How can I get one cell to increase by 1 after I change the date in another cell. The spreadsheet is used to keep track of Oxygen Bottles at the local Fire Dept. and I want the " Times Filled" cell to increase by 1 after the " Date Filled" cell is changed. I'm not sure if they key the date in or if they use a calender add-in pop up.
I know you can take a number from one cell and combine it with number from another cell and make it one number. What I need to do is the reverse. Take a two digit number in a cell and separate it into single digits in two cells. If you have the number 50 in a cell, then is there a formula that will take the 5 and put it in cell and take the 0 and put it in the cell beside it?
I have a test due in the morning, and I really need this question answered ASAP, if anyone could. I need to create an IF formula for this situation: the standard Mhz is 500. Give 55.00 for that standard. But for every increase of of Mhz, give 25.00 per 100 increase.
How to calculate a check digit in excel. The details to calculate this are as follows:
All variables in the calculation are positive integers.
We take each integer of the pro number and multiply it by a value and sum them to get a total.
An Example: 8 Digit Pro Number: 66988757 Pro Number: 6 6 9 8 8 7 5 7 Position in the Pro Number: 1 2 3 4 5 6 7 8 Multiply each digit in the pro number by (10-position) in the number, to achieve a sum.
Using our example pro again: 6*(10-1) + 6*(10-2) + 9*(10-3) + 8*(10-4) + 8*(10-5) + 7*(10-6) + 5*(10-7) + 7*(10-8) 6*9 + 6*8 + 9*7 + 8*6 + 8*5 + 7*4 + 5*3 + 7*2 54+ 48+ 63+48+40+28+15+14 = 310 Take the Sum of the previous calculation and divide it by 11 310/11 = 28
(Actually, it's 28.181818, but since we're working with integers, we truncate everything behind the decimal).
Figure a remainder by multiplying the quotient by 11 and subtracting from the sum. Remainder = 310 - (28*11) ---> Remainder = 310 - 308 ----> Remainder = 2 Check Digit = 11- Remainder Check Digit = 11 - 2 ---> Check Digit = 9 Note: if the check digit is 10 or 11, need to subtract 10 from the Check Digit.
if it is possible to increase one cell by 1 when the date was changed in another cell. I installed the code that was given to me and it worked perfectly, thanks agin JB and royuk, UNTIL the cell that was to increase by 1 was locked and the sheet protected.
I need to increase the cell value on a spreadshhet that contains over 50,000 cells. I know how to do this on a cell by cell basis. I need to know if there is some way of doing this to multiple cells. Here is my example;
$603 $712 $649
I need to increase each cell value and roundup to the next number. I have been doing the following formula: =ROUNDUP(603/.97,0) to increase the cell value to $622.
If a cell is not blank, then increase that amount by a percentage identified in another cell and display the value only without any formalas in a new cell. To this end I wrote this IF statement:
=IF(I2>0,CP9=(CA9*I2/100)+CA9,CP9="")
Observation: I see a FALSE in CS9 where this IF statement exists, however, CP9 does not display the required value.
Is it possible to have a cell increased by 1 and another decreasing by 1 in a simple cell formula.
E.g.: I have an inventory stock sheet that is very simple. I have a maximum stock column C, a stock on hand (available) column A and a stock sold column B.
Every time I sell an item and punch it into column B it should automatically decrease the amount in column A by the number that I punch into B.
I am not concerned about the maximum stock column but would like an easy formula just to work out the amount that I have available so I know when to order more stock.
So when I punch in a 5 on B2 it should decrease the value of A2 to 1. And when I purchase stock again and I punch in say a 5 on A2 it should decrease B2 to a 1.
I have some alphanumeric mixed data which is from 15 digits to 18 digits. In each data there have 5 zeros in the middle. I want to keep all the alphanumeric to 15 digits only. It will delete the zeros not any other value which length is greater than 15 digits. If a length of a character is 17 digit it will delete 2 zeros & if it is 15 digit then keep it constant.
I am trying to get a formula to return the last digit from a number in a cell as a number.
If the cell (B3) contains a number such as 164 or 34 I want to return a value of 4 and have it be formated as a number.
I have tried =RIGHT(B3,1) and it returns a 4 but I cannot get another formula to recognize it as a number. It shows up in the cell on the left side as text would and if I format it as a number nothing happens it is still on the left and the formula does not work.
