Code Runs Over And Over Again And Updating Pivat Table

Aug 28, 2007

I have some code sat in worksheet_change (or worksheet_pivotupdate):

If ActiveSheet.PivotTables("PivotTable2").PivotFields("Area").CurrentPage = "(All)" Then
ActiveSheet.PivotTables("PivotTable3").PivotFields("Area").CurrentPage = "(All)"
End If
If ActiveSheet.PivotTables("PivotTable2").PivotFields("Area").CurrentPage = "London & Essex" Then
ActiveSheet.PivotTables("PivotTable3").PivotFields("Area").CurrentPage = "London & Essex"
End If

The problem is that this code runs over and over again, as each time the pivot table updates, it constitutes another update, and so on and so on....

View 3 Replies


ADVERTISEMENT

Calculations To Manual Before My Code Runs And Set It Back To Auto When My Code Is Done Running

May 12, 2009

I am dealing with several very large spreadsheets using VBA to do various things. I found that my code worked well, but was taking a long time to run. The biggest time consumer was my use of the AutoFilter features. I have since turned calculations to manual before my code runs and set it back to auto when my code is done running. What are the potential consequences of my turning calculations to manual and then back to auto?

View 2 Replies View Related

Circular Reference When Code Runs

Sep 4, 2009

I'm at my wits end trying to work out why I'm getting a circular reference when this code runs:

Private Sub TextBox1_Change()
Cells(Rows.Count, "K").End(xlUp).Offset(1).Value = Range(TextBox1.LinkedCell).Value
With Range("K5").Resize(40, 1)
.FormulaR1C1 = "=OFFSET(" & Cells(Rows.Count, "K").End(xlUp).Address(True, True, xlR1C1) & ",-(ROW(RC)-ROW(R5C)+1),0,1,1)"
.Value = .Value
End With
End Sub

The circular reference cell is K29. I have an "X" in K46 after which all the values in TextBox1 are copied.

View 9 Replies View Related

GIF Not Visible On UserForm While Code Runs

Aug 8, 2006

I have some code to put a GIF animation into a web browser on a userform. This works fine - on its own. However, once the GIF has loaded I want to run a whole bunch of code in the background. If I run the code all at once, the userform appears but the picture doest show - but when I place a breakpoint between loading the userform and the main sub routine of my code - the GIF loads and the animation is shown all the time my code is running in the backgorund.

View 4 Replies View Related

Calculation Code For Calculator Runs Slow

Oct 1, 2006

I am making a small push button calculator to enter data into a textbox on a userform in an add-in file and this works fairly slowly. I am trying to concatenate a list of numbers in a textbox that simulates a calculator screen when entering numbers.

Private Sub CommandButton6_Click()
Dim Val
Val = "6"
Dim valand As Range
Set valand = ThisWorkbook.Worksheets("Stageing").Range("K65536").End(xlUp).Offset(1, 0)
valand = Val
Dim A As Range, B, C, d, E, F, G, H, I, J
Set A = ThisWorkbook.Worksheets("Stageing").Range("K2")
Set B = A.Offset(1, 0)
Set C = B.Offset(1, 0)
Set d = C.Offset(1, 0)
Set E = d.Offset(1, 0)
Set F = E.Offset(1, 0)
Set G = F.Offset(1, 0)
Set H = G.Offset(1, 0)
Set I = H.Offset(1, 0)
Set J = I.Offset(1, 0)
TextBox1.Value = A & B & C & d & E & F & G & H & I
End Sub

View 4 Replies View Related

Hide Code Actions As Macro Runs

Dec 8, 2006

I have written a macro which references to several different sheets and cells therein. The macro is assigned to a command button on 'Sheet 1'. When I click the command button, the screen flickers and the user can see the macro running all the commands I have written. Is there a way of stopping this - maybe replacing it with a static screen view whilst the macro runs?

View 3 Replies View Related

Code To UNPROTECT Then PROTECT Workbook When Macro Runs

Jul 24, 2014

Okay, I have this code and it works very well - but it only works if my WORKBOOK is unprotected. I know how to Unprotect then Protect an ActiveSheet, but I can't figure out how to Unprotect then Protect my workbook when the macro runs..

Sub BLM_RENAME_SHEET()
Dim WS As Worksheet
Application.ScreenUpdating = False
For Each WS In ActiveWindow.SelectedSheets

[Code] ......

View 9 Replies View Related

Code Runs When I Hide Rows Or Delete Cells

Aug 2, 2008

So i don't have any events that i know of that should trigger my macros to run. But everytime i delete a cell, or hide rows, it seems all my code/macros just auto run. And i had a few times when i hid the rows, the code would start, and then my excel application would crash.

