What Does Percentage Represent When Dimensioning Variable

Mar 6, 2014

I found the code snippet and I cant remember what it "means".

View 4 Replies


ADVERTISEMENT

Run-Time Dimensioning Of Arrays

May 6, 2008

I'm trying to create an array of strings and I thought I was doing it correct via :

:
Dim strProjects() As String
Dim count As Integer
count = 1
For x = ActiveSheet. Range("C65536").End(xlUp).Row To 3 Step -1
If CDate(ActiveSheet.Range("H" & x).Value) = Date And Cells(x, 3) = "1" Then
strProjects(count) = Cells(x, "E") ' error happens at this line?
count = 1 + count
End If
Next x

The error says the cursor cannot be identified, or Run time error 9?

View 9 Replies View Related

Formula To Represent Trendline And R2 Value

Dec 29, 2013

I have created a scatterplot with a trendline and I need a formula to represent the trendline so it can be applied to separate results. How I can create a formula and an R2 value?

View 1 Replies View Related

Bar Graph - Represent Sum Of Two Columns In One Bar

May 7, 2012

I have multiple columns with data and I want to represent them in a bar graph. The problem is that for some of them I want to represent the sum something like:

Columns A and B sum and represent (I don't want to make another column, C, with the sum, the sum of the two columns should be done by the graph).

View 1 Replies View Related

How To Represent Numeric Wildcard

Aug 21, 2009

In column A I have a sentence.

I would like column B to return TRUE if the sentence in column A contains any of the string below:

AAA¤
BBB¤
CCC¤
DDD¤
EEE¤
FFF¤
GGG¤
HHH¤
III¤
JJJ¤

Where ¤ is any number from 1 to 9.

Is there a formula to do this, preferably without having to list all the possible combination of the list e.g. AAA1, AAA2, AAA3, and so on?

View 9 Replies View Related

Letters To Represent Numbers

Jun 30, 2008

how to make letter represent numbers what i am trying to do. i am trying to put a sheet together to make my life easyer. i am a lectuer and need to keep trake of studes progress how this is done is that over the year they are graded my Pass Merit Distinction in using offic 2007 (Excel)and i was to make it so that if i put in a P it will =6 points ,M=12 points and D=18 points and for the total points to for each student to come up on the side after the units if there a rule for this and how would i put the rule into the sheet ?

View 3 Replies View Related

Conditional Sum. Values Represent Numbers

Oct 8, 2007

The following percentages equal these numbers:

100% = 5
93-99% = 3
80-92% = 1
<80% = 0
From F5 to AR5 percentages scores will be inserted for each row.

So percentages scores for the first three entries (F5-H5) should yield the following result:

100% + 95% + 85% = 5 + 3 + 1 = 9

View 3 Replies View Related

Graph / Chart Represent Whether Or Not Cell Has Been Filled

May 14, 2014

I am making a spreadsheet that will be used to track employee time usage. I would like to be able to create a graph of the time throughout the day that shows only whether or not the employee has entered an activity during each particular time slot.

EX: The graph shows the time from 8-10am in 30 minute increments. The employee has entered activities for the time slots from 8-9 and 9:30-10. When the graph is created, I would like to see times 8-9 and 9:30-10 filled (or, charted, or, however I should phrase it) and time 9-9:30 left blank (to represent that no work was done).

View 3 Replies View Related

Represent Number Of Days Into A Scale For Statistics

Sep 30, 2008

I have a scenario where by Column A is date incident opened and Colum B is date incident closed.

And Column C shows the days between them. I got this and its fine. However, how do i
make a table or in any how define it as if the number is 1 - 3 days then it should be A

1-3 days = A
4-6 days = B
7-8 days = C
9 days onwards = D

This is because i need to make a chart and graph of the turn around time and the best is to define into a character alphabet so the chart will show the statistics of how many A, B, C and D But how do i do that.

View 9 Replies View Related

Sums- 52 Tables In One Spreadsheet To Represent 52 Weeks

Feb 4, 2009

I have 52 tables in one spreadsheet to represent 52 weeks and have created another table to sum the weekly data but the sum function doesn't do it because of the amount of cells which need adding.

example: c3, c14, c24, c34, c44, c54 etc...

View 9 Replies View Related

Five Digit Numbers That Represent A Persons Code

Dec 1, 2009

In one column (f5:F100) I have five digit numbers that represent a persons code. I have five groups of codes, they are 10000-15000, 16000-19000, 20000-25000, 26000-29000, and 30000-40000. In another column (Column H) I have an "X" saying the are qualified in something.

I am looking for how to write a statement that says answers this question:

How many people are qualified in the codes between 10000-15000.

Ultimately I am going to take this number and divide it by the total number of people in the group to get a percetage of qualified people in the group.

View 9 Replies View Related

Find Maximum. Some Values Are Represent By Text

Aug 8, 2007

I have a column of values the values can be "T", 0.00 ->any number to the nearest hundredth. I thought I had this problems solved a while back but after having time to do some quality control I found that anytime there is a value of "T" the macro does not work. I have had some great help with this in the past to get as far as I have but I still cannot seems to get it 100%. I have attached a sample file. The result that I would like to see is in the cell BH145 is "16,17,23" without the quotes of course.

When you open the worksheet you will see that the values of concern are precipitation values. These values are rounded to nearest hundredth. When there is a trace of precip however it is recorded as "T" therein lies the problem that I cannot seem to solve.

View 8 Replies View Related

Creating Chart To Represent Results On ANOVA Analysis

Oct 12, 2012

I am doing an ANOVA analysis of survey results for a set of products, and would like to present a chart to graphically represent the results.

View 1 Replies View Related

Learn Music Scales And Intervals By Using Numbers And Letters To Represent Notes?

Mar 13, 2014

IF key of C has notes CDEFGABCDEFGABC progression, then notes

1-2-3-4 : 2-3-4-5 : 3-4-5-6 will result in C D E F D E F G E F G A respectively

I want to create note patterns regardless of scale type: Major, minor, modal etc in each of 12 keys. Music software exists but simple EXCEL formulas should be available or easily created.

View 2 Replies View Related

Return Value Of Date Using Addition From 2 Columns That Represent Date And Number

Feb 21, 2014

I want to get a return value of date in column C whereas column A represent a date and column B represent a number. Simplest formula in excel is Column C (Feb 26, 2014)= Column A (Feb 21, 2014) + Column B (5). I want it to have in macro code.

View 14 Replies View Related

Conditional Formatting Based On Percentage And Insert Cell Based On Percentage

Apr 3, 2013

I have a workbook that I've built for a project. I've attached a sample workbook. What I'm trying to do, for the entire sheet or workbook if possible, is turn any Cell with a percentage of 30% to 49% yellow and any cell with a percentage of 50% or more Red. I would also like to move the ID's of the variable cells, for example Id number 9922, to the cells beside the description of the rows, Affected would be an example, if the information contained in the same row as the ID meets with a set of variables.

For example I only want the ID's moved if they correspond with IDsub 1-25. One more thing, the people who will be using this spreadsheet will be copying data from a website when it is imported it does not insert the values as numbers. I would like to format the cells, in example workbook they would be any of the cells labeled ID IDsub Variable or Number, so that anything put in that cell will automatically be converted to a number.

I should also probably add that the formatting will be done on approximately 80 rows a sheet with 47 sheets.

View 2 Replies View Related

Calculate Percentage Of A Percentage?

Apr 26, 2013

calculating the percentage of a percentage and writing the formula for excel.

There are 295 people in a room, of the 295, 75 or 25% are mothers. (I know how to calculate 25% - 75/295 = 25.42) of the 75 mothers 35 have 3 children, 32 have 2 children and 10 have 1 child.

35 is what percent of 25%
32 is what percent of 25%
10 is what percent of 25%

View 3 Replies View Related

Set Variable: Object Variable Or With Block Variable Not Set

Jun 4, 2007

I have the following code (just pasting the relevant section) which crashes when it reaches the highlighted line of code. and a dialog box pops up with the text: "Object variable or With block variable not set"

Sub test()
Dim StartRng As Range
Dim Buffer As Range

Set StartRng = WorkSheets("Sheet1"),Cells(1,1)

StartRng.Activate
ActiveCell. CurrentRegion.Select

Buffer = rngStart.CurrentRegion.Copy

' I also tried the following line of code but that didn't work either
'Set Buffer = rngStart.CurrentRegion.Copy
..
...
End Sub

View 9 Replies View Related

Insert A Variable Number Of Rows And Copy And Paste From And To Variable Positions

Aug 8, 2009

On the attached Excel file, I have code that will insert a variable number of rows and copy and paste from and to variable positions. That all works fine when run from a command button, but when I try to run it from the Worksheet_Calculate by entering 1 in J1 or K1 (inrange cell is J1+K1 for testing purposes) the CommandButton1_Click sub runs continously until an error occurs.

View 4 Replies View Related

2007 Macro: Run-time Error 91:Object Variable Or With Block Variable Not Set

Feb 20, 2009

I'm fairly new to macro's and VBA, by searching on the internet i've copied and pasted some code together into a macro.
But it ends in a Run-time error 91...

The macro opens a target .xls file in a selected folder, performs copy - paste actions from masterfile to targetfile.
Than it filters data in the targetfile sheet1 and copy's the results to the various other sheets; saves and closes the targetfile.
The next target file in the folder is opened and the actions are repeated in this second target file.
For the first target file this works smoothly; but for the second one (of a total of around 100) it does not copy the filter results to the other sheets in this workbook.
The error message i get is: "Run-time error 91:Object variable or with block variable not set."
When i hit debug it highlights the line "ActiveSheet.Next.Select" which, at least in the first file, seems ok.

View 9 Replies View Related

Summing Variable Values Across Variable Sheets In Multiple Columns

Jun 27, 2014

I need a macro that will create a sheet at the end of the workbook.

Sum data from a variable amount of sheets and display that data on the created sheet.

Here is a step by step:

Starting on sheet 5.

Column D has a variable amount of part numbers in it. These part numbers would be different between the ascending sheets.

Column T, U, V has an inputed number in it that would need added up across all duplicate part numbers in all the sheets.

(Note: The data would also need started on row 4. Everything above row 4 is headers)

Here is a small example:

D E T U V
13019090W Part A1
68705500 Part B1
64202900 Part C-11
59634600 Part D1
26005300W Part E1

I need the macro to start with sheet #5(starting on row 4). Check to see if there is data in column T, U or V. If there is, to create a new sheet at the end. And copy the entire line into that sheet (starting on row 4).

After that, to check every sheet after (excluding the newly created one, starting on row 4) for data in Column T, U and V. And then check for duplicates in Column D on the newly created sheet. If there is a duplicate to add/subtract that number in Column T, U and V to the SUM in column T, U and V in the newly created sheet. If there is no duplicate, to copy the entire line to the new sheet.

So that when finished. On the new sheet, you have the SUM of T, U and V for everything that has data in T, U or V for all of the previous sheets, plus the entire line of the first instance (excluding the first 4 sheets).

View 2 Replies View Related

Inputbox Value Can Be Compared To A String Variable Or A Numeric Variable At The Same Time

Dec 7, 2008

I am trying to develope a "goto" page macro where the page value maybe 1,34,7A, 256C etc. I am not clear on how an inputbox value can be compared to a string variable or a numeric variable at the same time. This is what I have done, but when the texboxvalue is "7A" it doesn't work.

View 3 Replies View Related

Excel 2007 :: Object Variable Or With Block Variable Not Set Error

Feb 28, 2013

I Wrote a code which as intended to open each excel file in a folder and copy the data containing in it into a new sheet.

But While running the code the first excel file gets open, and an error message "Run Time Error 91-Object Variable Or With block Variable not set Error"

How to set the file which got opened from the folder to wbk variable.

Code:
Sub dataintoonesheet()

Dim i As Integer
Dim jk As Integer
Dim j As Integer

Dim rowstart As Integer
rowstart = 3

[Code] .......

View 9 Replies View Related

Macro Error Message (object Variable Or With Block Variable Not Set)

Jul 7, 2009

When i try to run the code below i get the error message - object variable or with block variable not set-

Sub REFRESHXX()

'LIST
Cells(Sheets("POINTS").Range("DD801").Value, Sheets("POINTS").Range("DD800").Value).Select
Selection.AutoFilter Field:=1, Criteria1:="1"
'SET RANGE
Dim sFormula1 As String
Dim sFormula2 As String
Dim sCell1 As String
Dim sCell2 As String
Dim sSheet1 As String
Dim sSheet2 As String
Dim r As Range
Dim MyRange As Range 'for testing

With Sheets("Points")
sFormula1 = .Range("CY1").Formula
sFormula2 = .Range("CY2").Formula
End With

'FORMULA IN R1C1 STYLE
strFormula = "=IF(ISNA(VLOOKUP(RC[-1],MASTER!R4C3:R17908C7,3,FALSE)),0,VLOOKUP(RC[-1],MASTER!R4C3:R17908C7,3,FALSE))"
'ENTER FORMULA IN ALL CELL RANGES
r.FormulaR1C1 = strFormula
'REDUCE TO VALUES
Dim ar As Range 'an area is a range
For Each ar In r.Areas 'areas are discrete, contiguous ranges of cells
ar.Value = ar.Value
Next ar

'UNLIST
Cells(Sheets("POINTS").Range("DD801").Value, Sheets("POINTS").Range("DD800").Value).Select
Selection.AutoFilter Field:=1

End Sub

View 9 Replies View Related

Find Method Code: Object Variable Or With Block Variable Not Set

Sep 8, 2006

I need my program to:
- find the cell containing the string "Datum/Tid"
- record the column and the row of the found cell in two variables lCol and lRow

Here is my

Sub test()

Dim rFoundCell As Range
Dim lRow As Long
Dim lCol As Long

'Find method of VBA
Set rFoundCell = Range("A1")
Set rFoundCell = Worksheets("Sheet1").Range("A1:Z50").Find(What:="Datum/Tid", After:=rFoundCell, _
LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, _
SearchDirection:=xlNext, MatchCase:=False)

'for anyof the two lines down I get the message "object variable OR block variable not set"

lRow = rFoundCell.Row
lCol = rFoundCell.Column

End Sub

View 5 Replies View Related

Find Dates Macro: Object Variable With Block Variable Not Set

Nov 21, 2006

I found this nice little bit of code for a date range search in column A but it will not work. Apparently i have not set a variable or something.


Private Sub Worksheet_SelectionChange(ByVal Target As Range)

Dim startDate As String
Dim stopDate As String
Dim startRow As Integer
Dim stopRow As Integer
startDate = InputBox("Enter the Start Date: (dd/mm/yyyy)")
If startDate = "" Then End
stopDate = InputBox("Enter the Stop Date: (dd/mm/yyyy)")
If stopDate = "" Then End
startDate = Format(startDate, "dd/mm/yyyy")
stopDate = Format(stopDate, "dd/mm/yyyy")
startRow = Worksheets("sheet1").Columns("A").Find(startDate, _
LookIn:=xlValues, lookat:=xlWhole).Row
stopRow = Worksheets("sheet1").Columns("A").Find(stopDate, _
LookIn:=xlValues, lookat:=xlWhole).Row
Worksheets("Sheet1").Range("A" & startRow & ":A" & stopRow).Select

End Sub

View 9 Replies View Related

Runtime Error 91 Object Variable Or With Block Variable Not Set

Mar 24, 2014

I am getting error in Set MyRange

[Code] .....

View 3 Replies View Related

Assigning A Variable And Pasting Variable To Last Unused Column

Nov 19, 2008

to assign a variable to equal a Constant variable, then I need to find the last unused row on the worksheet, then paste that variable down the column (1-12200 or so rows). I also need to assign Strings for the first two Rows in the target column.

View 14 Replies View Related

Object Variable Or With Block Variable Not Set Error With Macro

Mar 12, 2009

I attempted to modify "macro_1a1ay" to look into the "comments" sheet (column a) for a specific text string. If that text string is found, I have it delete the entire row, then re-sort the page and return to the calling page. It works well as long as it finds something. When it does not find the string (i.e. like now when the page is blank) it gives me the run-time error mentioned above.

View 7 Replies View Related

Run Time Error 91 Object Variable Or With Block Variable Not Set

Oct 7, 2009

I am having a lot of trouble finding out why I am getting error. I believe the error is because it can't find the number. In cells C115:C314 i have the numbers 1 to 200 in order. when someone types in 1 to 9 in the text box it works, but on 10 and over i get the error ???? here is the code I have

shCalculator.Range("C115:C314").Select
Selection.Find(what:=CInt(txtPackageID), After:=ActiveCell, LookIn:=xlValues, LookAt:= _
xlWhole, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False _
, SearchFormat:=False).Select
x = ActiveCell.Row
shCalculator.Range("ProposedMeter").Value = Cells(x, 7).Value
shCalculator.Range("Package").Value = Cells(x, 12).Value
shCalculator.Range("ProposedMeterAmount").Value = Cells(x, 30).Value
shCalculator.Range("Term").Value = Cells(x, 62).Value
shCalculator.Range("Discount").Value = Cells(x, 67).Value
shCalculator.Range("Equipment").Value = Cells(x, 72).Value

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved