i have a validation list of about 100 items. Is it possible that on tabbing into the cell the validation list can automatically open and as I start to type, it will take me towards the right list item?
View 1 RepliesI can't seem to find a way to make a data validation list automatically show the first item in the list rather than showing blank.
View 10 Replies View RelatedI have created a validation list which automatically adds any new values a user enters.
Is there any way of sorting the validation list every time a new value is added to the list?
I've been using Dave Hawley's "Excel Data Validation List - Automatically Add to a Data Validation List" in my wb with great results, but now I am going to use a secondary wb to keep the Data Validation List and herein lies my problem. I lack the VBA skills to be able to modify the code and references so that when I input into the primary wb the data is updated in the secondary wb. The Primary wb is an xlt that I'm developing, each time a new xls is opened from the Primary.xlt, vba in the Primary.xls opens Secondary.xls. Secondary.xls has a named range "Names" which I wish to be able to update when data validation is performed in Primary.xls per the sample on this web site.
View 3 Replies View RelatedI want to do now is link the code below to a drop-down menu I have created on one of the sheets in the workbook. I created this list using data validation and declared this drop-down menu as MIndex and the values to choice from are 0,1,2.
Does anyone know how I can link this drop-down menu to the macro. So basically once the drop-down menu is activated run this macro.
Sub SumMonthlyVol()
Dim wSheet As Worksheet
For Each wSheet In Worksheets
Select Case UCase(Left(wSheet. Name, 2))
Case "AJ", "CJ", "PJ"
If (MIndex = 0) Then
wSheet.Range("L52") = "= SUM(R33C4:R50C12)"
Else
If (MIndex = 1) Then
wSheet.Range("L52") = "=SUM(R34C4:R50C12)" ......................
I'm trying to implement the feature from this great Ozgrid 'how to', and it's working for the most part, but the VBA falls over here...
Private Sub Worksheet_Change(ByVal Target As Range)
Dim lReply As Long
If Target.Cells.Count > 1 Then Exit Sub
If Target.Address = "$F$10" Then
If IsEmpty(Target) Then Exit Sub
If WorksheetFunction. CountIf(Range("Dept"), Target) = 0 Then
lReply = MsgBox("Add " & Target & " to list", vbYesNo + vbQuestion)
If lReply = vbYes Then
Range("Dept").Cells(Range("Dept").Rows.Count + 1, 1) = Target
End If
End If
End If
End Sub
Basically, I have a tab which contains 2 lists. One in Column A and one in Columb B. I want the corresponding dropdowns on a different sheet to allow entry of anything that's not on either of the lists.
I can get it to work if I place the lists on the same sheet as the main 'form', but I need to keep them on a seperate sheet (and as the 'how to' suggests the lists can be on any sheet, I thought it'd work 'out of the box').
trying to incorporate this in to a workbook in which name range is on a separate sheet to where the validation cell is but with no success could any one tell me how to adjust it so that it works,
View 8 Replies View RelatedI've been trying to create a form that contains a list with an auto-complete option.
[url]
I've tried it and it kinda works the way I'd like it to except:
1. Excel crashes if you press TAB or Enter after choose your selection.
2. You have to Double-Click on the Validation list tab to bring up the combo box.
If possible, it would be great if Excel didn't crash after pressing Enter or Tab
and if the combo box showed up immediately on selecting the validation list cell (or single click).
The VBA code is:
'==========================
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, _
Cancel As Boolean)
Dim str As String
Dim cboTemp As OLEObject
Dim ws As Worksheet
Set ws = ActiveSheet
Cancel = True
Set cboTemp = ws.OLEObjects("TempCombo")
On Error Resume Next
With cboTemp
how to attach the file here but the website I mentioned contains a sample excel.
[url]
To summarise I'm hoping to create a sheet that:
1. Let's you click on the cell and then type something which causes it to autocomplete.
2. After I've made my selection I can press Enter/Tab/Click somewhere and it confirms it.
3. The rest of the sheet gets populated by results of lookup functions that are dependent on the selections.
On Sheet2, data validation is applied to cells D21:D70 to limit data to values to a list, which is a named range on another worksheet. There are ranges on two other worksheets with the same data validation rule. The range for the list is âSheet1â!D12:D26 (which is named âProcessesâ).
On Sheet1, the user enters a list of their processes. Then on Sheet2 (and the other sheets where the data validation is applied), they select one of the processes from the list. This all works fine until they go back to Sheet1 and modify one of the previously entered values.
For example, "Brush Teeth" is entered as one of the processes on Sheet1. It is then selected on Sheet2. Then, the user goes back to Sheet1 and changes the value to "Brush Hair." When you return to Sheet2, the value is still "Brush Teeth." It can be manually be changed by selecting âBrush Hairâ from the drop-down list (âBrush Teethâ is no longer available), but it doesnât automatically update.