View 4 Replies View Related

Code For Button That Runs Macros Dependent Upon Which Boxes Are Checked?

May 16, 2014

See attached file illustrating exactly what I'm trying to do.

I won't repeat the exact same things I wrote in the file, but the Summary is that I need to first make such that only certain check boxes can checked at any one time, then make the command button run certain macro(s) depending on which boxes are checked.

View 8 Replies View Related

Updating PIVOT Table

Mar 9, 2009

I have created a dashboard based on a number of pivot tables. (Using GETPIVOTDATA tags)

One of the fields in the Dash tab is Week which is a drop down menu of 1-13. (GLA Dash C3)

I have two pivot tables in seperate tabs. (BottomQuartile1 and BottomQuartile2) both have Week as Report Filter.

At the moment when I change the week in Dash from 4 to 5 i have to manually go into the two BottomQuartile tabs and alter the week to match.

Is there anyway I can automate this process so that when i update the week in Dash it will update the Week in the other two tabs?

View 9 Replies View Related

Updating Cell From Table

Mar 10, 2009

I'm using Excel 2007 to keep a database of daily settlements for financial futures as well as a variety of studies for these daily values. I want to have one page that I can print every morning with the relevent information for the day. So what i'm trying to figure out is how to make the cell on my "Settlements" page always read the last cell of my data column or find the average of the last five cells, for example.

View 9 Replies View Related

League Table Not Updating Properly

Jan 22, 2010

My league table just stopped adding the scores up as of week 22. prior to that they worked fine. I input scores in the "Our Players" sheet, per player per week.... simple. but like i said, as of Week 22, it just inputs that specific weeks scores. See attached file.

View 4 Replies View Related

Refresh Pivot Table Without Updating Filter?

Apr 23, 2014

I have a macro to refresh all pivottables in my workbook. Each pivottable source from the same data pool - in addition I have a filter on each pivottable. Is there a way to fix this filter, such that once the source data is updated, the filter doesn't change? Or to only refresh the "data" in the pivottable?

My code for refreshing all pivottables is given below.

Dim pvt As PivotTable
Dim sh As Worksheet
Application.Calculation = xlManual
For Each sh In Worksheets
For Each pvt In sh.PivotTables
pvt.RefreshTable
Next pvt
Next sh
Calculate
Application.Calculation = xlAutomatic

View 2 Replies View Related

Updating Table - Points Accumulated / Redeemed

May 10, 2013

I handle catering and marketing at my work, so naturally I track the sales of each customer and company. Right now I have each month on a separate tab and it works great for tracking MTD and YTD sales.

However, we recently implemented a Loyalty Points program to our catering customers where each dollar they spend = 1 LP and each LP = .02 discount on future catering when they have accumulated at least 500 LP.

What I really need to be able to do is find the easiest way to track not only what they spend, but also how many points they have accumulated, how much $ it equals, how many points they have redeemed, what their total LP balance is and $ amount balance. There has to be some way to create something that will either automatically update or a way that I can lock formulas into a cell next to pivot table. I don't really know what my options are, I am just above basic as far as using excel.

View 2 Replies View Related

Updating Value In Table Based On User Input

Feb 10, 2010

I have one sheet to act as a splash page for user input. The second sheet stores all relevant data. My goal is for the user to input a numerical value in a cell (or input box) and then click a submit button. The code for the macro should look at a cell on sheet 1 which displays the primary key of the row in the table on sheet

2. Based on that primary key, it should look to sheet 2 and then insert the value into the table in the correct row and column. The column headings are the days of the week, and the specific day the user is concerned with is also displayed on sheet 1.

Sheet 1:

A1 = Day of the week
A2 = Unique primary key
A3 = user input value

Sheet 2:
table
Rows=primary key (001 - 999)
Columns = days of the week (Monday - Friday)

example:
user inputs '5' on sheet 1 with 'Tuesday' and '007' selected in their respective cells. I would then like 5 to be copied to B7 (row 7 for 007 and column B for Tuesday).

View 2 Replies View Related

Updating Excel Table Values Into SAP Tables

Jul 23, 2012

I want to write a interface program using VB Macro, for updating the Excel Table values into SAP Tables. Is there any macro that can do this work?

View 4 Replies View Related

Excel 2007 :: Updating Cell Value On Table Through VBA?

Oct 27, 2013

I'm currently using Excel 2007 to get information from closed workbooks and updating my file.

First of all I create a table on selected range through "Insert table" command having something like this:

Then I have I piece of VBA code that tries to update every single cell of a column in this case it's updating %LD10 column:

But like you can see in first capture, the code updates every single cell with last value of variable fichero, having, at the end, the same value in whole column.

