Pull Each Each Digit From Number Into Single Cells
Aug 21, 2008Attached is the sample file.
Basically I have a number in column A, just wondering is that any faster to allocate the number into individual cell as shown in the attached file.
Attached is the sample file.
Basically I have a number in column A, just wondering is that any faster to allocate the number into individual cell as shown in the attached file.
I have Put 15 Digit Number 234567890123456 in Cell A1. I am trying to get each Digit Seperately into Single Cell from B1 to P1.
View 5 Replies View RelatedI know you can take a number from one cell and combine it with number from another cell and make it one number. What I need to do is the reverse. Take a two digit number in a cell and separate it into single digits in two cells. If you have the number 50 in a cell, then is there a formula that will take the 5 and put it in cell and take the 0 and put it in the cell beside it?
View 4 Replies View RelatedI have a column of 6 digit numbers in excel, and I need to remove the last digit from each number, turning it into a 5 digit number. No rounding, just simply remove the last digit. Each number is different. Does anyone know how to quickly and efficiently remove the last digit from each number? I can convert to alphanumeric string if need be...
View 4 Replies View RelatedHow to calculate a check digit in excel. The details to calculate this are as follows:
All variables in the calculation are positive integers.
We take each integer of the pro number and multiply it by a value and sum them to get a total.
An Example: 8 Digit Pro Number: 66988757
Pro Number: 6 6 9 8 8 7 5 7
Position in the Pro Number: 1 2 3 4 5 6 7 8
Multiply each digit in the pro number by (10-position) in the number, to achieve a sum.
Using our example pro again:
6*(10-1) + 6*(10-2) + 9*(10-3) + 8*(10-4) + 8*(10-5) + 7*(10-6) + 5*(10-7) + 7*(10-8)
6*9 + 6*8 + 9*7 + 8*6 + 8*5 + 7*4 + 5*3 + 7*2
54+ 48+ 63+48+40+28+15+14 = 310
Take the Sum of the previous calculation and divide it by 11
310/11 = 28
(Actually, it's 28.181818, but since we're working with integers, we truncate everything behind the decimal).
Figure a remainder by multiplying the quotient by 11 and subtracting from the sum.
Remainder = 310 - (28*11) ---> Remainder = 310 - 308 ----> Remainder = 2
Check Digit = 11- Remainder
Check Digit = 11 - 2 ---> Check Digit = 9
Note: if the check digit is 10 or 11, need to subtract 10 from the Check Digit.
I have a worksheet entitled 'Data'. In this worksheet there is a table consisting of 4 columns plus relevant data:
TABLE 1:
Project
Benefit Type
Delivered or Enabled
Benefit
PJ1
Financial
Delivered
Saving of $4M over 24 months.
[code]....
I have been trying to create a formula that will enable me to pull data from the 'benefit' column(column D) so that the cell contents populate in a single cell in a table in a different worksheet.
TABLE 2:
Financial - Delivered
Financial - Enabled
Tech - Delivered
Tech - Enabled
Green - Delivered
Green - Enabled
[code]....
So, as an example, I am hoping that a formula can be created which pulls the text from relevant cells in column D when criteria from columns A, B and C are met e.g. Tech benefits that are Delivered in PJ2 would populate cell E3 ('Tech -Enabled') in Table 2 with:
Continued maintenance of hardware.
Increased capacity.
code to change all times in a column that are single digit (6:00:00 to 06:00:00) .
View 3 Replies View RelatedI am trying to write a function that will give me the amount of time a certain number shows up in the same digit place in a large set of numbers.
For example:
111112221233313
111212222233323
111312223233333
111412224233343
111512225233353
111612226233363
111712227233373
111812228233383
111912229233393
given the number set how many times does the number 5 show up in the 4th digit. I know its 3 but for the data size I need to run it on, it is impossible to count.
What function would count how many times a certain number shows up in the same spot?
I'm looking for a formula that may automatically convert date into single digit e.g today is Jan 03, 2012 & after adding (1+0+3+2+0+1+2) it will come out 9 ....
View 6 Replies View RelatedFormula to pull the lowest number that falls in Cells I2:L2 and the number must be 0 or Greater. Some of the numbers might be negatives and I am trying not to pull those numbers.
View 3 Replies View RelatedWhat formula or function truncates a text field that is in the following consistent format:
number. name
ie. 3. Super Bella
and 150. Taoist
I wish to truncate the field so I have just the integer without the dot, space or word(s).
Tried Len, Left & Replace but they require a specific number of characters. Since the number can be 1 to 3 digits long, this doesn't work.
I have a column of numbers each have a 0. infront of them (example 0.2346
0.5698). I want to pull the number from the right until it hits the decimal sign. So for the two above the result would be 2346 and 5698
I need creating a tool for numerology.
Every alphabet from a to z has a number associated with it.
A = 1, b 2 , c = 3 etc
Numeric Values for Each Numeral
A1N5
B2O7
C3P8
D4Q1
E5R2
F8S3
G3T4
H5U6
I1V6
J1W6
K2X5
L3Y1
M4Z7
I can either use excel or access or write this.
Example 1 , r = 2 , I = 1, L = 3. .
If I write RIL in column 1 , column 2 should say 213 and column 3 should add 2+1+3 and display 7.
Example 2:
Col 1 = Infosys Ltd
Col 2 should say 1587313 344
Col 3 = 1 + 5 + 8+ 7+ 3+1+3 3+4+4 = 39 , 3+ 9 = 12 , add 1+2 = 3
I have a column that has section numbers like 001.002.006.003.010.011.002.
I would like to divide that single column into seven columns with only the single or double digit in it, ie
1 in a cell
2 in a cell
6 in a cell
3 in a cell
10 in a cell
11 in a cell
2 in a cell
Have been using MID and FIND togther, but when I get to the double digits like 10 an 11 I run into problems.
I've tried everything I know (which isnt that much to be honest. lol). Ive tried the frequency formula but that doesn't work the way I want it - I think its probably the wrong formula to use. I've also tried a pivot table but they always vex me. If a pivot table IS the way to go, could someone talk me through it step by step? (*the wizard is just as confusing as doing it yourself I find) ....
View 9 Replies View RelatedI am looking for a method to conditionally format a variable number of cells below a single cell into which data is entered.
For example ABC = 6, DEF = 12. Therefore, if I enter ABC into D1 then D1:D6 should be conditionally formatted.
I'm doing a termination report at work and I need to create a pie chart based on data in a selected column. Ive never used excel charts before but I cant get the pie chart to display the information that I want.I created a sample workbook. Its very a simple column of data. I would like a pie chart based on the percentages of "yes" to "no". I havent been able to get it to work.
View 6 Replies View RelatedHere’s an example of my data:
A B
1110AAAAAAA
2220BBBBBBBB
3330CCCCCCCC
4330DDDDDDD
5330EEEEEEEEE
6440FFFFFFFFF
7440GGGGGGG
8550HHHHHHH
I need your help to figure out how to merge the above data to look like this in new blank worksheet using a VBA macro:
A B
1110AAAAAAA
2220BBBBBBBB
3330CCCCCCCC
DDDDDDD
EEEEEEEE
4440FFFFFFFFF
GGGGGGG
5550HHHHHHH
I have the following syntax in B1: "1,2,3,5,6". and I need VBA to take the very last number out of that list, and increase by four in single steps. For example: before the code: "1,2,3,5,6" and then after it "1,2,3,5,6,7,8,9." The code must be flexible, though, because it will be running within another Macro, and it must work whether the last number in the list is 1 digit ("...4,5,8"), 2 digit ("...34,35,36") or 3 digit ("...111, 113, 114"). Those three examples would be changed into "...4,5,8, 9, 10, 11" "...34,35,36, 37, 38, 39" "...111, 113, 114, 115, 116, 117".
View 4 Replies View RelatedI have a single cell with 4 values in it all separated by commas and i would like to pull out each one separately. The number of characters in each value changes.
