Hide Picture By Default, Display If Macros Enabled
Apr 7, 2008
Basically, I want cell A1 to display the message "Macros must be enabled for this document to display properly", then have that text replaced with a picture (jpeg logo) if macros are enabled. I know I need to put the code in the Workbook_Open sub, but I keep getting the "error 1004, cannot modify visible property of picture object" when I try to tinker with "visible = true".
*EDIT* - The picture must be embedded in the spreadsheet somehow, and hidden from view when macros are disabled. (Having the picture crammed into a single cell at IV65536 is fine.)
Thoughts?
View 10 Replies
ADVERTISEMENT
Jul 8, 2006
How can I determine if the user selected "disable" at the initial macro prompt screen.
Basically, I would like a formula/function that can say whether Macros are switched on or off by the user.
View 9 Replies
View Related
Oct 27, 2010
I have an excel file saved as macro-enabled that is perfectly functional and can be opened on my computer (via Security Warning - Enable Macros). The file is saved on another computer, through which I am accessing by a network.
This other computer is unable to run the macros, and when we open the file in excel there is no security warning that pops up (like there is on my computer). I have gone to the Excel Options and entered the trust center settings, and finally the Macro Settings. It is set at Disable all macros with notification. (same for both computers... but on one of the computers there is no security warning that pops up)
We tried enabling all macros (temporarily) and tried re-opening the file and running a macro. We got an error message saying that macros were not enabled.
We also made the file a trusted location and saw no changes.
View 7 Replies
View Related
Sep 8, 2012
I want to use data validation so that if macros are not enabled, data validation in a particular cell will not allow any entry. Maybe a helper cell that is TRUE if macros have been enabled? How is this done?
View 2 Replies
View Related
Feb 4, 2014
I would like to be able to password protect each sheet in a workbook and still be able to use the macros/form control (button). Below is the code that I'm using and the code that I've attempted to add to it to protect it.
Current Code:
[Code] ....
Code added for protection but not working:
[Code] ....
I've added this code to both the beginning and the end of my code; however, I'm getting a "400" error when I try to use the form control (button) when the sheet is protected. Is there something that I'm doing incorrectly?
View 6 Replies
View Related
Mar 29, 2009
I have created an Excel Workbook and this Workbook has a VBA code that enforces an expiry date of the workbook (TimeBomb from cpearson.com). So, if the expiry date has passed, the workbook will not open. But since it is VBA related, the expiry date will work only if one has enabled macros. If macros are disabled, the workbook will open regardless of the date.
So, is there a way for Excel to check if macros are enabled? and is there a way for Excel not to open the workbook, if the macros are disabled?
View 10 Replies
View Related
Oct 28, 2013
I'm posting a workbook on our network that I want to enable users to go in and update. I have the workbook designed, with entry fields for the data they need to enter, and they then push "Submit" to submit the new data to a hidden tracking log within the workbook.
Many of the users will be complete Excel newbies, and although I haven't posted the workbook yet, I am trying to anticipate possible issues. The first that comes to mind is that the user opening the workbook may not have macros enabled in their version of Excel, and they will get a message, and can't perform the udpate. Is there a way to add a Workbook Open event that automatically enable macros in the workbook when they open it, even if it is for this workbook only?
View 5 Replies
View Related
Jun 10, 2008
I'm making a little calculator thing for some of my colleagues, and I've created a warning sheet at the front in case their macro security is set to high or they disable macros.
The thing is, when the workbook is opened with macros enabled, and when it's closed, this warning sheet flashes briefly. Is there any way to avoid this?
My code is:
Private Sub Workbook_Open()
Worksheets("Form").Visible = True
Worksheets("Form").Activate
Worksheets("Enable macros").Visible = False
UserForm1.Show
End Sub
Private Sub Workbook_BeforeClose(Cancel As Boolean)
Application.ScreenUpdating = False
Worksheets("Enable Macros").Visible = True
Worksheets("Form").Visible = False
Me.Save
Application.ScreenUpdating = True
End Sub
View 9 Replies
View Related
Oct 23, 2006
I prtected several sheets with the xlVeryHidden command I got from you. But when the user does not allow Macros to be executed, also these protections are not executed. Does there exist any solution to this problem? Something like "when macros are not allowed do NOT open file"?
