In sheet2 I've many numeric value.
In sheet1, A1: =Sheet2!B12 which returns 0 (zero) though B12 of sheet2 is the result of =sum(B1:B11) i.e 660. But if in sheet1 A1=Sheet2!D12 or any other cell in sheet2 instead of B12, A1 gives correct result. That means cell A1 itself is not a problem. I checked format of B12 which is number format.
in one column of my spreadsheet and it is returning the correct concatenation for the appropriate lines. However, I wish to have the column's cells return an answer of blank (" ") if B15, B16... etc is blank. In other words, at the moment, a correct answer would read something like '1810sd0000' C10 and B15 used, while an incorrect answer would still display '1810', but I want it to be a blank cell.
View 8 Replies View Relatedi want to match a cell data with a range of cells and if matches return the cell reference in another cell
View 3 Replies View RelatedI am trying to use vlookup so that when each site name is selected the relevant comments for that site are displayed.
I have a formula that is working, but it displays "0" if there is nothing in the cell. How do i get it to display a blank cell if thre is nothing in the reference cell.
this is the formula that i am using:
=IF($C$4="", "", IF($C$4="No Match", "", (VLOOKUP($C$4,Comments!$A$2:$U$295, 5,0))))
The site name appears in C4, and is selected from another sheet in the workbook.
i am trying to write some code to analyse a weightlifting movement that occurs 3 times. In particular there is a part of the macro where the user will input the start and end time of the movement using input boxes (to only select relevant data).
I want to then use a vlookup function to search for the start and end times in a range (1 column) in the time range and return the cell reference of these so i can select only these values and either create a graph or do more analysis. My code for this particular part so far looks like:
I have a column of data in column and a column of data in column F. The data in column F is exactly the same as column C but in a different order. Is there a way to match column C to Column F and return the matching cell references for column C & F in column G & H? i.e. If the word Help appears in C27 and F40, match the two words and return C27 in G27 AND F40 IN H27. All of the values are unique (I hope).
View 2 Replies View Relatedhow I would go about referencing a cell on another worksheet to return only the last so many characters from the data in that cell. EG:
Sheet 1 cell A3 contains the number (stored as text) 12345678
Sheet 1 cell A4 contains the number (stored as text) 98765432
On Sheet 2 I want to put into cell B2 5678 (the last four characters from the data in Sheet 1 A3.) Also on Sheet 2 I want to put into cell B3 5432.
Any other way of subtotaling data. I am an inventory analyst and do monthly/quarterly totals and averages of inventory used, and need a quick way to fill the blank cells with the part # that is below them, as shown below. I need the part #'s so I can then use CONCATENATE() and pull data from multiple time periods so the part #/year will match up down the page.
FILL P100012008360 FILL P100012009286 FILL P10001201072P10001718 FILL P1000220089,075
FILL P1000220091,124 FILL P1000220103,225 FILL P1000220116,375P1000219,799
FILL P10002PL20089,234 FILL P10002PL200912,150P10002PL21,384
I am creating a summary financial sheet in Excel 2003, Win XP. It needs to show the top 10 sales variances from a large data list, along with the associated department.
I can bring in the top 10 largest variances using Large(array,k), but because variances are either positive or negative, I'm not really showing the true top 10. To fix this I can use absolute values via Large(abs(array),k) but then I don't know how to convert the value back to its original sign (positive or negative).
If I could somehow get the cell reference that the Large(abs(array),k) formula points to, I could do something like this:
=Large(abs(array),k) * (Large Cell Reference/Large Cell Reference)
I'm afraid to use the address function because of duplicate sales variances. I often have several variances of with same value, so I might not truly be pulling the address that the large(abs(array),k) is pointing to.
What is the best way to reference a cell in another workbook and return the cell contents and the comment on that cell. I would like the comment to come across as a comment in the new workbook becuase the comment is actually a picture.