View 9 Replies View RelatedI have the following data :-
SHEET 1
COL A_______COL B________COL C
V1990_______J100_________U1212
H2323_______Y999
U2222
SHEET 2
COL A_______COL B________COL C
U2222
I0000_______U8900________T67888
H2323
I need to search data from range defined A1.C3 and if any data in that range found in the sheet 2 that having the same records.
how you can determine if a cel value is a number or a digit
It is actually for a column to determine if it has a heading or not and acordingly y have to count the rows off that "current region" and put some values with a formula next to this column.
Y was testing an expression with this
msg = IIf(target.End(xlUp).Value = "X", "is this a LETTER", "is this a DIGIT")
Well I want to add few numbers in a few number for example I have ten columns containing few cell numbers and i want to add 92 my country code with it. I have tried this by using replace formula but in result it comes in text format from which i cannot use another formula unless text format is removed and for that i have to do it one by on in every single cell. I have attached a sample sheet.
View 4 Replies View RelatedI have the following dates in a column and need to convert them to the short date format:
91113 (Sept 11, 2013)
100713 (Oct 07, 2013)
122612 (Dec 26, 2012)
40413 (April 04, 2013)
Those are just some examples. When I convert these as is I get dates that are really far in the future. Some dates are 5 digit and some are 6.
I have the following
[Code] .....
AK5 value will be 2 - 21.
I need it to display
A1D05
or
A1D21
or whatever the number is after A1D, but when AK8 = a value of 1 or 2 or 3...... It comes back as A1D1 or A1D2... How ca I keep the two digits in AK8 to stay and put the value the way I want in AE5 ...
I'm trying to figure out how to setup a worksheet to find the most common 2 digit numbers going vertically from the bottom(cold) to the top(hot) it would consist of 90 digits 0 thru 9
it would look like this
4 0 3 9 0 4 3 3 2
9 2 5 6 5 6 9 6 6
8 9 9 3 1 0 2 9 8
1 6 7 5 9 9 8 2 5
2 7 2 2 2 8 5 1 3
0 1 4 7 4 7 6 0 9
3 5 6 4 3 3 0 4 4
7 8 8 1 8 5 7 8 7
5 4 1 8 6 1 1 5 1
6 3 0 0 7 2 4 7 0
each vertical line would be considered weeks 9 thru 1. week 9 would be the first vertical line of digits on the left. it could also contain the most common 2 digits horizontally. Both 2 digit values would be color coded ex. blue equals most common 2 digit horizontally and green equals vertically. I would also like to color code the most common 2 digit value diagonally as long as it is the most common of either the vertical or horizontal 2 digit. Each number is seperate on the worksheet they would not be pairs. im using excell 2003.
The last digit of a number (can be any demonination but always an integer). I know that you can check the last digit of a number with =RIGHT(A1,1) but I would like to check whether the last digit in number is 1,2,3,4,5 and if so change the whole number to a number ending in 5. If the original number ends in 0,9,8,7,6 then I want it to be changed to end in 9. Is this possible and if so is there an excel function that I could use??
e.g. 143 -> 145
e.g. 1037 -> 1039
I have a cell with a number which is a result of several previous sums. It's a number with 8 to 11 digits. For example: 878567663.
I need to add each digit of the number, and then add again the result until I end up with a single digit. In the above example it'd be (8+7+8+5+6+7+6+6+3=56), then (5+6=11), then (1+1=2) and put the end result (2) in a cell
My main doubt is that I don't know how to use a simple "do while" type structure in Excel to achieve the above.
Questions:
1.) How do I create a formula to do that?. I have seen solutions in this board that let me add each digit but that's it... I need to "reduce" it until only one digit is left...
2.) What about if the lenght of the number is not always the same (fe. in one cell is 8, in another is 11, the next one is again 8...)?
I need composing a formula that will add a space after every 4th Number in a 16 digit Character Set.
ex. 0101 0101 0101 0101
="autECLSession.autECLPS.SendKeys """&B4*100&""""
B4 is 3.00% and I need it to be 03 no %, 3.00%*100= 3 but I need anything less then 10 to be two digits still (1-9)
This would be the perfect end result:
autECLSession.autECLPS.SendKeys "03"
and for over 10
autECLSession.autECLPS.SendKeys "10"