Code That Automatically Run After Selecting Item In Data Validation Dropdown List In Column C
Oct 12, 2011
I have a dropdown list in C24:C50 (=CategoryList) with data validation and a sub list in D24:D50 (=ItemList) with data validation. I am looking for a way to have code automatically run after selecting an item in the data validation dropdown list in column C.
Example; I click on C24 and make a selection. I what it to trigger code that would move me to D24 and open up the data validation list in D24. After the selection in D24 I would like it to move me back and down 1 row to C25. I have not found anything directly related to this but I have found that code can be run after a selection in a valadition list.
View 2 Replies
ADVERTISEMENT
Jun 20, 2008
I can't seem to find a way to make a data validation list automatically show the first item in the list rather than showing blank.
View 10 Replies
View Related
Apr 7, 2014
I'm trying to create a spreadsheet that has a data validation in it. I have a drop down list that has to options to select; Yes and no. Every time I create a new row to add more information I have to go through the process of creating a new data validation for for each cell in this coloumn.
Is there anyway of creating a way that every time I insert a new row, a data validation list box will appear in the coloumn that I want it in?
Sample Workbook: datavalhelp.xls
View 3 Replies
View Related
Apr 29, 2014
I have two cells and both have a drop down list. I would like Excel to automatically select an item from the second drop-down list based on the manual selection of the first drop-down list. The second cell needs the have the dependent item appear in the second cell not just be available in the drop-down list.
For example, Cell A1 has a drop-down lsit of the names of fruits, vegetables and flowers (apples, bananas, carrots, carnations, corn, daisys, tomatoes, zuchinni). Cell B1 has another drop down with three items (fruits, vegetables & flowers) which needs to be dependent on the first list. Further, I would like cell B1 to automatically select the appropriate item.
For example, if "carrots" is selected in cell A1 then I would like "vegetables" to be selected and automatically appear in cell B1. If "carnations" is selected in cell A1 then I would like "flowers" to appear (not just be available in the drop down).
View 6 Replies
View Related
Jan 18, 2013
Basically on a summary page, on sheet 1 say I have a formula which picks up the unit cost (I have this as an array across 5 years)
What I then want to do is multiply this by a volume driver. I have a list of these drivers on a seperate page, so for convenience lets say DRIVER_01,DRIVER_02 etc. These are also 5 years arrays.
So what I want to do it be able to select which driver I want to use for volume on the summary, from a drop down box I have set up, and then the formula pick up that named range, and not just recognise it as a text cell.
I need the ability to change the driver in the future, hence the drop down box. I can also get the unit array part to work fine, I'm just struggling to get this driver array to work..............
View 2 Replies
View Related
Jan 11, 2013
I'm trying to make a spreadsheet that can be used to easily build a collective list of steps, for a user to read and follow line-by-line.
I want a source sheet of "steps" that I can change over time, and the resulting tabs that reference the source sheet get updated/populated automatically.
I've pieced together some VBA code from other sources, which kind of does what I want it to:
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Row > 1 And Target.Column = 1 Then
Dim SourceSheet As Worksheet
Set SourceSheet = ActiveWorkbook.Sheets("Steps")
Dim TargetSheet As Worksheet
Set TargetSheet = Target.Worksheet
Dim c As Integer
Dim Source As Range
[Code]...
But there are some problems:
1) The data auto-populates into a row. It would read better if each step was in the same column, meaning rows would need to be automatically added upon selecting something from the drop-down list. The number of rows that need to be added vary based on the number of steps in the source sheet, for the selection made from the drop-down list.
2) If you make a change to the source sheet, my goal is to have the other sheets referencing the source sheet's lists of steps update automatically, so you only need to update the steps in one spot and everything you've built from them gets updated instantly. Currently, you must select a different choice from the drop-down list, and then change it back, before it populates the "new" steps from the source sheet.
This is my first time using VBA.
What I have so far is attached: testAutoPopulate.xlsm
View 2 Replies
View Related
Oct 28, 2011
I'm looking for a way to get a unique list from a column to a data validation drop down list. Any fancy formula or vba script to create a UDF which. Does this?
View 5 Replies
View Related
Apr 8, 2013
I have a spreadsheet where user can search for information inside a search box and the appropriate rows are returned using formulas.
I have a drop down list (Category: Model) in the search box as well as a search field (Category: Program, cell D2). Underneath the search box, search rows are returned with column categories: Program, Model, etc.
What I require is that if a user enters the specific program into the search field D2, then the dropdown list would automatically choose which model that program belongs to based on the returned row.
For example, if I typed "engine" into D2 and pressed enter,
Under the records section (Row 14 and beyond), the following record will pop up:
Program
Model
Indicators
Engine
F-16
3a
Based on the record, F-16 would be chosen from the dropdown list. Is there any way this can be done?
View 6 Replies
View Related
Jun 15, 2007
I'm trying to use data validation to restrict the user to only selecting values in a list which I create. Right now, the list is a named range. I'd like to get rid of the range and just use a named list. I create a name using the following as my list.
Insert > Name > Create
Name: Fruit
Refers to:
banana,apple,orange
When I try to use the name Fruit in my data validation, I get the message "The List Source must be a delimited list, or a reference to single row or column." I thought my name "fruit" was a delimited list.
View 4 Replies
View Related
Feb 28, 2014
I wrote a macro that creates a data validation list from a set of cells on Sheet 1.
On Sheet two I would like a have Macro select each item in order on the validation list and paste into every fourth cell.
For example, if my Data Validation list on Sheet 1 contains three items: Comp. A, COmp. B, Comp. C
On Sheet 2, I would like to see Comp. A in cell K1, Comp. B in cell O1, Comp. C in cell S1.
I have seen a few codes but nothing that works effectively.
View 4 Replies
View Related
Mar 6, 2008
Is there a limit to the number of entries in a validation list? I have a list that contains about 300 entries, but the drop-down list only shows 246 entries. I am sure that the references are correct.
View 2 Replies
View Related
Feb 25, 2014
I have a list on one worksheet and I use a dropdown list from Data Validation to select the name required.
My list is so long that I would like to be able to type a letter or two to access to the name quicker instead of scrolling down.
I copied a formula that worked for someone else that put this formula in the data validation
(IF(I36<>"",OFFSET(Player,MATCH(I36&"*",Player,0)-1,,SUMPRODUCT((MID(Player,1,LEN(I36))=TEXT(I36,"0"))*1)),Player))
I do not wish to use VBA is possible.
View 1 Replies
View Related
Mar 6, 2013
I have a query with data validation.....
Can I have a cell rage.. say A2:E20...and every cell in it has a drop down data validation list, from data inputted into L2:L27 (For examples lets say L2 is A, L3 is B, L4 is C, L5 is D and so on).
if somewhere in the range A2:E20, say B6 I was to select D from the drop down list, I want the remainder of the cells in range A2:E20, to have the drop down list without the value D in it, and so on, so the more cells in the range I fill from the list, the list for empty cells gets smaller and smaller until there are none left.
View 4 Replies
View Related
Jun 13, 2013
i created a drop down list from data validation and it's a list of names. as i select from the list of names, i just want the initials of the names to be shown, not the entire name itself.
cnf_gif.gif
cnf.gif
based on this example, what i want is to select from the list of names and only the initials are shown!
i believe its something related to custom number formats...
View 5 Replies
View Related
Feb 3, 2010
I have a dropdown box to choose a category.
When the category is chosen it displays the relevant course names which corresponds to that category (this could be 1 course up to 10 different courses).
Along with that course name it gives the relevant course overview.
This works exactly how i want it to. (thanks to Zbor from a previous thread)
I now want to expand further and give the corresponding course objectives for each course that shows up in the results.
I have attached a workbook as its much easier to see the dropdown box working.
Sheet 2 is the working sheet and sheet 1 will contain all the source data.
I have highlighted the columns affected in Blue Blue column on sheet 1 will have the course objectives on the same line as the course they belong to Blue column on sheet 2 is where they will be displayed when the correct category selection is made.
The course objectives are unique to the course title and course overview.
View 6 Replies
View Related
Mar 14, 2014
I have a very detailed spreadsheet with drop down lists. I would like to block other cells if previous cells have certain selections. I have 7 columns of data that get inputted throughout the month. These cells have drop down selections that I have created. Is there any way to create a drop down menu AND another data validation? So If a selection is made, then the next cells will be blocked, using data validation "custom"?
View 2 Replies
View Related
Jun 1, 2014
It is basically a simple sheet that lists the price (Column C) of different items (Column B) based on their Category (Column A).
I am trying to have an automated pricing sheet (on different sheet) utilizing data validation and drop down lists.
For example each row should have this, the drop down list in the first columns should list all the Categories available (This part works fine for me and i can take care of the duplicates).
Once that has been selected, i have now the option of selecting using drop down list also (in second column) the items corresponding to the Category selected in first column (Only the items that are part of that specific category should be listed in the drop down list).
Once the item has been selected, the price of that respective item should be listed automatically in the 3rd column.
View 1 Replies
View Related
Sep 11, 2013
I have giant excel spreadsheet that I am trying to clean up. I want to make one of the columns (with around 3000 rows and may of them are the same) into a drop down list. However, when I try doing so from the data validation tab, I get duplicates, triplicates, etc. of the same item.
View 1 Replies
View Related
Sep 12, 2012
I am in the process of creating a database, and have used 'Data Validation' to create drop down lists in order to obtain information quickly from the database.
I have encountered an issue where if I have a list the resembles the one shown below, the drop down list will show spaces.
This is particularly an issue for myself and my database because there is over 1,000 items in the list, and there are countless empty cells within the list. I have tried sorting the list, BUT because the database is quite large, sorting it will disrupt other functions of the database.
