I am trying to convert a text imported from CSV file to a number so that I can further elaborate it.
I tried value, trim, clean but without sucess.
Cell values is -10 000,00 what I want to display is 10000.
How can i Do that.
I am attaching a demo file for illustration : Webistexpences.xlsxi
I have a file with four sheets – File1, File2, Association and LookList. File1&2 are totalled, as is Association sheet but then are checked against each other using the totals. What I need to do is the following (but I am not sure how to do it using macro…)
Step 1 - ‘File1’ Sheet – It all comes in text format. Firstly, convert all of column B=>used range (it may vary to 40k records!) into numbers and total each column.
(I know the principal behind it – have a total variable for ColB, loop through and when it finds >0 then increment buy one and output under the last cell in that column – but I do not know the macro code)
Step 2 - ‘File2’ Sheet – Again, it's in text format. Firstly, convert all of column B=>used range into numbers and total each column(would contain same amount of records
as Step1!) .
Step 3 - ‘Association’ – same steps as for File 1 (again – same number of records).
Step 4 - THEN (and I have NO IDEA how to do this!...) I need to check the File1 & File2 against Association using the lookup and return the Serial number and the Association heading that does not match on a fourth sheet.
The problem is that – for example – Field-1 consists total of more than one column – contains 3 but could contain a total of up to 6 columns! - I understand excel formula ‘vlookup’ but am not sure how to do it when it is a combination of columns and even less when applying it to this! – In fact, for a macro I am not even sure what column format the lookup list should be!
Following is the master data that's imported from weekly timesheet.
DeptProjNoProjNameEmployee
Dept170000Project1Shawn Johnson
Dept170000Project1Brenda Larry
Dept260010Project2Patrick Leh
Dept170010Project3Shawn Johnson
When imported, the 'ProjNo' is stored in Text format. Now when forecast data is appended to master table, the ProjNo stores as Numbers. I would like to know how I can automatically convert it into Text. The number of records varies every time when imported from the Timesheet.
The other thing is I need AutoFill 'APPROVED' in Column 5 from 2nd row to the last row.
I have a document passed to me that includes information pulled from an internal system.
I want to use some basic formulas to show Totals, averages etc.
However, the SUM function does not work on the data provided unless I select the cell (As if to edit the text) and the press enter.
Is there a quicker way of selecting all of the cells in Column A for example and performing this function on mass, rather than selecting each cell individually.
I have attahced a similar sample copy - My SUM formula is show in cell B15.
I have attached two files, one the sample txt file imported to excel but the top area is highlighed with some notes and section break. RED deleted don't need amd un highlighted is actual data. The other file is what I would like to see the data look like after parse.
View 5 Replies View RelatedI need to clean out unnecessary data from a file, (see attached text file), I'm not sure how to go about this in excel. basically every file starts with 9 cells that needs to be deleted, two cells of real data then one with garbage that needs to be deleted, it goes like that for 40 cells, then again 10 cells of garbage that needs to be deleted, then 40 of real data and goes like that up to 3000 lines, I know it sounds confusing but if you take a look at attached file, at the end I need to have
all cells full of data
I need to bring in 2600 student names from a cvs file and have it formatted to an Excel workbook.
When it imports into the Excel file I need it to populate the proper boxes, such as:
StudentLastName
StudentFirstName
StudentID
GradeLevel
TeacherName
TeacherID
RoomNumber
I have the CVS attached. Hope I can get this done. As you can see it shows the teacher's name with their first initial, their teacher number that they are identified by and their room number. I need the student ID as well but not the phone number and the days of the week. This would save a lot of work.
I have a very large spreadsheet that comes out of SAP and it brings out the majority of cell entries as text ie putting a ' at the begining of any number. the problem that i have is with the cells that have a date in them ie '19/04/07. I have tried varioous methods to remove this and turn the cells into date format but to no avail.
Also i do not get the option to convert text to number
I want macro which export each excel column to new text file. The data in excel file is number. The column has only 5 rows that means each new text file should contain five lines of one column. It looks simple but couldn't manage to do macro for it. I have very big data set in one excel file, and have to be splitted into text files. The file name in new text files can be any kind as long as it can be in some sort of order for each export.
View 2 Replies View RelatedI import date information in text format and need to add to the date. My date info in in column "J" and in Column "K" I would desire to write a formula that allows me to to the following. My data looks like this in text: yyyymmdd
I desire to look in column "E" and I have 3 different variables. "J", "K", "L".
If column "E" has a j add 30 to the years; K add 35 years and L add 38 years.
for Example: 19630923 j = 19930923 k = 19980923 L = 20010923
how to word it but if someone understands then please help. I have two excel data files namely Book1.xls & Book2.xls. Both files have different data in it. Both files contain macros. When these macros run the files become **FINALIZED** version.
Originally, I get the above files in my email as txt. attachments. I then move these two txt files to my desktop in a folder called Folder-1. Then I open these files as an Excel and save them.
Basically, I need to know if two txt files are sitting in a folder-1 on my desktop. What can I do or what can I clik that....those two text files get converted into excel automatically, including running that macro I talked about in the above paragrah.
To put it differently, if I have two txt files Book1.txt, Book2.txt in a folder, how can I automatically create an excel **FINALIZED**version which sits right next to their txt version.
I have a problem that when I try to convert text to number and format the number without 2 decimal places as seen on the link I have given below, Instead of 1607.947, I get 1607947. I have Excel 2010 loaded. The details are in below picture.
[URL]
Does clipboard method gettext retreive the text from clipboard only, not number? What if numbers are copied (Ctrl C) to clipboard?
View 9 Replies View RelatedI have a .txt file which i need to convert using text to columns in excel, obviously this is simple, however my .txt file is 325000+ rows of data
Is there anyway I can Excel can cope with this amount of data, I know that my row limitation is 65536, can i spread the data across multiple sheet tabs?
to convert Excel file to Text (txt) file using VBA code.
I have data in range A3:C10 of Excel Spreadsheet and I need VBA code to read then write this data into text file and save as .txt file
I want to convert the excel file into text document with out changing it
file type
for example
in the wordpad i have the text document in this type
"Candy","1253563"
I want this to be open in excel and i can open in the excel using delimited option but i want only to change the number "1253563" and i can use autoofilter to filter and i want to change the number "1253693" in the excel and i want that excel should open in the format of text document without any change as i mentioned before
it should open in this format
"Candy","1253693" only the number should change and this action is repeated for many numbers
I'm importing a file into Excel which I need to format into something I can then use to build reports from.
At present the imported file looks like this: ...
Is there a property that contains the name of an XML file a user has imported into Excel? If not is there any way I can retrieve the name of the file?
View 4 Replies View RelatedI have a combobox embedded into an excel sheet with a linked cell and a range defined in the combobox properties. Every time I change the value in the combobox, the value in the linked cell is stored as text instead of a number.
I have tried copying a cell containing 1 and copying and pasting as special into the linked cell but that only fixes it for the time being. If I change the value in the combobox again, the value in the linked cell is again stored as text. I tried =value() in the linked cell but that again only worked temporarily. Every time I change the value in the combobox, the value in the linked cell is stored as text.
Here how to convert Number to Text..Like 100 means One Hundred.For this any formula is there? i want to change Full A Column numbers to Text..Number To Text.jpg
View 2 Replies View RelatedNeed to convert number to identical quantity of spaces. Example:
A1 is 5
B1 should consist 5 spaces (or other characters).
Converting Number into text I have tried to look for a formula but have not go any
Is there any way to convert them in indian currency format of Lakhs
like Rs 1,50,450 or Rs One lakh fifty thousand four hundred fifty only
I'm trying to write a macro that will convert a number into text but can't hone in on the right coding
here's what I want to do:
a.) I select a cell in my spreadsheet that contains a number, it can be in any format ie: 100, 7.7442, 22.3
b.) I launch the macro
c.) the macro converts the number into text and adds the letter T in the front so the new cell value becomes: T100, T7.7442, T22.3
I have a column formated as text that i need to convert to numbers.
Example: 0.01 (text format) into 0.01 (number format)
I am very new to VBA and have found a task out of my programming abilities using VBA.
I need code that will take a text file that begins as this shown in textfile.jpg
and ends up like the following attached picture of the results spreadsheet group.jpg
I'm working on a sheet to analyse data in .CSV format, sofar I can import the .CSV file correctly, however I would like the Macro to name the sheet with same name as the .CSV file.
As i'll be importing multiple .CSV files.
The code I have sofar is:
How can I get from this:
Random Item name;random_nickname Final price: EUR 1.00 (Fixed price)
this:
EUR 1.00
I need a formula to copy a number stored as a text to the number.
I have a formula in, let's say on Sheet1, cell A1: =IF($M$3,TEXT(N7,"0%"),TEXT(N7,"0.0%"))
I then copy this cell to another sheet, let's say Sheet2, cell A1 =Sheet1!A1. I have then have a bar chart linked to this cell, but it's reading it as text and no bars are appearing in the chart - even though the cell in the second sheet is formatted as a number!
FYI - my work around is to link my chart to the underlying data in the formula above, in this case, N7. But then I'm not getting the whole number (%) or decimal (%) that I want when the value is displayed in the chart.
How to convert number/text to text/number?
example
a=1
b=3
c=5
Let's say
1) column A1 value is "35", any formula/macro can auto convert to "bc" at B1?
2) column A1 value is "ab", any formula/macro can auto convert to "13" at B1?
I have a column of data that is a weight measurement. Some of the numbers are in lbs while some of the others are in kg. I am looking for a way to convert the kg measurements to lbs, then delete all the text (non-numbers) from the column leaving only the numerical weight values.
Code:
Sub RemovePercentSign_Untested()
Dim LastRow As Long, UnusedCol As Long
Const StartRow As Long = 1
Const ColNum As Long = 3
Application.ScreenUpdating = False
LastRow = Cells(Rows.Count, ColNum).End(xlUp).Row
[Code] ......