I have a 49 numbers in cell A1:AW1 they are not in acceding order. I want to separate all groups start from lowest number to highest giving them deferent color. As shown in example table below in cell (A2 start with nš 6 and increase up to nš 47 till cell F2 =yellow color) then Cell (G3 decrease nš 3 and increase up to nš 49 till cell L49=Green Color) and continue same process for rest ....
View 9 Replies
how to change the cell colour due to a sum increase or decrease? For example: if the amount is greater than 200, change cell colour to green. If under 200 change cell colour to yellow.
View 2 Replies View RelatedI need a formula that can work out a percentage increase or decrease from cell J2 to L2.
J2 is the current data with L2 being the previous data - so the formula would compare J2 with L2 and tell me if there is an increase or decrease shown as a percentage.
The figures fluctuate from month to month so they could be either an increase or decrease. There are over 300 entries so I can't go through each one adjusting the formula accordingly - this is why I need the formula to do the working out if it is up or down.
I have a simple spreadsheet. A value is inserted in cell B4.
I want to increase that value or decrease it by adding a button in the next cells, C4 or D4, to increase and decrease that value instead of manually typing in the new value.
I have a macro that increase a cell number and one that decreases a cell number, heres my code:
Code:
Sub Macro1()
Dim t
t = Split(Worksheets("Sheet1").Range("d5").Text, "/")
t(0) = Format(t(0) + 1, "0")
Worksheets("Sheet1").Range("d5") = Join(t, "/")
[Code] .......
So they do exactly what i want them to do but i want to put a limitation on them, so say the number in the cell is 0 then i dont want it to be able to subtract from it anymore, and say the number is 20 i dont want it to be able to add any more, i tried to put if statments into the code but no luck.
I'm dealing with the following problem. Say I have a set af values:
A B
1 567
2 546
3 567
4 554
5 572
6 543
I can easily determine the average of the values in column B (=AVERAGE(B1:B6)) But I also want to know if the average is increasing or decreasing without making a chart and trendline. Concrete: I want the cell with average (say B7) to turn green when the trendline has a positive growth and red when negative.
Simplified:
I have a this years total in A1, last years total in B1, difference +/- in C1
$1000.00___$800.00___+$200.00___+%
$800.00___$1000.00___<$200.00>___<%>
I am trying to get a % of Increase/Decrease (Between A1 and B1) in D1.
Not as a dollar amount but as a %.
I have tried Percentile and PercentRank and some other stuff. No joy.
I have a single simple question, so let's get straight to the point: I have an A column with these values:
I:::I::::::A::::::I::::::B:::::....
I==================== ....
I 1 I____40____I_________ ....
I 2 I____50____I_________.....
I 3 I____30____I_________.....
And I need each of these values increased/decreased by a constant number.
So far, I only found formulas where all cells are, say, added into a single result, as you can see here:.....
I need to be able to select a certain number (from, say, 1-20) from a drop down menu, which will decide a number of rows (filled with data) on the next sheet. As I prefer not to give anyone the sheet I'm actually working on I made a quick look-a-like which might explain this better.
A and B are different scenarios, with different values in the fake drop-down menu I made. Just to pass on the understanding of what I want the values to do. If putting a drop-down menu there is troublesome, then I can live without them. But entering a certain value in the field and getting that number of rows for a certain product is what I need. I tried searching for a function/macro to use for this, but I dont know what exactly to look for. Name, etc
Below i have example table in which Cells B2:G4 have draw numbers. In Cells I2:X4 I have numbers in 3 groups, Group start with small number and finish with highest number.
For example in row 2 first groups is 5 to 36, second group is 10 to 30 and third group is 4 to 41 and continue same for rest rows ....
How can i format my excel spreadsheet cell so that a number
10,000,000
displays as
10
in speeding up the below code as it does not seem to matter whether I use For, If loop etc - it runs too slowly. Basically we have one sheet which is input in a different timezone that needs converting to GMT... since daylight saving I wrote some code to cover the +/- 1 hour difference (this seems to work quite well) yet when it comes to converting the actual cells it runs incredibly slowly. I appreciate any help but its only the code after "Sheets("data").Unprotect" that i think needs changing. The time stamp is in column 7 - I hope this makes enough sense - which then gets converted by either 4.5 or 5.5 hours dependent on british summer time.
Sub TimeConvert()
With Application
.Calculation = xlCalculationAutomatic
. ScreenUpdating = False
.DisplayAlerts = False
.EnableEvents = False
End With
Dim FirstDate As Date
Dim Position, DayIndex, lgrow, lstrow As Long, TargetMonth As Long, Stweekday, Enweekday, Tdate As Date, TargetYear As Long, cell As Range
Dim bst As Boolean
TargetYear = Year(Now)
TargetMonth = 3
Position = "L"
DayIndex = 1
I have totals in d18 and e18 and need to find the percentage increase or decrease between the 2. E18 is last year's value and D18 is this year's value. Which formula will give me what I am looking for:
(D18-E18)/D18 or (D18-E18)/E18
How to increase & decrease numbers evenly for a spreadsheet.
