I am creating a macro needed for many worksheets. I am trying to paste a range that will be different within each worksheet. I started the macro off by locating the correct cell to start the copy from. I want to copy 11 columns across and 32 rows down from the cell I selected.
View 7 RepliesI'm trying to calculate the average for a range that begins with cell B15 and has various end points, depending on the day (since I'm pulling 2 actual years of data that strips weekends and holidays, as opposed to going back a set amount of days/years). Syntax for cell B4 to reflect the average of range B15 to LastRow? I tried several things and it didn't work. Rows 1-12 are being reserved for the summary calculations that will then be pulled into the final Dashboard.
View 1 Replies View RelatedI have a row data corresponding to the measuring of load cell per min and I need to average the values per hour. So I have a column B for the date (from 1-01-2013 to 31-01-2013, column C for the time (0:00:00 to 23:59:00), and D de values per min I want to average. I have to do the same for the rest of the month of 2013 (February, ...., December).
I would like to know if there is a way to create a formula to calculate the average of the first 60 values (to get the average of the first hour of 1-01-2013), and then copy it to get the average of the following 60 (average of the second hour in 1-01-2013) and so on.
If there is no way to do it, I would like to know if I can do it using functions like average, match, index, offset, what would be the best match of those functions.
I also tried it by doing the analysis in another tab and using the function "averageifs" with two criterias: one for the date (example 01-01-2013) and another one for the hour (example 0:00:00), but it didnt work, it show error: #value. I inserted an extra column in the data tab with just the hour (example 0:00:00) in front of the corresponding column with (example 0:01:00, 00:02:00, etc)
Equation I used for this:
=AVERAGEIFS('Data (min)'!D$6:D$43206,'Data (min)'!$A$6:$A$44646,A6,'Data (min)'!$B$6:$B$44646,B6)
=AVERAGEIFS(TAB AND COLUMN WHERE THE RAW DATA IS,RANGE OF CRITERIA 1,CRITERIA 1,RANGE CRITERIA 2,CRITERIA 2)
I got a range of data on sheet2, size changes everyday (dynamic) And in sheet1. I got a range of data and the size changes everyday as well. I need to copy the range in sheet2 to sheet1. The position would be at the cell after the last data in sheet1. e.g.
sheet1 got 105 data
I need to paste data of sheet2 start of row106 in sheet1
i am trying to copy few cells with data, and i have something like this:
Range("A3:AO" & Format(intRowCounter, "###")).Select
So this will copy all data withing those cells range, however, i want to copy only data from specific columns, ie, from column A3, and from K3:J
Sheet 1 to look into Sheet 2
> Find a certain string "name1" > if string is name, copy succeeding columns if not goes and checks another cell till it finds it.
> Then copied columns will be evaluated (sum, divide, etc)
this loops through all rows.
next problem i am seeing is what if it finds 2-5 names how can i combined all the cells copied?
I'm looking for an algorithm that does the following:
1. Open one-by-one a number of excel workbooks in a directory and copy their .UsedRange
(i.e. all sheet content in each of the workbooks).
2. Paste append one-by-one each of the workbooks .UsedRange of data into a master workbook that is already open (i.e. active workbook).
Note that the source workbooks and target master workbook contain the same format of data. So a simple copy and paste of the .UsedRange is apt.
Basically I need each .UsedRange of an opened workbook to be appended to the data from previously opened workbook in the master workbook already opened.........
I am trying to capture data for statistical analysis, but have hit a snag. As shown in attached sheet I have each day for the year broken down into hour time slots into which data will be added. As I will need to come up with a number of similar sheets in the future I was wondering if there is a way to automate through vba, a quick way to copy down the hour slots for each day, 365 times, rather than the laborious task of copy and paste manually.
View 5 Replies View RelatedWhy the following doesn't work?
Sheets("Sheet1").Range(Cells(1,1), Cells(20,1)).Copy Sheets("Sheet2").Range("A1:A20")
If I can get his to work, I will be able to use variables for the Cells arguments to give the functionality I want.
I'm using Excel 2003. I've got two different .XLS files, each with multiple sheets.
I'm trying to create a macro which will copy a range of cells from one sheet on one .XLS file (which is closed) to a specific place on a specific sheet on the current .XLS file (which is open).
So for the sake of argument:
I've got two Excel files: C:ApplesOldFile.xls and C:OrangesNewFile.xls
OldFile.xls is closed -- NewFile.xls is open and in front of me.
I'm trying to copy the data in ranges B6:C41 and F6:F41 from Sheet2 in OldFile.xls to the same ranges on Sheet6 in NewFile.xls. There are no formulas in these cells -- just data (numbers).
