I have sales figures from each region and need to convert those to percentage. and then when i try to add up those percentage shown on screen in excel, sometimes they will add up to 100.1% or 99.9%. Then i will have to manualy adjust the one that excel didn't round up but larger comparable to other regions in the 2 dp.
View 13 Replies
I don't know if there is a setting I'm missing or I'm going mad but when I use the round function in VBA it doesn't round.
I am using Excel 2000. See the example attached.
In the cell A2 I have a value 0.525, cell B2 has a formula "=round(A2,2)" which = 0.53, but cell C2 is assigned via VBA ie
Sheet1.Cells(2, 3).Value = Round(Sheet1.Cells(2, 1).Value, 2)
and the result is 0.52??
I have the following code:
[Code] ....
When I run the macro, some columns are already hidden. The macro doesn't seem to autosize cells correctly. For instance, one cell in a row appears to have some contents hidden (or below the reading area of the cell). In other instances, the rows are auto-size to huge heights and widths.
Using vba how to round off the value e.g.: The number 582.356894 has to be rounded off to 582.4 ....
View 1 Replies View Relatedi have a list of minutes in cells a1-a5 say 123 256 147 158 235 divided by 60 giving a total of 15.3 hours. i want the hours to round up if over the. 5 mark or round down if under .5 how would i get the desired result?
View 2 Replies View RelatedA cell value is calculated via a formula in vba. I want to round the result down to the nearest odd number or down to the nearest even number, depending on conditions in an other cell. The result is already an integer.
View 8 Replies View RelatedTried the code below to change figures from countless decimal figures to two, however excel is not having any of it,
Range("d:o").Select
Application.WorksheetFunction.RoundDown (2)
I need the tabs of a project action log to auto-populate and auto-delete in a master log. (So when something is added or deleted in a tab it is added or deleted on the master) I use excel a little bit for work and personal finance purposes but I have zero experience with macros or VBA.
View 1 Replies View RelatedMaking a mission tracker that requires less upkeep than my units previous methods. I am using Excel 2007 and have some things in mind that I would like it to do.
On the down side, I have only basic experience with excel and have never used macros or VBA.
Even if what I am after could be solved with functions (which I prefer), I simply do not quite know how to make what I want without assistance. Ok, now on to the description.
The mission tracker aside from showing a list of the missions we have done during our program, it needs to also generate metrics automatically. In my worksheet, I am using columns A-G and rows 1-501.
The mission scheduling type in Column E are listed below. The letters on the left are what I am using in the sheet, the part to the right is what it really means:
Column D has the day of the week listed as: Mon, Tues, Wed, Thurs, Fri, Sat, Sun.
now the metrics I need to be generated are the number of different types of each mission compared, how many of each type of mission was flown per day of the week, how many of each type of mission was flown per month.
Basically what I need is a way to automatically count the number of rows that meet a specific criteria throughout the range. This would require being able to check the value/text of multiple cells at a time and count the number of rows that meet that criteria.
[SOLVED] 1. The first part would be to have the worksheet be able to count the number of each type of the 9 mission scheduling codes throughout the range. I would be storing the count in new cells that would then be connected to pie charts.
[SOLVED] 2. The second part would be to count the number of each type of mission that was flown per day of the week. That would require searching both mission type and day of the week. All I would need is a working formula for 1 set, then I could switch mission codes and weekdays to match all the 63 possible outcomes.
3. Knowing the number of each type of mission flown per month. This would be checking the date and the mission type. The trickier part that comes up in my mind is that our programs span multiple calendar years, so it would have to track it by month and year, that way there is a difference between Jan 2009 and Jan 2010. The counted numbers would be used to make histograms. It would be nice if the chart titles could be automatic based on the dates inputed in the mission tracker. If I needed to choose a maximum time length for it to cover, I would pick 3 years.
4. I would like to figure out how to make an inputted line of data on the main tracker sheet to create a copy in the corresponding worksheets based on schedule type, that way a person could look at/print a specific type without having to sort the main list.
The actual goal is to make it where a person can enter the 1 line of data per mission (cells A-G) and the mission metrics update automatically after each mission is inputed allowing upper level supervision to have current information quickly whenever it is needed. Currently we need about a weeks lead time to get the information asked for on our current progress.
Why is Excel not rounding up a percentage of 93.5 to 94?
View 6 Replies View Relatedrounding the numbers. I am working on a quote in which quantity is arrived by dividing the sell price by Total sell price. The condition is the result (quantity) should always be a whole number, I can achieve that by cell formatting but when the calculation is done using handheld calculator the results are different.
I need the result to be same if using excel or handheld device i.e quantity in whole number.
Hi, I have this issue:
1.67 -> DISPLAY 2 ROUNDED
1.67 + 1.67 = DISPLAY 3 ROUNDED
but I would like to know how to sum 1.67 as 2
WANTED -> SUM 2 AS A NUMBER AND NOT A ROUNDED
2+2 = 4
I've been trying various combinations, but currently no joy
I need to work out how long the batten has to be so the roof sheets fit evenly, the measurement has to start from 1460mm and go up in increments of 80mm eg 1540mm, 1620mm, 1700mm and so on.
But the number has be closest increment of 80mm over the shed width if this makes sense, the size of the battens for 2400 width shed would be 2420mm but i need this to work out for any width shed not just 2400.
I am using the rounding function in excel and its rounding to the 10's, is there a way to round to the nearest 5?