I'm trying to search a column that has cells with various length strings. Included in the strange (at random locations) could be possibly be a 7 digit number starting with 4. I want a formula that counts the number of cells with contain that 7 digit number. Is this possible?
Image below has a 500 cells I want to delete the 12 digit number but the numbers that align to the 12 digit was in one cell so it is hard to do manually how to delete it
I created a small block of cells on my worksheet where i have in separate cells, the day of the week, the days date and the month. I want to design a special memory calendar for my mom in early stages alzheimers.
There are cells with specific info which i do not want to re type for the whole month/year.
I want to be able to copy all the info into another block of cells and have the day of the week and date change also the month.
I need a formula that can work out a percentage increase or decrease from cell J2 to L2.
J2 is the current data with L2 being the previous data - so the formula would compare J2 with L2 and tell me if there is an increase or decrease shown as a percentage.
The figures fluctuate from month to month so they could be either an increase or decrease. There are over 300 entries so I can't go through each one adjusting the formula accordingly - this is why I need the formula to do the working out if it is up or down.
I have a simple spreadsheet. A value is inserted in cell B4.
I want to increase that value or decrease it by adding a button in the next cells, C4 or D4, to increase and decrease that value instead of manually typing in the new value.
I'm a novice at macros and spreadsheets and a Visual Basic Virgin!!.
I'm trying to work out how to increase a cell (B17) value from 1 through 5 then jump back to 1 and count to 5 again etc etc.
The value should be incremented every time cell B33 ="Yes" however there needs to be a 2nd event which resets the B33 trigger to operate again. This is when cell B34 shows "New Race"
Is there a function in VBA that lets me increment or decrement the number of decimals of a particular cell? let's say i got a cell value of 7.123456 but excel only displays 7 on the cell. What if i want excel to display only 7.123? How can I specify the number of decimals i want on a particular cell (in this case 3)
I have a macro that increase a cell number and one that decreases a cell number, heres my code:
Code: Sub Macro1() Dim t t = Split(Worksheets("Sheet1").Range("d5").Text, "/") t(0) = Format(t(0) + 1, "0") Worksheets("Sheet1").Range("d5") = Join(t, "/")
[Code] .......
So they do exactly what i want them to do but i want to put a limitation on them, so say the number in the cell is 0 then i dont want it to be able to subtract from it anymore, and say the number is 20 i dont want it to be able to add any more, i tried to put if statments into the code but no luck.
i'm looking for a loop macro to perform the following task:
Sheet 2 is my look up table, and sheet 1 as a number of references such as: ='Sheet 2'!B1 ='Sheet 2'!E1 ='Sheet 2'!G1 etc
I need a macro that increases the row references "1" to "2", saves the sheet then increases "2" to "3" and so on until the bottom of the reference table is reached
I don't know if I am asking for something impossible,but is it possible to create a MACRO to automatically add or subtract 10 to whatever number is in the cell? for example:
A1= 20
I would like to have a macro that lets you either add 10 to it to become 30 or subtract 10 to it to become 10.
I have a 49 numbers in cell A1:AW1 they are not in acceding order. I want to separate all groups start from lowest number to highest giving them deferent color. As shown in example table below in cell (A2 start with nš 6 and increase up to nš 47 till cell F2 =yellow color) then Cell (G3 decrease nš 3 and increase up to nš 49 till cell L49=Green Color) and continue same process for rest ....
I have a range (M6:BM6) which consists of week end dates = every Friday (M6 = 5/8/09; BM=5/7/10). I would like to have the range adjusted based on when a cell (B3) is updated. For example, currently B3=5/5/09 and M6=5/8/09 (week end date of B3). If B3 was updated to 5/12, I would like to have the range automatically updated to M6=5/15/09, N6=5/22/09....BM=5/14/10. I could do this with excel formulas in the sheet but would like to macro code adjust the values in the range rather than formulas.
These ranges are used in other macros and works better with values rather than formulas.
I have multiple worksheets (too many, actually!) and each worksheet is a record. I need to enter a Record Number into B5 of each sheet. The Record Number doesn't start at 1. I'd like to enter a number into the first sheet and the rest of the sheets to increase by 1. However, I only need to do this to some sheets.