I have gotten good modifying existing ones to fit my purpose but still have a lot to learn about creating them. I would like help in creating a macro that would search out several sheets (JanD.....DecD) and search for names in column K and a location name in column L. If the contents of the cells do not meet the criteria of name and location then I want the name to be changed to "OTHER".
View 9 RepliesHTML Code:
Sub CopyTimeColumn()
Dim tFIND As Range
On Error Resume Next
With ActiveSheet
Set tFIND = .Range("1:10").Find("Time", LookIn:=xlValues, LookAt:=xlWhole)
If tFIND Is Nothing Then
[Code] ............
This code searches the "Time" Column in first ten rows and copies it to another sheet...
If I have encountered with such a column whose title is "Time in seconds" then it will not search this column...What i want is the modification of this code such that it can detect column which contains any part of "Time" word in it ...
I am trying to add up all values from the cell above the search criteria. Although sumifs does work well, it wont search the entire sheet, it only works in specified rows.
Also, the problem is that the values to be added are determined via a vlookup based off of a cell whose value is chosen by a drop down choice.
If I have a 'key' value in a cell in one sheet, i want to use that value to find the cell in another sheet containing the 'key' and return the row number of the cell, if more than one value then I would like to be able to loop through all the rows containing that 'key' value returning the row number of each hit, kind of a programmatic version of vlookup?
I would like for C1 to search through the data in A1 and see if it contains a match for any of the zip codes listed in column B. If it does than I want it to report the zip that was matched and cell in C2. If there is no match then I want it to return the value, No Match in C2. I need the whole column B to be included in this code.
ABC8154;slkjljalkjdldjldjklj83838kljlajalja794021234ball5699794018154aaaaksjsjslks794031234ball5699794027940379404
I have a file that needs to copy/change and paste data if column H has the following 3 abbrev but each of them has its paste criteria. see details below.
1) In column H, if abbrev ="Prod 10", insert 9 rows and then copy and paste but the codes in column G of the copied rows need to change to different numbers.
2) If abbrev ="Prod 4", change the code of the following 3 rows to 44298.
3) If abbrev ="Prod 14", insert 13 rows and then copy and paste.
Is it possible to have a macro to do these tasks?
I have a workbook with many many sheets in it. The first sheet contains a single column with about 10,000 different values. I'd like to use each of these as search criteria against ALL data in the other sheets (of which there are a good 50 or so). If matches are found (they don't have to be exact case), then I'd like two things to happen:
1. The rows containing the matched search criteria in the first sheet are highlighted.
2. In the cells adjacent to the search criteria in the first sheet, hyperlinks to the matched data are created and named after the sheet upon which this matched data appears.
I've attached a sample file to this post with ideal sample 'answers' to queries made of the first 2 terms.
Search Column A for a name (using an array if possible). If it finds this name, add a string of text to the AA cell on the same row that it found the name on.
For example,
If in A1 it finds the specified name. It then adds a string of text to AA1.
I am new to VBA and am having difficulties in getting a find function to successfully locate search criteria within cell. When the search criteria matches exactly that of the cell contents then the code works; however should the search criteria only form part of the total cell contents (such as a seach for "the" in a cell containing "the cat sat on the mat") the code doesn't recognise it.
Essentially, I need the code to search a range for the required string and if found within a cell activate that cell and populate a combobox with the full cell contents of the activecell.offset(0,-2).
The relevant section of code attached below:
Dim role_count as range
Dim role as string
If Application.WorksheetFunction.CountIf(Range("Role_Count"), Role) 0 Then
Range("role_count").Select
Selection.Find(What:=Role, After:=ActiveCell, LookIn:=xlFormulas, LookAt:= _
xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False _
, SearchFormat:=False).Activate
Me.Controls(ComboBoxName) = ActiveCell.Offset(0, -2).Value
I have a series of data that I am trying to process based on various criteria and though this site I have solved most of the (simple) problems I had. I have one last problem to solve.
I need to add the previous cell to the next one based on a cell value in a different column.
Example: I want to add F2 to F3 if H3=3 but I need it to work so that if H4=3 it will add F3 to F4 and F3 now equal the new value i.e. (F2+F3). If H5 doesn't = 3 then F5=F5. I need the output to be a value not just an equation as I plan on going back and deleting all rows with H=3 in them.
P.S. I don't mind if the output of the calculation of the F column is to a new column or overwrites F. Overwriting would be easier for when I go back through and delete rows based on H=3.
I need to conduct keyword searches in excel and color the keywords a different color without changing the font color of the entire cell. now, i found some code from another thread that does this, but i cant seem to get it to work with more than 2 keywords. i need fine-tuning the provided code to do what i need it to do.
[URL]
the VBA code i used was this:
[Code].....
