Cell References In Copied Sheets
Apr 25, 2006
I have created some code that copies a master workbook into a new workbook that then creates new tabs for the sheets relevant to week numbers. In the master workbook there are 8 sheets, most of which reference each other in their formulas at some point. The problem arises in the newly created workbook as the sheettab names are renamed e.g "manager" in the master will become "manager wk1", "manager wk2" and so on. All the sheets are copying over great but they the lose their references to each of the sheets within their week groups because the formulas do not change to the correct week references. I am trying to solve the problem by using the Indirect funtion to change the formulas in the master to reference the correct week number, but i feel this is not the best way?
View 2 Replies
ADVERTISEMENT
Feb 28, 2014
I have copied a data to another sheet. but when i change the data, the copied cell does not change...
View 5 Replies
View Related
Mar 18, 2014
As you would normally use indirect formulas so the cell references don't change. Which that is what I want in the end, but I need to copy them to an indefinite number of cells first and would like to not do it by hand. I have found some solutions to similar questions/problems but cannot figure out how to make them work for me. So, what I am looking to do is this... (I have also attached the spreadsheet for reference)
I have gotten the information in columns A through F on the first sheet to update as rows are added, moved, deleted on the second sheet using Indirect range. Also, I could do this for Column I (Copmleted Proj. Avg. Terminations) but I would have to do it manually (as I began doing in I3, I4 & I5) but that would be time consuming. So I am hoping there is a way I can copy the formula down the cells are updated for the initial copy but then don't update if the referenced cells are moved or deleted.
View 1 Replies
View Related
Oct 25, 2007
I have a workbook within which i have a worksheet that contains a lots of macro code (coded by me). As the workbook gets used by various people, i need to copy the worksheet and the macros across to the updated workbook, which doesnt contain the macro worksheet at all.
I have tried to copy it across by clicking on its tab and using the move or copy facility. This copies the sheet across as required. But for some reason, the macros all reference the old workbook. A small bit here for example for some reason opens up the old workbook and then performs the code in the old worksheet:
Sub SelectAll()
For i = 12 To 20
Set curcell = Worksheets("Form Generator").Cells(i, 3)
If curcell = False Then
Cells(i, 3).Value = True
End If
Next i
End Sub
As curcell is equal to worksheets...() i would have expected it to use the local worksheet, ie the one that the macro is attached to. So why is excel proactively hunting out the old workbook and sheet? is the method i used to copy across the sheet with the macros incorrect? If so, how should i go about it?
View 3 Replies
View Related
Oct 22, 2008
I've inherited a workbook with 100 or so tabs. There are absolute references to cells on the summary page scattered about all over the place. Hundreds of them, all over everywhere, with no easy way to find them.
Now they want to be able to add/delete rows on the summary page and sort.
I want to replace their absolutes with named ranges. Is there an easy way to find every cell that references the summary sheet?
I have not used Excel since the 80's (when I knew everything about it), but obviously that was many versions back... I jumped into using VBA, and that's starting to make sense, but I'm still missing some of basics.
Using Excel 2003.
View 9 Replies
View Related
Mar 7, 2009
I am writing a VBA macro in excel. I have several sheets in this one workbook........one sheet for each day in a given month. Sheets for each day are labled as 3_1, 3_2 for march 1st and march 2nd respectively. I also have 4 sheets for the 4 weeks in a given month. The weekly sheets are labeled week1, week2 etc....
What i am trying to do is this:
In the week1 sheet i am trying to "put" a formula in say cell 9,12 which sums up the same cell in the first 7 days of the month. But i am having issues. Does anyone have a good way to do this via VBA?
David
View 9 Replies
View Related
Jan 25, 2014
[URL] ....
I want to sort the Inventory Checklist sheet based on Column D but it gives me nothing but references errors.
View 1 Replies
View Related
Mar 26, 2007
When copying sheets within a spreadsheet I receive numerous examples of the attached error message: when I search for the named range referred to in the source sheet it doesn't exist - I can only assume that it is a variable name that has been assigned somehow - but as far as I can tell, there aren't any macros associated with the spreadsheets in question that are generating the names that are displayed .. so unsure how the names are appearing. how to remove these phantom names so the prompt stops appearing?
NB: If I answer "No" to the prompt I must enter a different name - and if I do that, the system creates the new name in the copied sheet so if I then copy the copy on to another sheet the number of "named" ranges includes both the original "phantom names" AND the additional "phantom names" I've created as part of this process.
View 5 Replies
View Related
Apr 19, 2008
One of the sheets in my workbook has 5 rows (Rows 1 - 5) that I need to copy and insert at the top of all but 3 of the other worksheets. I can specify the names of the 3 worksheets that I want to avoid changing. The other worksheets will be named differently each time I use the macro.
