I have data in cells A1:Z1. The data is all 1 digit numbers, but sometimes they have asterisks behind the number. For instance in cell A1, I have 4, but in B1 I have 3**. I want to take the first digit of each cell and add it together and the result to be in AA1. The only thing I can think of doing is =SUM(LEFT(A1), LEFT(B1)...) but that's going to take too long (especially as I add columns).
View 3 Replies
I know you can take a number from one cell and combine it with number from another cell and make it one number. What I need to do is the reverse. Take a two digit number in a cell and separate it into single digits in two cells. If you have the number 50 in a cell, then is there a formula that will take the 5 and put it in cell and take the 0 and put it in the cell beside it?
View 4 Replies View RelatedI've got a column of IP addresses and want to increment the last octet. Starting with IP block in column A, I select those and drag to auto-fill to the right. Some cells increment and others don't. I'm using Excel 2003 on Windows XP.
View 3 Replies View RelatedHow to calculate a check digit in excel. The details to calculate this are as follows:
All variables in the calculation are positive integers.
We take each integer of the pro number and multiply it by a value and sum them to get a total.
An Example: 8 Digit Pro Number: 66988757
Pro Number: 6 6 9 8 8 7 5 7
Position in the Pro Number: 1 2 3 4 5 6 7 8
Multiply each digit in the pro number by (10-position) in the number, to achieve a sum.
Using our example pro again:
6*(10-1) + 6*(10-2) + 9*(10-3) + 8*(10-4) + 8*(10-5) + 7*(10-6) + 5*(10-7) + 7*(10-8)
6*9 + 6*8 + 9*7 + 8*6 + 8*5 + 7*4 + 5*3 + 7*2
54+ 48+ 63+48+40+28+15+14 = 310
Take the Sum of the previous calculation and divide it by 11
310/11 = 28
(Actually, it's 28.181818, but since we're working with integers, we truncate everything behind the decimal).
Figure a remainder by multiplying the quotient by 11 and subtracting from the sum.
Remainder = 310 - (28*11) ---> Remainder = 310 - 308 ----> Remainder = 2
Check Digit = 11- Remainder
Check Digit = 11 - 2 ---> Check Digit = 9
Note: if the check digit is 10 or 11, need to subtract 10 from the Check Digit.
I have Put 15 Digit Number 234567890123456 in Cell A1. I am trying to get each Digit Seperately into Single Cell from B1 to P1.
View 5 Replies View Relatedexcel.jpg
What's this all about? And not that there are a few random numbers that are displayed correctly...what's up with the rest?
Attached is the sample file.
Basically I have a number in column A, just wondering is that any faster to allocate the number into individual cell as shown in the attached file.
I have a spreadsheet with a row for a company name, their offer price underneath that, and a 1,2, or 3 underneath that. In a seperate tab I have the offer prices in order of rank with the company name next to the corresponding price using the Index function. I also need to be able to color code the background of the offer price based upon the 1,2 or 3 associated with each name. I am new to the Index stuff so I need some help putting this one together.
View 3 Replies View RelatedI have a column of 6 digit numbers in excel, and I need to remove the last digit from each number, turning it into a 5 digit number. No rounding, just simply remove the last digit. Each number is different. Does anyone know how to quickly and efficiently remove the last digit from each number? I can convert to alphanumeric string if need be...
View 4 Replies View RelatedI need a macro where I can highlight a column and change all of the 2 digit years to a 4 digit year (actually, some of the 2 digit years are only 1 digit, e.g. "9" instead of "09").
I have an if then statement that I can use in the column after it, but I'd rather change the actual numbers in the original column, rather than adding another column (and having to keep the original, too).
The statement I had was:
=if(A1>=50,1900+A1,2000+A1)
I just copy dragged down to get the cell numbers for the rest of the column... but using A1 was just for an example, here, it's not necessarily going to be in that column. It needs to be just whichever cells I select.
It seems like it should be pretty simple, but I don't know how to word it in a macro.
Starting Column Example:
12
13
14
99
11
[Code] ......
For some reason I can't get rid of the borders...
I have an address (city, state, zip format) in a cell. Some of the zip codes only have a 4-digit zip code which is the way the file was received. I know these zip codes have leading zero. How can I convert these to a five-digit code. Examples are as follows:
Waltham MA 2453
convert to 'Waltham MA 02453'
Boston MA 2210
convert to 'Boston MA 02210'
CEDAR GROVE, NJ 7009-1174
convert to 'CEDAR GROVE, NJ 07009-1174'
TEANECK CITY, NJ 7666
convert to 'TEANECK CITY, NJ 07666'
I have 2 digit years (98, 99, 00, 01) that I need to convert to 4 digit years (1998, 1999, 2000, 2001). There is one year per cell. If it was simply a matter of adding 19 or 20 to the beginning of each, I could do that. But since there's a combination of both 19 and 20 that needs to be added and there all intermingled, I'm not sure how to do it.
Can a rule be written to add 19 to the beginning except if the current cell starts with a 0, then add 20? The highest year is 2008 (no 2010 to deal with).
Example:
98 --> 1998
99 --> 1999
00 --> 2000
01 --> 2001
I have a row data corresponding to the measuring of load cell per min and I need to average the values per hour. So I have a column B for the date (from 1-01-2013 to 31-01-2013, column C for the time (0:00:00 to 23:59:00), and D de values per min I want to average. I have to do the same for the rest of the month of 2013 (February, ...., December).
I would like to know if there is a way to create a formula to calculate the average of the first 60 values (to get the average of the first hour of 1-01-2013), and then copy it to get the average of the following 60 (average of the second hour in 1-01-2013) and so on.
If there is no way to do it, I would like to know if I can do it using functions like average, match, index, offset, what would be the best match of those functions.
I also tried it by doing the analysis in another tab and using the function "averageifs" with two criterias: one for the date (example 01-01-2013) and another one for the hour (example 0:00:00), but it didnt work, it show error: #value. I inserted an extra column in the data tab with just the hour (example 0:00:00) in front of the corresponding column with (example 0:01:00, 00:02:00, etc)
Equation I used for this:
=AVERAGEIFS('Data (min)'!D$6:D$43206,'Data (min)'!$A$6:$A$44646,A6,'Data (min)'!$B$6:$B$44646,B6)
=AVERAGEIFS(TAB AND COLUMN WHERE THE RAW DATA IS,RANGE OF CRITERIA 1,CRITERIA 1,RANGE CRITERIA 2,CRITERIA 2)
Is there a way I can stop a range of cells from recalculating once the cells in that range have a certain value?
I'm a complete newbie when it comes to any kind of programming and so...I'd need a little bit of handholding with this.
I got a range of data on sheet2, size changes everyday (dynamic) And in sheet1. I got a range of data and the size changes everyday as well. I need to copy the range in sheet2 to sheet1. The position would be at the cell after the last data in sheet1. e.g.
sheet1 got 105 data
I need to paste data of sheet2 start of row106 in sheet1
How do you remove the last 2 digit
A B
12345688 88
12548963 63
14552365 65
So in column B is would show
88
63
65
Say I have a sets of numbers in column A as below:
5496523
65325555789
I know the formula to select the last number:
=RIGHT(A1,1) gives the answer 3
=RIGHT(A2,1) gives the answer 9
To select the last 2 numbers is:
=RIGHT(A1,2) gives the answer 23
=RIGHT(A2,2) gives the answer 89
My query is to select ONLY the 2nd last digit (being 2 in A1 or 8 in A2).
Is there a way to build a 12 digit calculator in excel?
View 9 Replies View RelatedMy question is, a formula was provided to me that add's a comma and a space after a 15 digit sequence of numbers, that formula is:
=IF(MID(C378,LEN(C378)-1,1)="W",C378&" ,",C378)
And what that does is it would change data in a cell that looks like this
01-02-034-05-W2 TO 02-03-045-06-W2
To this:
01-02-034-05-W2 TO 02-03-045-06-W2 ,
The formula works great, thanks to the help of the posters!
However I just ran into an issue, what if I have a set of data in a cell that looks like this:
01-02-034-05-W2 TO 02-03-045-07-W2
02-02-034-05-W2 TO 02-03-045-07-W2
03-02-034-05-W2 TO 02-03-045-07-W2
And I need a space and a comma at the end of each sequence, so the above would change to this after the formula is applied:
01-02-034-05-W2 TO 02-03-045-07-W2 ,
02-02-034-05-W2 TO 02-03-045-07-W2 ,
03-02-034-05-W2 TO 02-03-045-07-W2 ,
Now the data in the cell is wrapped so it lists one set of numbers, then the next set, then the next set as seen above.
I have column a with 1000 ten digit numbers. I need to remove the
digit in the fourth place from the left side in the entire column. I don't know how .
how you can determine if a cel value is a number or a digit
It is actually for a column to determine if it has a heading or not and acordingly y have to count the rows off that "current region" and put some values with a formula next to this column.
Y was testing an expression with this
msg = IIf(target.End(xlUp).Value = "X", "is this a LETTER", "is this a DIGIT")
I am trying to sort a spreadsheet in descending order of a certain column. I have been able to do so quite easily in the past. However, for some reason, when I am trying to sort it now, it is sorting based only on the first digit of the number in the cell. For example, the order after sorting may end up as 90, 9, 9, 82, 8, 8, 8, 74, etc. I don't know what happened to cause the change, or how to fix it.
View 6 Replies View RelatedWell I want to add few numbers in a few number for example I have ten columns containing few cell numbers and i want to add 92 my country code with it. I have tried this by using replace formula but in result it comes in text format from which i cannot use another formula unless text format is removed and for that i have to do it one by on in every single cell. I have attached a sample sheet.
View 4 Replies View RelatedImagine a cell has a value of "008281" at A1
I want to return the first digit of the 6 digits in A1 which will be "0" in A2.
I tried using the formulae in A2 with "=left(A1,1), it returns "8" instead.
I have a slight problem...I have a range of values..
0113
1240
8430
0903
I need to count the occurance of a a particular no. from 0-9.. So i want to know how many times say 0 appears in that range of values etc so on till 9. I tried using CountIF but the problem i face is lets say in my cell 0903 there are 2 0s inside, it doesnt count this 2 zero..
How can I get one cell to increase by 1 after I change the date in another cell. The spreadsheet is used to keep track of Oxygen Bottles at the local Fire Dept. and I want the " Times Filled" cell to increase by 1 after the " Date Filled" cell is changed. I'm not sure if they key the date in or if they use a calender add-in pop up.
View 5 Replies View RelatedI have many dates in a column in a 6 digit format such as:
950223
950224
950225
These dates are Feb 23, 1995; Feb 24, 1995 etc.
How can I convert these dates in the column to 2/23/1995, 2/24/1995 etc?
I have the following dates in a column and need to convert them to the short date format:
91113 (Sept 11, 2013)
100713 (Oct 07, 2013)
122612 (Dec 26, 2012)
40413 (April 04, 2013)
Those are just some examples. When I convert these as is I get dates that are really far in the future. Some dates are 5 digit and some are 6.
I have column b filled with 17000 plus numbers formatted as text. I need an easy way to delete the first character on the left in each cell provided it is a zero.
View 2 Replies View RelatedI have the following
[Code] .....
AK5 value will be 2 - 21.
I need it to display
A1D05
or
A1D21
or whatever the number is after A1D, but when AK8 = a value of 1 or 2 or 3...... It comes back as A1D1 or A1D2... How ca I keep the two digits in AK8 to stay and put the value the way I want in AE5 ...