I was playing around with the example, the Cat_Mouse.xlsm, and when i modified the 'myList' and 'myColor' arrays, it does not work.
Cat_Mouse.xlsm
For example, I modified the code to add the word bat:
[Code] .....
When i run the macros, the word "Bat" does not become colored red. interestingly enough, when i substitute the word "bat" for the word "hat" in the "myLIST array, the word "hat" does change to the red font.
I am looking to use this code to address keywords in my excel file by coloring all key words red and i have more than 10 key words.
I have an 'Update' Module that search the value of the Userform1.txt_sc.Value in Column B, but I want to search to 2 criteria, how can i amend the below code to search for 2 criteria ( userform1.txt_sc.value & userform1.txt_linenum.value )
View 2 Replies View RelatedI have a worksheet that when a row changes based on the value of column B, I want to remove all of the formulas found in the row but keep the existing values, and then change the color of the row.
In the sample file attached, when the value is "Closed", that row will keep the existing values and then it gets grayed out. Rows that are still marked "Open" need to retain the formulas in case other information changes.
I have tried copy/paste special using autofiltering but that doesn't work because of the hidden lines. This file changes on a daily basis and I need a quick way to update the file.
SampleFile.xlsx
I am having such a difficult time creating a macro that will reduce the 5+hours I have to spend each week manually copying & pasting all of this data. I making an IMMENSE difference in this worker bee's life!
I have a workbook with two sheets (Sheet1 & Sheet2). Sheet1 has license #'s in column A and the state that the license belongs to in column B like this:
COLUMN ACOLUMN B11111Alaska11112Alabama11113Arkansas11114Arkansas
Sheet2 has three columns. Column A has the license #'s, column B has the state that the license belongs to and Columns C shows a line-of-authority tied to that license #.
COLUMN ACOLUMN BCOLUMN
C11111AlaskaProperty11111AlaskaCasualty11112AlaskaLife11112AlaskaHealth11112
AlabamaProperty11112AlabamaCasualty11113ArkansasLife11113ArkansasHealth11114
ArkansasLife11114ArkansasHealth12345ArizonaProperty
I'm trying to write a macro that will compare the license # and state in Sheet1 to the license # and state in Sheet2. If it matches, append the contents of Column C to the corresponding row in Sheet1.
Here's the thing...Sheet2 contains the entries for all licenses in the company (so this table is HUGE). And there are multiple entries for each state license # (notice how there's two entries above for AK license # 11111 - one for the Property line and one for the Casualty line.
After my macro is run, I want Sheet1 to show all the lines-of-authority on a single line. So if I ran my macro on the above example, after it's run I would have this in Sheet1:
COLUMN ACOLUMN BCOLUMN
C11111AlaskaProperty Casualty11112AlabamaProperty Casualty11113
ArkansasLife Health11114ArkansasLife Health
i would like to use a macro to check whether the string present in a cell contains special characters like @,#,$,%,^,&,*. i need to do this using a macro. is there an in-built function to do this or is there any other way to do this.
View 9 Replies View Related1st - Need a macro to change a range of cells colours based on a single cell having a value greater than 0.001. ie. cells A1 - G1 need to change to grey based on cell F1 having a value greater than 0.001 entered in it?
2nd - Also a macro for deleting the text contents of cell C1 based on cell F1 having a value greater than 0.001. Therefor if cell F1 has a number greater than 0.001 it changes the colour of celss A1 - G1 and also deletes the text in cell C1?
how would I go about having a button on my worksheet which is clicked will open up Internet Explorer and search the information located in a specific cell?
View 4 Replies View RelatedI am trying to write a macro that is able to take a "Part ID" from a column on Sheet "Temp", search sheet "Parts" for that "Part ID" in Column A, copy the corresponding description (listed in next column B) and paste that description into a third sheet "Sheet1" Column D. I would then need to repeat for all lines in sheet "temp"
I could most likely use an IF statement to do the search, but I was hoping to use excel's search function to make it quicker as there are over 1000 parts. For example:
Dim partID = String
Selection.Find(What:= partID, After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False).Activate
What I am getting stuck on is once the search finds my text in Column A of Parts, how to copy the Description in Column B into Column D of "Sheet 1". A sample file is attached. The output in Column D of "Sheet 1" should say in this example:
Circle
Square
Circle
Rectangle
Im am trying to create a search marco button that allows me to search in multiple worksheets in one work book. I came across this CODE the first part of it works. It pops open user input box and ask for the word that i would like to search but the this error message pops up Runtime error1004 Method 'range" of object'_Global'failed and i dont know what to do
Private Sub SearchButton_Click()
SearchString = InputBox("Enter Search String", "Search")
If SearchString = "" Then Exit Sub
For Each c In Range(myRange)
If InStr(LCase(CStr(c)), LCase(SearchString)) Then
[Code]....