Data validation was applied to a single cell (A3) and the list was on the same worksheet (B1:B3).
Option Explicit
Private oldValue As String
Private Const DVCell As String = "A1"
Private Const dataList As String = "B1:B10"
[Code]...
'This is worksheet event code, which means that it needs to be 'placed in the appropriate worksheet code module, not a standard 'code module. To do this, right-click on the sheet tab, select 'the View Code option from the menu, and paste the code in.
On Sheet2 (I assume I need to add this code to every applicable sheet), I tried editing the first part of the code as follows (changes in bold), but when I click on any cell on Sheet2 that has the data validation rule applied, VB returns the error âRun-time error â1004â: Method âRangeâ of object â_Worksheetâ failed.â If I go into the debugger, the second instance of âIf Not Intersect(Target, Range(dataList)) Is Nothing Thenâ is highlighted.
[Code] .....
I'm trying to create a spreadsheet that has a data validation in it. I have a drop down list that has to options to select; Yes and no. Every time I create a new row to add more information I have to go through the process of creating a new data validation for for each cell in this coloumn.
Is there anyway of creating a way that every time I insert a new row, a data validation list box will appear in the coloumn that I want it in?
Sample Workbook: datavalhelp.xls
I have a dropdown list in C24:C50 (=CategoryList) with data validation and a sub list in D24:D50 (=ItemList) with data validation. I am looking for a way to have code automatically run after selecting an item in the data validation dropdown list in column C.
Example; I click on C24 and make a selection. I what it to trigger code that would move me to D24 and open up the data validation list in D24. After the selection in D24 I would like it to move me back and down 1 row to C25. I have not found anything directly related to this but I have found that code can be run after a selection in a valadition list.
I am trying to learn the concepts, then apply them to a set of actual worksheets. I am trying to use named ranges from one worksheet in another worksheet. The named ranges need to expand. Although I can get the add data to a dummy worksheet to work within the same worksheet and I can even get a named range to work in the foreign sheet.
My problem is, when I can end up adding the additional data to the named range, it will only add one name. I have a number of named ranges that are referenced on various worksheets. The idea is, certain named ranges should be able to expand so I donft have to type them all in. (There could be hundreds of manufacturers or models.) I would also like them to be able to sort themselves after additional names are added to the named ranges. I would also like them to auto populate as well. I am using Excel 2003 SP3 (11.8307.8221). I have enclosed the file. Drop down lists (named ranges) are on the worksheet called DROP DOWN LISTS (LOCKED) **ITfS NOT CURRENTLY LOCKED**.
The data validation issues are on the worksheet called Rev7.0 Wood (Basic Sheet.) There are other instances to use these, but I hope to learn to do them myself on the other worksheets. Of particular interest is Column f.................
I want to create a macro that will open the look in list and stop so I can pick a file to open. Ive tried to use record a macro and ctrl-o, but the record a macro wont stop until I pick a file or cancel the file list. I also tried to use o in the short cut key box
View 5 Replies View RelatedI have a list for example with two variants "YEs, "NO"..
Is there any possibility to choose YES or no in any cell an reflect the same value in another list on another sheet.
I'm not sure if its possible to do what I want. I'm trying to do it without VBA as my users might have a high macro security setting.
I have a validation dropdown in A2 where they pick 'yes' or 'no' for FLSA. I would like B2 to be a dropdown (validation, listbox, whatever) that would change based upon A2. If A2 is 'yes' I want to use the data in A5:B7 and if its 'no' use A10:B12. Ultimately I want B2 to equal one of the numbers from A5 - A7 or A10 - A12. However when they click on the drop down they see the combo of column A and columb B as column A has no meaning for the user.
I'm trying to use data validation to restrict the user to only selecting values in a list which I create. Right now, the list is a named range. I'd like to get rid of the range and just use a named list. I create a name using the following as my list.
Insert > Name > Create
Name: Fruit
Refers to:
banana,apple,orange
When I try to use the name Fruit in my data validation, I get the message "The List Source must be a delimited list, or a reference to single row or column." I thought my name "fruit" was a delimited list.
I am trying to create a fairly simple spreadsheet with about 8 columns and about 400 rows. One of the columns features a drop-down list with about 8 or 9 different options. Dependant on which option is selected, i would like the entire row to change colour with that option.
For example:
FAILED - whole row changes red
SUCCESSFUL - row has no fill
Tested - row changes to orange
etc.
Is this possible within Excel 2003?
I'm looking for a way to get a unique list from a column to a data validation drop down list. Any fancy formula or vba script to create a UDF which. Does this?
View 5 Replies View RelatedI have a List of Different Fruits in Cells A1 to A5
Apple
Banana
Orange
Strawberry
Cherry
And I use data validation list in 5 different cells from Cells C1 to C5 then in every cell the list will show all the fruits,
But I want that if I select Any Fruit in cell C1 that should not be included in the remaining 4 cells, and the fruits selected in Cells C1 and Cell C2 should not be included in the remaining 3 cells and so on....
I Used the formula
=IF(C1=A1,OFFSET(A2,,,COUNTA($A$2:$A$5),1),0)
But this works fine if I select Apple in the Cell C1, then the List of C2 Shows all Fruits other than Apple, But if in Cell C1 I select any fruit other than Apple it does not work... (Using Excel2007 & Win XP)
I am attempting to use a named range as my Validation data source but have two questions:
1) It seems when you use a named range as a source the user can enter in any data they want in that cell. I really only want the user restricted to the list I give them. If I enter the list manually in the source box then it works but I really want to use a named range
2) My range is fixed to 10 cells and the user can enter in as many variables as they want (up to ten). When a user clicks on one of the cells that the validation is set to read the range the user has to always scroll to get to the top. When selecting the cell Ecel always defaults to the bottom choice in the list. I want to minimize the VBA because Mac users will be using this and VBA seems to be touchy with macs.
I would like to exclude blanks from the source of a validation list, I have found a really neat solution for vertical list in this topic, I have modified it, but I have missed something, the formula is not working.
View 2 Replies View Relatedi mtrying to get a validation list change depending on what is chosen in another list. I have attached an example, Yellow box is my validation and weather List 1 or List 2 in chosen I want the red box to be a choose of the list attached to those options. I've tried to put an If in there but Im al a loss.
View 3 Replies View Relateddear....can i set width in list box data validation (width in cell i set short).thanks
View 9 Replies View Relatedis there a way to force so that a cell value can be only of what a validation droplist offers, hence users can not enter their own values and have to use the droplist for cell content selection.
View 2 Replies View RelatedI am trying to make some of my data validation dropdown list boxes narrower. I was told one way to do that is to use combo boxes. (If there are any other ways, please let me know!)
I don't think my combo boxes are working. I had tried to make a combo box appear in each data validation pulldown cell by using this tutorial:
http://www.contextures.com/xlDataVal10.html
I followed this tutorial word for word, but when I try to test the code at the end by double-clicking on a data validation pulldown cell, no combo box appears.
How do I get data validation to automatically add an entry into its database.
Ex.
If a cell if formated for data validation and I make an entry thats not currently in its database, it enters it into its database.
I already have various dependent validation lists established using the INDIRECT function.
Now I want to figure out how I can automatically change the selected values given the selected list. For example:
Cell D11 is a validation list with options: Boat/Car
Cell D15 is a validation list where if D11 = Boat the options are Catamaran/Sailboat/Tugboat. If D11=Car the options are Convertible/Sedan/Midsize.
The problem is that if D15 is preselected as Sailboat, for example, and you go back and change D11 to equal Car, cell D15 remains an option from the Boat validation list. I would like it to automatically update as the 1st item on the car validation list.
I am using Data Validation on some fields to create a drop down list from a named range! These fields however allow you to enter values that are not in the list.
Is there a way to make the cell have to be an entry from the data validation list?
i'm writing a refrigeration selection user interface, working from values on an excel spreadsheet. how to get the programme to automatically select a value from a list or range once a user has selected corresponding value from a list within a combobox. for example if a user sets the temperature of their refrigerator to -5 celsius i need the programme to automatically select the corresponding value of enthalpy for the air at that temperature.
View 5 Replies View RelatedI'm currently working with 3 dropdown lists depending on each other using data validation and =indirect(). I arranged them like in a top-down approach where you have a mother-list and child-lists (categories-->subCategories-->subCategoryCriteria). The user should easily chose first a category then a subCategory etc... This part works perfectly
My question is: when a user chose in the dropdown list e.g. a category, a subCategory and a subCategoryCriteria and he now maually deletes the value in the highest level, which is the Category (mother-list), all sub level values like subCategory and subCategoryCriteria will stay. It shouldn't be that way, because it's not logical. If you turn a tree upside-down (top-down approach) and cut one of the higher positioned trunks, all lower positioned trunks will fall off as well, right? So, my question is: can I use a conditional formatting or a formula to delete or fade out the value in the lower lists when the higher list value is being deleted?
I tried to use If-formula in combination with indirect in data validation, like =IF(A1="";("");INDIRECT(B1))...just and example.
The value doesnt need to be deleted, it could also be automatically face out like white on white or something. It's just confusing for the user if he deletes the highest choice and the lower choices still stay.