Autofit All Cells In Many Worksheets

Jun 22, 2008

1. autofit all cells in 38 worksheets
2. copy the previous row without looking up or deleting or inserting. Just a simple copy previous row of values and formulas down one (to the next row empty or not)
3. Hide columns with headings hide in the first cell of the column.

Remember, I have 38 worsheets in the same workbook that it has to cycle thru. 4 of those are pivots, so no need to include those.

View 9 Replies


ADVERTISEMENT

Autofit All Columns In All Worksheets

Jun 7, 2008

I'm trying to not have to go through every worksheet in my large workbook to autofit the columns in each worksheet to my cell content.

View 4 Replies View Related

Autofit Merged Cells From Pdfs

Dec 3, 2009

I've just created a spreadsheet that we will be using as a project review form. In this spreadsheet I have multiple rows of merged cells, column D to N, for comments. I need these comment areas, merged rows, to autofit whatever is cut and pasted or typed into them.

The first problem is cutting and pasting from a pdf. All of the documents we received for the projects we bid are in pdf format. We often cut and paste from those documents into an older version of our review sheet that was built in Word. Trying to cut and paste the same information into Excel ends up in failure. Is there a way that this can be done without jumping through hoops?

The second problem I’m running into is when I cut and paste into a comment area I get the typical Excel error message that the information being pasted does not fit the area it is being pasted into. It there a workaround for this?

My third problem is autofitting the pasted information into the merged cells. I’ve seen some VBA and tried a couple but they don’t work automatically when the comments area is filled. How can I do this? I don’t know VBA. I'm using MS Office 2003

View 2 Replies View Related

Autofit Merged Cells With Wrap Text

Aug 6, 2007

I found referred to writing a vba code such as the one below:

Sub Format()
Rows(x).entirerow.autofit
End Sub

I have tried a vba code such as the one above but the issue persists.

I have a worksheet with merged cells [horizontal]; each cell is also formatted to warp text.

The issue is that the row size or cell size [vertical] does not adjust when the user types more text than what the cell size can handle.

View 3 Replies View Related

Shared File Prints Differently For Different Users - Autofit Wrapped Cells

Apr 16, 2014

Here's the details:

Same file shared by many users in the office. File is maybe 2200 rows long and 20 columns wide. Last column is a text field where users can explain variances. Cells in the last column are wrapped and the rows auto-fit on the height. Zoom is set at 100%.

One person opens the file and it looks fine on the screen. Print preview also looks fine. File prints out perfectly.

Another user opens the file and it looks fine on the screen. BUT, print preview shows that the bottom line or lines of text is cut off. File prints exactly like the preview showed with clipped text.

Both users can point the file to the same printer, but that doesn't seem to change anything. Still prints with text clipped for one person and perfectly for another...

View 1 Replies View Related

Copy Cells / Range From Worksheets Positioned Between Two Worksheets

Jul 7, 2014

Let's say I have a workbook with 7 worksheets named, for example, "Instruction", "Begin", "Worksheet 1", "Worksheet 2", "Worksheet 3", "End", and "Data". (in that order)

What I want to do is run a macro to go to whatever worksheet that is in between "Begin" and "End" and copy, for example, cells $C$1:$D$10; then paste as formula into worksheet "Data" starting from cell C1 and then down a list (i.e., copied cells from "Worksheet 1" get pasted as formula into "Data" cells C1:D10; then copied cells from "Worksheet 2" get pasted as formula into "Data" cells C11:D20, and so on and so forth).

But if I were to add more worksheets (e.g., "Recipe" and "ToDo") positioned in between "Begin" and "End" and run the macro again, it'll either 1) re-copy all the formulas from the included worksheets back into "Data" including the formulas from the newly added/placed worksheets or 2) it'll add the formulas from the newly added/placed worksheets and paste into "Data" at the end of the list.

Can create the macro to run based on the position of worksheet, and not based on the name of worksheet, since ultimately there will probably be over 10 worksheets between "Begin" and "End".

View 4 Replies View Related

Autofit All Columns

Nov 25, 2008

I am using Excel 2007 and I would simply like to autofit every column o that the information fits and is visible. I would do this myself, but when you have to open many files with as many as 100 columns, its not fun.

View 2 Replies View Related

Way To Autofit Whole Workbook?

Feb 5, 2009

Is there a way / code i can put into a macro which can autofit a group of sheets or a whole work book. I have a workbook with 100's of sheets and it takes alot of time to click each sheet and autofit them manually.

I do run a macro for each sheet, so if i could build it into a macro by adding the code to it that would be great

View 7 Replies View Related

AutoFit Columns With Macro

May 14, 2014

I am trying to program a macro to AutoFit 29 columns on 3 different sheets. However it keeps coming up with "run-time error '1004' select method of range class failed". Here is the code

[Code] .....

View 4 Replies View Related

Autofit Rows Using Macro

Nov 19, 2008

I'm trying to Autofit a number of Rows within a macro. I need to autofit Rows 8 to 80 as the content of these rows will have been updated by lines earlier in the macro. Some rows will now contain more than 1 line of text whereas others will now be blank.

I initially tried to use the

View 4 Replies View Related

VBA To Autofit Row Height With A Minimum

Jul 10, 2009

I have a range named "rngOrders" on an Excel 2003 worksheet. I'm looking for a VBA macro that will set the row heights of the range to autofit (for rows/cells with wrapped text) and also set a minimum row height of 19.5 points for all rows.

View 5 Replies View Related

AutoFit Max Width Size?

Feb 22, 2012

I wish to autofit all cells in a database to a maxwidth. ie:

Code:
With Range("A1:F1250")
.MaxWidth = 100px
.AutoFit
End With

View 1 Replies View Related

Autofit Selection Is Not Working

Jun 11, 2008

After Format > Column > Autofit Selection, the cell width is STILL not sufficient. Values with many digits do not show up in the print out (only ######s appear). What should I do?

View 9 Replies View Related

Autofit, But Not The Complete Column

Feb 2, 2009

I have some Worksheets in which cell A1 contains a textual heading for each Worksheet.
On each Worksheet, cells in the range A2 to O5 containg headings; the data goes in rows 6 onwards.

In VBA script, I'd like to autofit columns A to O, but starting at row 2 so the text in A1 is not included. For each sheet, I can determine the last row, to get a "range" to autofit (e.g. "A2:P15").

I've run a search on Autofit; the only examples I can find autofit the whole column or set of columns.

Is it possible to autofit starting at a specific row?

View 9 Replies View Related

Autofit Columns (A:G) On The Last 5 Sheets Using VBA

Apr 20, 2006

I have an excel workbook with 7 worksheets. I am wanting to autofit columns (A:G) on the last 5 sheets using VBA.

View 3 Replies View Related

Autofit On Workbook Open

Feb 27, 2007

autofitting on workbook opening. i'm using on workbook_open:

columns("b:b").entirecolumn.autofit

but underneath, i have a data query range that refreshes and best fits the columns accordingly...(over writing the autofit...)?

View 2 Replies View Related

Autofit All Columns Of The Activesheet

Jun 7, 2007

I am trying to write a small sub which will make do an "AutoFit" for all columns of the Active Sheet. For example, the code below does an "AutoFit" for columns A:J of a sheet. How can I make it do the same for all columns (not only for columns A:J) of the ActiveSheet?

Columns("A:J").EntireColumn.AutoFit

View 2 Replies View Related

AutoFit Visible Columns Only

Jan 4, 2008

I have a worksheet that has several hidden columns and wish to have the EntireRow.Autofit apply to all rows in the current region based on visible columns. After using the WrapText method on all visible cells, one of the hidden columns with a lot of characters causes the entire row to be much larger than desired. Is there a way to use EntireRow.Autofit to only expand the height of each row in the current region as necessary based only on the visible cell contents in that row?

Set AllCells = ActiveCell.CurrentRegion
ActiveCell.CurrentRegion.Select
With AllCells
.Font.Size = 6
.Font.Bold = False
.WrapText = True
.EntireRow.AutoFit = True
End With

View 9 Replies View Related

Listbox AutoFit Column Width

Jun 18, 2013

I just want to know how to Autofit Column width of Listbox.

View 12 Replies View Related

Autofit And Sort On Workbook Close

Dec 22, 2009

I am trying to manipulate some worksheets during a Workbook_BeforeClose event. On sheet names that end with "sd" they need to alphabetize the data and autofit the columns. All sheets should hide on close, except "order". This is what I have but warning - it did something bad to my workbook. I can't get it back again. Had to force close Excel.

View 8 Replies View Related

Excel 2010 :: How To Disable AutoFit

Dec 6, 2011

Every time I type a number too large for a column, Excel resizes that column. This is definitively not what I want to do. I googled a lot and looked at all options, but I could not find a way to stop this behaviour.

how to disable any Autofit initiave from Excel 2010?

View 3 Replies View Related

AutoFit Row Height On A Merged Cell

May 27, 2009

I'm using Office 2007 professional and I'm trying to format a cell (merged cell) so that when you enter text and it goes beyond the size of the designed cell that it will automatically continue and shift the additional text downward, like a paragraph. Also it shift everything below down with it. Is this possible? I have already tried wrap text field and AutoFit row height. This keeps it within the cell but it is not visible or printable once you tab out. I would like to have it continue like in a paragraph. Like a word doc may do. It’s visible and it shifts everything below downward as it grows, which also allows it to be printable.

View 9 Replies View Related

Me.Rows.Autofit With A Protected Sheet Not Working.

Jul 23, 2009

Me.Rows.Autofit with a Protected Sheet not working.
Basically I want to use vb code which is

View 2 Replies View Related

Listbox Column Widths And Lengths -Autofit

Dec 9, 2009

I've got a Listbox in a User form that looks at data on another spreadsheet purely for informational purposes, not to be selected. I have two problems with what it's doing:

1) There are 23 columns, of varying widths. However the listbox uses a standard width, so some items are truncated and some have too much room.

2) The data changes, and the number of rows may change from 2 to 15000. I've set the RowSource to cover the ranged from A1:W15000, but if only 2-300 lines are selected the user can't grab the scrollbar button to scroll through, but must instead use the arrow, which is rather slow.

Is there any way to set the column widths to match the data, and the Range to only go as far as the last populated row?

View 7 Replies View Related

AutoFit Size Of Comment Box Of Selected Cell(s) To Its Content

Jan 18, 2014

I am wondering within the Excel interface, is it possible to auto-fit the size of a comment box to its content?

I have searched the internet and found that a macro as follows could do the job:

Sub FitComments()
Dim c As Comment
For Each c In ActiveSheet.Comments
c.Shape.TextFrame.AutoSize = True
Next c
End Sub

However, this Macro applies to and resize all of the the comment boxes in the active sheet.

I would like to just auto-fit the comment box only to the selected cell, or even better, to multiple selected cells.

View 4 Replies View Related

Autofit Problems With A Row That Includes A Formula Referencing Another Cell

Jun 14, 2006

I have a document that I created that has merged cells. In order to autofit the rows of this document, I referenced the merged cells in singular cells that are not visible to the users of the document. (They are not hidden)

It had been working relatively nicely, but now the autofit function is not working correctly. If I copy and paste values into the cell it will work, but this would not be my ideal solution. I have tried playing with the number format, which works for the most part if I set it to "&" - text. It doesn't work for some longer cells with line breaks in them.

View 3 Replies View Related

Create New Workbooks From Filtered List Then Autofit Columns

Jan 16, 2008

I used the code below to successfully create workbooks from the filtered list using the below code provided on this forum (see link below). The only problem is that I want the resulting columns to fit to width.

Looping Through A Range - Use Result As Criteria In A Filter

View 9 Replies View Related

Protect Certain Locked Cells From Editing And Allow Certain Unlocked Cells To Be Changed On Multiple Worksheets?

Jan 31, 2014

1.I need to protect certain locked cells from editing and allow certain unlocked cells to be changed on multiple worksheets.

2.When all of the changes are made to the unlocked cells, I need to password protect the entire workbook (except one worksheet) from any changes. (i.e. Prevent even the unlocked cells from being edited)

3.I also need a password to un-protect the workbook and return it to the state described in # 1. above .

View 1 Replies View Related

Autofit Only Current Cell Column To That Cell Width

Dec 15, 2011

When I'm moving around in an Excel sheet, I want to have a keyboard shortcut that Autofits only the column I am "in", and only to the width of the cell I'm "in". So I can arrow-key into a cell, hit ctrl-shift-W or whatever, and the column will autofit.

I try Cells.EntireColumn.AutoFit but that's not what I want, it autofits every column. Sometimes this is not appropriate and I want to do it manually for the columns I want auto-fit.

I guess the more general question is how do I write VBA code for the column I am in and not every column or a specific column - not Columns("A:I") or whatever, it's going to be a different column every time depending on what cell I'm editing.

View 2 Replies View Related

Sum Different Cells From Different Worksheets

Jan 17, 2008

I've seen several posts for how to sum the same cells over multiple worksheets, but what I'm trying to do is sum different cells over multiple worksheets. I know what the syntax would be if I was to manually type in the formula. For instance if I wanted to sum A1 to A5 on sheet 1, B2 to B3 on sheet 2, and A20 to D20 on sheet 3, it would be SUM(Sheet1!A1:A5, Sheet2!B2:B3, Sheet3!A20:D20). but how can I do that by simply highlighting the desired cells and using the summation button rather than manually typing in the formula?

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved