I want to calculate % increase with time related fields
Field A1 = 01:53 (formatted custom as mm:ss) happy to format some other way
Field A2 = 02:08 as above
I want to know the % increase. The correct answer is 13.27% , as 01:53 = 113 seconds and 02:08 is 128 seconds and 128/113 = 1.1327 so 13.27%
I have a sheet comprising of 4 columns, laid out like the below ;
A4 = Equipment
C4 = Cost
E4 = Revenue
G4 = Gross Profit
I require to enter a percentage into the gross profit column, and for this to interact with the cost column, then for the revenue column to return the total of the cost including the profit.
From below data I want a formula to know how many pecentage it dropped and how many percentage it was increased.
ABPercentage431112222207106141135447
I'm doing research with a professor at the University of Florida. This is my first time using Excel to any extent, so I need everything from the ground up!
I have the housing values for each of the 50 states from 1975 to 2006. I need to analyze each state individually to see if there were any points during that 26 year span when housing values increased by more than 20%. I need to know when this increase started and when values peaked and began to fall. I could do this manually, but I'm assuming that would take a while.
Is there a simple way to do this in excel? A macro, or a UDF (I have no clue about either of them by the way).
The 50 states are listed in a column and the rows next to each state having housing values for the 26 years. ( I don't know if that is relevant).
I just can't figure out how to create a formula to figure out the average Percentage increase over two figures.
For example:
Amount 1 Amount 2
$17,330,000$20,150,000
Would I use the average function?
I need to do the following:
If column X is less then < £1000 will have a 15% increase, those less than < £1500 a 12 % increase and any figure greater than > £1500 a 10% increase.
I could easily do this using a case statment using VBA, but im not allowed, any idea of a formulae that would do it?
How do I change numerous numbers in several different columns by a constant amount? example reduce each number in each of these columns by 50%.
View 9 Replies View RelatedI need a formula that will tell me how many minutes/hours are needed to hit a certain percentage.
For example, I need to do 60% of my time doing one thing (Team), and 40% of my time doing another (Individual). So, I need to know, if I've spent 5.5 hours doing Team, and 4 hours doing Individual, I need to know that I need to do .5 hours to hit the correct split.
I can't figure out what formula to use that will increase the current total to best figure out how many minutes I'll need to do either Team or Individual to hit the 60/40 split. It doesn't need to actually tell me 15 minutes, etc, but .25 would be fine (everything is done in .25 increments).
I need a formula that can work out a percentage increase or decrease from cell J2 to L2.
J2 is the current data with L2 being the previous data - so the formula would compare J2 with L2 and tell me if there is an increase or decrease shown as a percentage.
The figures fluctuate from month to month so they could be either an increase or decrease. There are over 300 entries so I can't go through each one adjusting the formula accordingly - this is why I need the formula to do the working out if it is up or down.
I am trying to do a spreadsheet that calculates the monthly rent from 9/1/14 through 1/1/15, then rent gets reduced from 2/15/14 through 1/1/16, then after that there will be an increase of 3% per year for each year until 8/2019.
View 1 Replies View RelatedI have totals in d18 and e18 and need to find the percentage increase or decrease between the 2. E18 is last year's value and D18 is this year's value. Which formula will give me what I am looking for:
(D18-E18)/D18 or (D18-E18)/E18
how to make a number automatically increase by a percentage at a certain interval.
For example, 1-12 need to be 3% of 100, so, 3. Then, from 13-24 need to be 3.5% of 100, and so on. Does anyone know how to do this?
What I need is a worksheet which will generate fields from a set of variables (similar to a loan amortization schedule).
I don't know how to write the field code to include the annual percentage rate increase based on that additional input variable.
Input variables would be:
starting rate: (ex: 8¢/kilowatt hour)
starting date: (ex: July 2013)
average kw hours/month: (ex: 1062.5 kw hours)
annual rate increase: (ex: 3% *default 0%)
years to display: (ex: 25 years, *shown in months in fields below)
service months per year: (ex: 12 *default 12)
[code].....
So, data fields below the variables would be blank until these are entered.
Assume I would protect the sheet to avoid messing it up.
this would generate a chart showing rates over time from the fields below.
Also it would generate fields in a summary area to show the rate per year for future years.
Secondary, if there were a way to input actual usage and rates from specific months in the past, that would be useful but not part of this forecast model.
The goal of this model is to forecast electrical costs for residential power users compared to independent solar power generation to 25 years forward.
I want to make this because I am skeptical of the advertised savings that solar installers use to convince clients that their return on investment is so high. I believe their data to be greatly inflated projections.
Using this in comparison with other data such as inflation and wages will allow me to get a very good economic picture of the future of independent solar energy generation and its impact on the average home owner.
Looking for a formula to show percentage increase of a figure.
Cell A1 is £45,000
Cell A2 is £51,000
Cell A3 ANSWER result shown as a percentage increase.
In the Excel sheet i have 2 tabs
1st tab name :Percentage
2nd tab name :Defects.
Need VBA Code for the below scenario :
In the Defects sheet it should perform the autofilter by selecting the Criteria as Severity as Critical and Status as Closed and finally it should take the count of visible cells and it should populate value in the sheet1 (Percentage sheet) in the Critical defects closed field .
Again it should perform the autofilter by selecting the criteria as severity as Critical and status should (New,open ,reopen,retest ,pending closure)and finallu it should take the count of visible cells and it should populate value in the percentage sheet in the Unresolved defects field.
Now percentage calculation should be performed between the Critical Defects closed and Unresolved Defects.
Here is the formula= Critical defects closedUnresolved Defects * 100.
How to perform this Scenario through VBA Macros.
Please find the attached sheet : sample.xls
I am trying to get my variance percentage to calculate correctly but I am struggling when it comes to one of the value being zero. It works fine for the below example when both the variance and last year figures a zero.
Last Year This Year Variance Percetage
0 0 0 0.00% IF(Last Year=0, "",Variance/Last Year)
0 100 100 0.00% This should be 100%
In the attached table the fees generated are on a sliding scale and the total is the fee generated within these ranges
I would like a formula in b10 to give me the value based on the total sale figure, i.e. 80.00. I've searched the board and tried some very long "if" statements and "lookup" table but to no avail.
Is there a formula I could use to calculate the desired value, preferable using cell references and not the actual values.
Sale Value
% Fee
Upto 2000
1%
2001 to 3000
1.50%
[Code] ........
I am a Safety representative and on a monthly basis I have to check for seat belt usage. I can not, for the life of me, figure this out.
I have attached an example. In the example out of 22 vehicles there were 2 individuals not wearing seat belts. So cell J4 should be 91%
I can calculate % not wearing with [=sum(D4:E4,H4:I4)/SUM(B4:I4)]
but I want to show % wearing.
This is so simple, yet Excel doesn't give the correct value. So, here you go, I only have 2 Cells and 2 Labels. One Label for one Number and the other Label for the other Number.
For the Pie Chart I chose Cells:
Cell B36 with the number $54288
Cell B39 with the number $166113
By simply viewing this one can see one of the Percentages should be around 33% and the other 66%. However, Excel gives it a Percentage of 25% and 75%.
How can I get the correct values?
i am having a hard time in my microsoft excel class
for the life of me i cannot think of a formula to answer the question below
every time i type in =(c3)-25-80% i get the wrong answer
i know there has to be a different formula
Cost of visit= $113.00
Q=Your have a co-payment of $25.00 and the insurance will pay 80% of the remaining cost. Create a formula for the visit that will calculate the total amount you will have to pay.
I have a percentage calculation that I need to ensure excel does not round up the last digit.
My calculation is 2463000(cell:I13) divided by 257000(cell: I14+I15)
Excel calculates this value to be 0.958365759
However I need it to display and re-use only 0.9583657 as my calculation has to be precise to 7 decimal places.
If I use the formula =ROUND(I13/SUM(I14+I15),7) then excel returns the value 0.9583658 - it rounds the last digit up.
I have tried to use the option "Set precision as displayed" and set my decimal places to 7 but this still sees my 7th digit rounded up.
How do I set it so the 7th digit is not rounded up.
My original formula is =IF(AND((L3+L8+L13)<=O3,(L3+L8+L13+L18)>O3),((O3-(L3+L8+L13))*I18/L18))
I have updated it to be =IF(AND((L3+L8+L13)<=O3,(L3+L8+L13+L18)>O3),((O3-(L3+L8+L13))*(ROUND(I18/L18,7))))
If a cell is not blank, then increase that amount by a percentage identified in another cell and display the value only without any formalas in a new cell. To this end I wrote this IF statement:
=IF(I2>0,CP9=(CA9*I2/100)+CA9,CP9="")
Observation: I see a FALSE in CS9 where this IF statement exists, however, CP9 does not display the required value.
I am building a conversion calculator on a userform. There is a textbox I've named "UserPctOff" where the user enters their value. I've got a label that I'm using to record the converted value. I keep getting Type 13 Mismatch error.
Here is my code.
Private Sub UserPctOff_AfterUpdate()
UserPctOff = Format(UserPctOff.Value / 100, " Percent")
LabelMDRate = UserPctOff.Value / (1 - UserPctOff.Value)
End Sub
I have 4 distinct columns.
Adm Date Adm Time Trans Date Trans Time
1/16/2014 937 1/16/2014 1045
1/1/2014 121 1/1/2014 121
1/14/2014 800 1/11/2014 735
1/30/2014 100 1/30/2014 205
1/13/2014 800 1/12/2014 1202
I would like to calculate the difference (# hours spanned from the dates shown). Unfortunately when we transfer the data the COLON is dropped from MILITARY TIME so I am having problems in the calculation. This is also made more difficult as some of the calculates span over two dates.
I am having difficulty finding information on coding my spin button on a user form. I searched and haven't found any information. I need to do is code a spin button to increase or decrease by 1 each time it is clicked up or down. I would like it to populate to a text box on my form if that is possible.
View 3 Replies View RelatedI have a test due in the morning, and I really need this question answered ASAP, if anyone could. I need to create an IF formula for this situation: the standard Mhz is 500. Give 55.00 for that standard. But for every increase of of Mhz, give 25.00 per 100 increase.
View 2 Replies View RelatedNeed a point in the right direction with this one! I want to calculate the difference between two time values, the problem is there two different formats as below:-
1) 520.00 - this is a number format
2) 500:00:00 - this is a time format HHH MM SS
What could I use to show I have a 20.00 hour difference???
I'm creating a spreadsheet were I need to take away time from each other to get a percentage for example
10:00:00 (A1)
take away 01:00:00 (B2)
Would give a percentage of 90% overall. But if I use the formula A1-B2 I get the answer 37.50%
i need to total a range of cells, however, these contain time values; hh:mm:ss. it shows me the total when all cells are highlighted. but =sum() doesn't work.
View 2 Replies View RelatedI have been burning brain cells trying to figure this out.
I get these numbers from an online source and they come in like this:
A B C D E
1/1/0912:01AM02:40AM11:18AM07:55PM
The times do not come in as times...when I format the cell to time it doesnt change...that is my first problem.
What I would need to do to these times is: take B and C and find what time is in the middle of them and put that in a different column.
This mess will also need to be plotted on a chart with time by the minute for one day as the X axis. In my example I drew lines on the chart to show what I mean....the blue lines I dont want charted...I use those to find the time in the middle.