I am trying to search for multiple values in a cell with Multiple criteria.
E.g: Please find attached the sample excel data.
I tried using VLOOKUP which is not working as I am having multiple values in column A.
I am trying to get a code which searches each row for a keyword, and then assigns a value to it depending on what group of keywords it is.
For example, if the Name or Comment mentions certain fruit keywords, I want it to assign the value: "Fruit", and if it mentions certain vegetable keywords, I want to assign it "Vegetables", and if it is unrelated to either, I want to keep it blank. If the name/comment mentions both fruit and vegetables then I want it to say "Error".
Since the keywords I am using are mostly two letters, I want the search to only search for the two letters on its own, and not as part of a sentence. e.g. if the key word is ED, I don't want it to return a value for "I rested". Instead, I want it to stay blank.
i.e. I want the code to take information from column A and B, and assign a value based on the keywords in column D and E. As an example:
A B C
Name Comment Value
V1 Eating vegetables are good for you Vegetable
null lock out of ep. Fruit
S-1 It is JUST
Fruit-sp Error
D E
Fruit Vegetable
EP SW
KG SP
ST CM
BV LP
The formula I used so far is this: where C3 is the first value
C3=IF(OR(ISNUMBER(LOOKUP(100,SEARCH(Sheet1!$D$2:$D$6,A3))),ISNUMBER(LOOKUP(100,SEARCH(Sheet1!$D$2:$D$6,B3)))),"Fruit","")&IF(OR(ISNUMBER(LOOKUP(100,SEARCH(Sheet1!$E$2:$E$6,A3))),ISNUMBER(LOOKUP(100,SEARCH($E$2:$E$6,B3)))),"Vegetable","")
In columns D and E I put a leading and trailing space between each word to only search for the keywords themselves, and not as part of a word. (e.g. ST is correct instead of haSTe).
This formula seems to work only for 60% of the information, problems occur when the keyword is at the end of comment sentence: the value is blank. e.g. in row B4 of the table I made above my formula returns a blank.
Is it possible to search a worksheet that may contain different number of rows (from day to day) and for every instance of a word like "HOLD" is found in column "C" to Color that intire Row Red and also Bold the Row as well?
View 9 Replies View RelatedI would Need a macro which would Search a Keyword in the excel sheet and copies and pates the data in Cell "A2". for Example "Market" and then after the search it copies 12 rows upwards and 10 columns from the Cell that the word "Market" is placed. And then it copies 12 rows downwards and 10 columns from the Cell that the word "Market" is placed.
I have tried recording the same but it does not work if the Word "Market" is placed in different cell value.
i am currently using the macro below to import text files into a spreadsheet. Currently, it begins the import in cell A1 which is what I recorded it to do. how do I change the code to begin the import on the active cell?
View 2 Replies View RelatedI have code which changes the worksheet tab names based on contents of a cell. I borrowed some very useful code from a previous thread. I'd like to modify the code so that the tab name updates everytime the cell contents change.
My code is below:
Code:
Sub ReNamer()
For L = 3 To 9
Sheets(L).Name = Sheets(L).Range("A1").Value
Next
End Sub
Is it possible to run a macro when the value of a partcular cell is changed? (and if so how!)
View 9 Replies View Related Basically, I need to reformat a set of data (see before and after). A specific column should only contain 1 value, if there is more than 1 value it will be separated by a comma. If this column contains more than 1 set of data then I would need to insert a row and duplicate the information based on how many different sets there are. All the copied data should remain the same with the exception of the "Key" column, it should only have 1 value and each copied row should contain the corresponding value in the key field.
BTW - it could be on the same sheet or a different worksheet (doesn't matter)
BEFORE
Name Number KEY Date
Name1 1 a,b,c 12/1/2011
Name2 2 x 12/1/2011
Name 3 5 one,three 12/1/2011
AFTER
Name Number KEY Date
Name1 1 a 12/1/2011
Name1 1 b 12/1/2011
Name1 1 c 12/1/2011
Name2 2 x 12/1/2011
Name 3 5 one 12/1/2011
Name 3 5 three 12/1/2011
Three cells - A1:A3. If A1's value is modified, I would like to have some sort of event macro that recognizes the change and thus initiates and clears the values of cells A2 and A3. Basically I don't want to have to user-initiate the macro...but have the actually changing of A1's value initiate the macro.
View 6 Replies View RelatedI am trying to run a macro when any cell in a range changes. I have got this to run, but only on one cell, not any of the cells in a range.
Working code:
[Code]....
Non working Code:
[Code] .........
I am at a loss as to why the range code won't work, or why the first code won't work without makig the cell reference absolute.
I'm trying to make a macro that changes the backcolor of a cell when it's value is higher then 3. I could use some assistance with the code down below which is too long.
View 5 Replies View Related