How to convert number/text to text/number?
example
a=1
b=3
c=5
Let's say
1) column A1 value is "35", any formula/macro can auto convert to "bc" at B1?
2) column A1 value is "ab", any formula/macro can auto convert to "13" at B1?
I have a problem that when I try to convert text to number and format the number without 2 decimal places as seen on the link I have given below, Instead of 1607.947, I get 1607947. I have Excel 2010 loaded. The details are in below picture.
[URL]
Does clipboard method gettext retreive the text from clipboard only, not number? What if numbers are copied (Ctrl C) to clipboard?
View 9 Replies View RelatedI have a combobox embedded into an excel sheet with a linked cell and a range defined in the combobox properties. Every time I change the value in the combobox, the value in the linked cell is stored as text instead of a number.
I have tried copying a cell containing 1 and copying and pasting as special into the linked cell but that only fixes it for the time being. If I change the value in the combobox again, the value in the linked cell is again stored as text. I tried =value() in the linked cell but that again only worked temporarily. Every time I change the value in the combobox, the value in the linked cell is stored as text.
Here how to convert Number to Text..Like 100 means One Hundred.For this any formula is there? i want to change Full A Column numbers to Text..Number To Text.jpg
View 2 Replies View RelatedNeed to convert number to identical quantity of spaces. Example:
A1 is 5
B1 should consist 5 spaces (or other characters).
Converting Number into text I have tried to look for a formula but have not go any
Is there any way to convert them in indian currency format of Lakhs
like Rs 1,50,450 or Rs One lakh fifty thousand four hundred fifty only
I'm trying to write a macro that will convert a number into text but can't hone in on the right coding
here's what I want to do:
a.) I select a cell in my spreadsheet that contains a number, it can be in any format ie: 100, 7.7442, 22.3
b.) I launch the macro
c.) the macro converts the number into text and adds the letter T in the front so the new cell value becomes: T100, T7.7442, T22.3
I have a column formated as text that i need to convert to numbers.
Example: 0.01 (text format) into 0.01 (number format)
I need a formula to copy a number stored as a text to the number.
I have a formula in, let's say on Sheet1, cell A1: =IF($M$3,TEXT(N7,"0%"),TEXT(N7,"0.0%"))
I then copy this cell to another sheet, let's say Sheet2, cell A1 =Sheet1!A1. I have then have a bar chart linked to this cell, but it's reading it as text and no bars are appearing in the chart - even though the cell in the second sheet is formatted as a number!
FYI - my work around is to link my chart to the underlying data in the formula above, in this case, N7. But then I'm not getting the whole number (%) or decimal (%) that I want when the value is displayed in the chart.
I have a column of data that is a weight measurement. Some of the numbers are in lbs while some of the others are in kg. I am looking for a way to convert the kg measurements to lbs, then delete all the text (non-numbers) from the column leaving only the numerical weight values.
Code:
Sub RemovePercentSign_Untested()
Dim LastRow As Long, UnusedCol As Long
Const StartRow As Long = 1
Const ColNum As Long = 3
Application.ScreenUpdating = False
LastRow = Cells(Rows.Count, ColNum).End(xlUp).Row
[Code] ......
I just copied a range of data from a website however these numbers are in TEXT format.
Basically each number in this data set has a SPACE behind. This turn the number into a text itself and i cannot do a sum for this range of data. I tried TRIM function and also tried to format it to number but no luck. Also tried to mutilply the range to 1 yet they're still in text format.
I used =MONTH(A1) to convert a date to its relative month, but it comes out in number format (1 to 12). I want it to read JAN, FEB, MAR, etc.
View 9 Replies View RelatedWondering if there is a simple and concise way to convert a date into text that represents the day number?
So a cell containing “17/09/2006” simply reads as “Seventeenth”, 18/09/2006 becomes “Eighteenth” and so on...
I'm trying to format an Excel 2010 spreadsheet so that I can import it into another application. I need to convert a number to text with four digits and a leading apostrophe - '0000 for example. How do I do this without having to type everything in manually?
View 14 Replies View RelatedI am trying to convert a text imported from CSV file to a number so that I can further elaborate it.
I tried value, trim, clean but without sucess.
Cell values is -10 000,00 what I want to display is 10000.
How can i Do that.
I am attaching a demo file for illustration : Webistexpences.xlsxi
I have a very large exported data base to excel. See the Attachment. I have columns on the left with text that needs to stay as text, and rows at the top with dates. These are my filters to sort and view my data. The current problem I am having is some of the quantities in the bulk of my spreadsheet are coming in as text that need to be converted to numbers (that stupid green triangle in the upper left hand corner). I already have developed a macro to format, sort, extract, and place the data so it's more manageable to look through. I need to get rid of this convert to number error before running this macro.
I am looking to develop a macro that will find each of these "convert text to number" errors and convert the text to number. So far I have been unable to find a starting point.
The sample attached is only 1% of the actual size of the spreadsheet, and my exported data base is variable in size.
The only solution I have at the moment is to go to the bottom of my spreadsheet, find the last error, and highlight everything above and done one convert to number.
Sample.xlsx
The format of the numbers are:
####-##-###-####
I have 2000+ numbers is coloumn B.
There are a lot of sets of numbers that are still text! It's highly annoying and I need to analyze the data in Access.
I tried the paste special advice and the 3 ways microsoft suggests. I have a feeling its not working because of the required format that I need.
I need to do this project tonight!
Background: these are imported numbers, I had to combine other excel databases... By the way, is their an easier way to combine excel sheets into 1?
In column A and B I have text representing an Entity and its Intercompany,
respectively. In column C I have concatenated the two. So now in Column C,
for example, I have "BillTom" in row 1 and "TomBill" in row 900.
I need Excel to convert the text into some sort of code, ASCII or number
that shows they are EQUAL. I need something that shows "TomBill" and
"BillTom" are the same thing, just in a different order.
I cannot build an IF formula or use Find/Replace, as I will have thousands
of these types of combinations.
This is what I have so far.
Code:
Range("L:L").Select
With Selection
Selection.NumberFormat = "General"
.Value = .Value =
.NumberFormat = "0.0"
[Code]...
The .NumberFormat = "0.0" is newly added and doesn't work.
I have a range of numbers stored as text. I need to convert them to long numbers using vba. I tried typing a simple number = clng(a2), but that didnt work. Can someone help me with A) the right formula and B) the proper end(xlUp) format.
View 9 Replies View RelatedI have a sheet that uses all vlookup formulas to populate the cells, and then some basic math calculation are done in seperate columns with the results. The problem is, even though the rest of sheet works fine one column is being read as text. I've tried many things to get Excel to read the column as numbers but nothing is working. So far I've tried everything I've found in Ozgrid (Paste special using add and multiply, using a working column)and the simple formatting things built into Excel, but nothing is working. All I need is for the column to be read as a number.
View 9 Replies View Relatedi wanna convert the decimal number to a round number...like 2.0L to 2L.
View 6 Replies View RelatedI have a pivot table & want use the following to convert the cell from number to text under the Format Cell -> Custom. If I just type in [=1]"COA Denied";[=2]"Deferred to Future Class"; .... it works
However, I add more condition after , it won't work
[=1]"COA Denied";[=2]"Deferred to Future Class";[=3]"Offer Accepted - Confirmed";[=4]"Offer Declined";[=5]"Offer Waitlist Position";[=6]"Student Withdrawal Post Interview";[=7]"Waitlist Declined";
I have created an online survey, and people choose ten words (skills) out of 24 possible. Please see screenshot. I would like a formula that does this in layman's terms: "If I see the word "Cooperation" in the source cell, then I'll put "03b" into the target cell; but if I see "Managing" in the source cell instead, I'll put "21a" in the target cell, etc."
I've tried a few IF / Then statements, with no success. Screenshot shows the source cell upper right, and the ten target cells below left with two rows of sample results. I'm guessing the same formula can be in each of the 10 target cells.
There is probably a really easy answer to this question but I cannot seem to figure it out. I need to calculate the sum of pages faxed on a fax report at my office on an excel spreadsheet which is downloaded from our server. It appears the file is not meant to be used in excel but it downloads as an "*.xls" file anyway. When I open the file I receive this message:
"The file you are trying to open, 'FaxCetailReport.xls', is in a different format then specified by the file extension. Verify that the file is not corrupted and is from a trusted source before opening the file. Do you want to open the file now?"
The file is comnig from a trusted source so I select "Yes" and it opens just fine. There are just over 50 rows of info, one of them being the number of pages. In a blank cell I enter "=SUM(select rows)" and the result is a "0". I have converted the cells to the "number" format, no change. When I right click on the cells and select format, the protection tab on the right has the check box "Locked" checked and unchecking it does nothing, it is checked as soon as you go back in to the protection tab.
The only way around this is to manually retype the numbers in a cell next to the pages column, which is ok for 50 numbers, but I have some sheets where there is over 1,000 entries.
I want to use a formula, in another cell, to convert ā€ˇ"Friday, ā€ˇ30 ā€ˇMay ā€ˇ2014, ā€¸ā€ˇ3:47:16 PM" to a value. I am using Excel 2003.
View 2 Replies View RelatedIs it possible to do the following with a formula in Excel...
I have a list of users with the dates they first logged into a system and the date they last logged in. I'm trying to group them together into segments so I can analyse them using a Pivot table and chart to see how often different groups are using the system, e.g. New customers in December, November, October, etc.
The trouble I am having is trying to convert the different human-readable text strings into a consistent number of weeks from today's date, e.g.
USER FIRST LOGGED IN LAST LOGGED IN
user 1 2 years 20 weeks 54 sec ago
user 2 44 min 7 sec 1 min 37 sec ago
user 3 49 weeks 2 days 17 min 3 sec ago
user 4 5 weeks 2 days 33 min 32 sec ago
user 5 38 min 9 sec 38 min 9 sec ago
user 6 5 weeks 3 days 1 hour 7 min ago
user 7 2 hours 17 min 2 hours 11 min ago
user 8 45 seconds ago 45 seconds ago
Is there a formula I can use to convert these human readble text strings into a number of weeks elapsed since today's date?
I want to convert number format to text format, any formula ?
View 6 Replies View Relatedhow to convert a number in one cell to text in another cell
View 9 Replies View Related