View 2 Replies
View Related
Nov 25, 2007
It is suppose to be that if the employee is "FT" and has worked >=4 years the return is 15. But if the employee is FT and has worked 2 years but less than 4 years then it is suppose to return 10 (these are days off) Or if the employee is FT and has worked 1 year, but less than 2 then it should return 5 days off. And all the others in the column get no days off.
I have tried to do it with structured references and with cell references I get a column of zeros!
View 9 Replies
View Related
Jun 17, 2014
I have a spread sheet with tabs that are for each week of the year. Each tab shows the date on top and times (broken into 30 minute intervals) on the side; the inside has information like an event on the inside.
My goal is to keep that information there and to have a "master sheet" that holds all this information in a list format so I can filter out some information.
View 1 Replies
View Related
Oct 20, 2013
with a macro. I am looking to copy row 2 to the last row and past the copied rows directly below the copied contents.
View 9 Replies
View Related
Feb 1, 2013
I have 4 sheets name A, B, C and D.
The D worksheet is a summary sheet that pulls in data from A, B and C.
e.g.
=A!A4
=A!C4
There are approx 50 of these references to Cell A. Is there an easy way to copy the same formulas but reference Sheet B and C without having to retype them all?
View 1 Replies
View Related
Jun 21, 2013
I am trying to make a formula use an IF statement to identify different cells on a different sheet to pull raw data from.
However I've never tried formulas involving multiple sheets before.
This is the formula i get a circular reference for =IF('Store Input'!I6:J6=Lewis,(('Store Input'!C6:D6/1.2)/100*0.75))
I am not entirely sure what im doing thats causing confusion but ill explain the desired effect.
If a Cell has a value of "Name" then take data from cell "X" and do calculation /1.2 /100 *0.75 on a separate sheet.
Further more i want it to apply to multiple cell possibilities. so like the one above except repeated on different cells.
So as well as the above, i want it to perform the same operation for a set of cells further to its right and so and so forth.
View 1 Replies
View Related
Sep 14, 2007
I would like to know whether its possible to fix a sheet to always be the second sheet in a work book no matter how many other sheets are added. Currently I have set up macros to add subsequent sheets before the last sheet, so that Sheets("Number 2") remain sheets(2). Is there some way I can lock the first two sheets so that when I reference them in my code as sheets(1) and sheets(2) it will reference the right sheets. Right now I have it set up so that Sheets("Number 2") can be renamed by the user, and data inputted on this sheet, but I require that the user not be able to move this sheet and the sheet preceding it.
View 5 Replies
View Related
May 30, 2014
Would be a massive time saver but can't find anything here or on Google on how to do this.
View 1 Replies
View Related
Jun 30, 2014
Is it possible to loop through a list of sheets and execute some calculations that have sheet references from a different list of worksheets? For example, you have a list (list 1) of your worksheets, which will be the destinations of the calculations, and you have a second list (list 2) of worksheets that the calculations are based on. So, lets say there are sheet1 and sheet2 in list 1, and sheetA and sheetB in list 2. The calculations based on sheetA would appear in sheet1, and calculations based on sheetB would appear in sheet2. I thought the code would look something like this:
Code:
Sub LoopthroughWorksheets()
Dim sheet_name As Range
Dim sheet_name2 As Range
Set sheet_name2 = Sheets("WS").Range("F:F")
[Code] ......
I'm getting a "Run-time error '1004: Application-defined or object defined error" at this line:
Code:
.Range("K1") = .Range("sheet_name2.Value!A14").Value
View 2 Replies
View Related
Oct 22, 2009
I have a number of statements within the Sheet Event Code (Excel 2007). Three times lately I have added a column and had to go back into the code and find all of the references that needed changing to reflect the new column.
I have been working on this for a couple of days and even tried EE, but to no success.
I have read that Defined Names / Constants should be used as often as possible, but even trying that, the VBA code errors out or "hangs up". Even within Bill Jalen's book (VBA and Macros 2007), there is nothing that addresses this, especially using Intersect.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rng As Range
On Error GoTo mEnd
Set rng = Sheets("Log").[F14:F10000]
If Not Intersect(rng, Target) Is Nothing Then
If Target = "" Then
With Sheets("Log")
View 9 Replies
View Related
Jan 3, 2014
After using a vlookup formula, and a if then statment I found out that there are duplicates on my other sheets. I want to use a Macro to use the duplicate value in search and find to locate the item and highlight it on my other sheet. I have searched the web but can't find anything on this.
