically, it would be most efficient to use a branch table (also known as a jump table). See the wikipedia article for branch tables: http://en.wikipedia.org/wiki/Branch_table. Does Excel/VBA have a way to create a branch table for such lookups?
Is it possible to load an image into a label and have the caption for the label be visible too? I've only been successful having one or the other display but not both.
I've got a table in a worksheet. Every time the user double-clicks on one of the cells containing the names for each of the listed items, a userform pops up displaying information about that item. Besides other controls, this userform has an Image Box, that displays a picture of the item, and a Multipage.
What I want to do is to display the same picture shown by the Image Box, on to the Multipage, using the same file, but, and here's the quirk, aditionally, change it's size, turn it monochrome, and set its transparency to a different value.
I've attached an example of the final look I'm seeking. This was done by prior editing of a copy of the image and inserting it using LoadPicture, but this solution is too troublesome as this is done solely for aesthetical purposes, thus not justifying all the hassle a user has to go through everytime he wishes to add a new item to the table.
I'm trying to create a completion statement on where I will add up the money my client has sent to me and also add up the money I need to pay out in order for them to complete their transaction. The end result I want is I would like to display whether my client has given me to much money and I need to repay them. Or if they haven't given me enough then I need to invoice them. I need excel to display for me after all the figures have been added and subtracted if the end figure is negative then display in D19 (balanced owed to you). If the end figure is positive (Balance required from you) display in D20.
How can i paste a picture from a workbook to my userform image control? Without having to create loads of code for this to be done? Ive tried something like this
[Code] .....
And cant get anywhere near doing what i want it to do.
I have an image box on a userform in Excel VB. Is there ANY WAY to load an image into this image box from an object that I have loaded into an excel worksheet something like
If userform1.checkbox1=True Then userform1.image.picture = loadpicture (Worksheets("Sheet1").shapes("Object 1")) ElseIf userform1.checkbox2=True Then userform1.image.picture = loadpicture (Worksheets("Sheet1").shapes("Object 2")) Else msgbox "No image" Endif
I have a large excel workbook that is full of data about certain parts. I am able to enter a number and populate the sub item using VLookup but I would like to populate a picture based on the sub item. The pictures are located in there own folder inside the folder where this excel file is located.
I have an Invoice setup for a Car Servicing Garage in excel. It does a few things:
1) On saving the workbook it will take a jpeg screenshot of the worksheet and save it locally
2) The name of the created jpeg file is taken from cell B9
Cell B9 contains the vehicle registration number. So, obviously my problem is that if a the same car comes in on more than one occasion (which happens frequently), the original jpeg will be replaced as the file name is not appended. This will mess up the invoice records. So what I would like is for it to acknowledge that a jpeg file with that name already exists and to just append a "_1", "_2", "_3" etc on the end of the original jpeg file name for the new jpeg file name. I have attached the my excel file so ideally, if someone could insert the necessary code or PM me that would be great.