I just can't figure out how to create a formula to figure out the average Percentage increase over two figures.
For example:
Amount 1 Amount 2
$17,330,000$20,150,000
Would I use the average function?
I have a sheet comprising of 4 columns, laid out like the below ;
A4 = Equipment
C4 = Cost
E4 = Revenue
G4 = Gross Profit
I require to enter a percentage into the gross profit column, and for this to interact with the cost column, then for the revenue column to return the total of the cost including the profit.
From below data I want a formula to know how many pecentage it dropped and how many percentage it was increased.
ABPercentage431112222207106141135447
I'm doing research with a professor at the University of Florida. This is my first time using Excel to any extent, so I need everything from the ground up!
I have the housing values for each of the 50 states from 1975 to 2006. I need to analyze each state individually to see if there were any points during that 26 year span when housing values increased by more than 20%. I need to know when this increase started and when values peaked and began to fall. I could do this manually, but I'm assuming that would take a while.
Is there a simple way to do this in excel? A macro, or a UDF (I have no clue about either of them by the way).
The 50 states are listed in a column and the rows next to each state having housing values for the 26 years. ( I don't know if that is relevant).
I need to do the following:
If column X is less then < £1000 will have a 15% increase, those less than < £1500 a 12 % increase and any figure greater than > £1500 a 10% increase.
I could easily do this using a case statment using VBA, but im not allowed, any idea of a formulae that would do it?
How do I change numerous numbers in several different columns by a constant amount? example reduce each number in each of these columns by 50%.
View 9 Replies View RelatedI want to calculate % increase with time related fields
Field A1 = 01:53 (formatted custom as mm:ss) happy to format some other way
Field A2 = 02:08 as above
I want to know the % increase. The correct answer is 13.27% , as 01:53 = 113 seconds and 02:08 is 128 seconds and 128/113 = 1.1327 so 13.27%
I need a formula that will tell me how many minutes/hours are needed to hit a certain percentage.
For example, I need to do 60% of my time doing one thing (Team), and 40% of my time doing another (Individual). So, I need to know, if I've spent 5.5 hours doing Team, and 4 hours doing Individual, I need to know that I need to do .5 hours to hit the correct split.
I can't figure out what formula to use that will increase the current total to best figure out how many minutes I'll need to do either Team or Individual to hit the 60/40 split. It doesn't need to actually tell me 15 minutes, etc, but .25 would be fine (everything is done in .25 increments).
I need a formula that can work out a percentage increase or decrease from cell J2 to L2.
J2 is the current data with L2 being the previous data - so the formula would compare J2 with L2 and tell me if there is an increase or decrease shown as a percentage.
The figures fluctuate from month to month so they could be either an increase or decrease. There are over 300 entries so I can't go through each one adjusting the formula accordingly - this is why I need the formula to do the working out if it is up or down.
I am trying to do a spreadsheet that calculates the monthly rent from 9/1/14 through 1/1/15, then rent gets reduced from 2/15/14 through 1/1/16, then after that there will be an increase of 3% per year for each year until 8/2019.
View 1 Replies View RelatedI have totals in d18 and e18 and need to find the percentage increase or decrease between the 2. E18 is last year's value and D18 is this year's value. Which formula will give me what I am looking for:
(D18-E18)/D18 or (D18-E18)/E18
how to make a number automatically increase by a percentage at a certain interval.
For example, 1-12 need to be 3% of 100, so, 3. Then, from 13-24 need to be 3.5% of 100, and so on. Does anyone know how to do this?
What I need is a worksheet which will generate fields from a set of variables (similar to a loan amortization schedule).
I don't know how to write the field code to include the annual percentage rate increase based on that additional input variable.
Input variables would be:
starting rate: (ex: 8¢/kilowatt hour)
starting date: (ex: July 2013)
average kw hours/month: (ex: 1062.5 kw hours)
annual rate increase: (ex: 3% *default 0%)
years to display: (ex: 25 years, *shown in months in fields below)
service months per year: (ex: 12 *default 12)
[code].....
So, data fields below the variables would be blank until these are entered.
Assume I would protect the sheet to avoid messing it up.
this would generate a chart showing rates over time from the fields below.
Also it would generate fields in a summary area to show the rate per year for future years.
Secondary, if there were a way to input actual usage and rates from specific months in the past, that would be useful but not part of this forecast model.
The goal of this model is to forecast electrical costs for residential power users compared to independent solar power generation to 25 years forward.
I want to make this because I am skeptical of the advertised savings that solar installers use to convince clients that their return on investment is so high. I believe their data to be greatly inflated projections.
Using this in comparison with other data such as inflation and wages will allow me to get a very good economic picture of the future of independent solar energy generation and its impact on the average home owner.
Looking for a formula to show percentage increase of a figure.
Cell A1 is £45,000
Cell A2 is £51,000
Cell A3 ANSWER result shown as a percentage increase.
