Add Slide Bar To The Top Of Chart?
Mar 1, 2013
What can I do with this data?
In the year 2004 I designed and built my own solar hot water heater box. It works very well and saves me and my family a lot of money every month.
To understand what was going on inside and out of the heater box I purchased a commercial interface unit that consists of a circuit board interfaced to my computer via a serial cable. There is also suitable software provided by the supplier which appears to be a Visual Basic programme or something similar.
The circuit board interfaces eight sensors. These are defined as:- Input (Zero), 3.9 M, 7.8 M, 11.7 M, 15.6 M, Outlet, Internal air and External Air. The metre distances occur by dividing the entire length of the water pipe into equal distance between Inlet and Outlet.
Once the software is set up and "started" it automatically dumps the data (which I record at five minute intervals) into an EXCEL Add-in file. At the end of a day I save the Excel file and then manipulate the data into a chart which gives a picture display of all the sensors and the temperatures recorded.
I have attached a typical Excel file for one day. I try to record most days, but if the weather is overcast and no sun appears there is little or no point in recording.
I am already au-fait on how to use Excel for Min and Max temperatures and chart creation, but I would like to ask everyone how I can add a slide bar to the top of the graph to show temperature readings?
People who read this forum thread should note that once the sun starts rising (around 08.30am) then the water in the solar heater rises dramatically. This can be seen on the attached chart.
View 10 Replies
ADVERTISEMENT
Jun 2, 2014
In the following macro, how to get the name of the chart as the slide title?
PHP Code:
Sub Range_Chart_1()
'Requires a reference to the Microsoft PowerPoint Library via the Tools - Reference menu in the VBE
Dim PPApp As PowerPoint.Application
Dim PPSlide As PowerPoint.Slide[code]....
View 2 Replies
View Related
Sep 19, 2013
I'm looking for the below requirement:
Name
Date
Sales1
Sales2
Daniel
01/18/11
4,907.00
2,038.00
[Code] ..........
Required output....
Name
Date
Sales1
Sales2
Name
Date
Sales1
Sales2
[Code] ......
Need macro code to segregate the data...
View 1 Replies
View Related
Feb 19, 2012
For the chart in the excel worksheets, does anymore know who to copy it to the powerpoint slide with VBA? (either straight copy and paste, or copy and paste in as picture?)
View 4 Replies
View Related
Oct 28, 2011
Which the best procedure to copy a chart into a powerpoint slide from a excel workbook? So that when I update the chart data in the excel workbook I can update it even in the powepoint slide ....
View 1 Replies
View Related
Dec 2, 2011
Code to go to a certain slide in Powerpoint. I kept trying to run the code in Excel VBA and it never worked.
So I said "why not try this code in Powerpoint to see if it works?' and, low and behold, it worked!
What I need is to get the code below, which works in Powerpoint VBA, to work in Excel VBA.
Code:
Sub gothere()
On Error Resume Next
ActivePresentation.SlideShowWindow.View.GotoSlide 3
If Err 0 Then ActiveWindow.View.GotoSlide 3
End Sub
View 3 Replies
View Related
Jan 17, 2014
I have a table in excel where I'm trying to hyperlink to specific side in a powerpoint presentation. I've found various sites instructing me to use #slidenumber (eg #4) at the end of the filename when editing the link, however many different combinations of slide numbers and names i use it refuses to open the deck at that set slide, always taking me to the beginning. I've tried using the bookmark option in excel but that gives a error messaging stating bookmarks cannot be used in xml files.
View 1 Replies
View Related
Jul 31, 2009
After we all spend lots of time developing a macro, we have the desire to show others who may not understand or appreciate what is going on during the time the macro is running.
What is the best way for Excel to explain/display what it is doing in "Laymens Terms" WHILE it's running? (if possible).
I was thinking of something like a slide? It would be good if the text can change at points decided by the person who put the macro together.
View 14 Replies
View Related
Feb 18, 2013
I am using an excel spread sheet as a larger display on a huge projected screen with numbers at a large charity event. It is a reverse raffle, so as your name is called you are out of the raffle. I would like to link the cell to a specific powerpoint slide which has the name and town of the specific ticket buyer. When double clicking on the cell listing their number the ticket buyers name and town would appear as a powerpoint a window in the middlle of the excel screen for all to see and then disappear after a few seconds or disappear when the next cell is double clicked. putting excel data into powerpoint slldes but not the other way around!
View 7 Replies
View Related
Aug 2, 2013
I am trying to write a macro that goes in an excel file that creates a powerpoint presentation, and puts four (4) charts in each slide.. I currently have a code that is pasting all of the charts in the same slide and I can't figure out why it isn't working (side note: I haven't attempted to resize or relocate the pictures on the powerpoint slides yet)..
Code:
'Add a reference to the Microsoft PowerPoint Library by:
'1. Go to Tools in the VBA menu
'2. Click on Reference
'3. Scroll down to Microsoft PowerPoint X.0 Object Library, check the box, and press Okay
'keep button in same location
Set btn = ActiveSheet.Shapes("CommandButton17")
With btn
btLeft = .Left
btTop = .Top
End With
[code]....
View 2 Replies
View Related
Jul 12, 2013
How do I paste the first chart into the second chart but maintain the format of the second chart?
View 2 Replies
View Related
Jan 14, 2014
I need to plot various data on top of stock charts.
This data could be irregular in date: it could be weekly, or simply random.
To plot this data by itself requires a Scatter Chart.
From what I know so far, you CANNOT DO THIS.
However, I suspect this could be done if I build a Stock Chart from scratch using a Scatter Chart.
Error bars can be used to make the tails, however, I don't know how they built the body bar which has the characteristics of a bar (border, and interior.)
But since I don't really need those two characteristics, I just need a wider error bar line that is provided in the chart edit window. I'm guess through a macro, there are wider line widths assignable.
View 5 Replies
View Related
Feb 24, 2007
I know this has been discussed a number of times, but here is my problem
I have three charts in my workbook. I want to attach a macro so that when the chart is clicked it returns to Sheet - Home. I have using the following:
worksheets("Home").activate. But after I protect each chart and the workbook, and save and exit. When I reload the Workbook it has forgotten the assigned macros and nothing happens.
View 7 Replies
View Related
Nov 27, 2011
I am looking for a creative way to display a pie chart within a data point marker of a line chart.
My database has 3 value columns, Type1, Type2 and the Total (Type1 + Type2)
these are recorded per day (Date, in Column A)
I have a line chart that displays the total by date, but I want to find a way to display the percentage split of a particular day by type.
I was thinking to load the chart image into the Data point marker, but i don't think that is the best way as the data is updated daily and I would have to do it each day for a few line charts.
The other way I was thinking about was to have a generic Pie chat in the Line chart (Maybe in a corner) and the pie would update depending on way date series was selected or Mouseover'd)
the way that I am approaching it at the movement (Not the best way and by far not the coolest way. Is to have a list of all the dates in a column next to the Line chart and using some VBA, what ever date is selected in the column the pie chart displays the corresponding data. But eh challenge is that when there is alot of dates, I am going to be scrolling up and down.
I am using Excel 2010, but I cant not use the slicer's as the other users do not have 2010, they have 2007.
View 1 Replies
View Related
Dec 29, 2011
I have a spreadsheet created in Excel 2003 (which is what we use at work, unfortunately).
My employees periodically take a test to ensure they have certain items memorized (or are making progress to that end). The spreadsheet rows show all 46 of my employees, and their test scores. The columns are the dates that the tests are administered. I can create a line graph based on the chart data, and interpolate these data with no problems.
The problem is that there are 46 employees! 46 lines on the same graph make for a very cluttered, hard to understand visual. I want to simplify the view by "filtering out" some of the data.
I have an additional column in my spreadsheet for each employee's work area (Area 1, Area 2, etc), and another column with data based on first letter of last name (the values here could be "A-G", "H-M", "N-S" and "T-Z", for example). I figure i could filter my line graph based on these two columns. For example, somehow select just Area 1, and reduce the number of lines on the graph to 16. Or better yet, Choose "Area 2" AND "A-M" and end up with 7 employees (and therefore 7 lines on the graph).
Here's what i have tried:
1) Select the work area column, and use the Filter, which created a drop-down list at the column heading. When i use this drop-down list, i can easily filter the data in the worksheet by Work Area, but this is not reflected in the line graph, which still shows all 46 lines. The problem was that i forgot that i had set the Calculation Options to "Manual". Setting this to "Automatic" (or leaving it on Manual and pressing F9) solved the problem, as the chart now updates when i use the filters. Calculation options are under the "Formula" tab in 2007, or in Tools -> Options -> [either calculation or formula, i forget what it's called] in 2003.
2) Create several separate line graphs in several separate sheets. I wouldn't want to assign someone else the task of maintaining a spreadsheet of such inefficient design.
View 1 Replies
View Related
Jul 14, 2012
I have created a population pyramid and want to add another chart on the secondary axis which I can do. The part which I seem not to be able to complete is getting the line chart secondary axis to read from the primary y axis. It seems to add a new axis, even when I delete this the line chart does not read correctly.
View 1 Replies
View Related
Apr 18, 2013
How can I add missing values to the axis in a pivot chart line chart? I have a numerical X-axis with values such as 0,1,5,8,14, etc. I have another set of Y values that correspond to the X values. If this was an XY-scatter plot I'd be able to plot X vs. Y and connect the dots for "gaps" in the X values. Since it's a pivot chart I cannot use an XY-scatter plot, I can only use a line chart. The line chart doesn't give me the ability to add the "missing" values, so it gives the impression that my data is more closely packed than it is. The data source is external to my spreadsheet, so I cannot add the values before creating the pivot table/chart.
View 1 Replies
View Related
Mar 26, 2009
I am trying to combine data from multiple worksheets and make a chart. I have about 200 keywords in every worksheet (about 50), and some of them repeat themselves through worksheets and some don't. For every keyword, I have an associated value in the next column that I want to portray over time (each worksheet is for a different period).
So what I need to figure out is how to be able to pick any 10 keywords from the worksheets and put them in a line chart where I can see the associated value for each period for every worksheet so I can compare my keywords' efficiency. The tricky part is that some worksheets do not contain the keyword and other worksheets contain the keyword in a different cell than the previous wsheet.
View 4 Replies
View Related
Jun 30, 2009
I would like combine (overlay) a bubble chart with a connected point scatter chart. I understand that, without VBA, this is not possible. However, I understand that, by using VBA, the markers of a scatter chart can be configured as circles with their size proportional to values in a specified column. This pseudo-bubble chart can then easily be combined with a connected point scatter chart.
My question is: does anyone have any VBA code to share that shows how to configure a scatter chart as the type of pseudo-bubble chart described above.
View 2 Replies
View Related
Feb 15, 2012
I am trying to overlay a line chart on top of a stacked column chart. The stacked column chart is a chart where the x axis is dates and the y axis is amount. The line chart is a projected amount that I will reach in few years; the x axis is the date while the y axis is an amount. I can get a chart that has a line and stacked columns, but ever time, the dates get messed up. The line has an extremely wide date range while the columns only have about a month of data.
View 9 Replies
View Related
Jan 22, 2008
Is there a way to display only the current month and the past 11 months in a Line Chart in Excel? So if I was to print Jan 2008 Excel graph, it would only display Feb 2007 - Jan 2008 data charting.
The spreadsheet of the data contains data for Jan 2005 - Jan 2008 so far, but only the current month with the past 11 months should display in the line chart depending on what is the current month.
View 13 Replies
View Related
Jul 19, 2012
My question is regarding changing properties in a chart without activating it. My current example is with adding data labels, but there are many other instances I could use this information in. Here is my current code:
VB: ActiveChart.SeriesCollection(2).ApplyDataLabels
However, I was hoping to replace it with something like this:
VB: Sheets("Dashboard").ChartObjects("Chart 1").SeriesCollection(2).ApplyDataLabels
I get the "Object doesn't support this property/method" error. Is there a way to do this? It just seems inefficient to have to activate the chart in order to make changes.