View 4 Replies View Related

VBA Pivot Table Not Updating With Filtered Field?

Oct 31, 2013

I've got a macro that adds new data to a sheet and updates an existing pivot table.

It's been working fine but ever since I've had to have two items in a field hidden it won't show any new data in the pivot table.

For example, the field firm name has two items hidden after the update any new firm names that weren't in the report before won't show up in the pivot table. The pivot table recognizes that it's part of the full data set but the checkboxes are all unchecked for the new firm names.

this is the code i"m using to update the pivot table:

'Update Pivottable
DSRWKB.Activate
DSRWKB.Sheets("Pivot").Activate

[Code].....

View 1 Replies View Related

Auto Updating MAX Function Utilizing Code?

Aug 5, 2013

It seemed to be working OK for the first hour I had my sheet open. I then noticed that a variation of the following Sub would not update unless I clicked somewhere else in the sheet or edited another non-included cell. It's like something is holding up Excel from running this function and updating the cells if b2 is greater than a3 then a3 will not update to = b2 immediately.

Private Sub Worksheet_Change(ByVal Target As Range)
If [b2] > [a3] Then [a3] = [b2]
End Sub

My data in column B is formula derived and that formula contains data that is live updated data brought in from DDE link.

My question is, should I setup this formula as part of a macro, instead of workbook code and attach an Application.Ontime function to ensure reliable execution? Could too many IF statements cause delays (about 100 of them currently in the code Private Sub Worksheet_Change(ByVal Target As Range))?

View 1 Replies View Related

Code To Move Data From Entry Table To Historical Table By Date

Mar 14, 2014

In the attachment you will see an example of what I am trying to accomplish. What I am trying to do is find VBA code that is either specific to this worksheet or in a macro. When the sheet is opened I enter a date in B2. I then enter data into A7, B7, and C7. What I would like to happen is when the data is entered into A7, B7, and C7 the sheet goes and finds the same date that I entered in B2 and copies that data from A7, B7, and C7 into F7, G7, and H7.

View 2 Replies View Related

Find Largest Invoice For Each Individual Identifying Code Number In The Table Without Using A Pivot Table

Sep 8, 2009

Data Table including-

List of Identifying Code Numbers for customer invoices

Multiple repetitions of individual Identifying Code Numbers in list

Various data in table range including Various Values of invoices from different dates for each repetion of Identifying Code Number.

- Wish to find largest invoice for each Individual Identifying Code Number in the table without using a pivot table.

i have tried combining Max and Large functions with Vlookups etc.

View 9 Replies View Related

Pivot Table Fields Expands Automatically When Updating Data (only Where Data Has Been Changed)

Jan 11, 2013

I have created a pivot table that is connected to an input sheet with data. The input sheet retrieves data automatically from a external source through an add-in to Excel. When updating data the fields expands, but only for the items which have been changed. I want the table to be updated automatically, but not the fields expand automatically. Is there any pivot options to prevent this problem?

It should be mentioned that the pivot table is not directly connected to the input sheet (which is updated from the external source), but from a "help-sheet" reflecting the input sheet with some additional columns. I use conditional formatting and name range in the pivot.

View 1 Replies View Related

Updating Date In Spreadsheet To Table In SQL In UK Date Format

Mar 26, 2014

I have a couple of columns, once edited need to update a table in SQL. This is my code

[Code] .....

However it is not taking UK date formats, it is assuming it is an american format, I get conversion of varchar data type to datetime results in an out-of-range value. What should I add to change the format? The format is in UK on the spreadsheet seemingly....

View 11 Replies View Related

VBA Code For Table Index

Apr 18, 2014

The below code is for pulling the titles of a series of tables into a worksheet and make it an index with link to each table. It worked when the title of the table is in one cell. However, the title now combined with project name and no long appear in e.g. A1 (before) now: it is merged in A1-BB1 (width of the table). How the below code could be modified to pull the title as the index page now?

Before: Table 02: XXXXX (Appear in A1)

Now: Project Complex: Table 02: XXXXX (Appear in A1-BB1 merged)

View 1 Replies View Related

VBA Runs In One Worksheet But Not Another

Dec 31, 2013

I wrote this VBA for a particular sheet:

Private Sub Worksheet_Change(ByVal Target As Range)
If Range("H5") = "Y" Then
Columns("L").EntireColumn.Hidden = True
Else
Columns("L").EntireColumn.Hidden = False
End If
End Sub

If the value of H5 is "Y" it hides column "L". It was working fine at one time. Then I wrote a bunch of UDF's at the workbook module level. I then went back it use the "hide" function and it didn't work.

I created a couple new worksheets in the same workbook, and the same VBA works fine on them. I created a copy of the "non-working" worksheet and added the VBA to the copied sheet and it fails to work.

If I create an error in the VBA (like: Column("L").EntireColumn.Hidden = True), I get an error when I change the (non-working) worksheet - so I know it is "trying to run", at least sort of.

View 6 Replies View Related

UDF #value! Error When VBA Runs

Jun 9, 2009

I have written a number of UDFs, which work fine in my spreadsheet. Two of these are more complex, and I'm having a few problems...

When I run any VBA routine (i.e. control passed to VB), these two UDFs return #VALUE! errors, but I can't see why. As these are Functions, I can't think of a way to test where the error is being generated, like I would in a Sub

When I return to Excel, any recalculation fixes the problem, which makes me think something is declared incorrectly. All named cell references relate to other VBA functions, calling the relevant row / column numbers, and I think these are all correct. I've tried removing AS INTEGER etc, to avoid type mismatches, and adding APPLICATION in front of worksheetfunction...

Function precedentStart(Target As Range) As Integer
Application.Volatile
With ThisWorkbook.Sheets("sheet1")
Dim splitPrecedent As Variant, lookupI As Integer, rowI As Integer

precedentStart = .Cells(Target.Row, colOrigStart).Value
splitPrecedent = Split(Target.Text, ",")

For i = LBound(splitPrecedent) To UBound(splitPrecedent)
rowI = WorksheetFunction.Match(splitPrecedent(i), .Range("schedRefs"), 0)
lookupI = .Cells(rowI, colAdjEnd).Value
If lookupI > precedentStart Then precedentStart = lookupI
Next i
End With
End Function

View 9 Replies View Related

Macro Only Runs Once

Nov 28, 2009

I can't seem to find an answer for this, but as an alternative, on Worksheet Activate the code runs and places a 1 in Range("A1") and therefore the next time the macro will not run.

This works fine for me, but just thinking if somebody who doesn't know why the one is in A1 and deletes it this macro will run again on sheet activate.

Private Sub Worksheet_Activate()
Dim LR As Long
Dim rng As Range

If Sheets("Charts").Range("A1").Value = 1 Then Exit Sub

LR = Sheets("POD").Cells(Rows.Count, "B").End(xlUp).Row

With Sheets("Charts")
.Range("I129").FormulaR1C1 = "=ROWS(R1C1:R[-128]C[-8])"
Set rng = .Range("A129").Resize(, 10)
rng.Copy rng.Resize(LR - 4)...............

View 9 Replies View Related

Find Out How Many Days To Code From One Table To Another

Nov 27, 2012

In the attached file I have two tables Table A illustrates the dates with start, end and code, Table B where I want the formulas that they would find how many days a code is in the month.

From F4:I37 I manually entered the day, I would calculate automatically.

esempio.zip

View 2 Replies View Related

Take First Digit From Code And Match To Table?

May 6, 2013

I have a table where

Then I have a set of codes that look like 1ZGM.BA, where the first number/letter relates to a chart

The chart contains approx. 34 different codes. numbers 1-8 and letters A-Z.

Codes look like 1ZGM.BA or A1QL.AA ...I'm only interested in the first character (does not matter if its a letter or number) to decode the product.

The chart looks like
1=Widget Smooth
2=Widget Rough
...and so on.

A=Widget Thick
B=Widget Thin
...and so on to letter Z.

I want to decode the first letter/number of a code that looks like 1ZGM.BA, where the 1 would mean the product is a smooth Widget, and A1QL.AA would equal Widget Thick product.

View 1 Replies View Related

Clean Up Pivot Table Code

Feb 19, 2013

Someone sent me a spreadsheet and asked me to clean up the code, which has been going pretty well, but they had this bit of code that is unfamliar to me and is quite bulky, I was wondering if there is a cleaner way to write this bit of code? This is only a very small portion of this particular code that they had in the workbook, so I would like to make it look a bit neater if at all possible.

Code:
ActiveSheet.PivotTables("PivotTable3").PivotFields("Annuity Type").Subtotals = _
Array(False, False, False, False, False, False, False, False, False, False, False, False)
ActiveSheet.PivotTables("PivotTable3").PivotFields("Category").Subtotals = _
Array(False, False, False, False, False, False, False, False, False, False, False, False)
ActiveSheet.PivotTables("PivotTable3").PivotFields("Product Series").Subtotals _
= Array(False, False, False, False, False, False, False, False, False, False, False, False _

[Code] ..........

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved