How can i put values from cell D2:D1000 in variable like:
Startdate = "D2:D1000"
and
EndDate= "E2:E1000"
And then I need to check if date written into inputbox is between startdate and end date And it should consider startdate and end date like this in D2= first start date and in E2 = first end date and in D3 = second start date and in E3 = second end date
In my financial modelling I often have a calculated number of months of inventory. This number varies. I need to use this number to calculate the actual inventory value. For eg. it may be 3.2 months of inventory; in this case I need to sum 3 cells (current month, current month -1, current month -2) plus 0.2 of the fourth cell (current month -3)
But I may need to change the number of months of inventory to, for example, 4.2. In this case I would need the sum of four cells plus 0.2 of the fifth cell etc etc.
I am new to Excel macros and programming, and am running into a problem that I can't figure out how to solve. I have read through the forum and tried various examples, but I am still not getting the result I am looking for.
I have a spreadsheet that has a variable number of cells in-between blank rows (the data can be 1 to 6 rows). I need to sum up the rows of two columns and see if they equal 0 or if there is a difference. If there is a difference, I want to make the cell red. The exact problem I am having is I can't make it check the # of rows and run the formula based on that number of rows. I am attaching an example of my raw data followed by an example of what I am looking for as the end result.
The variable, rowNumber, specifies the row to be selected. How would I modify this code to only select the 1st 8 cells in a row instead of the whole row?
Rows(rowNumber).Select
I would then like to cut the selection and paste it into row 1:
Selection.Cut
Range("A1:H1").Select
Selection.Insert Shift:=xlDown
Do I have to select this range before inserting the selection?
I would like to have a cell in A2 sum up the values in cells A1, B1, C1 where the number of cells it sums is a variable in another cell that may change. I would like the same to apply to cell B2, C2, D2, etc.
This may make more sense if you look at the attachment.
ActiveCell = "=(SUM(R3C5:R[0]C[-3]))"
In a macro I use that formula to add the cells of column E (or 5) from Row 3 down to the row of the active cell which is in column H (or 8), (the active cell would be H9 in this instance); and the result goes to the active cell as the formula =SUM ($E$3:E9).
But I want the result to go directly to a numeric variable, not to a cell. Something equivalent to this:
a=(SUM(R3C5:R[0]C[-3])), which is not correct.
What would the correct syntax be?
Merging cells where the row is a variable. The code has two loops that consolidate date from two other sheets, it works fine but as you can see it puts the data into columns A,B and C,D respectively. My goal is to combine both into the A,B columns, which I can do very easily. My problem is that between the loops, marked by "HERE" i want to skip a line, merge cells A and B on whatever row that maybe and set an header.
Code:
Workbooks("Discovery Errors.xls").Sheets("Totals").Range("A3:U60000").EntireRow.Delete
Workbooks("Discovery Errors.xls").Sheets("Totals").Range("A3:U60000").EntireRow.Font.Bold = False
ActiveWorkbook.Sheets("Disc_Nodes").Activate
ActiveWorkbook.Sheets("Disc_Nodes").Range("A1:U60000").Sort Key1:=Range("J1"), Order1:=xlAscending, Header:= _
xlYes, OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortTextAsNumbers
LastRow = Cells(Rows.Count, 1).End(xlUp).Row
[Code] ........
Is it possible to have a cell populated by the value of a Variables obtained (or defined) using VBA? A message box confirms that the variable is indeed defined as desired but I would like its value used in a spreadsheet cell.
View 9 Replies View RelatedExcel VBA. I have a problem which is frustrating me almost beyond measure, but I am convinced that the answer is a simple one.
sub a() copies the values of 3 non-contiguous cells and pastes them as contiguous cells. This is simple as the cell addresses to be copied are absolute.
VB:
Sub a()
Dim x As Integer
x = 6
Range("A1,C1,E1").Copy
Cells(x, "H").PasteSpecial Paste:=xlPasteValues
End Sub
Sub b() copies a range of contiguous cells, including empty cells, and pastes them as contiguous cells, including empty cells. This is simple because I have specified a "range" of cells with variable addresses.
VB:
Sub b()
Dim x As Integer
Dim y As Long
x = 6
y = 1
Range("A" & y & ":E" & y).Copy
Cells(x, "H").PasteSpecial Paste:=xlPasteValues
End Sub
However, what I really want to do is copy 3 non-contiguous cells with variable addresses similar to sub b (ie. 'A' & y, 'C' & y, 'E' & y) and paste them as contiguous cells (without empty cells) as in sub a ().
What is the correct way to specify the cells to be copied?
I have two columns - A and B. In column A there are blank cells and filled cells. There is a blank cell and after it - a variable number of filled cells, then a blank cell again and a variable number of filled cells. I am trying to concatenate the filled cells from column A into a single cell in column B, which is corresponding to the blank cell in column A. Values should be comma delimited.
For example: A2-blank; A3-27; A4-63; A5-blank; A6-31; A7-blank .. and in column B should be B2-27,63; B3-blank;B4-blank; B5-31,B6-blanc and etc.
I have several words in sheet2.one word per line. every line in sheet1 should be checked and deleted if the line (colum 3 and 4) contains any of the words in sheet2. i decided to go with two for-loops, my Problem is a error in line 7 and 9 (indicated by arrows). it seems to me that ...Cells(...).Value is not allowed for strings. i already tried .Text, checked several VBA Forums but could not find a solution.
View 13 Replies View RelatedI'm once again here asking for a smart trick to do a difficult (for me) thing. I need to write a formula capable of averaging the n cells on its left. The problem is that the number of cells to be averaged is a variable contained in anothe cell therefore the exact number is not known (a priori) and changes at every sheet refresh.
View 3 Replies View RelatedI have a question about making a variable selection.
In cell X25 is written "B9" and in cell Y25 is written "M39".
Now i want to make a selection by a macro from cell B9 to cell M39.
I'm trying to make a macro'd button that when clicked will select the cells A1:A?? where ?? is equal to the value in cell B1
B1 is a variable number that changes to be the proper amount of rows that I require selected.
It's always A1 down to A9 minimum and A1 down to A400 max.
Once selected I need the macro to copy the selected cells to the clipboard for another application to be able to paste that info.
So far I've been able to get the copy command to work and the range command to work but can't seem to figure out how to put the variable number from B1 into the range command.
I am trying to get the following equation to search for cells that contains the term 3R. The issue is I have several different 3R formations as follows and want it to count all of them.
3R
3R FIB
3R S Nasty
3R S Nasty FIB
This is what I am currently using but I want it to be more detailed. Where my search is for everything on 1st down with 10 yards to go in a 3R formation.
=SUMPRODUCT(--(C2:C350=1),--ISNUMBER(MATCH(Criteria,{10},0)),--(H2:H350="3R"))
23
20
1
10
-19
R
Run
PISTOL HVY
3R
[Code] .......
how to sum 3 cells when 2 out of 3 cells match.
Here is the data.
Cells A1:A10 = Florida
Cells A11:A20 = Florida State
Cells A21:A30 = ~Florida
Cells b1:b5 = W
Cells b6:b25 = L
Cells b26:b30 = W
Sum all cells that have "Florida", "~Florida" and "W" in common.
I am creating a macro needed for many worksheets. I am trying to paste a range that will be different within each worksheet. I started the macro off by locating the correct cell to start the copy from. I want to copy 11 columns across and 32 rows down from the cell I selected.
View 7 Replies View RelatedI'm trying to write some code to select cells in a number of columns on a variable row. I have the following code to define the rownumbers for Cash and Pal:
Columns("G:G").Select
Selection.Find(What:="Total Cash", After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
[Code]....
Then I can use the following code to select a cell in a single column:
Range("P" & Cash & ":P" & Pal).Select
but I need to select cells in columns P, R, T, V, X, etc.....
If I was doing this for a fixed rownumber I would use:
Range("P22:P23,R22:R23,T22:T23,V22:V23,X22:X23").Select
but because my rownumber is variable I tried to use:
Range("P" & Cash & ":P" & Pal, "R" & Cash & ":R" & Pal, "T" & Cash & ":T" & Pal, "V" & Cash & ":V" & Pal, "X" & Cash & ":X" & Pal).Select
but this doesn't work giving the Compile error: Wrong number of arguments or invalid property assignments
I have 1 column with a varying amount of rows (around 2000+ rows) with data that is about 10 chars long. Since I cannot print it all on a few pages, I would like a way to re-orgnize the data into cells so I can print on as few pages as possible such that the qty of columns isn't wide then an 8.5 x 11 page.
One idea is the following.
Here's what i have.
Col1
1
2
3
4
5
6
7
8
9
10
...
Here's what i want.
Col1 Col2 Col3 Col4 Col5 Col6 Col7 ...
1 2 3 4 5 6 7
8 9 10 ...
I'm trying to create a sum that gives the output with the currency format but also change column D from from D2 to the Total the currency format. (it changes based on how many customers). Here is the code
Code:
Windows("Test1.xls").Activate
Dim rng As Range
Set rng = Sheets("Sheet1").Range("D65536").End(xlUp).Offset(1, 0)
Range("D" & lastrow + 4).Select
lastrow = Cells(Rows.Count, 1).End(xlUp).Row
Cells(lastrow + 1, 4).Formula = "=sum(D2:D" & lastrow & ")"
rng.Select ("D" & lastrow)
Selection.NumberFormat = "$#,##0.00"
I know it has to do with the rng.select statement but I'm just not sure how to make it work for all of Column D from D2 to the Total/Sum.
