I have a Vlookup, it returns a number, and when it doesn't find a match it returns N/A, and when it does return a match and the return value cell is blank, it returns 0. Is there any way I can have this so when it doesn't find a match, it returns a blank cell, and when it finds a match and there is no value in the return cell, it returns a blank cell as well, rather than 0?
View 6 Repliesis there anyway to have a vlookup formula display a blank cell instead of #N/A if the value it was looking for is not found. For example the first spreadsheet contains the persons name say Bob, the 2nd spreadsheet that the vlookup formula is searching does not contain the name Bob right now excel shows #N/A but what I want it to show is a blank cell. I've tried conditional formating to just white out the text if #N/A appears but can't seem to get that to work.
View 7 Replies View RelatedI have a normal VLOOKUP of this loookup range:
A 1
B 2
C 3
D 4
=VLOOKUP(T14,U6:V9,2,TRUE)
If the value in T14 is in the lookup range, I get the expected value returned. If the value exceeds the vlaues in the lookup range (e.g. I enter "E"), I get the last value in the range (4). How do I get it to return a blank cell if the entry in T14 is not found?
I am creating a tracking spreadsheet where i can toggle between months (attached). It returns data properly when I select January or February from the yellow highlighted dropdown list. However, when i choose March, it returns 1/0/1900 because no data has been entered for March (table array) on the AAAG tab. How do I write the formula to return a blank cell on the summary sheet when no information has been entered into the table array yet?
View 2 Replies View RelatedI am using the formula : =VLOOKUP(G6,$R$8:$S$16,2) which is fine however i want it to return the value 0 if G6 is blank.
I have the following formula,
=IF(AH10="","",IF(VLOOKUP(AH10,Sheet3!C:D,2,FALSE)="","",VLOOKUP(AH10,Sheet3!C:D,2,FALSE)))
that I would like to return a blank cell not N/A if the value that is in "AH10" is not found.
I'm using this formula (thanks to dafan & HalfAce [url]
=IF(VLOOKUP($A177,$A$736:$C$787,3,FALSE)=0,"",VLOOKUP($A177,$A$736:$I$787,3,FALSE))
to return the value located in the 3rd column of the range when the value in the 1st column of the range matches the data in A177.
However, there isn't a match for the data in A178 in the range, so the formula returns "#N/A". I would like the cell containing the formula to remain blank in those instances.
Where in this function would I put " " to return a blank field if false is returned?
=IF(D18>=1,(VLOOKUP(C18,C7:E13,2,FALSE))-(VLOOKUP(C18,C7:E13,3,FALSE))+(VLOOKUP(C18,C7:E13,3,FALSE))*D18)
in one column of my spreadsheet and it is returning the correct concatenation for the appropriate lines. However, I wish to have the column's cells return an answer of blank (" ") if B15, B16... etc is blank. In other words, at the moment, a correct answer would read something like '1810sd0000' C10 and B15 used, while an incorrect answer would still display '1810', but I want it to be a blank cell.
View 8 Replies View RelatedI am using Excel 2000
I am using the "IF" formula to pull in data into a forms section. I then save the forms section as a CSV file.
When the IF statement returns the "false" value, it is looking to pull over a "blank" cell. When that happems, a "0" pulls over. I tried to put a "" in the blank cell, but while the output of the formulaa looks "Blank" when I convert the tab to CSV, the output is a quote mark ".
I need the formula to display a real BLANK cell or something that acts like a blank cell
I'm trying to do several things. I have 6 columns (A:F) with column headers and 12 rows of data and not every cell has a number as its content. Some cells are blank. I have attached my file.
Using Row 2 as my example:
1.) I want to return the contents of the FIRST non-blank cell in the range (A2:F2) in cell I2.
2.) If I2 is not blank, then I want to return the column header (text) which corresponds to the resulting number content of cell I2.
3.) I want to return the contents of NEXT non-blank cell in A2:F2 in cell K2.
4.) If K2 is not blank, then return the column header (text) which corresponds to the resulting number of K2.
I will then repeat the 3rd & 4th scenarios in columns L thru S.
What I’m trying to do is place all non-blank data up in the first-foremost columns (H thru S) as I possibly can so I can use the data from these new columns (H thru S) as my merge fields in a Word document.
The following formula: =IF(ISNA(VLOOKUP(C11,$D$139:$E$149,2,FALSE)),"",VLOOKUP(C11,$D$139:$E$149,2,FALSE)) (located in cell D11) looks in cell C11 Baseball Players Shirt Numbers then looks in the range $D$139:$E$149 to find the Players Name and place the Players Name in cell D11, but in this case cell D11 is blank. The table ($D$139:$E$149) is laid-out as follows; no headers, Players Names are in column 1 (Column D) and Baseball Players Shirt Numbers are in column 2 (Column E). The Baseball Players Shirt Numbers are formatted General in both the table and in cell C11. I can't figure out why cell D11 returns a blsnk answer?
View 9 Replies View RelatedI have cells with blanks and cells with numbers ranging form 1 to 5. H5= blank, I5= blank, J5 = 3, K5= blank, L5= blank
I need a formula that would search H5-L5 and return just the 3.
In sheet2 I've many numeric value.
In sheet1, A1: =Sheet2!B12 which returns 0 (zero) though B12 of sheet2 is the result of =sum(B1:B11) i.e 660. But if in sheet1 A1=Sheet2!D12 or any other cell in sheet2 instead of B12, A1 gives correct result. That means cell A1 itself is not a problem. I checked format of B12 which is number format.
I can't seem to get this If statement to return an empty cell It returns 0
HTML Code:Â
=IF(+B7+C7="","", +$C$3-B7+C7)
The formula will go in D7
If either B7 or C7 is empty, leave D7 empty
If either B7 or C7 has a value, add or subtract from $C$3
=LOOKUP(9.99999999999999E+307,Range)
tgdavis wrote:
> formula for the following return last entry in row to
> col. g:
>
> a b c d e
> f g
> 1 6/7/05 8/3/05 7/2/05
> 7/2/05
>
> 2 5/2/05
> 5/2/05
>
> 3 7/13/05 8/6/05.........................
I have a column of imported data like this, with scattered blank cells:
Rd Frnt200634350464300399636350
I am doing a multiple regression where the above are independent variables. I usually have hundreds of variables in a column like this. Because each cell must have a value in it (the regression won't accept blanks), rather than manually fill the blank cells with a 0, I set up an adjacent column to convert the blanks to a 0 and regress off that column. But every formula I try still produces a blank in that adjacent column. I have tried things like: =IF(A1="",0,A1) but they do not work. I always get a blank in the adjacent column when the original cell is blank. Can't get a 0 in there.
How do i get IFERROR to return blank? right now when I end the IFERROR with ,"" - I am getting 0.
View 1 Replies View RelatedI have the following formula:
=IF(ISBLANK(H16),"",IF(H16="Car","Ca",IF(H16="Boat","Bo")))
Where I would like it to return a Blank cell if H16 is blank. However it always puts False in the cell because there is a Vlookup that is hidden H16. Is there a way I can make it return as a blank cell instead of false.
i have IF sentence that returns either a number or a blank cell (tried using "") in a colum. This data is entered in a chart.
My problem is that that excel dont recognise the "" as a blank cell in my chart.
Is there a way to do this? i could maybe use VBA to make my own function that clear.contents if the cell value is smaler than say 1?
I am trying to use vlookup to locate a cell in another work book. The identifier is in the same workbook as the vlookup formula however the table and column to look within is in another. The identifier will also show up in the other work book where the table resides.
View 4 Replies View RelatedIf it can not locate the correct responce I want it the formula cell to be blank. How do I adjust my formula to do this?
This is the forumal I am currently using
=VLOOKUP(A26,Subs!A:F,5,0)
I have also tried this one as well
=IF(ISNA(VLOOKUP(A6,Subs!A:E,5,0))+(VLOOKUP(A6,Subs!A:E,5,0)=""),"",VLOOKUP(A6,Subs!A:E,5,0))
I am trying to use vlookup so that when each site name is selected the relevant comments for that site are displayed.
I have a formula that is working, but it displays "0" if there is nothing in the cell. How do i get it to display a blank cell if thre is nothing in the reference cell.
this is the formula that i am using:
=IF($C$4="", "", IF($C$4="No Match", "", (VLOOKUP($C$4,Comments!$A$2:$U$295, 5,0))))
The site name appears in C4, and is selected from another sheet in the workbook.
I have a table in columns A-D. I am trying to perform a vlookup to return the first non-blank in columns B-D based on the lookup value in column A. Columns F-I are what I am looking for the formula to do. I think I am close with the following array formula but not quite there.
Excel 2010LMN12#N/A3Sheet1Array FormulasCellFormulaM2{=INDEX($B$2:$D$9,MATCH($F$2,$A$2:$A$9,FALSE),
MATCH(TRUE,INDEX(INDEX($B$2:$D$9,MATCH($F$2,$A$2:$A$9,FALSE),0)<>"",),FALSE))}Entered with Ctrl+Shift+Enter.
If entered correctly, Excel will surround with curly braces {}.
Note: Do not try and enter the {} manually yourself
Excel 2010ABCDEFGHIJKL1PFQPFQ212341234CRWEWS312343456
WETXDR41234CR5123461234WE712348123491234WS1034562)
What I want it to return, vlookup of first non-blank
113456WE123456DR133456143456TX153456163456173456183456191) Â
What table looks like20Sheet1
Possible to have two spreadsheets and then perform the following tasks
1. Check If the cell in column I from cell I4 and the spreadsheet varies in length is blank and if it is - see item 2
2. The data equals certain values i.e. CDE or CDE - QUO or CDE - PRO - see item 3
3. Perfom a VLOOKUP to another spreadsheet
If the routine stops at any of the items then move to the next cell
Data is on spreadsheet - Allocations.xls
Vlookup is performed on this spreadsheet - 001 - Allocations - Blocks
The Vlookup for example is: =VLOOKUP(A5,'[001 - Allocations - Blocks.xls]CurrentDayAll'!$1:$65536.9,FALSE)
Want to look in one column and find the first non-blank numerical value, then have it return a value from another column.
Used to nest multiple IF functions together from different cells, but it seems overly complicated and time consuming. Sometimes I have over 30 cells to check.
For example, if Column A contains weekly sales data by week, entered weekly, and Column E has corresponding comparison data from the previous year. I want to enter a formula to check the first row that has sales data entered and have it match up the comparison value in the other column.
my question is how to return blank cell if i have no data inputted in left cell.. or if AH9 is blank or no data inputted AI10 will be blank using this formula.. =IF(AH9<75,"A",IF(AH9<82,"B",IF(AH9<87,"C",IF(AH9<92,"D","E"))))
View 2 Replies View RelatedI have a problem with finding the right function. My goal is to have the following function...
The cell D1 has the following function: [=IF(B1<=C1;"YES";"NO")] But I would like to have the cell D1 to be left blank, if the cell A1 is blank.
make an adjustment to my Formula so that if the Index match locates a cell that is blank it returns a blank cell rather than a 0. I know we need to add in =IF(iserror( but i am aving trouble..
View 5 Replies View RelatedI am trying to fix the below formula =IF(OR(ISERROR((F26-E26)/F26),((F26-E26)/F26)=1),"",(F26-E26)/F26). If I get an error from the formula I want it to return a blank cell. If I get 1 as the answer to the formula I'd like it to return a blank cell. This formula only works if the result is 1 but won't return a blank cell if the answer is an error.
View 2 Replies View Related