I have a workbook that archives by date and is saved for 1 month at a time. At the end of the month, all the archived workbooks are moved to another location and are no longer needed.
The problem I am having is I don't know how to break the link between the master and all the saved workbooks. So when I open the master it is looking for the old workbooks in the folder location and they do not exist. How do I break this link?
I have an unwanted link and I can't remove it. I have tried through the Edit Links dialog box, searched for [ in formulas throughout the workbook and gone searching manually for the reference but to no avail.
View 9 Replies View RelatedIs there a simple code I can add to the end of my macro that will break all existing links in the active workbook?
View 9 Replies View RelatedI'm looking for syntax to break all links in a workbook using VBA. I've found the below through independent research but I'm receiving a type mismatch error.
Code:
Sub BreakLinks()
'Macro Purpose: Break all links in the active workbook
Dim vLinks As Variant
[Code].....
I've got a file that is currently linked to two other files. The links are summed in the cell as below:
='[Book1.xls]Funding and Interest'!D$17+'[Book2.xls]Funding and Interest'!D$17...and so on.
I want to get rid of the link to Book1, so I'd zeroed the values in Book1 and my plan was then to Break the links to this, leaving zeros and the links that I want, but because both files are linked in the same cell (the same nested SUM), when I go to Edit, Break Links, it breaks the links to both files, even though I only select one form the list.
Somehwere in a review of your book, it referred to an add-in that attempts to break all links to a workbook. I looked on the site (microsoft) with the provided URL but could not find it. Is it still there? Does it work for EXCEL 2002?
View 4 Replies View RelatedI copied 2 worksheets from one file to another and went in to "Edit Links" and changed the source to itself rather than the original file which took away those links in the cells that the original file was present in, but it still gives me a dialogue when opening the file that links to the original file. I go back to "Edit Links" and press "Break Link" but it doesn't seem to remove the link to the original file. If I click on "Connections", none are present. I clicked on "Startup Prompt" and set it so that it wouldn't annoy me with the prompt any more, but I'd ideally like to not have any reference to the original file.
View 3 Replies View RelatedHow can I break the link between a chart and a worksheet? If I change the name of the worksheet and try to use the chart I got an error that the current worksheet is the one that the chart is related to. I tried changing the source from the links option in the bar - no effect. I checked conditional formatting - also no effect. How can I break all existing links between the sheet and the macro?
View 2 Replies View RelatedLast week I copied a worksheet from one spreadsheet into another, and have since been working from the new one. When I open the file I get a message box asking if I want to Update links from the other workbook. But I've deleted all named ranges, formulae, shapes, everything that could possibly link to the other workbook. I've also (in my frustration) completely deleted the sheet that was originally copied and re-made it from scratch. But it STILL comes up with this update box. In Excel's Help it says to go to Edit/Links and press Break Link, which I have tried but it doesn't do a thing. The link is still sitting there in the display box in the Links window - it says that the Type is Worksheet, I don't know if this makes any difference that it's not a formula or anything?
Also, in complete desperation when it wasn't deleting the link, I changed the source to a random file, so it now comes up with an error in updating (which it obviously would) however this doesn't have any effect on my file because as far as I can tell it no longer has links to the other file! I'm tempted to just go to the option that says don't show the Update prompt on opening (the file is to be handed in as coursework on Wednesday) but this doesn't solve the problem, only bypasses it! Each time I made a major change (e.g. recreating the copied worksheet, changing the source) I saved the file under a different name, so I have all old copies just incase I've completely messed it up!
I am new in VBA, but I have a short procedure to break all external links in the currently active workbook.Is there any option to firstly update all external links and only then break them?
Sub BreakLinks()
Dim Links As Variant
Dim i As Integer
With ActiveWorkbook
Links = .LinkSources(xlExcelLinks)
If Not IsEmpty(Links) Then
For i = 1 To UBound(Links)
[Code]....
I'im using an index - match - match formula with links to an external file.
Everything works fine until I close the source workbook. At that moment the liks break. The error I'm getting is #REF!.
I suspect the reason is that the source data are in form of an official table. I tried some formulas with data in the same workbook but outside the table and they keep working after the source file is closed.
I really want to keep the source data in a form of an official excel table.
I have several hundred workbooks which are linked to a master workbook from where the workbooks draw their information. Now I would like to break all the links in all of the several hundred workbooks to this master workbook and retain the information. Is this possible without having to open each workbook individually and break the links via the 'edit links' option?
View 1 Replies View RelatedAll of the sudden, I've started having issues on one PC with Excel opening CSV files.
I work with these files every day and they work on other computers.
The problem is that if the field value starts with a dash, Excel will not show any records before that. Meaning, if there is a record on line 50000 that starts with a dash, it will not show the previous 49000 records.
I can open the file in Notepad++ and find all '- and replace it with ' and it will work fine. But I have hundreds of files.
This just started. I'm using using Office 2010 x64. I'm tempted to get Office 2013 to see if this will resolve it as something has obviously went wrong.
In the past, I would open the CSV files just like any Excel file and NEVER any issues. I would do this with multiple files each day but even the file that I use to not have issues with in the past is now an issue if it has a dash in a field.
Last monday I clicked on my quick launch icon for my time card, which is in excel. It opened up, but I got an error message saying that excel had an error, send report or don't send report. Closed everthing out and clicked on the icon again, but this time excel oppend but the file did not. I get just a blank (don't know what to call it) spreadsheet. There are no cells to enter anything in. I do get the "File, Edit, View, and so on" at the top. I can click on File than Open and browes for the file and open it that way, but I can't open any Excel file by double clicking it in explorer.
View 10 Replies View RelatedI have 2000 excel files all saved as different names.
The Names of the the files are all from greyhound racing results, here are some examples.
4th January 2008 7.30
4th January 2008 7.45
So we have the date of the race and the time of the race.
In these 2000 files there is certian information I want to retrieve into 1 excel sheet to run analisis on them.
So cell A1 in every file is always the same and may contain a number I need.There are several numbers I want to retrieve from each file but I want it to display in 1 sheet, now I can do this manually and may have to but lets see.
I have been having problems lately with excel files on Network drives. I have one file that I created on 11/12/2012. However, on Friday that file showed it had been modified by myself on 11/13/2012. I did not do this. As a note, this file contains macros based on a button that is clicked from a worksheet.
I then copied data from this worksheet into another file, creating a link that I did not know was there with the worksheet and the macro. From the first workbook, I also copied in data collection from two other worksheets, also I believe with a link to the first workbook.
I did a test on the first file this morning and found out you can open a file, make no changes, and close the file. Excel will ask you to save the file. If you say Yes, the file will show being modified with today's date and your userid, even though nothing really changed.
What I am actually trying to find out is that can the original file be altered somehow that will automatically update the linked file? Or, when I open the linked file, do I have to say "YES", I want the updates before the linked file is updated?
There were some questions as to how a value showed up in the link file (or actually ended up being removed) and when I looked at the original file it was also removed. We checked on stability across the network drive but found it to be okay, now we are looking at the link issue.
This workbook contains links to other data sources.
*If you update the links, Excel will attempt to retrieve the latest data.
*If you don't update the links, Excel will use the previous information.
Note that data links can be used to access and share confidential information without permission and possibly perform other harmful actions. Do not update the links if you do not trust the source of this workbook.
I've stopped trying to rectify the situation and just click on cancel. So does everyone else. Big mistake. If there is a file that changes from time to time, and you're relying on a link to it to make your data correct, and some one moves or removes it! you get the above message. But you have no idea it's your very important file that has been deleted or moved. And Excel as the message says, uses the last data it had access to.
Is there a way to force Excel to display the #N/A error for the broken link instead of telling the lie? Well really, if the file’s been deleted or moved, Excel has no idea what the true value of the "Link" is and is lying when it puts up that last known value and really doesn't tell you except for that opening message.
Very frustrating, the Bill Of Material was moved and then changed, and my Excel file reported the old value just like that.
I've got a huge file with lots of pages and all sorts of people do lots of things including making links to files that after a while get moved or deleted. I can't chase them all down.
So, is there a way to force Excel to "Crash" and put up an error message in the cell where the link is supposed to be?
I want to link data between two files, which are always in the same position relative to each other, but can be copied to other locations. Here is an example:
D:Job 1SourceJob Info.xls
D:Job 1SlaveClient Form.xls
Cell B1 in Client Form.xls refers to Cell A1 in Job Info.xls. This link is created when both files are open. When Job Info.xls is closed, the reference in Client Form changes to 'D:Job 1Source[Job Info.xls]Sheet1'!$A$1.
Then, I copy and save Job 1 as Job 2. Thus, the second set of folders are: ....
I am working on a file that has multiple worksheets with many links, lookups and formulas; some between the worksheets and some external to another Excel file. The plan is to use this file as a template and copy it over and over with new names. Once I save the file as a new name in a new folder on my network, will I lose all these links, lookups and formulas? Or is there a way to maintain the links or do a global change of the formulas (i.e., the original file name is "TEMPLATE" and the new file name is "PROJECT!1")?
View 2 Replies View RelatedWe use Excel 2003 and 2007 to track labor data for a field service company. The field tech's complete daily forms and the office staff copy/paste this data into weekly billing worksheets. They use naming conventions to show the jobs and dates in the file name (Daily Labor - Job1 - 031308.xls and Weekly Labor - week ending 3-16.xls. What I would like to do is link the daily data to the weekly forms as they come in. Is there some way to do this when the job names and the dates are always different? Can I tell Excel to expect data files based on the naming conventions as in the Weekly is named "Weekly Labor - Week Ending 3-16.xls so data files named LaborJob1310.csv, laborjob1311.csv would automatically update the weekly sheet? I can put these in a folder and link them, but I don't know how to provide an easy way to do this for the upcoming week.
View 4 Replies View RelatedI have a master workbook (that I will call 'A') with a number of links to other workbooks ('B' to 'Z'). 'A' is designed to collate and display the data held in workbooks 'B' to 'Z'. The links all work fine until the 'B' to 'Z' workbooks are updated with new data, at which point, the links break with a "Error: source not found" error.
This is caused by the process by which we update the 'B' to 'Z' workbooks. We have to delete them, and replace them with new files, that have the same name.
Is there any VBA code or something that I could run that will update the links to pick up the new files?
I'm trying to set up a macro so that: in column C I will see the current (old) links being used by the workbookin column D I will input the new links I want to use in the workbookthe macro will open all those files in column Dthe macro will then replace the current (old) links with those listed in column D
I have the following so far, but something doesn't seem to be working - it gets as far as opening the first new file but doesn't open any others and doesn't change any links (although I've tested the part to change links separately and this seemed to work ok).
Sub linked_sheets()
Dim LinkedBooks As Variant
Dim i As Long
LinkedBooks = ThisWorkbook.LinkSources()
For i = LBound(LinkedBooks) To UBound(LinkedBooks)
Cells(i + 3, 3) = LinkedBooks(i)
[Code] ..........
I have a large spreadsheet that has links to CSV files. Every month I need to create a new folder and put the CSV files into that folder, all the CSV files from month to month have the same name for each worksheet.
I'm trying to do Find and replace on the Folder name within the links to change say, February to March so I can just add the CSV files for each month and the spreadsheet will link to the new CSV file in the folder.
I have even tried adding all the February CSV's to the March folder so that when I overwrite the CSV's it will update the master spreadsheet, but it keeps asking me where to look for the folder.
Here is an example of a link:
='\FileservermsbilBRANCH REPORTSBM ReportsFebruary[TItemToDispense@40186 Export Dispensed Item Data-00.CSV]TItemToDispense@40186 Export Di'!BM2
As you can see the folder is named February within the link and I need to replace it with March.
I've found countless, very useful macros that do 1/3 of what i need. My needs:
1) A macro to look in a set network folder, and generate a list of Excel files, and display them (1 per row, just the file name if possible)
2) Each file name is a hyperlink to open that sheet
3) A macro to look at the file listed above, then list in the column B a value from a set cell. So it would ideally output:
1| RH0018.xls A1CellValue
2| RH0019.xls A1CellValue
3| RH0020.xls A1CellValue
I and my organization have many files created using Excel 2003. I have now upgraded to Excel 2007 and soon I discovered a huge problem.
- When opening a file using Excel 2007 that was created with Excel 2003 the links in that file is automatically updated even though I get the edit links dialog and choose not to update.
After searching for a solution on the Internet I realize that this is a problem that exist when Excel opens a file created in an earlier version. Microsoft has no solution.
I need to be in control of which links that are updated and not.
Going back to excel 2003 is not an option. Saving the source files in Excel 2007 is not an option.
I have links between Excel files and Word files. I use these files for multiple projects. When I copy them and paste them to a new folder the new files would be linked together. For some reason this has stopped. Now when I copy, the Word file has links to the original document, not to the copied document.
View 7 Replies View RelatedI am trying to open set of excel files to fetch data starting from a master excel file where the links are given using a loop. Some of files given as links are either absent or the link is wrong.
* What is the syntax to find if the link is correct/present
* What is the syntax to find if the file is present in specified location
* What is the syntax to find if the file is password protected to open
* I use error handler to resume the next statement if OPEN statement fails.It works fine inside the loop only for first two files.
For example if the third link is errorneous the error handler fails and RUN TIME ERROR occurs.
The code which you provided works fine no problem for a page break. I need to run the macro for the page break by asking the input file for page break to be done.
For Example, If excel filename "A" contain the code which you have given need to ask to input the filename "B" and process need to be done in file "B".
I have added some code to your code which you provided but it gives error message "1004" "Method 'Range' of object '_Application' failed" at following line :
Set rng = oExcel.Range(Cells(2, 2), Cells(Rows.Count, 2).End(xlUp))
I just reinstalled windows (XP) and Office 2003, SP3.
When entering text in a column and if it was larger than the current column, it used to just display into the next column unless there was data in that column.
Now, it just displays a few letter from the end of the first word. How can I change this back as default?
I am submitting a book CSV file to my website. However, the website will not accept any cell that contains more than 80 characters. The error states the following. "WARNING: Title should be less than or equal to 80 chars; your Title was truncated to 80 chars" repeated 13 times.
View 2 Replies View Related
