Variable = A Sum- Formula To Add The Cells
Mar 31, 2007
ActiveCell = "=(SUM(R3C5:R[0]C[-3]))"
In a macro I use that formula to add the cells of column E (or 5) from Row 3 down to the row of the active cell which is in column H (or 8), (the active cell would be H9 in this instance); and the result goes to the active cell as the formula =SUM ($E$3:E9).
But I want the result to go directly to a numeric variable, not to a cell. Something equivalent to this:
a=(SUM(R3C5:R[0]C[-3])), which is not correct.
What would the correct syntax be?
View 14 Replies
ADVERTISEMENT
May 6, 2009
I am new to Excel macros and programming, and am running into a problem that I can't figure out how to solve. I have read through the forum and tried various examples, but I am still not getting the result I am looking for.
I have a spreadsheet that has a variable number of cells in-between blank rows (the data can be 1 to 6 rows). I need to sum up the rows of two columns and see if they equal 0 or if there is a difference. If there is a difference, I want to make the cell red. The exact problem I am having is I can't make it check the # of rows and run the formula based on that number of rows. I am attaching an example of my raw data followed by an example of what I am looking for as the end result.
View 5 Replies
View Related
Feb 17, 2010
Im trying to make a formula that lets you type in your current level, and then calculates how much XP you have remaning untill you reach the max level.
The way the forumla would need to work would be something like this:
(E10) Enter Current Level:
(F10) 37 (which is my current level)
F11 - would then add cells from C37 to C70 (calculating the total amount of XP required) and then display in (F11)
Being able to say if, then is far to cpmplicated for me in excel. I'm just trying to make this for a bit of fun and am sure one of you talented people can easily do this.
View 4 Replies
View Related
Mar 18, 2014
In my financial modelling I often have a calculated number of months of inventory. This number varies. I need to use this number to calculate the actual inventory value. For eg. it may be 3.2 months of inventory; in this case I need to sum 3 cells (current month, current month -1, current month -2) plus 0.2 of the fourth cell (current month -3)
But I may need to change the number of months of inventory to, for example, 4.2. In this case I would need the sum of four cells plus 0.2 of the fifth cell etc etc.
View 2 Replies
View Related
Apr 5, 2007
I'm trying to enter the = sum formula using vba with one of the ranges in the formula being a variable. Can not seem to get the following to enter the formula correctly.
Last_cell_4 = Range("A4").End(xlDown).Offset(0, 3).Address
Last_cell_5 = Range("A4").End(xlDown).Offset(1, 15).Address
Range(Last_cell_4).Offset(1, 0).Formula = "=Sum(D4..Last_cell_5)"
View 4 Replies
View Related
Nov 23, 2012
I have a data set which is structured such that there are variable numbers of products (column A) from 1 - 48 and these repeat multiple times for each "Name" held in column B. I have attached an example of this which uses a data set with 7 entries reapeating 7 times.
I need excel to insert 2 formula for me multiple times which needs to varry according as follows
1. Calculate the average value of data in Column C - G for n cells starting at a specific cell (C2), I have inserted an example of this and highlighted it in yellow. This then needs to repeat down column C several times, the number of times this will repeat depends upon the number of different names held in column B. But I have this calculated already and stored in a cell im my main document.
2. Calculate the variance of each value in the x cells above from the average calculated in point 1 above. I have highlighted this also in yellow.
View 1 Replies
View Related
Jun 18, 2014
I would like to do the following in a copied down row where n5 is a cell that contains a number that is added to a row number in order for the range to maintain n5 rows when copied down.
=average(b1:b1+n5)
View 11 Replies
View Related
Nov 3, 2009
I'm using Excel 2000/2002. I have a workbook with 12 sheets named Jan, Feb, etc.
I want to add a new sheet (Report) with formulas in various cells to get data from a cell in a particular sheet.
For instance, in a cell of the new sheet is: =Jan!D64. I want the user to be able to select a month from a drop down list and for the formula to change sheets depending on the month selected. The formula should be: =(sheet name!)D64. I tried playing with INDIRECT, but maybe couldn't get the syntax right. I can't use macros, the Excel is on a server and they are not permitted. The end user is less knowledgeable in Excel than me.
View 2 Replies
View Related
Apr 7, 2014
Adjust this piece of code:
[Code]....
The lookup is for 00.2014, but this is to fixed. Want to use the same code next year to. So I already defined the variable 'jaar' which the user can choose with a validation. (and next year they set it to 2015).
I thought this code would do it but no luck:
[Code] ....
So what would be the correct way? Been shifting with the " " but its only make more and more mess.
View 2 Replies
View Related
Jul 14, 2008
Column A will be completely empty.
When an * is inserted into a single cell in column A, that Row number will become the variable in this equation:
=Sheet1!$G$'variable'
i.e. if i put a * in A14, then the formula should read (=Sheet1!$G$14).
