Is there an easy way to auto return to column A but of next row. I would like to be able to do this automatically say when column 87 is reached. I could just arrow down and hit home but there must be a way to automate this. I am currently in 2003 but will be moving to 2007 in a few months.
View 4 Repliesi have a work book of 12 sheets, the two main sheets 1+2 have 5000+ rows. by 30 columns. each row column b is a site number in ascending order(up to 4 for each site) so auto filter select = to site 5 about 10 seconds later i get the result of 3 sites try site 846 30 odd seconds later up pops the result. so i copied the sheet to a new work book and tried and it's nigh on instantaneous. next step
copied sheet paste special values into new sheet in same original workbook
and tried filter on that still slow as ever, thing is this book around 8meg and i cant for the life of me work out why ive cleared excessive formats and reset last cell on each sheet. there is a vlookup from sheet 1 to 2 for each site to return serial numbers. i have tried it in vba by turning autocal off/on but still no difference.
I have tried and tried to get the VBA code working that will tell me the number of visible rows in an autofiltered set of data, but the result I seem to be getting is always "1". Below is the most simple form of the code that I am using (it is based on previous posts and tutorials on this site). (I have also attached a workbook with sample data and the code)
With ActiveSheet
Set rnData = .UsedRange
With rnData
. AutoFilter Field:=1, Criteria1:="5"
.Select 'demonstrate that the rnData range is valid
lcount = .SpecialCells(xlCellTypeVisible).Rows.Count
End With
End With
How to return address of the column or cell I selected from Application.Inputbox, not just return the value?
[Code] ....
I've been searching the forums for this problem but I can't seem to find any answers. Anyway, this is the problem. See screenshot.
I want to compare A1 for the values in column B, then return the corresponding cell (column C) in column D.
e.g. D1 = 2, D2 = 1, D3 = 4, D4 = 5 and D5 = 3.
I have a worksheet with various data autofiltered. I know when I filter on one of the fields, the drop down arrow becomes blue. If I filter on one or more fields, finding which fields I have autofiltered can become hard to find.
This is my question -- Can I put a button or some type of one touch command were I can take those autofilters off and return the worksheet backs to its original state before I autofiltered?
I have a list that is streets and addresses. All contained in column A. Cell A1 is the street name and then Column A3 is the street number. This repeats down column A for almost 1000 street names. I need to fill column B3 with the street name, as well as B4, B5, B6, etc until the street name changes. I was trying to do this with an if..then but couldn't get it to work. I also tried to work on a do.. loop looking for the change from a string to number. But my programming is a little rusty. If anyone can help I was be forever grateful. I mean the alternative is to sit here and copy and paste all day.
ABBEY CT
1700
1700
1703
1703
ABERDEEN LN
1305
1313
1321
1321
I am trying to use a nested INDEX and MATCH array formula to return the value in column C when matching column A and column B, but with a few more criteria.
The range containing all the data
A
B
C
1
Cat 1
January 1, 2014
John
[Code] ..........
I am looking for the array formula to return the name of the person in column C who is in Cat 1 after the date in column B.
For example;
C7 should return "John" because B7 requests "January 15, 2014", which is after the value in B1
C8 should return "John" because B8 requests "February 15, 2014", which is after the value in B1
C9 should return "Andrew" because B9 requests "August 15, 2014", which is after the value in B4
The best try I had for the formula in C7 was
{(INDEX($A$1:$C$4,MATCH(1,($B$1:$B$4>=B7)*(A$1:$A$4=A7),0),3))}
This brings back "John" as desired in C7, but when copying down the table into C8 and C9 both C8 and C9 return Andrew.
I guess this is due to my ">=" condition in the Match formula and it is returning "Andrew" because "Andrew" is also after the date requested, but I cannot for the life of me work out how to get it to work.
I have a spreadsheet of several thousand named items (in column B) with values associated with them in column A). The "name" field is a string of several alternative names for the item.
I have a list of ~50 items that I am trying to find the values for. Each uses one of the alternate names.
What I want is a function that will return the associated value in column A when one of my shortlist names is found.
For example, my big spreadsheet looks like:
AB
1dallas, DFW. 12345
2Atlanta, ATL, 23456
3Boston, BOS, 34567
4Chicago, CHI, 45678
5Los Angles, LA, LAX, 56789
And my list looks like
Atlanta
CHI
I want the output to look something like:
Atlanta2
CHI 4
Is the feasible? IT seems like there should be a way to do it....
I have the following sample data set and I'm trying to return the appropriate column header based on criteria (i.e. DDD) and a number value which will be somewhere within the range of the table. In example below, the value returned should be Header 2 because the value is greater than those in Header 1 column (range H9 to L26).
Here's data table:
CriteriaHeader 1Header 2Header 3Header 4
ZZZ5.0015.0050.00130.00
ZZ5.0015.0050.00130.00
Z5.0015.0050.00130.00
YYY5.0015.0050.00130.00
YY5.0015.0050.00130.00
Y5.0015.0050.00130.00
DDD5.0015.0050.00130.00
DD5.0015.0025.0075.00
D5.0015.0020.0065.00
RRR5.0015.0015.0045.00
RR2.5010.0010.0030.00
R1.503.0010.0025.00
UUU0.751.505.0020.00
UU0.751.505.0020.00
U0.751.505.0020.00
P0.751.505.0020.00
T0.100.105.0018.00
CriteriaNumberValue
DDD10.00Header 1>>>=INDEX($I$9:$L$9,MATCH(I29,INDEX($I$10:$L$26,MATCH(H29,$H$10:$H$26),)))
I have a tab that has 2 columns of data and I want to be able to return a value in column A if my data matches column B. If column B has the text TRUETRUE, I want to bring back the corresponding data in Column A. How do I return all the data in Column A for all the TRUETRUEs in column B? I can only get the first instance of TRUETRUE.
View 4 Replies View RelatedI'm creating a macro that creates a co-ocurrence matrix from variables that are adjacent to each other.
In order to proceed, I need to know how to return the column number of the first (leftmost) column in a range that the user selects.
I have an array 20 Rows x 42 Columns, which contains a competition draw.
I need to search this array for a unique value and return whatever the time is in the first column on the same row as the value appears, and enter it into column C in the Womens Times sheet.
I also want to return into column D the court number from row 3.
The reason i want this automated is as teams enter / withdraw we may need to drag the games from court to court to fill gaps, so i want the Womens Times sheet to update accordingly.
I have been messing around with index and match, but cannot quite get it to return what i need.
I have attached an example ... on the sheet "Womens Times" in column A there is a list of game numbers ( #1W etc etc) indicating womens game #1 and so on. The main sheet i am using also has a seperate tab for the mens games, hence the designator of W or M on the end of the game number.
I need the searchable list box to return data one column to the right of the "searched" column data.
This works mostly with Data Validation.
Named range "validationlist" with "=OFFSET(Choice!$AC$4,,,COUNTIF(Choice!$AC$4:$AC$14,"?*"))"
D9 has a drop down control. Enter the cell and type "br" and click the drop down arrow. Mouse to choose an item from the list box. If you chose "brown" , it will be entered in the cell. The returned item should be "banana" from the other column. How to do this?
Once working the control needs to be used across the row in more cells: E9, F9... all the way out to W9. And there has will be a Lookup to pull data from elsewhere above D9.
This worksheet ultimately needs to be uploaded to Skydrive and used as a collaborative worksheet as a 'web app'.
See attachment and formula output below.
[Code]............
searchableListBox-EF1.xlsx‎
I am trying to get a formula that will search one column range “B” and pull data from another, “D”. Dates are down column “B” and some of those dates are repeated several times. In column “D” there is only one piece of data (a number) entered for each day. Eg, if 08/06/2009 has been entered 3 times in column “A”, there will only be data entered in 1 of the cells of column “D” and blank cells in the other 2.
Column B -- Column D
07/06/09 -- 54000
08/06/09
08/06/09 -- 62000
08/06/09
09/06/09 -- 61000
I couldn’t get the LOOKUP function to work properly, as there are duplicate dates in column “B” and I often got a result of 0 returned.
As I’ve only got 1 piece of data added in column “D” per day and any duplicate days would just have blank cells in “D”, I can actually get a SUMIF function to work, SUMIF(B3:B60,DATE(2009,6,8),D3:D60). Although it does work, it doesn’t feel right using it and I would prefer a formula that would return just the one cell, instead of the sum of a range of cells.
I want to get value from reference one column and return value by corresponding row from another column. This can be done by vlookup column. But it find value from 1st column and return value from given relative column. That mean find from Left column and return value from right side given column number.
But I want find from Given column number and return value from given left column. For Further detail see the Attached file.