Sub workbook_open()
Application.DisplayAlerts = False
Application. ScreenUpdating = False
Application.AskToUpdateLinks = False
Windows("rechenfile.xls").Activate
Sheets("Daten").Visible = xlVeryHidden
Sheets("Koeffizient").Visible = xlVeryHidden
Sheets("Investitionen").Visible = xlVeryHidden
Sheets("Konsum").Visible = xlVeryHidden
Sheets("Zinssatz_permanent").Visible = xlVeryHidden
Sheets("Preise").Visible = xlVeryHidden
Sheets("Nettotransfers").Visible = xlVeryHidden
Sheets("Beschäftigung").Visible = xlVeryHidden
Sheets("Löhne").Visible = xlVeryHidden
Sheets("Nettoexporte").Visible = xlVeryHidden
End Sub
View 4 Replies
View Related
Jan 30, 2008
I have been working on an excel spreadsheet and have come acrss this problem once before too. When I try to open this file it hangs and does not respond. the file size is not too big (490KB). When I disable macros i can open the same file but when the macro are enabled, it hangs. have been trying to look for a solution but just dont know what to do.
View 3 Replies
View Related
Apr 14, 2008
I have excel 2007 and I want to record a macro. I have enabled all macros via the Trust Center settings and have even saved the current workbook (created from scratch in 2007) to a macro-enabled version.
But when I click on the 'developer' toolbar, 'record macro' is grayed out.
View 9 Replies
View Related
Aug 17, 2006
When you enable macros the sheets 2, 3, 4 ect are visible but if you disable macros, you only see sheet 1 and and you can place a message on the sheet saying this will only work with macros enabled.
View 2 Replies
View Related
Jun 18, 2014
I have done the above where when I select a picture name from a drop down list it displays the relevant picture in another cell by using the IF function in the named formula
My question is why cant I use VLOOKUP instead of IF in the named formula. When I use it it comes with an error.
View 6 Replies
View Related
Jun 26, 2006
I would like to hide the standard and formatting toolbars in excel when i enable workbook protection, however I have no idea how to get excel to realise when workbook protection has been enabled, and how to hide the toolbars in VBA also. Also i would like to know how to do the reverse (how to show tooldbars when workbook protection has been disabled)
View 3 Replies
View Related
Aug 16, 2008
When I open up a new workbook it automatically contains 3 macros that I mistakenly added when I was experimenting a few months ago. How can I remove these macros from the default new workbook?
View 3 Replies
View Related
Jun 28, 2012
My objective is to change a picture in a cell depending on the previous cell for example
If the number at B1 is bigger than A1, a mouse(example only) must appear below. If B1
View 7 Replies
View Related
Jan 14, 2010
I have a command button that is within a cell that when selected it insert a picture, the problem I have is when picture is in selected cell (same as command button) I can still view the command button from behind. I set the picture to “view from front” and Command button to “view from rear” but it doesn’t solve anything. I also have the command button checked to not print
View 14 Replies
View Related
Feb 10, 2014
I have a number of pictures on sheet 1 that display names from cells in sheet 2
E.g.
Cell B1 in Sheet 2 has the value "Bob Jones"
Cell B2 in Sheet 2 has the value "Ian Jones"
In sheet 1 Picture1 has the formula =Sheet2!$B$1 so that the picture displays "Bob Jones"
Picture2 has the formula =Sheet2!$B$2 so that the picture displays "Ian Jones"
I have about 30 pictures displaying names in this way, but I want the name of the chosen picture to also appear in cell A1.
E.g. On sheet 1 user clicks on Picture 1 (Bob Jones), the name "Bob Jones" appeas in Cell A1
User clicks on Picture 2 (Ian Jones), the name "Ian Jones" appeas in Cell A1
View 1 Replies
View Related
Dec 19, 2013
I have below code for dısplaying ımages on userform and ıt Works fıne how ever ı have more then 1 Picture to show so how can ı unload the pıcture and Show the second one and so on
[Code] .....