View 10 Replies
View Related
Nov 8, 2011
It's probably O so simple but: Using a variable in R1C1, here's the attempt:
-----------------------------
Dim RS_Period As Double
-----------------------------
RS_Period = Sheets("Sheet1").Range("B17") - 1
-----------------------------
Range("E2:E" & LastRow).FormulaR1C1 = "=(RC[-2]-OFFSET(RC[-2],9,0))/OFFSET(RC[-2],9,0)"
-----------------------------
I lieu of the "9" I need to use the "RS_Period" which is an offset value.
View 4 Replies
View Related
Jan 8, 2012
I try to adjust chart range using variable value instead of constant value.
My current code :
ActiveSheet.ChartObjects("Chart 4").Activate
ActiveChart.SeriesCollection(1).Values = "='Check_2G'!$Z$2:$Z$32"
I need to make range ( "='Check_2G'!$Z$2:$Z$32" ) adjestable with varible like m instead of 32 in previous code.
View 2 Replies
View Related
Jan 17, 2012
I am trying place the "sum" formula into multiple cells, changing with "i" (itteration process).
Something like:
.Range(17,counter).formula = "=Sum(B2:B20)"
when the couter itterates, the same line of code should give:
.Range(17,counter).formula = "=Sum(F2:F20)"
My actual code looks like: ... which doesnt work.
.Offset(17, " & ColumnHeadCout & " + 1).FormulaR18C" & ColumnHeadCout + 1 & " = ""=SUM(R[20]C[" & ColumnHeadCout + 1 & "]:R[" & NumberStreamElem + 20 & "]C[" & ColumnHeadCout + 1 & "])"
View 9 Replies
View Related
Jun 18, 2012
I need to create a new variable according to the formula:
Suma( Foreign_Owenrship_Plant * Number of Full Time Employees)/ Suma(All Full Time employees in the sector)!
However previosly I need to filter the firms within a sector within a country according to a three digit ISIC code. Lets say in Albania, in year 2002 in the Transport sector there are 5 groups of 3 digit ISIC codes. Once I have filtered them then I can proceed with calculating the new variable. How can I do this using programming?
View 1 Replies
View Related
Nov 6, 2013
Trying to Figure out the syntax for setting range properties with a variable. Is this possible?
Code:
Sub Testing()
SomeVariable=7
.Range("B7").Formula="=Average(A & SomeVariable:C & SomeVariable)"
End Sub
View 2 Replies
View Related
Jul 25, 2007
I allocate result of formula FORMULA R1C1 into the active cells,,,AND NOW I wan to allocate it into a variable x or y (I dont want that the result appears in the spreadsheet, just into a variable to work the code!)
View 9 Replies
View Related
Mar 7, 2008
I have a macro which defines a workbook selected by the user as the name ServicingInfoFile.
The macro then proceeds to write vlookup formulas in another workbook to pull data from the ServicingInfoFile workbook.
Only problem is that the code errors out at the vlookup formulas every time.
Can I not use a Variable in a formula?
Is it just my syntax?
ActiveCell.FormulaR1C1 = _
"=VLOOKUP(RC[-1],'" & ServicingInfoBook & "'!C1:C2,2,FALSE)"
View 9 Replies
View Related
Jun 22, 2009
I am trying to write a formula in code that uses a changing variable, "X".
here is what i have thus far:
.Value = (("G" & X) + 1) - (("G" & X) + ("B" & X))
I am trying to say: ((GX)+1)-((GX+BX))
X is a variable that changes in a loop. it will be the row number. so for example:
(G18+1)-(G18+B18)....I AM APPEARNTLY NOT WRITING THE SYNTAX CORRECTLY.
View 9 Replies
View Related
Sep 16, 2009
if it is possible, to use a string variable in a Formula via VBA.
For example: ActiveCell.Formula = "=SUM(Sheet3!strVariable)"
Of course the code is not working that way. The Variable has the following structer: CellAdress;CellAdress;CellAdress... so it would perfectly fit into the formula-syntax.
Is there any possible way to do that? The reason behind it is, that I have to deal with a flexible range and I want to process this range with a formula. Actually the range is flexible, because of different filters and I only wanna count all numbers in the unhidden rows.
My varibale would then contain all celladresses, for the visible cells.
So in a nutshell: is it possible to somehow use a varible in a formula?
View 9 Replies
View Related
Apr 21, 2006
Just a quick question, is it possible to use a string variable in a Excel formula (in VBA)? Im trying to do the following in VBA
mortgageSchedName = acName & " Schedule"
Range("B6").FormulaR1C1 = "=mortgageSchedName!RC[254])"
the above results in an error because there is no such sheet as "mortgageSchedName", but I want it to access the value of that string variable.
View 6 Replies
View Related
Feb 6, 2007
I’m trying to have a transpose formula with a variable in the VBA code. The Data is in column AG, starting in row 6 but the end is always different. The transpose formula should copy the data into Column Z (also with a variable row). So if the Data is AG6:AG7 it should go for example to Z 50 and AA 50 etc.
Dim lngTransposeBottom As Long
Dim lngFormulaDataBottom As Long
Dim countnonblank As Integer, myRange As Range
Set myRange = Columns("AG:AG")
countnonblank = Application.WorksheetFunction. CountA(myRange)
Range("Z" & lngFormulaDataBottom).Offset(3, 0).Select
Range(Selection, Selection.Offset(0, countnonblank)).Select
lngTransposeBottom = Range("AG65536").End(xlUp).Row
Selection.FormulaArray = "=TRANSPOSE(R6C33,R""" & lngTransposeBottom & """C33)"
Unfortunatly I always get the following error message: “Unable to set the FormulaArray property of the Range class”. how to change the code to get it up and running?
View 3 Replies
View Related
Feb 13, 2007
G:G contains a list of integars, though some cells are blank; lets say 75 of the 100 cells in data range are < 0. I want a macro which copies a range where the number of rows = the number of values in G:G. my Macro:
Sub myMacro()
Dim rowRange As Integer
rowRange = Count("G:G")
End Sub
This, as you guessed, comes back with an error. Sub or Function not defined. Anyone the proper syntax for assigning a formula to a variable?
View 5 Replies
View Related
Aug 17, 2007
I am having an issue using vlookup with named ranges.
I have a work book with 3 sheets on, the 3rd sheet has lists defined as named ranges and is named as lists.
The first and second sheet has references to the lists on this sheet, using the validation e.g
=(named range)
I was using the following if statement =IF($E$7="web policy",web_policy,IF($E$8="NUD",BU,IF($E$8="RAC",BU,IF($E$8="IB",IB,IF($E$8="BAU",BAU,not_known)))))
But I now need to add some more to this and have decieded to use Vlookup instead.
I have the vlookup in the 3rd sheet (lists sheet) and when the vlookup result is returned it returns the list name that I need to select, the problem I am facing is using this result to produce the list on sheet 1 or sheet 2.
The vlookup I am using is =VLOOKUP('Test Conditions'!E8,AD1:AE7,2,FALSE), but I can't use this on the first sheet as validation can't look at other sheets.
I have now changed formula slightly to;=VLOOKUP(ad32,AD1:AE7,2,FALSE), AD32 contains the formula that references the first sheet, but when I paste this into the validation I get the following error.
The list source must be a delimited list, or a reference to a single row or column
View 9 Replies
View Related
Jun 8, 2006
How can i put values from cell D2:D1000 in variable like:
Startdate = "D2:D1000"
and
EndDate= "E2:E1000"
And then I need to check if date written into inputbox is between startdate and end date And it should consider startdate and end date like this in D2= first start date and in E2 = first end date and in D3 = second start date and in E3 = second end date
View 5 Replies
View Related
Jul 20, 2007
The variable, rowNumber, specifies the row to be selected. How would I modify this code to only select the 1st 8 cells in a row instead of the whole row?
Rows(rowNumber).Select
I would then like to cut the selection and paste it into row 1:
Selection.Cut
Range("A1:H1").Select
Selection.Insert Shift:=xlDown
Do I have to select this range before inserting the selection?
View 5 Replies
View Related
Feb 22, 2013
I tried to count rows from one sheet and to put this value as counter in VBA For-Next loop.
VB:
Sub Copy_ID()
'
' Copy_ID Macro
[Code]...
It ends with "Invalid qualifier" error on the counter.Formula line. I attached sample excel with macro that I listed here.
View 5 Replies
View Related
Mar 31, 2014
Is there a way to use formula (Sum in this particular case) across multiple sheets with sheet names having a particular criteria?
The sheet names are 5 digits but not sequential (cost centre numbers). I'm trying to find the total if the sheet name (number) falls within a particular range (e.g. 150xx-152xx, 153xx-168xx), with around 60 or so sheets in total.
I know it's possible to specify the range myself, or to add a blank sheet as a marker/guide to create a "sandwich" of the required sheets (e.g. =SUM(Start:End!A1)), but the cost centre ranges may change if they're changed so I'm trying to find a way to identify them as variables rather than requiring maintenance.
Although the layout of the sheets should not change (and so a macro might work..?) I think I'd prefer to find a formula (if possible).
View 1 Replies
View Related
Jan 7, 2009
I am running an array formula which is working fine except that I now need to add a further condition: that a one of a number of values in cells C1:C8 is found in range $a1:$A500. I've tried Or with comma separation and with * separations but nothing seems to work.
Can anyone advise me of the syntax?
View 9 Replies
View Related
Dec 18, 2012
want to get a formula where I can get the details of City if searched Brand wise and details of brand city wise. I also want option to search say five city names at once and get the brands available in all those cities. I have updated a excel with some dummy data.
View 7 Replies
View Related
Jun 5, 2014
In the first sheet "Sheet1", I am trying to SUM the values of column C from another sheet 'XXX'. The trick is that the name of this other sheet is a variable, like Sheets(1+i).name , "i" being an integer. I can't find the proper syntax for the formula below.
PHP Code:Â
ActiveCell.FormulaR1C1Â =Â "=SUM(XXX!C[1])"Â
View 8 Replies
View Related