I need a formula to return column header if there is data in the column, any data.But I also need to return the second, third, fourth header with data too
In column A row 2, I have =IF(M8"",$M$1,IF(N8"",$N$1,IF(O8"",$O$1,IF(P8"",$P$1,IF(Q8"",$Q$1,IF(R8"",$R$1,IF(S8"",$S$1,IF(T8"",$T$1,""))))))))
This returns the row 1 header for the first instance of data in row 2 columns M thru T But in B2, I need the second header with data in the column.
I need the results in yellow (1st, 2nd, 3rd, 4th) from the array to it's left
1St match2nd 3rd 4thColumn MColumn NColumn OColumn PColumn QColumn R
Column MColumn PColumn QData data2Data3
Column NColumn OColumn PColumn R Data Data2 data3 data4
Would use match/index but can't increment it to the second or 3rd match
I'm working on a project in which I have 50 states + DC listed by 2-letter abbreviation, and want to return a value in another column that will be a non-unique number (some will duplicate in the second column.)
Also need to do this same operation with first column (state) and third column, which also is comprised of non-unique numbers.
Hlookup, lookup & pivot tables seem to not be a fit for this.
=IF(ISNUMBER(VLOOKUP($E8,Su!$D:$K,7,FALSE)),VLOOKUP($E8,Su!$D:$K,7,FALSE),)*$I8
In the first vlookup it picks up a value. I need to do the same vlookup function but it should also pick up another value in column 9 and should add value in column 7 and 9 and return it. Employee id numbers are in column E in the first page.My formula checks for the employee id in Su sheet and retrieves the value from the seventh column. I need to retrieve also from 9 th column and add them together.
I have two excel files.
File #1 is a varying length and has 4 columns with ID #s in Column A.
File #2 is a two column file that contains a list of ID #s in column A AND modified ID#s in column B.
I need to match the ID #s in column A from file# 1 to the list in column A of file#2 then replace ALL instances of the matching ID #s in column A of file#1, with the values found in column B of file #2.
I've tried using the substitute function but I could only replace one found ID at a time.
In the first sheet I have two columns, one for the product_id and one for the name of the product. So the Sheet1 is like a small database. The second sheet is for the orders.What I want is when I type the product id in the A column of the orders sheet(Sheet2) to auto insert the product name in the B column so i dont have to write it every time.
View 2 Replies View RelatedI want to look up a value in the third column of a table and return the value in the first column of that row on the same table. What do I do?
View 2 Replies View RelatedI'm looking for a formula that will return the column header (a date) of the first instance of a number greater than 0. For example if columns A through S had dates as in row 1 (header row), and in row 2, every column contained a 0 up until column P, I would want the date (Row 1, Column P) returned? I think this might be a sort of index/match formula, but I am not very familiar with these.
View 3 Replies View Relatedhow to find text from a row in column, where is a lot of text and return row number, of located text?
View 15 Replies View RelatedI have a column containing text values eg M1, T2, M3, A4 etc. and I am trying to return the value (numeric) in a second column to a cell when the text value in the first column is matched.
View 4 Replies View Relatedi tried to search on forum abou unique function but i didnt find what i need. I have 2 columns - column A - is "ID" and column B is "name". I want results in column C. I need formula, which look at ID and give me in C in the same row the unique „name“ from B. If is the name by this ID first time in column, it return the name. If it second or more, it return blank.
View 5 Replies View RelatedI have are two worksheets, "Sheet 1" which is a bill of lading form and "Sheet 2," in which columns A and B contain Part Numbers and Weights respectively.
What I'm wanting to have happen is when a user inputs a part number into Sheet 1 (say in cell B6), it calls a UDF that looks up the part number on sheet two column A and returns the corresponding weight from column B (to say cell C6 on sheet 1).
I have an excel sheet I am working on and in columns F1:F2000 I have an IF statment, I need to be able to add more "IF"s to it but I will exceed the 1024 char limit. Is there a way I can put this formula into VB as a function called DocumentType() and then in excel F1:F2000 =DocumentType()?
Is it as simple as:
Function DocumentType()
If(...........)
End Function
I know the column number (57) and want the formula to return the column name (BE) Auto Merged Post Until 24 Hrs Passes;not using vba that is! or if so , a custom function so macros dont have to be run.
View 3 Replies View RelatedIs it possible for a column of "sums" to auto sort from largest to smallest? I have a dashboard with 20 charts and I want them to show in the order of largest to smallest but its rolling data so it changes daily.
View 6 Replies View Related