Ideally, I would like the drop down list to show only entries within the list that are not empty so the drop down list is entirely relevant, and more user friendly.
View 2 Replies
View Related
Mar 23, 2014
When it huge list of data for drop down list, it is too much time consume. If i type a letter, it will show all those quarry or data which start with that letter. It need not to scrolling huge list.Scrolling is barrier for use of data validation for me . I tried all dependable data validation.
View 1 Replies
View Related
Jun 30, 2008
I have a data validation in a cell that works like this : if a control cell has the value "F" it validates the input with some dates in a custom list, if not it does nothing.
The formula looks like this :
=IF(F2="F",datelist,"")
It works fine but I also want it to display the drop down list when cell F2 = F, now all i can do is type a value and it checks if it's ok.
Can I do this without using vba ? I will send this to other persons and I don't want the macro warning to pop up when they open it.
View 9 Replies
View Related
Oct 27, 2006
I want to make some of my data validation dropdown lists narrower, so they end at the length of their longest list entry.
I know NOTHING about VB and although I found some "free code" online that claims to do just what I want to do above, I have no idea how to paste it in or where to paste it in, etc.
View 9 Replies
View Related
May 2, 2014
I have a Drop-Down Menu that looks like:
BOS
PIT
COL
NYR
using List with source =Lists!$B$2:$B$9, which is just the validation list
My Table:
Team Player
BOS Bergeron
BOS Krejci
NYR Nash
... ...
My goal is to limit the end user from choosing BOS more than two times from the drop down menu
View 4 Replies
View Related
Jan 2, 2012
I'm using Microsoft Excel for Mac 2011. I'm creating a drop down box from List within Data Validation. It's only letting my create a list of 17 names. My longest list is 63 names. What do I need to do to create a list that will support that?
View 3 Replies
View Related
Jul 22, 2012
I have a table created that uses countifs formulas to pull data. I want the data to change based by client - so I created a drop down list with each client's name, and thought I could add a criteria to the countifs formula based on the client's name in the cell- but I get a value error.
View 9 Replies
View Related
Aug 21, 2012
I have the following function in cell (table 2 column C) where I want to find a contact name from my table TMI if 3 criteria are true (client, account, NAM) For each contact I have 1 true combination of client/account/NAM but for each client/account/Nam I can have several contacts.
{=OFFSET(TMI[[#Headers],[Contact]],MATCH(1,(TMI[Client]=$B$1)*(TMI[NAM]=C3)*(TMI[Account]=B3),0),,COUNTIFS(TMI[Client],$B$1,TMI[Account],B3,TMI[NAM],C3),1)}
The function is working well but shows only the first contact name if I have 3 contacts for the same client/account/NAM. (I pressed Ctrl+Shift+Enter)
When I press F9 on the function, it shows all the contact names! so they are somewhere.
Hence, I have copied and pasted this function into data validation / list in the source but it came up with an erreur.
Table TMI:
A B C DClient
Account
NAM
Contact
Comments
[Code]..
Table with offset function:
A B C D
Chi
Account
NAM
Contact name
Comments
[Code]..
All client, NAM and account lists are dynamic !
View 2 Replies
View Related
Sep 26, 2013
I'd like to create a drop down list in data validation from a column of data that contains numerous duplicates.
For example, let's say column A contained hundreds of transactions with either North, South, East and West, how could I create a drop down list in another cell that only had four selection options?
View 5 Replies
View Related
Feb 7, 2012
So, I need to figure out how to make the populated contents of a single dropdown box dependent upon the selected results in two other drop downs.
As there are ~35K lines in the sheet, creating Lists is impractical, and VBA is out due to client security settings.
My data sort order is: Region Name > Area # > Facility Name
I have a drop down to select the Region I want to work in.
The drop-down for Area # populates based on the selection from Region Name.
The hang-up is that the area numbers are 1-4 for each Region.
So, I can't simply populate another drop-down for Facility from the result from Area #, but it has to be based upon the results of both of the former results.
View 4 Replies
View Related
May 13, 2012
I would like to be able to make the same thing and select items for my drop down list, that are not blak and follow a specific condition. But I don't know how to include the condition in the array formula.
The condition I need is follow:
I want to have a dropdown list with Items that are not blank, and First N > Last N.
[URL]
It would be preferred to have formulas.
View 5 Replies
View Related
Jul 6, 2006
I've been using Dave Hawley's "Excel Data Validation List - Automatically Add to a Data Validation List" in my wb with great results, but now I am going to use a secondary wb to keep the Data Validation List and herein lies my problem. I lack the VBA skills to be able to modify the code and references so that when I input into the primary wb the data is updated in the secondary wb. The Primary wb is an xlt that I'm developing, each time a new xls is opened from the Primary.xlt, vba in the Primary.xls opens Secondary.xls. Secondary.xls has a named range "Names" which I wish to be able to update when data validation is performed in Primary.xls per the sample on this web site.
View 3 Replies
View Related