I can't seem to paste my coppied cell into the what in the find.
Sub Macro15()
'
' Macro15 Macro
'
'
Selection.Copy
[Code]....
View 2 Replies
View Related
Nov 7, 2006
original thread 2. Originally Posted by Dave Hawley
Private Sub Worksheet_Change(ByVal Target As Range)
Dim wSheet As Worksheet, wSheet2 As Worksheet
Dim strNum As String, strNum2 As String
If Target(1, 1).Address = "$J$5" Then
If Target = vbNullString Then Exit Sub
If IsNumeric(Target) Then
strNum = Target + 1
strNum2 = Target
On Error Resume Next
Set wSheet = Worksheets(strNum)
Set wSheet2 = Worksheets(strNum2)
On Error Goto 0
If Not wSheet Is Nothing Then
Application.EnableEvents = False
Application.Undo......................
What I would like to do is after the new sheet is created it would make cell j5 on the newly created sheet the same name as the sheet itself. I've tried to do that but the above code tries to activate. Is there a way to have the above code only work on the very first sheet and for the cell naming code to work on only the created sheets
View 2 Replies
View Related
Feb 10, 2014
I set up formulas to count text characters in a range of cells. I'm tracking attendance and payments for a small yoga studio.
All I need to do is count "Y"s for prepaid attendance and "DI"s for drop-ins. I have the formulas working but they are absolute so inserting a row will break my sheet.
=COUNTIF(E14:Z14,"*Y*")
=COUNTIF(E11:Z11,"*DI*")
View 1 Replies
View Related
Sep 7, 2012
I am working on a database and trying to remove duplicates. When there are duplicates, I want to take the contents of one cell and copy them as a comment on the cell above (or below).
I tried to work on a small macro to do so, but the contents of the cell cannot be copied (it comes out as a blank).
The long way is to 'double click' in the cell, Ctrl+A, cut, click the cell above, Ctrl+F2, paste. This way is very long as I have thousands of duplicates.
View 4 Replies
View Related
Dec 15, 2008
I've found a few macros that will automate changing cell references from absolute to relative and they work great. However, when I run the macros on formulas that have references to another worksheet or workbook, the macro will not work correctly.
View 9 Replies
View Related
May 5, 2014
I'm trying to copy the a name from cell X2...JohnDoe and rename the current sheet with the contents of X2. I'm using the following code and getting my sheet named as "True"
Sub SheetName()
'
' SheetName Macro
'
Dim ShName As String
ShName = Range("X2").Select
Selection.Copy
Sheets.Add.Name = ShName
End Sub
View 4 Replies
View Related
Jun 11, 2007
When i push a button how could i get the buttons text copied to cell? For Example:
If i have button and it's text is TestButton. I push the button and the text TestButton is copied to cell(1,1). How can i do this?
View 2 Replies
View Related
Mar 2, 2009
I am using the dsum formula to sum some values...the formula in B2 is:
=DSUM(BaseSistemasFebrero,"vlfinf",OFFSET('Planes Entidades'!B$1,0,0,COUNTA('Planes Entidades'!B$1:B$49),1))
The Planes Entidades sheet the data is layed out like this: ....
View 9 Replies
View Related
Oct 6, 2008
I have a large macro where it looks into 50 documents and pulls out a value from a specific cell.
I dont have any problem with the coding for this but was wondering if it is possible to add another line of coding so that once it has copied the cell value the documents then close.
Currently when I run the macro, it leaves all 50 documents open once it has taken all the cell values and pasted them into my "Master Document".
View 3 Replies
View Related
Nov 15, 2012
I am trying to pull 4 cells (Q3:T3) from multiple workbooks into a master workbook. When I run the below macro, I only have the first column of the copied data returned, and can't figure out how to have it paste all four cells.
Sub ExtractData()
Dim wb As Workbook
Dim TheFile As String
Dim MyPath As String
Static CopyCell
[Code] ....
View 3 Replies
View Related
Dec 15, 2006
I copied some data off the web and there are a ton of cells with Currencies that I would like to take out the spaces infront of the numbers. Because without doing so, I am unable to use them in formulas.
so I would like to convert this ' $52,000' to '$52,000'
I tried the Trim(Cell) but that doesn't seem to work, this data does not appear to be text. I can't even change the format on it, doesn't make a difference.
View 9 Replies
View Related
Oct 24, 2006
I have copy 65'000 formula text cells from a software and paste it to excel. But, the formula in cell is not activated. In order to activate the cell formula, I have to click on each individu cell and press enter to active it. But i got
65'000 rows of the similar cells. So, what is the quick way to all the text formula at the same time.
View 2 Replies
View Related
