Round The Numbers
Oct 7, 2009I have a number say:
156.9679628 then I go to format to change it to 2 decimal then it would show
156.97 and then I c&p that ... I still get 156.96796284 how do i just get
156.97
I have a number say:
156.9679628 then I go to format to change it to 2 decimal then it would show
156.97 and then I c&p that ... I still get 156.96796284 how do i just get
156.97
Is it possible to get excel to work out a formula but only allow the end values to fall as a 0, 2, 3, 5, 7, or an 8?
For example, show a value of 1881 rounded down to 1880 or 1880 rounded down to 1888.
round to two numbers. i have this formula
View 3 Replies View Related19.25581
1.01346
3.29376
0.25337
0.25337
1.26683
Total: 25.33660
If I use the Decrease Decimal on the total 25.33660, it becomes 25.34. How do I round all the sub numbers so that 25.34 is achieved.
Is there an easy way to round a range of numbers up? I have a big list of prices and I would like to keep the two digits after the decimal point as .00, but round up the main number. And I would like to do that without writing a formula in every cell. Is this possible?
View 12 Replies View RelatedI am trying to get a number from a cell ( lets say A1) multiply by another current number shown in a different cell (lets say B1). The number in cell A1 is 1.758. However, I have it set (through the cell format settings) so it rounds it up to 1.8. Now, when the number in cell B1, lets say it is 1, is multiplied by A1, the answer is 1.758, but I need it to multiply by the number shown (1.8) and the answer should be 1.800. How can I get it to do this?
View 12 Replies View RelatedI have a formula that shows "two cells numbers" in one new cell with spaces between, (see below) but when I enter a round numbers it drops the .0 I want to keep it as a .0 The formula I have is below for the two cells. I take the numbers from (cells B8 and C8) and put them both in one cell with spaces.
Cell B8 C8 Formula I'm using to get both numbers to show in one cell is
2.0 2.1 =B8&" "&C8
If the number in either cell is 1.2, or 1.3, it is fine. But if the number is 2.0, it drops the .0 from the cell showing both numbers. I need it to always show the .0 (or whatever) whether it be a .1, .2. or .0
Before I start a User Defined Function, does anyone know of away to round thousandths up to next hundredths ($US)
Ex
.031 = .04
.032 = .04
.039 = .04
Just an example of course the actual range of possibilites much larger.
I want to compare 3 columns of data across the same row with an IF statement to verify that all 3 numbers match. I would like the IF statement to only look to the first decimal place, rather than the entire number. In the first example, all columns equal. In the second example all columns equal only to the first decimal place. In either case, all 3 numbers would be equal when rounded down to one decimal place.
Example 1
Column A Column B Column C
84.5 84.5 84.5
Example 2
Column A Column B Column C
84.51 84.53 84.52
I have a sheet that has conditional formatting that looks at column D2 for a number and divides that by half. it then colors in a corresponding cell on a row in the sheet that matches that number. the problem i am having is with odd numbers like 23 it gives a result of 11.5 . all my cell numbers are all rounded to whole numbers. i need to round the 11.5 to 12 or 13 it does not matter which one... i just need it to round it up or down. I have tried everything i can think of but have had no luck. I attached my workbook so you can see how it works.
View 4 Replies View RelatedI have to change the layout of my numbers. At the moment the number have 3 decimal places but rounded to two decimal places and are separated with a dot (value in excel is 272.664 but shown just 272.66). After the macro or excel formula the output should be 000000000027266. So the last decimal places should be deleted (but the amount has still to be rounded!!!), the amount should be without a dot and the number has to be always 15 characters long (like in the example the above just with ceros before the number) I tried it in Format Cells but I couldn’t find anything. If I use the find and replace function to delete the dot, the third decimal place will be shown. Does anyone know if I can format it in excel or using a VBA code to change the number?
View 2 Replies View RelatedI don't know if there is a setting I'm missing or I'm going mad but when I use the round function in VBA it doesn't round.
I am using Excel 2000. See the example attached.
In the cell A2 I have a value 0.525, cell B2 has a formula "=round(A2,2)" which = 0.53, but cell C2 is assigned via VBA ie
Sheet1.Cells(2, 3).Value = Round(Sheet1.Cells(2, 1).Value, 2)
and the result is 0.52??
Using vba how to round off the value e.g.: The number 582.356894 has to be rounded off to 582.4 ....
View 1 Replies View Relatedi have a list of minutes in cells a1-a5 say 123 256 147 158 235 divided by 60 giving a total of 15.3 hours. i want the hours to round up if over the. 5 mark or round down if under .5 how would i get the desired result?
View 2 Replies View RelatedA cell value is calculated via a formula in vba. I want to round the result down to the nearest odd number or down to the nearest even number, depending on conditions in an other cell. The result is already an integer.
View 8 Replies View RelatedTried the code below to change figures from countless decimal figures to two, however excel is not having any of it,
Range("d:o").Select
Application.WorksheetFunction.RoundDown (2)
Why is Excel not rounding up a percentage of 93.5 to 94?
View 6 Replies View Relatedrounding the numbers. I am working on a quote in which quantity is arrived by dividing the sell price by Total sell price. The condition is the result (quantity) should always be a whole number, I can achieve that by cell formatting but when the calculation is done using handheld calculator the results are different.
I need the result to be same if using excel or handheld device i.e quantity in whole number.
Hi, I have this issue:
1.67 -> DISPLAY 2 ROUNDED
1.67 + 1.67 = DISPLAY 3 ROUNDED
but I would like to know how to sum 1.67 as 2
WANTED -> SUM 2 AS A NUMBER AND NOT A ROUNDED
2+2 = 4
I've been trying various combinations, but currently no joy
I need to work out how long the batten has to be so the roof sheets fit evenly, the measurement has to start from 1460mm and go up in increments of 80mm eg 1540mm, 1620mm, 1700mm and so on.
But the number has be closest increment of 80mm over the shed width if this makes sense, the size of the battens for 2400 width shed would be 2420mm but i need this to work out for any width shed not just 2400.
I am using the rounding function in excel and its rounding to the 10's, is there a way to round to the nearest 5?
View 4 Replies View Relatedi want a cell to round itself. i have a form i'm filling out, based on a percentage of a dollar amount. when the formula calculates, it only shows the first 2 numbers past the dollar point. however, the cell still "knows" what the number is. I have several of these formulas on a spreadsheet, and the sum of them at the bottom of the page is NOT what would you would get adding up the numbers you see on the page, as it is calculating numbers you can't see.
View 5 Replies View RelatedI am trying to do is have the roundup formula round up the result of a more complex formula BUT do it all inside of the same cell? The formula I have is in cell A1 and currently I have to have the cell that contains the round up formula (in cell A2) and have it reference A1. The complex formula is =((280283.47/798186.89)*(700*20*4)) and the result is -19,664.41 which I want to round up to $20,000. Is there a way to make this all occur in just cell A2 or am I stretching it?
View 4 Replies View RelatedI'm creating a spreadsheet to calculate materials with the following columns Cost/10% of Cost/Customer Cost/Qty/Total cost.
I understand that whilst showing rounded to 2 decimal places excel stores more than this in the cell. which then throws out the Total cost by a few pence.
My research leads me to believe I need to use the ROUND function but I'm unsure which cell to use it or how.
How do I take a date value and round it off to a fixed month and day of the year following the year entered.
Ex: In cell A1 I have a date: 12/28/2009
I want to round off the date to January 1 of the next year. So I need a function that would return 01/01/2010 (jan 1 2010).
How do I get Excel to round up all values from .3 onwards. EG 2.36 to 3 and 2.29 to 2?
View 4 Replies View RelatedI have a spread sheet with col's that I want to average their totals, but would like them to be rounded up or down.
View 3 Replies View RelatedI have this formula which works well, but the 3-len part needs to be
dependent on another cells content. Is it possible to have the formula
automatically accommodate for this?
Eg
=ROUND(I36-I37,3-LEN(INT(Q16)))
in cell Q16 is a number 0.010 as displayed, and the sum of i36-i37=
0.007
I need the formula to say ok the minimum division size is in multiples
of Q16 (0.010) and change the 0.007 to either up or down depending on
the calculation.
This works currently, but the figure in Q16 can be 0.1 or 0.00001 etc,
and the sum in i36-i37 could be anything also as it is a calculated
error figure. I need the formula to be able to adapt automatically to
the reference DP in Q16.
Namely the "3-" part in the formula needs to accomodate for the Q16
number format changing.
I have sales figures from each region and need to convert those to percentage. and then when i try to add up those percentage shown on screen in excel, sometimes they will add up to 100.1% or 99.9%. Then i will have to manualy adjust the one that excel didn't round up but larger comparable to other regions in the 2 dp.
View 13 Replies View RelatedWhen a new employee gets a uniform, after they write their first order, I have to make sure the cost of the unifrom gets deducted from their check. Payroll ends on Sunday every week. I want to use conditional formatting to highlight the cell when it's eligible for deduction/reimbursement. No matter what day they write the order, it won't be eligile until after Sunday. Because the day of the week will vary, what type of formula can I use to highlight the cell? My sale dates are in column "AC" and the reimbursement column is "AF".
View 4 Replies View Related