View 4 Replies View Relatedi want a cell to round itself. i have a form i'm filling out, based on a percentage of a dollar amount. when the formula calculates, it only shows the first 2 numbers past the dollar point. however, the cell still "knows" what the number is. I have several of these formulas on a spreadsheet, and the sum of them at the bottom of the page is NOT what would you would get adding up the numbers you see on the page, as it is calculating numbers you can't see.
View 5 Replies View RelatedI am trying to do is have the roundup formula round up the result of a more complex formula BUT do it all inside of the same cell? The formula I have is in cell A1 and currently I have to have the cell that contains the round up formula (in cell A2) and have it reference A1. The complex formula is =((280283.47/798186.89)*(700*20*4)) and the result is -19,664.41 which I want to round up to $20,000. Is there a way to make this all occur in just cell A2 or am I stretching it?
View 4 Replies View RelatedI have a number say:
156.9679628 then I go to format to change it to 2 decimal then it would show
156.97 and then I c&p that ... I still get 156.96796284 how do i just get
156.97
I'm creating a spreadsheet to calculate materials with the following columns Cost/10% of Cost/Customer Cost/Qty/Total cost.
I understand that whilst showing rounded to 2 decimal places excel stores more than this in the cell. which then throws out the Total cost by a few pence.
My research leads me to believe I need to use the ROUND function but I'm unsure which cell to use it or how.
round to two numbers. i have this formula
View 3 Replies View RelatedHow do I take a date value and round it off to a fixed month and day of the year following the year entered.
Ex: In cell A1 I have a date: 12/28/2009
I want to round off the date to January 1 of the next year. So I need a function that would return 01/01/2010 (jan 1 2010).
How do I get Excel to round up all values from .3 onwards. EG 2.36 to 3 and 2.29 to 2?
View 4 Replies View Related19.25581
1.01346
3.29376
0.25337
0.25337
1.26683
Total: 25.33660
If I use the Decrease Decimal on the total 25.33660, it becomes 25.34. How do I round all the sub numbers so that 25.34 is achieved.
I have a spread sheet with col's that I want to average their totals, but would like them to be rounded up or down.
View 3 Replies View RelatedI have this formula which works well, but the 3-len part needs to be
dependent on another cells content. Is it possible to have the formula
automatically accommodate for this?
Eg
=ROUND(I36-I37,3-LEN(INT(Q16)))
in cell Q16 is a number 0.010 as displayed, and the sum of i36-i37=
0.007
I need the formula to say ok the minimum division size is in multiples
of Q16 (0.010) and change the 0.007 to either up or down depending on
the calculation.
This works currently, but the figure in Q16 can be 0.1 or 0.00001 etc,
and the sum in i36-i37 could be anything also as it is a calculated
error figure. I need the formula to be able to adapt automatically to
the reference DP in Q16.
Namely the "3-" part in the formula needs to accomodate for the Q16
number format changing.
When a new employee gets a uniform, after they write their first order, I have to make sure the cost of the unifrom gets deducted from their check. Payroll ends on Sunday every week. I want to use conditional formatting to highlight the cell when it's eligible for deduction/reimbursement. No matter what day they write the order, it won't be eligile until after Sunday. Because the day of the week will vary, what type of formula can I use to highlight the cell? My sale dates are in column "AC" and the reimbursement column is "AF".
View 4 Replies View Relatedi am looking for some formula to round off a decimal number
e.g. A1=8.288
if I use the formula ROUND(A1,2) the result is 8.29.
But I am looking for a result 8.288. That means it shoukd not round off rather the after decimal we should have only two numbers.
8.288 should be 8.28
27.4627 should be 27.46
Below is my current formula. Right now I have it rounding the results to the nearest .09. I would also like to have it round to the nearest .05 as well.
In other words, to be more exact: I need all numbers that end in 0 or 1 to be rounded down to 9; any numbers that end in 7 or 8 to be rounded up to 9; any numbers that end in 2, 3, or 4 to be rounded up to 5; and 6 to be rounded down to 5. And, of course any numbers ending in 5 or 9 shouldn't change.
I am using the MROUND function and it will round up or down to the nearest whole 50. Is there a function to round only UP to the nearest whole 50?
ie: 1704 is being rounded to 1700 I need 1704 to rounded to 1750
I need to round all dates that are between the 2nd and 15th down to the 1st and all dates greater than the 15th to the 1st of the next month.
i.e. 1/3/01 -> 1/1/01
1/14/01 -> 1/1/01
1/16/01 -> 2/1/01
I could use either a formula or macro.
I tried using the answers posted, but couldn't get them to work properly. I was able to use those answers, however, and modify them to come up with this:
=IF(AND(DAY(A1)>=1,DAY(A1)
=IF((OR(A1"",B1"")),IF(ROUNDDOWN(A1,0)=ROUNDDOWN('Sheet2'!$E$1,0),C1,IF(ROUNDDOWN(B1,0)=ROUNDDOWN('Sheet2'!$E$1,0),C1,"")))
All cells in this formula are dates in the format dd-mmm-yyyy h:mm (except C1).
The formula works fine only if I type in a date/time like 09-Jun-2007 0:00 in cells A1 or B1. As soon as I revert to an actual date/time eg 09-Jun-2007 9:53, it returns a #VALUE! error.
If I reference only one cell eg:
=IF(A1"",IF(ROUNDDOWN(A1,0)=ROUNDDOWN('Sheet2'!$E$1,0),C1,""),"")
it works fine with or without an actual time.
