Three cells - A1:A3. If A1's value is modified, I would like to have some sort of event macro that recognizes the change and thus initiates and clears the values of cells A2 and A3. Basically I don't want to have to user-initiate the macro...but have the actually changing of A1's value initiate the macro.
View 6 RepliesI would like to have a userform activated when I select a specific cell "g77". I tried a code that I found while searching the forum but it did not work.
The userform name is ufMutualAid
I am not sure if it makes it any easier to write the code three times seperately or if I can put them together, but the same idea is needed for
L79 ufPersonnel
L81 ufApparatus
This is one of several questions I need to ask to perform a larger task. I want to initiate VBA code using a push button. What code do I need in the VBA to do this and rules behind using it.
View 4 Replies View RelatedI want to know what is the way to auto save our excel sheet data ?
View 3 Replies View Related1st - Need a macro to change a range of cells colours based on a single cell having a value greater than 0.001. ie. cells A1 - G1 need to change to grey based on cell F1 having a value greater than 0.001 entered in it?
2nd - Also a macro for deleting the text contents of cell C1 based on cell F1 having a value greater than 0.001. Therefor if cell F1 has a number greater than 0.001 it changes the colour of celss A1 - G1 and also deletes the text in cell C1?
i am currently using the macro below to import text files into a spreadsheet. Currently, it begins the import in cell A1 which is what I recorded it to do. how do I change the code to begin the import on the active cell?
View 2 Replies View RelatedI have code which changes the worksheet tab names based on contents of a cell. I borrowed some very useful code from a previous thread. I'd like to modify the code so that the tab name updates everytime the cell contents change.
My code is below:
Code:
Sub ReNamer()
For L = 3 To 9
Sheets(L).Name = Sheets(L).Range("A1").Value
Next
End Sub
Is it possible to run a macro when the value of a partcular cell is changed? (and if so how!)
View 9 Replies View Related Basically, I need to reformat a set of data (see before and after). A specific column should only contain 1 value, if there is more than 1 value it will be separated by a comma. If this column contains more than 1 set of data then I would need to insert a row and duplicate the information based on how many different sets there are. All the copied data should remain the same with the exception of the "Key" column, it should only have 1 value and each copied row should contain the corresponding value in the key field.
BTW - it could be on the same sheet or a different worksheet (doesn't matter)
BEFORE
Name Number KEY Date
Name1 1 a,b,c 12/1/2011
Name2 2 x 12/1/2011
Name 3 5 one,three 12/1/2011
AFTER
Name Number KEY Date
Name1 1 a 12/1/2011
Name1 1 b 12/1/2011
Name1 1 c 12/1/2011
Name2 2 x 12/1/2011
Name 3 5 one 12/1/2011
Name 3 5 three 12/1/2011
I am trying to run a macro when any cell in a range changes. I have got this to run, but only on one cell, not any of the cells in a range.
Working code:
[Code]....
Non working Code:
[Code] .........
I am at a loss as to why the range code won't work, or why the first code won't work without makig the cell reference absolute.
I'm trying to make a macro that changes the backcolor of a cell when it's value is higher then 3. I could use some assistance with the code down below which is too long.
View 5 Replies View RelatedI've created a button that, when clicked, will give a time and date stamp. The issue I'm having is that when I click the button, it displays the information in the active cell. I've searched for an answer, but keep coming up blank. Here is my macro:
View 5 Replies View RelatedI'm trying to automatically change the names of the sheets in my workbook based on the contents of cell A1 in each sheet.
I found some code on some website and inserted it into the ThisWorksheet module:
Code:
Private Sub Workbook_Open()
Dim wSheet As Worksheet
On Error Resume Next
For Each wSheet In Me.Worksheets
if wSheet.Name = "SomeName" then
If wSheet.Range("A1") = "" Then
wSheet.Name = "Sheet" & wSheet.Index
[code].....
This code appears to work properly, but only when the workbook is closed and then reopened. Is there a way to make this code run anytime cell A1 in any of the sheets changes? I've found several sample codes that purport to make a macro run automatically on a cell change, but I can't figure out how to incorporate the code above with the Worksheet_Change code to make them work together.
I would like to run a macro when the value of a certain cell changes.I found the following code:
Code:
Private Sub Worksheet_Change(ByVal Target As range)
If Not Intersect(range("A1"), Target) Is Nothing Then
MsgBox "A1 has changed"
End If
End Sub
Cell A1 contains a lookup function. When the value of this cell changes, I would like to run the code. This code runs only when I change it manually.
I have following macro run when the given cell changes:
HTML Code:
Private Sub Case_Checkout(ByVal Target As Range)
Dim KeyCells As Range
Dim WS As Worksheet
Dim LkUpVal As Range
Dim LkUpRng As Range
[Code]...
It was working...and then just stopped working. I scan a barcode into cell A1 and hit enter. Can't figure out why is stopped unhiding the tab. I haven't changed anything...
I have a spreadsheet which has a version number in it on a given cell. This cell is protected as is the spreadsheet.
I want to create a macro that will target the given cell and ask user to input new value and then change the cell value.
This macro will be attached to a button.
I already know how to disable and enable spreadsheet protection but have got no clue as to go about the rest.
I have a macro that I would like to run everytime ANY cell is changed in a given worksheet. I've read some posts that explain how to do this when say ONE cell is changed, but I cannot figure out how to expand on that.
View 9 Replies View RelatedI am working on a training scheduler. In which a sheet contains the details of the trainings that are scheduled now i need that if any training is canceled then a mail needs to be sent (Status is updated in cell). I have code to send mail however the problem that i am facing is that how can i execute this macro when training is canceled. I did a search and found the following thread
How to call a macro based on a value of cell?
but the code given in the thread uses a specified cell address to execute the macro. Where as in my case I can not provide a specific cell address as any training can be canceled.
I have not used an event macro before and am trying to one update a cell when changing a cell. I am basically copying a number to another cell that is an input for a calculation and then returning the calculated value back. How do I reference r69 in the code to start the event macro?
View 2 Replies View RelatedI'm in the process of trying to get a macro to run when one cell, named "ImpVersion" changes.
Here's what I've got so far.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = Range("ImpVersion").Address Then
Call Implement
End If
0:
End Sub
The problem I'm having is that ImpVersion doesn't always exist, as it is only added in when it's needed. When ImpVersion doesn't exist, I get a 1004 error.
I would like to create a macro that will automatically change the name of the sheet any time a value is entered into cell a1. For example, in cell A1 of sheet1 I would input "Hello", and then the tab for sheet1 would be automatically renamed to "Hello".
Here's the twist - the workbook will have multiple sheets, and I want all tabs to reflect the value of a specific cell (a1) in each sheet.
For example:
value in sheet1, cell a1 = "Yes" - corresponding tab name would change to "Yes"
value in sheet2, cell a1 = "No" - corresponding tab name would change to "No"
value in sheet3, cell a1 = "Maybe" - corresponding tab name would change to "Maybe"
etc...
The "tab change" cell would always be cell a1 in each sheet.
I am still kind of new to using VBA code and my editing skills are very novice at the moment.
How would I change this Code to run on only the active cell selected and that is all, instead of the whole page?
Sub AddIFERROR()
Application.ScreenUpdating = False
Application.Calculation = xlCalculationManual
Dim xCell As Range
Dim xFormula As String
For Each xCell In Selection
If xCell.HasFormula Then
xFormula = Right(xCell.Formula, Len(xCell.Formula) - 1)
xCell.Formula = "=IFERROR(" & xFormula & ","""")"
[code]....
Trying to get this macro to auto-run after the referenced cell is changed:
Sub Headerdata()
ActiveSheet.PageSetup.RightHeader = Range ("d1").Value & Range ("e1").Value
End Sub
I got it to work in one book but it won't work in any other book...
I am trying to color a cell with a macro. I am using
ActiveCell.Offset(a,b).Value= a number then a want to change the color of the cell to yellow. When I tried to code this, my Active cell's color is changed, but not the offset cell.
How do I change the color in an "offset cell".
I have gotten good modifying existing ones to fit my purpose but still have a lot to learn about creating them. I would like help in creating a macro that would search out several sheets (JanD.....DecD) and search for names in column K and a location name in column L. If the contents of the cells do not meet the criteria of name and location then I want the name to be changed to "OTHER".
View 9 Replies View RelatedIve got a cell on a worksheet, that is controlled by a Control combo box. Is there anyway to change the value of the cell, and therefore the combo box, by using a macro. I need the macro to activate when the workbook is exited.
View 3 Replies View RelatedI have looked at a series of Change Event topics and code but can't see what I need. I simply want a macro to run automatically when a cell ....which contains the Maximum time from a range.... changes. I assume I use .... Private Sub Worksheet_Change(ByVal Target As Excel.Range) ...but I have no idea what code to use...
View 4 Replies View RelatedI have an application that updates the text string in A1 every x minutes (time may vary). I'm trying to develop a toutine that will trigger a Macro/call a function/subroutine once only on each change of data (and then not trigger again until the next change...and must only trigger on change of data in this specific cell). So the timeline looks like this
start A1 = "Apples", Fire macro once
start + 10mins A1 = "Oranges", Fire Macro Once again
start + 25mins A1 = "Pears", Fire Macro Once again
etc.
Triggering the macro is no problem but constraining to one triggering is proving a problem (for me anyway) and is really holding up my application progress.
I am using the worksheet change routine for conditional formating of more than three items.
The problem is that it only changes if I manually type within the page and does not update if the cells are updated via formulas.
To explain a little more, I have three sheets that I combine into one to help find the best rate from three companies using the following formula:
=IF(AND(MIN(PMI!C4,UG!C4,GE!C4)=PMI!C4,MIN(PMI!C4,UG!C4,GE!C4)=UG!C4,MIN(PMI!C4,UG!C4,GE!C4)=GE!C4),FIXED(PMI!C4,2)&" All",IF(AND(MIN(PMI!C4,UG!C4,GE!C4)=PMI!C4,MIN(PMI!C4,UG!C4,GE!C4)=UG!C4),FIXED(PMI!C4,2)&" PMI/UG",IF(AND(MIN(PMI!C4,UG!C4,GE!C4)=PMI!C4,MIN(PMI!C4,UG!C4,GE!C4)=GE!C4),FIXED(PMI!C4,2)&" PMI/GE",IF(AND(MIN(PMI!C4,UG!C4,UG!C4)=GE!C4,MIN(PMI!C4,UG!C4,GE!C4)=GE!C4),FIXED(UG!C4,2)&" GE/UG",IF(MIN(PMI!C4,UG!C4,GE!C4)=PMI!C4,FIXED(PMI!C4,2)&" PMI",IF(MIN(PMI!C4,UG!C4,GE!C4)=UG!C4,FIXED(UG!C4,2)&" UG",IF(MIN(PMI!C4,UG!C4,GE!C4)=GE!C4,FIXED(GE!C4,2)&" GE","ERROR")))))))
Please feel free to condense this if you like.
So when I update a reference on one of the first three sheets, the cells update on this sheet but the cell colors never change. This is the code for the worksheet change
Private Sub Worksheet_Change(ByVal Target As Range)
Dim Cel1 As Range
Dim Rng1 As Range
On Error Resume Next
Set Rng1 = ActiveSheet.Cells.SpecialCells(xlCellTypeFormulas, 1)
On Error GoTo 0
I am making a checklist for a Pda program. I need the active cell to highlight green and put an x in it for a specified range. This I have
The next part I cannot figure out -
after the cell have been highlighted once, and properly colored with an x, how can I get it to delete the fill and clear the x on the next click.
Dim x As Long
Private Sub Worksheet_SelectionChange(ByVal Target As Excel.Range)
' Set the highlighted cell to a color.
If Not Intersect(Target, Range("d28:d34")) Is Nothing Then
Target.Interior.ColorIndex = 4 ' green = true
'Set the highlighted cell to contain a text character
If Not Intersect(Target, Range("d28:d34")) Is Nothing Then
ActiveCell = "x"
End If
End If
End Sub