Via Macro, Search Item In Cell And Bold/Color Row If Found
Dec 7, 2006
Is it possible to search a worksheet that may contain different number of rows (from day to day) and for every instance of a word like "HOLD" is found in column "C" to Color that intire Row Red and also Bold the Row as well?
You can find attached the workbook I am working on.
In my workbook I have four sheets. Only two sheets are relevant in this case: "Sheet1" and "List". On "Sheet1" there in column A there is big range of codenumbers (highlighted with red). On the "List" worksheet I have a smaller list (highlighted with green).
I have a code also in module1 but the code is not working.
I would like my macro to do the following. Check the code number from the "List" worksheet (green) and search for it in "Sheet1" column A (red). If this codnumber can be found in column A then leave the number on the green list. If it cannot be found in column A then, delete it from the green list. If you open the file, you can see on the "List" worksheet that there are three code numbers in the green range. The upper and the bottom code number can be found on the "Sheet1" column A (red) range, but the middle number cannot be found. So if the macro would work correctly then it would delete the middle number, and leave the other two untouched!
I'm trying to have a macro run to search a specific column (S) for a particular text value "y" and if true it will change the font to bold and the color to red for the entire row of the cell that contains the "y". the column is part of a data table that is constantly refreshed not sure if that makes a difference or not.
I have written a macro to convert data from a report exported from Salesforce.com to a format that is acceptable for upload to our website. One of the necessary conversions is to convert values from a Boolean value to a Y/N value. I wrote a macro with a series of search-replace commands such as this:
Code: 'replace 0s and 1s in "Direct Billing" column with appropriate data Columns("R:R").Select Selection.Replace What:="0", Replacement:="N", LookAt:=xlPart, _ SearchOrder:=xlByRows, MatchCase:=False, SearchFormat:=False, _ ReplaceFormat:=False This code generates a warning when no "0" values are found:
"Microsoft Office Excel cannot find any data to replace. Check if your search formatting and criteria are defined correctly. If you are sure that matching data exists in this workbook, it may be on a protected sheet. Excel cannot replace data on a protected worksheet."
I wish to do the following & and am struggling (attempted to do it in Conditional Formatting but have not succeeded)
I want to do the following :-
If the date in cell A1 has no date entered i.e blank then fill D1 in Yellow If a date in cell B1 is past then fill Cell D1 Red If a date in cell C1 is entered with a date(any) then fill D1 in Green
I need a macro that would change the cell background color in a calendar according to list of dates found in a table (Holidays & Vacations) which can changes on a yearly basis.
I have two workbooks, one is used for importing items to the site while the other is a monthly product list. In each of these I have a list of sku codes. I need a macro that will search each sku from the import to the entire product workbook. If it's found then delete the whole row from the product workbook. I have attached the examples below.
I have two sheets with data. I wont excel to look for a value in colum A in sheet 2 the value to look for is defined in colum a in shet 1. If value is found it should insert in sheet one the value that is in the cell next to the found value. The data is not sorted. I have attempted and failed with using different functions.
I have a file which has in excess of 12,000 rows of data in 5 columns (sample file attached with fake data). The five rows are:
"First Name" "Last Name" "Name" (uses CONCATENATE to combine column A & B) "Email" "Date Attended"
There will be duplications in the list as people will have attended more than once over the years. What I want to do is search through the email addresses (Column D with D1 being the header) and where there is a duplicate email address copy the cell to the right of the duplicate (F#) into the next available cell to the right of the first occurance and then delete the row with the duplicated email address.
I plan to place a drop down list (combo box) in a WS where I upon selection of one item from that list will move me to the place in the same WS where the item selected is to be found. Hyperlinks are a theory, but the WS is protected and will stay protected. A drop down is preferred.
I haven't worked with this topics for quite some time and might have forgotten some basics.
I am merging columns. Col B has all text in bold. Col C has all text in regular font. When I use ASAP to merge, the merged column comes out all bold. When I use a formula to merge the merged column comes out all regular. What I want is for the merged column to contain the bold text from Col B in bold, and the regular text from Col C in regular.
What I want is...
This is for service plan B: Take all data and transer to new server.
What I am getting is...
This is for service plan B:Take all data and transer to new server.
OR
This is for service plan B:Take all data and transer to new server.
