Paste A Macro Into A Cell
Aug 9, 2007
I am trying to do a paste special of this code from Paul into a specific cell so that when the conditions are met the cell will update automatically. The code works great, I just have to manually run it.
I have tried to copy all of it as it stands here then use the paste special, paste only values; but it pastes the text in the cell and adjacent cells. I have done this before successfully with simple formulas, not actual code. The cell is clean where I want to paste this also, no strange formatting or anything like that.
I have this great code but can not use it….
Sub test()
If Range("B13") <= Date Then
Range("E13").Copy
Range("F13").PasteSpecial Paste:=xlValues
Application.CutCopyMode = False
End If
End Sub
View 14 Replies
ADVERTISEMENT
Jul 30, 2013
Is this possible using code: Copy Cell A1 and Paste in first empty Cell down Column D. This would be connected to a command button. Both Cell A1 and Column D are on the same spreadsheet.
View 3 Replies
View Related
Feb 6, 2014
I am trying to write a macro for CUT & PASTE from one column to another.
The data is always in cell 'I', and should be transfered to cell 'F' (CUT & PASTE).
However, not all the cells in column 'I' are populated, therefore it is required to skip the empty cells.
View 1 Replies
View Related
Dec 11, 2013
I have the following code, so far:
Code:
Sub CopyPasteValue()
Dim ARow
Dim AColumn
Dim BRow
Dim BColumn
Dim Value
AColumn = 1
[Code]....
What I want it to do is to start in cell B1 and look down until it finds a non-blank cell; copy the contents of that cell. I then need it to go to the same row Col A and go down from until it finds the first non-blank cell then paste into the corresponding cell in Col B. It should continue this way through the rest of the worksheet. There is no set pattern to say to go down 5 rows or such. Also the number of pastes in each step is variable from 1 to ??
In my worksheet, the first non-blank cell in Col B is cell B3 and the first non-blank cell in Col A is A7. The paste should occur in cells B7:B10 because the next non-blank cell in Col A is A11.
View 2 Replies
View Related
May 30, 2002
Is it possible to do a macro to copy a cell in excel and paste that cell in outlook and return to excel
View 9 Replies
View Related
Dec 13, 2013
I want to create a macro to paste some data into the next empty cell. Below is sort of what I need but this show it going to a particular cell, I need it to got to next open cell in the range from say BY3. So next macro run it would copy and paste the data from T3:T9 (always this range) to BZ3 then CA3, CB3 and so on.
[[Sub CopyData()]
'
' CopyData Macro
' Copy The Data To Build Graph
'
[Code]....
View 1 Replies
View Related
Mar 31, 2014
I use few cells with formula and I would need when I click on the cell to run a macro that would copy the selected cell and do a paste value.
View 2 Replies
View Related
May 20, 2014
I want to make macro that copies values in a1 to a100 to cell c10 everytime I click enter.(first enter a1 to c10,second enter a2 to c10 and so on to the end of the list).
View 8 Replies
View Related
Nov 27, 2008
I would like a macro that will select the 65536th row to be used to paste format from rows 2 to the last empty cell in column a.
View 5 Replies
View Related
Jul 10, 2009
I am trying to write a macro that is able to take a "Part ID" from a column on Sheet "Temp", search sheet "Parts" for that "Part ID" in Column A, copy the corresponding description (listed in next column B) and paste that description into a third sheet "Sheet1" Column D. I would then need to repeat for all lines in sheet "temp"
I could most likely use an IF statement to do the search, but I was hoping to use excel's search function to make it quicker as there are over 1000 parts. For example:
Dim partID = String
Selection.Find(What:= partID, After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False).Activate
What I am getting stuck on is once the search finds my text in Column A of Parts, how to copy the Description in Column B into Column D of "Sheet 1". A sample file is attached. The output in Column D of "Sheet 1" should say in this example:
Circle
Square
Circle
Rectangle
View 2 Replies
View Related
Aug 8, 2012
I have written the code below. And I found two problems:
1.The code stopped to work when I change from Paste to PasteSpecial.
Sub Copyfriction()
Dim DestWB As Workbook: Set DestWB = ActiveWorkbook
Dim DestWS As Worksheet: Set DestWS = ActiveSheet
Dim DestCLL As Range: Set DestCLL = ActiveCell
Dim UserChoice
UserChoice = Application.GetOpenFilename(FileFilter:="Text Files (*.xls),*.xls")
[Code] ........
2.As you see the right cell on the the destination sheet need to be selected. So Im planing to run the macro when double clicking the cell in question. I have tried the next
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
If Target.Address = "$A$6" Then
Copyfriction
Cancel = True
End If
End Sub
View 1 Replies
View Related
Jul 26, 2013
I want to find data from a certain point and paste this to a cell. My objective is to get all the data on too one row. This row is always 1 in col M called Run#. The find locations never change, just the data being copied always changes . Heres example,
In col K find FHBASC and look across to the right 3 cells in col N and copy.
Look in col M and find 1, paste above copied data into col GI.
Then move down rows to next FHBASC and repeat process until end of sheet.