Hope this makes sense. I did find a macro through googling but I couldn't get it to work? I don't really want to copy and paste because eventually I have hundreds of sheets & thousands of cells to refer to.?
I am using Excel 2000
I am using the "IF" formula to pull in data into a forms section. I then save the forms section as a CSV file.
When the IF statement returns the "false" value, it is looking to pull over a "blank" cell. When that happems, a "0" pulls over. I tried to put a "" in the blank cell, but while the output of the formulaa looks "Blank" when I convert the tab to CSV, the output is a quote mark ".
I need the formula to display a real BLANK cell or something that acts like a blank cell
I'm trying to do several things. I have 6 columns (A:F) with column headers and 12 rows of data and not every cell has a number as its content. Some cells are blank. I have attached my file.
Using Row 2 as my example:
1.) I want to return the contents of the FIRST non-blank cell in the range (A2:F2) in cell I2.
2.) If I2 is not blank, then I want to return the column header (text) which corresponds to the resulting number content of cell I2.
3.) I want to return the contents of NEXT non-blank cell in A2:F2 in cell K2.
4.) If K2 is not blank, then return the column header (text) which corresponds to the resulting number of K2.
I will then repeat the 3rd & 4th scenarios in columns L thru S.
What I’m trying to do is place all non-blank data up in the first-foremost columns (H thru S) as I possibly can so I can use the data from these new columns (H thru S) as my merge fields in a Word document.
i just want to use vlookup and hlookup to give me the row and column headings for 30 to 40 sesor at a time.... but i keep getting #n/a whenever the functions meet a table of more than one column! (reduced workbook attached)
it should surely be simple to get this data - but i've struggled to no avail. I thought that having the four separate worksheets was the problem - but i haven't had any look even when i dump the data into a single worksheet!
i basically just want excel to return the cell reference of a sensor number which exists in a table. sometimes a sensor can appear more than once, but its not very common and i could happily work around that by doing the manual search (ctrl f, find all).
any advice would be very much appreciated, i'm struggling and the number of sensors i need to test will increase in the coming months.. please help!
should i even be using vlookup and hlookup? ive tried all the other excel functions, but they don't seem to be useful?
I have cells with blanks and cells with numbers ranging form 1 to 5. H5= blank, I5= blank, J5 = 3, K5= blank, L5= blank
I need a formula that would search H5-L5 and return just the 3.
I can't seem to get this If statement to return an empty cell It returns 0
HTML Code:Â
=IF(+B7+C7="","", +$C$3-B7+C7)
The formula will go in D7
If either B7 or C7 is empty, leave D7 empty
If either B7 or C7 has a value, add or subtract from $C$3
=LOOKUP(9.99999999999999E+307,Range)
tgdavis wrote:
> formula for the following return last entry in row to
> col. g:
>
> a b c d e
> f g
> 1 6/7/05 8/3/05 7/2/05
> 7/2/05
>
> 2 5/2/05
> 5/2/05
>
> 3 7/13/05 8/6/05.........................
is there anyway to have a vlookup formula display a blank cell instead of #N/A if the value it was looking for is not found. For example the first spreadsheet contains the persons name say Bob, the 2nd spreadsheet that the vlookup formula is searching does not contain the name Bob right now excel shows #N/A but what I want it to show is a blank cell. I've tried conditional formating to just white out the text if #N/A appears but can't seem to get that to work.
View 7 Replies View RelatedI have a column of imported data like this, with scattered blank cells:
Rd Frnt200634350464300399636350
I am doing a multiple regression where the above are independent variables. I usually have hundreds of variables in a column like this. Because each cell must have a value in it (the regression won't accept blanks), rather than manually fill the blank cells with a 0, I set up an adjacent column to convert the blanks to a 0 and regress off that column. But every formula I try still produces a blank in that adjacent column. I have tried things like: =IF(A1="",0,A1) but they do not work. I always get a blank in the adjacent column when the original cell is blank. Can't get a 0 in there.
I have a Vlookup, it returns a number, and when it doesn't find a match it returns N/A, and when it does return a match and the return value cell is blank, it returns 0. Is there any way I can have this so when it doesn't find a match, it returns a blank cell, and when it finds a match and there is no value in the return cell, it returns a blank cell as well, rather than 0?
View 6 Replies View RelatedHow do i get IFERROR to return blank? right now when I end the IFERROR with ,"" - I am getting 0.
View 1 Replies View RelatedI have the following formula:
=IF(ISBLANK(H16),"",IF(H16="Car","Ca",IF(H16="Boat","Bo")))
Where I would like it to return a Blank cell if H16 is blank. However it always puts False in the cell because there is a Vlookup that is hidden H16. Is there a way I can make it return as a blank cell instead of false.
i have IF sentence that returns either a number or a blank cell (tried using "") in a colum. This data is entered in a chart.
My problem is that that excel dont recognise the "" as a blank cell in my chart.
Is there a way to do this? i could maybe use VBA to make my own function that clear.contents if the cell value is smaler than say 1?
I want to find the cells 30 past the reference cell and the corresponding value:
i.e. =Sheet1!D312 to =Sheet1!D342 (=Sheet1!D(312+30))
or
=Sheet1!D312 to =Sheet1!E312
is there a way to automate this without having to manually edit each formula?
I have a formula that searches through a couple columns, and based on some criteria on those columns, it returns a value. The criteria looks at the dates in a given week, finds the earliest date, and then the largest value for all entries of the same date. So, I do not know what this vale is going to be in advance. In any case, Let's call this value1. This is all working fine!
Now, what I need to do is grab the value in an adjacent column to the left(same row) and add that to value1. Let's call this adjacent column value, value2. I was thinking that I could use the OFFSET function in this way, OFFSET(cell reference of value1, 0, -1) to return value2.
But this requires that I can get a cell reference for Value1. I cannot find out how to get a cell reference. I saw some VBA code to search and return cell references, but it assumed that you know what value you are looking for, and I do not know that in advance.
Want to look in one column and find the first non-blank numerical value, then have it return a value from another column.
Used to nest multiple IF functions together from different cells, but it seems overly complicated and time consuming. Sometimes I have over 30 cells to check.
For example, if Column A contains weekly sales data by week, entered weekly, and Column E has corresponding comparison data from the previous year. I want to enter a formula to check the first row that has sales data entered and have it match up the comparison value in the other column.
my question is how to return blank cell if i have no data inputted in left cell.. or if AH9 is blank or no data inputted AI10 will be blank using this formula.. =IF(AH9<75,"A",IF(AH9<82,"B",IF(AH9<87,"C",IF(AH9<92,"D","E"))))
View 2 Replies View RelatedI have a problem with finding the right function. My goal is to have the following function...
The cell D1 has the following function: [=IF(B1<=C1;"YES";"NO")] But I would like to have the cell D1 to be left blank, if the cell A1 is blank.
I have a normal VLOOKUP of this loookup range:
A 1
B 2
C 3
D 4
=VLOOKUP(T14,U6:V9,2,TRUE)
If the value in T14 is in the lookup range, I get the expected value returned. If the value exceeds the vlaues in the lookup range (e.g. I enter "E"), I get the last value in the range (4). How do I get it to return a blank cell if the entry in T14 is not found?
make an adjustment to my Formula so that if the Index match locates a cell that is blank it returns a blank cell rather than a 0. I know we need to add in =IF(iserror( but i am aving trouble..
View 5 Replies View RelatedI am trying to fix the below formula =IF(OR(ISERROR((F26-E26)/F26),((F26-E26)/F26)=1),"",(F26-E26)/F26). If I get an error from the formula I want it to return a blank cell. If I get 1 as the answer to the formula I'd like it to return a blank cell. This formula only works if the result is 1 but won't return a blank cell if the answer is an error.
View 2 Replies View Related