View 2 Replies
View Related
Sep 15, 2014
In the attached file I have the data which shows me the market size in value, my market share in value & I did a calculation to get the percentage. What I need is a chart that shows me the market size in column graph, my market share in line graph and I want the percentages to be showing also.
View 3 Replies
View Related
Dec 17, 2013
I have created a pie chart showing top 10 best selling categories. However, on this pie chart, I want %age of overall sales to be shown.
At the moment say I put in the following
Catalogue 1 100
Catalogue 2 98
Catalogue 3 92
Catalogue 4 85
Catalogue 5 84
Catalogue 6 75
[Code]....
I add Data Labels and select the percentages. This shows at Cat 1 having 12.5% of the sales (100 of 800 sales), Cat 2 having 12.25%, and so on..... However, what you don't see is the following data:
Catalogue 11 60
Catalogue 12 58
Catalogue 13 57
Catalogue 14 57
Catalogue 15 56
So based on 1,088 sales, Cat 1 at 100 is actually only 9.19% of TOTAL sales.
I understand what is happening, the chart is giving the percentage based on the data inputted into the chart.
I did consider adding an 11th category to the chart, which was the total of Catalogues 11-15. Whilst this does give a more accurate percentage figure (as now all sales have been inputted), it makes the chart look ****
Is there a way of either adding the 11th category, and then "hiding" it, so that the chart doesn't display it, but uses it's value to calculate Catalogues 1-10s percentage?
BTW: The reason I ask is that I could be dealing with anywhere from 30 to over 100 catalogues. So it's not ideal showing the others in 1 chart.
View 1 Replies
View Related
Nov 28, 2008
I have a pareto chart(Bar & Cumulative Line Chart) that I would like to have the line orginate at x = 0 & y = 0 without changing the position of the other points on the line chart.
Basically this is for better visual appearance. When I add a 0 to the table, it skews the alignment of the line chart with the corresponding bar chart.
View 7 Replies
View Related
Jun 28, 2009
I would like to combine / overlay a bubble chart and scatter chart with straight connectors.
I understand that, without VBA, it is not possible to combine a bubble chart with a scatter chart.
Unfortunately, I am a VBA newbie, and so I cannot write my own code (though I can usually adapt code to my specific environment).
My question is: does anyone have VBA code to share that will convert a scatter chart series (x,y data in 2 columns) to a bubble-style chart (bubble radius in 3rd column)?
View 2 Replies
View Related
Feb 5, 2010
Attached is the sample data worksheet. Chart 1 is XY type chart using Seconds (2nd column of sample sheet as x-axis from 42510 to 42530). How do I change it to Line chart using Time (1st column of sample sheet as the X-axis) retaining same data from 42510 to 42530 on both primary and secondary axis?. And how do I again change it back to XY chart?
View 3 Replies
View Related
Jun 30, 2008
I have a chart with 3 data series. The series are located in columns A, B and C respectively. Series I is a general number anywhere from 0 to 100,000. Series 2 is also a number, but is is devided by series 1. So, if series 1 was 100,000 then series two would be 25,000/100,000 which is 0.25. Series three will always be numerator of series 2 or 25,000 in this example. The numerator, or the 25,000 will never change, so, in my example, series three will be a straight line across the chart because it is always 25,000.
In my example, the .25 is plotted on the left value axes, and series one is plotted on the right value acccess (secondary axis). Series three is just a line in the middle.
My problem is that sometimes the line, series 3, doesn't match the values in both the right and left values axes. So, if series one is 48,000, then series two would be 48,000/48,000 = 1, and series three would be 48000 - the straight line. The third series should be a line touching the 48,000 on the right and the number 1 on the left. It does touch the 48000 on the left, but is below the number 1 on the left.
View 9 Replies
View Related
Aug 31, 2006
I'm looking for the excel model object chart and class diagram. I find the model object's description in the microsoft page, however i'm liked to have the object model and the class diagram in chart or picture.
View 5 Replies
View Related
Aug 1, 2007
I got a set of data which is only 2 colums collecting data problems. The output i get is a time stamp and a fault. Im looking to set a chart up with the time been on the X - axis and number of problems per hour on the Y - axis.
View 7 Replies
View Related