I keep getting error messages, failures to copy to clipboard, etc.
I have a spreadsheet that allows users to paste set data from a PDF Image (using OCR) straight into Excel and then use the MID function to split the data accordingly.
Unfortunately, the OCR isn’t too intuitive and gets it wrong sometimes.
So to counter this, in another sheet (in the same workbook) I have a manual input section, and a simple macro button that pastes this data into the same fields where the OCR text would be, so that the main sheet works exactly the same way as before.
The problem is, and most likely due to the simplicity of the sheet, if a combination of OCR pasting and manual inputting is used, when I hit the paste button, it over rides the OCR data with blank cells
In the link below I have shown what is currently happening (1, 2, 3), and an example of what I would actually like it to do (4, 5, 6).
Example - Online Spreadsheets - EditGrid
So, in the 2nd scenario, I would like “5” to recognise that the respective cells in “4” already contain data and fill them ‘Grey’. This I have already achieved with basic conditional formatting.
However, I need to take it 1 step further and say that if the parent sheets cell (Auto OCR) contains data, as well as filling cells (in sheet Manual) lock these cells off and prevent the end user from adding data and/ or being copied over to the parent sheet.
Is this possible?
The result then being the parent sheet with both OCR text and copied text from the manual input sheet.
Both sheets are protected anyway and only allow for user input in certain areas, so is it even possible to apply further protection once the sheet is locked already?
I'm trying to create a sum that gives the output with the currency format but also change column D from from D2 to the Total the currency format. (it changes based on how many customers). Here is the code
Code:
Windows("Test1.xls").Activate
Dim rng As Range
Set rng = Sheets("Sheet1").Range("D65536").End(xlUp).Offset(1, 0)
Range("D" & lastrow + 4).Select
lastrow = Cells(Rows.Count, 1).End(xlUp).Row
Cells(lastrow + 1, 4).Formula = "=sum(D2:D" & lastrow & ")"
rng.Select ("D" & lastrow)
Selection.NumberFormat = "$#,##0.00"
I know it has to do with the rng.select statement but I'm just not sure how to make it work for all of Column D from D2 to the Total/Sum.
I would like to copy a cell in v2 to from v3 to end of column v where there are values in column u.
View 4 Replies View RelatedIn the attached file, I have two columns (A and B) and the column A will vary within the range from A4:A104 and column B will vary according to A. Nevertheless column A has #N/A error which is mandatory for chart. So I am looking for a macro to do the following:
Start with cell B4 and go until value exsists for "B" (let me say for eg. B40) and select the range A4:B40 and ask the user to give name for the export file export only that selection as a tab delimited txt file.
http://www.cpearson.com/excel/imptext.htm
I looked in to the above article. But i have trouble in selecting dynamic range and to avoid #N/A error in the range.
Basically, i have a common workbook template that is used by multiple users across the business to request a cost for numerous new products.
Within the template, there is a common section at the top, where specific project information is entered. There is also a table beneath where 1 or many products can be entered, with specific information relating to that product in the same row.
All the submitted requests are uploaded via an email attachment, to a particular sharepoint directory.
What i would like to do in the master workbook is the following:-
1. Open in turn every uploaded workbook within the sharepoint directory and copy the following cells into the master workbook, each in it's own row (or next available), with the data in adjacent cells.... 1st cell to enter data is $B6.
Cells to copy from each sheet:
Common info contained within cells:
$DG$2,$N$11,$N$12,$N$19,$N$13,$AO$7,$AO$8,$AO$9,$AO$10,$AO$11,$AO$12,$AO$12,$AO$13,$AO$14,$BO$8,$BO$11,$BO$14
Product specific info: $U37, $AD37, $AH37, $DH37, $C37, $O37
Depending on the number of products requested, we need to repeat (loop?) until it finds the next blank row in the table. I have hidden a blank row in the table, so there will always be one!
All of the common information needs to be included for each product specific entry.
For each file, once the upload has been completed, i would like the file to be moved to another "archive" directory.
I have attached the template for information. The master workbook is still in development so can't share currently.
I am trying to make the cells Iam am copying paste hidden cells with all formats - seems to work fine other than the security part of them, Iam makeing a sheet for work and just trying to make it were it will not get destroyed by other users-
View 12 Replies View RelatedSay you define a public range variable called Inputworksheet and you set it to refer to the worksheet called Inputworksheet. You have a separate string variable with the value Inputworksheet. How do you get this string variable value to call/control the range variable Inputworksheet?
I am getting an excel worksheet value from a lookup function that corresponds to the name of a VBA range variable. Once I have this worksheet value, I would like to use the range variable that has the same name as the worksheet value.