If I can get a very basic simple macro to do this, then hopefully I can just re write to suit my other data.
View 9 Replies
View Related
Dec 18, 2013
- A database sheet called 'QAEQUIP' which contains information on the movements of pieces of equipment. This information in in order of Column A which is a movements reference number.
- A reporting sheet called 'Email sheet', which you put in a month and year and using macros it copy and pastes the relevant rows from the database and puts them in date order (e.g. put in October 2013 and it will show all of the equipment moves that happened in October 2013, and in date order).
What my end user would like, is to be able to add text to an extra column on the reporting page which gets fed into the database on the corresponding row. What would the best way to do this be? I was thinking VBA for each row (there aren't that many rows) that says if this cell is changed, copy and paste the cell into the corresponding row / column on 'QAEQUIP'.
View 4 Replies
View Related
Apr 17, 2014
I have a table like this:
1/2/14
2345
1/6/14
34665
1/7/14
5473457
For Column A-I would like to create a macro that will copy the info from cell A1 and paste in in A2. This will continue all the way to the last row containing info which will vary. So after the first copy/paste, it well go to A3 and copy paste onto A4, A5 will copy and paste onto A6 etc.
For Column B- The same only it will copy the contents of B2 and paste it on B1, B4 copy/paste to B3 all the way until the last row of data.
View 1 Replies
View Related
Sep 9, 2013
I have a list of asset data (columns A:Z and over 20,000 rows).
I want a macro to find the word TAG in column F then cut off the entire row for all that meet the criteria and paste in another sheet. So I can see both sheets.
View 1 Replies
View Related
May 19, 2014
What I have is a list of selected employees, with the site they work at next to them.
What I need is a macro which looks at the site they work at, references it with an address table in a separate worksheet and then pastes the site address along with the employee's name onto a thrid worksheet which will be used to print post labels.
>Look at which site the employee works at (Sheet 1, D:D)
>Find the address of said site (Sheet 3)
>Paste the relevant address along with the employees name (Sheet 1, B:B) into a separate worksheet.
This will be done weekly, and I need the macro to either only work on the latest's weeks table, or to just work with the current active selection. Any better way to layout my table.
View 12 Replies
View Related
Feb 21, 2014
I have this macro and at the present time, can only compare two worksheets. One of my worksheets contains column headers with data, the other worksheet just contains column headers. The macro will match the data against the column header and paste below. I'm doing it this way because I have several tables I export from a MySQL database, but some of them have more fields than others so I was trying to get all of the data to line up in under the correct column header from each table. I need editing the macro to allow for
1) More than one worksheet to be analyzed at a time
2) If the first request is not possible, I would like for the macro to paste results at the next empty cell. As of now, it will only copy one at a time (which requires me to house the data in another worksheet everytime I run the macro).
Below is the code:
Dim ws1 As Worksheet, ws2 As Worksheet
Dim HeaderCells As Range, Hdr As Range, hdrFIND As Range
Application.ScreenUpdating = False 'speed things up
Set ws1 = ThisWorkbook.Worksheets("HEADERS") 'Define name of worksheets
Set ws2 = ThisWorkbook.Worksheets("B")
[Code] .......
View 1 Replies
View Related
Feb 27, 2014
I'm trying to write a macro, and the first thing I need it to do is paste a value into the currently selected cell. This value, though, will usually be multiline. So when I try to do it now, it pastes into the selected cell and the cells below it (one for each line of the pasted value). When I'm pasting manually, I avoid this by pressing F2 to edit the cell first, and then pasting. But how can I do this using a macro? Is there a type of paste command that will insert the multiline value from the clipboard into the selected cell?
View 2 Replies
View Related
Aug 1, 2012
I am writing a macro that will allow me to copy all the data in a set range (A2 and below) after checking that B1 contains the text "Year_id".
Right now, I am able to copy all the information, and paste it onto "Sheet 4". I am unable to code for the part where the macro would check for the text. The code that I have (for copying-pasting the date) is below.
Any code that would check the information in B1 into this macro code below:
Code:
Sub Copy_Allinfo()
Dim Sht As Worksheet
Dim Rng As Range
For Each Sht In Sheets
If Sht.Name = "Sheet4" Then
[Code] ........
View 7 Replies
View Related
Mar 4, 2014
I need to repeat the following copy past macro the number of times equal to the value in column B and repeat the process for rows 3 through 27. It would end up being a loop with in a loop. The data in C3:H3 will be pasted onto the "Fixt#" sheet as many times as the value in column B3. The idea is to create an individual entry on the "Fixt#" sheet for each row on the "Totals" sheet.
Code:
Sub Create_Fixt_SheetI()
'
' Create_Fixt_Sheet Macro
'
'
Range("C3:H3").Select
Selection.Copy
Sheets("Fixt#").Select
ActiveSheet.Range("B" & Rows.Count).End(xlUp).Offset(1).Select
ActiveSheet.Paste
Application.CutCopyMode = False
End Sub
View 3 Replies
View Related
Sep 3, 2008
I was planning to do was have a macro where the document opened and the cell that information was pasted in was decided depending on which cell was selected when the macro was run.