End sub
View 6 Replies
View Related
May 30, 2014
I made a triangle with the excel forms and I want that it's shown when the value in A1=1 and hidden if value in A1 is NOT 1.
Alternatively: Make the line colour white or something like that. I just don't want to see it anymore
Is that possible without VBA? Or if not, how would I do that?
View 1 Replies
View Related
Dec 9, 2011
I got a database that include a link for pictures stored in my drive.
I would like, to scroll trough the database entry and have the pictures resisze and displayed in a define region of my sheet.
How do I display a picture from a link?
How do I re-size so it fit in the region?
Working with Database
I'm using Excel 2007. I don't see anymore the form creation tool that I have used many many years ago.
View 2 Replies
View Related
Feb 28, 2008
Is It Possible To Embed Pictures So That When I Do Lookup A Code It Then Shows Me The Picture Of What It Is Im Looking For. Ie If I Was To Type In Kettle It Would Show Me A Picture Of A Kettle In The Next Cell?
View 3 Replies
View Related
Nov 19, 2009
Three columns.
A - Date last checked
B - Due Date
C - Actual Date checked
Currently column B is formatted to Date and simply has =A+84 and will display a date 3 months in future. However if there is no date in column A, then column B displays a default 1900 date.. Is there a way of making this blank if there is no date in col A?
View 5 Replies
View Related
Jun 28, 2014
I have a picture on sheet 2. When I enter the text "htfo" without the quotes into cells a1 on sheet 1 , i would like the picture to be displayed for 5 seconds and then exit the picture and return me to sheet 1.
View 2 Replies
View Related
Mar 1, 2014
This workbook UserForm Lookup Picks - Mar 01 2014.xlsm is working with :
HTML Code:Â [URL] ....
Now I have a need to lookup the name and picture based on only a player number in column A. It works if there is a letter preceding the number, but not if it is just a number.
View 8 Replies
View Related
Mar 5, 2014
I insert a picture in the merged cell(2 lines) of QTablewidget,but the pictures can only display height of one line and becomes very narrow.How to solve it? I write the code in QT with C#.
my code：
tableWidget1->setItem(3,3,newQTableWidgetItem(QIcon("image2/vm.png"),tr("Ab")));
tableWidget1->resizeColumnToContents(3);
tableWidget1->resizeRowToContents(3);
View 1 Replies
View Related
Aug 1, 2009
Ive opened some files here in this forum that when you just click a button, macros will run. But when you view the macros, there's none. How can i do this? Some kind of an executable one. I have like 8 macros.
View 4 Replies
View Related
Jan 23, 2009
I have recorded 2 macros which helps me protect my sheet as intended. when the user runs the macro, and clicks on cancle then debug, it reveals the password entered for the macro.
Would really appreciate if some one helps me in modifying the below macros to hide password from others.
View 9 Replies
View Related
Jan 30, 2009
I have created some macros and assigned shortcut keys. The workbook is shared by other users. I want to keep these macros from being accessible to other users. I know that they can go to ToolsMacros and display the names of macros and run them. How can I prevent them from accessing the ToolsMacros? Or can I assign password to individual macros?
If I put the macros in individual sheets as Private, they don't show up on the ToolsMacros list, but then I can't assign shortcut keys.
View 11 Replies
View Related
Jan 16, 2010
1) Force user to enable macros.
2) keep three worksheets very hidden all the time.
3) passwrd protect vba
I have been using this code to force user to enable macros but this unhides all sheets other than "macros not enabled" sheet. I need three worksheets to remain very hidden all the time. How do I do this.
Option Explicit
Dim ws As Worksheet
Private Sub Workbook_BeforeClose(Cancel As Boolean)
Worksheets("Macros Not Enabled").Visible = True
For Each ws In Worksheets
If ws.Name "Macros Not Enabled" Then ws.Visible = xlVeryHidden
Next
End Sub
Private Sub Workbook_Open()
For Each ws In Worksheets
If ws.Name "Macros Not Enabled" Then ws.Visible = True
Next
Worksheets("Macros Not Enabled").Visible = xlVeryHidden
End Sub
View 9 Replies
View Related