I am trying to autofill dynamic ranges that have column variables (d) and row variables (x)... I am having a hard time with the syntax on this
View 9 Replies View RelatedI am working on a project to import cellular phone usage data from Sprint into a workbook.
All cells in Column A are blank. Column B contains 1 instance of the cell phone account #, followed by dates of calls made, which continues until the next cell phone account # appears, and its calls made. The # of calls made obviously varies per account #.
The dates are in date format. The cell phone account # is in text format and is formatted with blue fill.
I need to copy the cell phone account # into column A for each line that has a date value in ColumnB, but the value copied must change when it reaches the next cell phone account #, so that the calls are matched up with the cell phone account # and can be imported into SQL.
Acct #
Date
Time
City Called from
State Called From
Called #
City Called
State Called................
I am using a variable named " Totals" as a range type to refference the range in a formula. It works the way I have it.
Dim Totals As Range
Set Totals = [U37: AE37]
Now instead of the absolute refference, I would like to change the row refference by an offset of my current row, using a formula with a varriable. The columns stay the same.
I wish to copy a merged cell (3 cells) based on if only 1 of 3 cells to the right contain "X". if the top cell does not contain "X" than the merged cell is not copied. Also, is therea more elegant to copy 3 columns at a time rather than do one at a time as my code shows:
Sub CopyICUCAPU()
'
' CopyICUCAPU Macro
'
Dim i As Integer
[Code].....
I am trying to write a macro which will autofill specific columns. The macro will set the range from the start of my autofill to the end of my autofill as a constant range.
The problem I need to get around is the end of my range can always change each time I run the macro. For instance, the first time I run the macro I may only need to autofill from row 4 to row 15. The next time, I may only need to autofill from row 4 to 23 (because of user updates). How can I make the end of my range not be a constant address but variable?
I am trying to write code to select a range in a worksheet where the last cell in the range is variable.
Sub DataTest()
Dim LastColumn As Integer
Dim LastRow As Long
Dim LastCell As range
[Code].....
I have a named range, called SubjectNamesPastoral on a worksheet called Worksheets("Group to Teacher")
I can't assign the named range to the rngSubjectFamilyRangeOnSubjectUsedSheet variable in vba.
the first two lines of code work fine, the msgbox shows "E100:E105", happy days!
However when I try to assign the same range to the rngSubjectFamilyRangeOnSubjectUsedSheet variable, the debugger runs past the 'Set' line without error, but throws 'error 91' at the second msgbox.
VB:
thisString = "SubjectNames" & strSubjectFamilyOfGroup
MsgBox Range(thisString).Address
Set rngSubjectFamilyRangeOnSubjectUsedSheet = Worksheets("Group to Teacher").Range(thisString)
I am using the code below to copy a range and paste it over a variable range.
View 4 Replies View RelatedI have been working on part of the code for my spreadsheet and it works fine in the spreadsheet Databaseform however when I copied the code to my master spreadsheet Paul_PartLocDBCombo it does not work, I get the error:
Method range of object _worksheet failed
The code is then highlighted in yellow, the code is:
Set rng = wksPartsData.Range("a1", Range("a65536").End(xlUp))
Meaning this part is incorrect but I dont know why? To work it: go to Databaseform and press start. Enter 7mm in the product field and press find all. It will then return all the matching results in the userform. Its this I want to try and achieve on the other spreadsheet when the button find label is pressed.
I have a spreadsheet set up that keeps a running total of the money in my checking account. I've set up the "balance" column to only display the balance if the "debit" or "credit" columns have data. For example:
credit debit balance
3.00 12.00
2.00 10.00
5.00 15.00
______________
15.00
This way I have space to add more entries, without having to copy the formula in the "balance" column every time I add an entry (or have my balance copied all the way down the column when there are no entries that alter it). However, the problem I'm encountering is displaying the balance at the very bottom (underneath the line). I would imagine I need to somehow look up the last value in a range in the "balance" column, but am unsure of how to proceed.
I would like to work with a range of cells.
I have a headerCel (A2)and a footerCel (A20).
If I use the line
how to make such code by VBA. but i'm desperate to have it.
I need a code to copy a two different ranges from two sheets and paste them below the original ranges in each sheet "a range a sheet". And then if a clicked again the same ranges should be pasted after and so on so forth.
In my financial modelling I often have a calculated number of months of inventory. This number varies. I need to use this number to calculate the actual inventory value. For eg. it may be 3.2 months of inventory; in this case I need to sum 3 cells (current month, current month -1, current month -2) plus 0.2 of the fourth cell (current month -3)
But I may need to change the number of months of inventory to, for example, 4.2. In this case I would need the sum of four cells plus 0.2 of the fifth cell etc etc.