This worked fine, but it does mean that it needs someone who can edit the VBscript every time there is a new starter or someone leaves so isn't really viable.
What I was wondering, is if it is possible for me to start a macro, which then drags in the information I need from a text file, does all the calculations and rearranging, and then brings up a prompt for the user to open the document they want to paste it in, click on the cell where the pasting will start, and then the macro continues from there?
To try to explain it in as clear a way as I can. Say we have three managers, Alan, Brenda and Charlie. In Alan's team there are 10 staff members. Aaron, Bill etc.etc. If we have just run the report for Aaron, the macro will run, automatically drag all the information in and rearrange it, then it will pause while the user opens up the "Alan" spreadsheet, they select the "Aaron" first cell, click OK or something, and then the macro continues on its happy way?
View 9 Replies
View Related
Jun 20, 2013
Trying to extract data from Column C which contains date and time and number
example :
column c cell contains
<html><b>04/12/13 00:44 - text:</b><br>Event xxxxxxxx, yyyyyyy assigned. <br>Reference ID associated with event. ID: 123456<br><br></html>
need to extract and paste in Cloumn D
04/12/13 00:44
and column E to contain
123456
note : <html><b>04/12/13 00:44 - ( <html><b> and event. ID: is constant in all my cells)
View 2 Replies
View Related
Jan 6, 2014
In Sheet1, column Y looks into Sheet2 and returns the status of that specific order - the result displayed in column Y will be either blank or a variety of text strings (eg. received, pending etc).
I need to make a macro that looks into all the cells of column Y in Sheet 1 and copy/pastes as value into that same cell only if the formula in that cell returns text string "Received". It should not affect the other cells where the formula is returning either blank or a different text string.
View 1 Replies
View Related
Aug 17, 2009
i have about 80 files that all have the same structure. I also have a general excel file that I need to fill with values from each of the 80 files. I'd like to use a macro that can be applied to each of the 80 files at a time (or at the same time, if that's possible) so I can copy the cells (only the text, not the formula) I need from each individual file to the general sheet.
e.g.,
each file is:
xyz 123
abc 456
ghi 956
I need to copy the "123" to a cell in the general sheet, "456" to a different cell in the general sheet and so on (to be able to choose which cell in the general sheet I am copying to).
View 12 Replies
View Related
Nov 5, 2013
Let's say sheet - "delivery" - has a row1 that includes all possible delivery days. So A1 is 1.9.2013, B1 is 15.9.2013, C1 is 1.10.2013 and so on.
I want to make a macro, that will gradually go through whole row 3 in sheet "delivery" and look for "A1" date in sheet "Orders". Sheet "orders" have for example in column B the date of delivery, and in column C product of the delivery.
I want the macro to find all deliveries with "A1" date, and paste all products that will be delivered on this day under cell A1 (sheet delivery). then move on to the cell B1 (sheet delivery) - find all orders in sheet orders, that will be delivered on B1 date, and list all products with this delivery date under cell B1 (sheet delivery).
Example:
Sheet order
A
B
C
Date of delivery
Product
1.9.2013
orange
[Code] ........
Unfortunately simple Pivot table is not able to do this simple list.
View 3 Replies
View Related
Jan 29, 2014
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
View 1 Replies
View Related
Oct 1, 2012
I have one workbook that needs two macros.
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet.
....is equal to "McCormick" copy row to "McCormick" spreadsheet.
and so on.
View 2 Replies
View Related
Apr 26, 2013
I would Need a macro which would Search a Keyword in the excel sheet and copies and pates the data in Cell "A2". for Example "Market" and then after the search it copies 12 rows upwards and 10 columns from the Cell that the word "Market" is placed. And then it copies 12 rows downwards and 10 columns from the Cell that the word "Market" is placed.
I have tried recording the same but it does not work if the Word "Market" is placed in different cell value.
View 2 Replies
View Related
Jun 27, 2013
Here is what I am trying to do in lay terms:
If A2 and B2 on Sheet("Master") are not highlighted, copy and paste them into Cell A3 and B3 on Sheet("Job List - Numeric"). Do this up to Row 50 on Sheet("Job List - Numeric"). Once Row 50 is filled, jump to pasting to D3 and E3 on Sheet("Job List - Numeric") and continue up to Row 50 and so on....
I need to do this on one sheet in numerical order based upon Column A and another sheet in alphabetical order based upon Column B.
Here is what I have in code so far:
Sub Final()
Application.ScreenUpdating = False
Dim c As Integer
Dim x As Integer
For Row = 2 To 145
Range(ActiveCell, Cells(ActiveCell.Row, ActiveCell.Column + 1)).Select
[Code] .......
View 3 Replies
View Related
Feb 12, 2014
I am trying to write a simple macro to copy a drop down list I created in cell O2 and then paste in the same sheet. I need it to paste starting in cell A2 and then move to A4 and so on for every even row cell through A9778. I would also like it to keep a border around the cell. I can't find direction on how to tell it every even cell or defining x and then doing x + 1...
View 3 Replies
View Related