I have sales numbers which is in the form of a running total dollar amount and I would like to keep track of the average increase in dollars.
So basiclly if the Jan total is $100 in column a, the Feb total is $150 in column b, and the March total is $200 in column c. I would like a formula that will tell me that the average increase in dollars is $50.
If a cell is not blank, then increase that amount by a percentage identified in another cell and display the value only without any formalas in a new cell. To this end I wrote this IF statement:
=IF(I2>0,CP9=(CA9*I2/100)+CA9,CP9="")
Observation: I see a FALSE in CS9 where this IF statement exists, however, CP9 does not display the required value.
I have two rows of data representing marks out of different amounts.
E.g.
A1=23, A2=14, A3=50 etc.
B1=12, B2=10, B3=32 etc.
So, the first mark is 12 out of 23, the second is 10 out of 14 and so on. I have a large number of these for at least 250 people. Is there a simple formula that will immediately work out the average percentage for all of the marks above? If so, will it still work if some marks are missing?
I have a column of percentages, how do I get an average % rate at the end of my column?
View 7 Replies View RelatedI want to get an Average % on an HLookup. This value should come from a range with weekdays. What i need is an average of all values on monday.
=AVERAGE(HLOOKUP($H$18;Billrun!$13:$18;2;FALSE)
This i what i have, and it keeps returning 0%. I have a feeling it includes all empty values...
I have 6 different sections of questions, each section having a final average score between 1 and 5.
I would like to somehow create a percentage weighting on each of these sections and then have a final score accross all section, taking into account this weighting?
I have an excel spread sheet with columns of dates I am trying to get an average formula that counts dates less than a year old as 1 and blank cells and dates greater than a year old as 0 and then gives me a percentage. For example I have a column with 10 dates all less than 1 year old I would get 100% but if I had a column with 8 dates less than a year old and 1 dates older than a year, and 1 blank cell, I would get 80%
Is this possible at all, or do I have to calculate the percentage for each column individually.
I have a test due in the morning, and I really need this question answered ASAP, if anyone could. I need to create an IF formula for this situation: the standard Mhz is 500. Give 55.00 for that standard. But for every increase of of Mhz, give 25.00 per 100 increase.
View 2 Replies View RelatedI have a workbook that I've built for a project. I've attached a sample workbook. What I'm trying to do, for the entire sheet or workbook if possible, is turn any Cell with a percentage of 30% to 49% yellow and any cell with a percentage of 50% or more Red. I would also like to move the ID's of the variable cells, for example Id number 9922, to the cells beside the description of the rows, Affected would be an example, if the information contained in the same row as the ID meets with a set of variables.
For example I only want the ID's moved if they correspond with IDsub 1-25. One more thing, the people who will be using this spreadsheet will be copying data from a website when it is imported it does not insert the values as numbers. I would like to format the cells, in example workbook they would be any of the cells labeled ID IDsub Variable or Number, so that anything put in that cell will automatically be converted to a number.
I should also probably add that the formatting will be done on approximately 80 rows a sheet with 47 sheets.
calculating the percentage of a percentage and writing the formula for excel.
There are 295 people in a room, of the 295, 75 or 25% are mothers. (I know how to calculate 25% - 75/295 = 25.42) of the 75 mothers 35 have 3 children, 32 have 2 children and 10 have 1 child.
35 is what percent of 25%
32 is what percent of 25%
10 is what percent of 25%
E11 through E24 contains numbers and a few errors (#N/A) that need to persist (the errors need to show).
E10 needs to show the average of the numbers that are in E11 through E24, and just ignore the errors.
I have many columns like that - where the errors need to show and I need to show an average of the number/values that do appear, ignoring the errors.
i have two columns...a and b (a w/ names, and b w/grades). then i have the table lookup with names and grades all mixed up for many rows. i want to be able to average the grades with appropriate names.
=average(vlookup(name, table, column, false))?? i don't get it to work and how can i specify the grade to average?
Having an issue with copying down.
Workbook 1 has data vertical
Workbook 2 has data horizontal
I need the formula in Workbook 1 to pull from the respective date in workbook 2, or just a simple formula increasing the column by 1 for each row.My issue is that when i copy down, the column never increases, it stays on the same one.Example is attached.
if it is possible to increase one cell by 1 when the date was changed in another cell. I installed the code that was given to me and it worked perfectly, thanks agin JB and royuk, UNTIL the cell that was to increase by 1 was locked and the sheet protected.
The date cell is not locked.
I have attached a spreadsheet, in which I have highlighted the following cells (I2, J2, G31 and I31)
View 7 Replies View RelatedI'm dealing with the following problem. Say I have a set af values:
A B
1 567
2 546
3 567
4 554
5 572
6 543
I can easily determine the average of the values in column B (=AVERAGE(B1:B6)) But I also want to know if the average is increasing or decreasing without making a chart and trendline. Concrete: I want the cell with average (say B7) to turn green when the trendline has a positive growth and red when negative.