I am trying to create a macro that if a value in a cell in column A is bold, then the value in the same row in column H is bold, then loop it to run on the rest of the worksheet.
When I do a SEARCH operation to find the number 10 among hundreds of cells containing data, I'm often finding the way Excel highlights the cell that meets the search result is not easy enough to see.
Is there anyway I could setup Excel so that the resulting cell that meets the search result is highlighted in a RED border or RED Fill? I would like the cell that meets the search result to scream at me with a color highlight that is not easy to miss.
I have this worksheet, that was created by some one else, that has formulas all over the place. What I want to do is click a button and have all the cells that contain a formula to change the font color to red and fill the cell with a certain color.
I am going to create a userform with one command button. I know the code will go in the command button.
I'm having trouble trying to setup a spreadsheet for work to do production scheduling. I have a temporary thing working so far but, but there is a minor hickup with certain products.
Products A, B & C can be processed normally on their own and each occurrence is identified with its unique serial number and can be traced through the schedule. The problem is that there has to be 3 occurrences of Products E & F before they can be processed in a single batch (They're smaller and its more efficient to process them together).
I'm struggling in that I can't process 1/3 of product E (Serial no. xyz123).
I would need to be able to identify 3 of these products, batch them together and follow them through the schedule.
Plus, if there was 8 of product E to be made, I can only process the first 6 which leaves the last 2 out.
I need to conduct keyword searches in excel and color the keywords a different color without changing the font color of the entire cell. now, i found some code from another thread that does this, but i cant seem to get it to work with more than 2 keywords. i need fine-tuning the provided code to do what i need it to do.
[URL]
the VBA code i used was this:
[Code].....
I was playing around with the example, the Cat_Mouse.xlsm, and when i modified the 'myList' and 'myColor' arrays, it does not work.
Cat_Mouse.xlsm
For example, I modified the code to add the word bat:
[Code] .....
When i run the macros, the word "Bat" does not become colored red. interestingly enough, when i substitute the word "bat" for the word "hat" in the "myLIST array, the word "hat" does change to the red font.
I am looking to use this code to address keywords in my excel file by coloring all key words red and i have more than 10 key words.
I manage to do a proper search and the return value is correct, but the problem is when I don't get the correct value excel gives me an error, what I can add to make the result just to give me MsgBox "Not found"?
Code below:
Set Ran = Worksheets(2).Range("A:A").Find(CompName, lookat:=xlPart) If Not Ran Is Nothing Then MatchRow = Ran.Row MatchCol = Ran.Column End If
I am looping in Excel to find "NUMBER OF EMPLOYEES". IF found I want to go up one row and replace the first 4 digits with " 9ZZ". The Line 1 data will alway be different so I just want to replace the first 4 digits. I don't want it to effect the rest of the line.
Example: Line 1 - 100 6300 BRCH TOTALS Line 2 - NUMBER OF EMPLOYEES
RESULTS NEEDED:
Line 1 - 9ZZ 6300 BRCH TOTALS Line 2 - NUMBE OF EMPLOYEES
I have a workbook with a sheet for every month. I have a searchbox searching for a client and jumping to that location. The problem I am having is that it takes me to the last occurence in the workbook if there is more that one client with the search criteria. Do you have any suggestions for a searchbox that whould take me to the first occurence and give me an option to go to the next occurence in the workbook. Please see the code below that I am using currently using.
Private Sub CommandButton1_Click() Dim ws As Worksheet
Dim cl As Range, rng As Range For Each ws In ActiveWorkbook.Worksheets
Set rng = ws.UsedRange With rng Set cl = .Find(Me.TextBox1.Value, LookIn:=xlValues)
I need a VBA code that will search column H for any value that DOES NOT start with "9" (this is a character field). If it finds a cell that doesn't start with "9", I would like it to delete the entire row. It will need to repeat this process for every cell in Column H that has a value and then stop.
Standard bar chart. They want our company to always be Yellow. This is a industry standard. Our columns (the bar) needs to be Yellow. As new companies are added to the series, it might change locations in the order. For now, the location is 9th.
Can use formula or use VBA. Can't seem to find a way using the Excel interface to do this.
Is it possible to have a combo box in excel, where, when an item is selected, it is assigned a colour depending on which item it is? Eg, The combo box list has item 1, and item 2. If I select item1, then the text becomes red, if I select item 2, the text becomes blue. If not possible using combo box, what method can I use?
Any way to use a search form I've created to delete data from the original sheet. What I'm doing here is using advanced filter to copy data from the original database onto a temporary sheet to display in this list box. I've gotten almost everything to work properly, but since this is populated by advanced filter, I don't really even know where to start on my delete button.
Code: Private Sub Search() Dim Criteria As Range Dim SearchRange As Range Dim SearchResults As Range Set Criteria = Range("Values!Criteria")
[Code] ......
So I was thinking something like this:
Code: Private Sub cmdDelete_Click() lstResults.Value.delete End Sub
Searching a text string on Sheet 1 to see if it contains any item in a list (on Sheet 2 Column 1) and if so return the value of Sheet 2 Column 2 next to the list item found?
It's a budget problem: Sheet 1 has my downloaded Visa statements. I want to categorise all items.
Eg Any item containing the string 'safeway' is categorised as 'General expenses'. So the list on Sheet 2 has an item called 'safeway' and in the next column 'General expenses'.
And for the item on Sheet 1 'BPAYN BUPA AUSTRALIA BPAY MBF monthly' I have an item in Sheet 2 that is simply 'BUPA' with category 'Medical expenses'.
I wish to compare each item (4-8 digit alphanumeric ID) in a list in column B of worksheet 1 (Portfolio) to all of the items in column B of worksheet 3 (EssBase Cap). The data (ID) in column B of 'EssBase Cap'! is concatenated with its description so my code needs to strip off the leading zeros and everything after "-" in order to do the comparison. Once a match is found it should copy the corresponding values in 'EssBase Cap'! for that row, column D and E to 'Portfolio' Column J, and K. I have created some pseudo code and need to translate this to Excel VBA
Dim IBSPWD As String Dim ProjectPCN As String Dim Pos As Integer Dim I As Integer Dim J As Integer For I = 3 To 'to end of range ? WHat is the code to find end of the range IE no more data? For J = 6 'to end of range ? The nested for loop will check each item in Portfollio and compare it to each item in Essbase Cap IBSPWD = 'EssBase Cap'!Cell(J,"B") 'fill in the string with data Pos = InStr(1, IBSPWD, "-", vbTextCompare) 'find length of the string befor "-"...............................
I have data in cells B2:E2 and this can go down 100+ rows.
In column B i have invoice numbers but some cells contain the word "Deposit".
I have sorted this data so that the invoice numbers appear first and then all the Deposits.
I need a code to find the first instance of the word "Deposit" and to insert a row so that all the invoices and Deposits are seperated by a single row.
I need a VBA script that can display a search box on multiple sheets within the same workbook similar to using ctrl + F and search values in column B only. If there is text or the row happens to be empty then it should skip that and only search numbers. Also the numbers in column B range from 50000 to 89000 and if there is a wrong number entered then I want to have a pop up box saying Error: invalid value or something like that.
Sub search_box() Range("B49000").Select Cells.Find(What:="some#", After:=ActiveCell, LookIn:=xlValues, LookAt:= _ xlWhole, SearchOrder:=xlByColumns, SearchDirection:=xlNext, MatchCase:= _ False, SearchFormat:=False).Activate Cells.FindNext(After:=ActiveCell).Activate End Sub
In a large spreadsheet that receives external data, I have codes (U, N or V) allocated at various times to different rows as shown in sample worksheet attached. Elsewhere in the spreadsheet, I need to display (for later export) these codes along with their respective number in a sorted list. Please review the attached:
In the spreadsheet you'll see a column of codes, the next column is the data reference number, then to the right is three columns, one for each code. As displayed in the sample book attached, each Code column is to display the data reference number (from column 2)that matches that column's code.
What formula can I use to list these numbers in the appropriate columns?
I was looking at this VBA code the other day and i was wandering what i meant. I thought if somone could expliane line by line,
Sub CommandButton1_Click()
Dim ThisAddress$, Found, FirstAddress Dim Lost$, N&, NextSheet& Dim CurrentArea As Range, SelectedRegion As Range Dim Reply As VbMsgBoxResult Dim FirstSheet As Worksheet Dim Ws As Worksheet Dim Wks As Worksheet Dim Sht As Worksheet