I want to do a concatenate for multiple fields, but want the user to specify which cells should be concatenated by entering this in a few fields. What does this formula (or VBA) look like?
Let's assume there is the possibility to concatenate a maximum of 4 cells. Call the 3 cells that will be concatenated cell1, cell2, cell3 and cell4.
On the first sheet of the workbook the user enters the following:
cell1 = Sheet2!A4
cell2 = Sheet2!B4
cell3 = Sheet2!C4
cell4 = Sheet2!D4
Here are some cells and their values:
Sheet2!A4 = Hel
Sheet2!B4 = lo
Sheet2!C4 = World
Sheet2!D4 =
Upon enterring the information after the = sign for the cell1, cell2 and cell3, the formula for the concatenate becomes: =CONCATENATE(Sheet2!A4, Sheet2!B4,Sheet2!C4 ).
The result of the formula is: HelloWorld
If I now change the values of cell1, cell2, cell3, and cell4 the following should happen:
cell1 = Sheet2!B4
cell2 = Sheet2!C4
cell3 =
cell4 =
The formula for the concatenate becomes: =CONCATENATE(Sheet2!B4, Sheet2!C4).
The result of the formula is: loWorld
The spreadsheet I've been working on is functionally working how I would like, but I am looking to improve it cosmetically. I have a range of cells in which I input scores. Those scores are averaged in blocks of the value of cell B1. I would like to fill the cells yellow if they are a multiple of the value of B1.
View 2 Replies View RelatedI'm trying to place the value of "X" in multiple cells based on a cell variable (i). For example, if (i) is evaluates to 35, the following code ...
View 8 Replies View RelatedI'm trying to make a spreadsheet more secure to prevent unintentional changes.
What i'm looking to do is to lock all cells so no changescan be made unless the user clicks column A.
Column A should remain unlocked and when the user clicks it i would like the entire row unlocked for editing (but only after column A is clicked)
I will run a macro to lock the entire sheet again once the sheet closes.
I need to tweaking some code. I currently have the following
View 2 Replies View RelatedIm trying to make a formula that lets you type in your current level, and then calculates how much XP you have remaning untill you reach the max level.
The way the forumla would need to work would be something like this:
(E10) Enter Current Level:
(F10) 37 (which is my current level)
F11 - would then add cells from C37 to C70 (calculating the total amount of XP required) and then display in (F11)
Being able to say if, then is far to cpmplicated for me in excel. I'm just trying to make this for a bit of fun and am sure one of you talented people can easily do this.
I am trying out VBA to write a macro in order to average every 25 cells in a column. My attempt so far is
Dim myrow1 As Integer
Dim myrow2 As Integer
myrow1 = 2
myrow2 = 25
Range("G2").Select
ActiveCell.FormulaR1C1 = "=AVERAGE(R " & myrow1 & " C3:R " & myrow2 & " C3)"
myrow1 = myrow1 + 24
myrow2 = myrow2 + 24
So I am hoping the first ActiveCell.FormulaR1C1 gets read as =Average(C2:C25)
However I just get Run-time error '1004' Method 'FormulaR1C1' of object 'Range' failed.
I would like to copy a cell in v2 to from v3 to end of column v where there are values in column u.
View 4 Replies View RelatedI have the following code (just pasting the relevant section) which crashes when it reaches the highlighted line of code. and a dialog box pops up with the text: "Object variable or With block variable not set"
Sub test()
Dim StartRng As Range
Dim Buffer As Range
Set StartRng = WorkSheets("Sheet1"),Cells(1,1)
StartRng.Activate
ActiveCell. CurrentRegion.Select
Buffer = rngStart.CurrentRegion.Copy
' I also tried the following line of code but that didn't work either
'Set Buffer = rngStart.CurrentRegion.Copy
..
...
End Sub
In the attached file, I have two columns (A and B) and the column A will vary within the range from A4:A104 and column B will vary according to A. Nevertheless column A has #N/A error which is mandatory for chart. So I am looking for a macro to do the following:
Start with cell B4 and go until value exsists for "B" (let me say for eg. B40) and select the range A4:B40 and ask the user to give name for the export file export only that selection as a tab delimited txt file.
http://www.cpearson.com/excel/imptext.htm
I looked in to the above article. But i have trouble in selecting dynamic range and to avoid #N/A error in the range.