I have a number in cell F16 that can be changed and for this example say it has a value of 900.
I have a number in cell F17 that is always more than cell F16, for this example lets say it is 1000.
What I'm trying to do is create 10 numbers evenly increasing away from 900 (F16) in value, & 10 numbers evenly decreasing in value away from 900 (Cell F16) but here's the catch.
What makes this tricky is that the numbers that are increasing in value away from 900 (F16) can't be bigger than the value of F17 , IE in this example the number 1000
So the formulas must evenly distribute 10 numbers BETWEEN 900 & 1000. This must have the same even distribution for the increasing numbers & decreasing numbers.
I'll attach a sheet also. So, if you say 900 is a starting point & 1000 is the ending point, what formulas would you need in each cell to evenly increase to 1000?
Also,, going the other way, decreasing, away from 900 at the same rate as the increase?
Really stuck n this 1.
Spreadsheet here: [URL] ......
Screenshot here: [URL] ......
I'll attach a spreadsheet .xls
I'm building a keypad out of commandbutton controls, and there's this strange resizing behavior with the commandbuttons. I've attached an example, as it's much easier to see than describe.... but essentially, clicking a button seems to enlargen it slightly, and then two clicks later, it 'dezooms' back to original size (even with shadows turned off). while this is not hugely noticeable individually, it feels really strange when there's a whole keypad of commandbuttons.
View 8 Replies View RelatedIs there any keyboard shortcut to increase or decrease the number of decimals shown directly (I mean without having to use ctrl + 1... etc )
View 7 Replies View RelatedI am having difficulty finding information on coding my spin button on a user form. I searched and haven't found any information. I need to do is code a spin button to increase or decrease by 1 each time it is clicked up or down. I would like it to populate to a text box on my form if that is possible.
View 3 Replies View RelatedI would like to be able to change the color of a cell in V4:AB31 and have the formula in AM10:AM13 automatically calculate the new result. As it is now the user has to press Ctrl ALT f9 for the formula to recalculate.
View 7 Replies View RelatedI have two columns. The first one (A) contains cells that have different Fill colors. The second column (B) contains text adjacent to the colored cells. I am trying to change the color of the text in the second column (B) to the corresponding color in the adjacent cell in the first column (A). I don't think conditional formating works well in this situation. I believe the solution would be some sort of macro.
View 3 Replies View RelatedI have font color white in blank cells in column E and I (from row 5 to row 245) so the visitors will not see the text. If any of these cells become yellow (color code is 6), the font color will become black so visitors can see the text alot far better than white. I've tried this code myself after this post but nothing happen
View 4 Replies View RelatedI have various row cells in column (F) filled with the color Green. And corresponding text in Column G. How can I change the text of that particular row to white.
i.e.: if any cell in column F is Green, change the text color of that row in Column G to white?
I have a drop down sub pasted to worksheet:
Private Sub ComboBox1_Change()
ComboBox1.List = Array(100, 200, 300, 400)
If Range("I11").Value < Range("N11").Value Then
If Sheets("Profile").Range("K18").Value < ComboBox1.Value Then
Range("I11").Interior.ColorIndex = 2
Else
Range("I11").Interior.ColorIndex = 3
End If
End If
End Sub
I want it to change the cell color on drop down change. How can I modify things to have the change in drop down selection?
My macro works fine but I'm interested in seeing if I can speed it up. What I'm doing is starting at the bottom and comparing it with the row above and if they match in font color it will fill the top with orange and delete the bottom. This works but usually takes several minutes.
Public Sub ADMINCompareList()
Dim varTest1, varTest2
Dim lng As Long, i As Integer, iTest As Integer
Application. ScreenUpdating = False
Worksheets("ADMIN").Activate
For lng = ActiveSheet.UsedRange.Rows.Count To 2 Step -1
If Not Range("M" & lng).Font.Color <> Range("M" & lng - 1).Font.Color Then
Goto newrow
End If
varTest1 = Intersect(Range("J:W"), Rows(lng))
varTest2 = Intersect(Range("J:W"), Rows(lng - 1))
For i = 1 To 14....................................
What formula do i use if i want the text in cell A1 to change to red if any entry is made in cell B1.
View 2 Replies View RelatedI am having some color problems. From A2:AB2000 I have different fill colors for cells all over the place. The only color I need is the color purple which I believe is the color 39.
So basically all cells except the cells with the color purple change to white from A2:AB2000. I would like to add this code to the macro I have already created.
I'm trying to put together a script which changes the color of the row in columns A:AE if any cell in the Range B7:B400 has the value of 'No'. If it has the value of 'Yes' I would like it to Exit Sub.
I've put together the code below to try an create this function, but I'm running into a few problems.
Code:
If Intersect(Target, Range("B7:B400")) Is Nothing Then Exit Sub
If Selection.Cells.Count > 1 Then Exit Sub
If Target "No" Then[code]....
When the value of any cell in Range B7:B400 is 'Yes' the row changes to grey, if I enter 'No' it removes all cell shading from the row, and I'm not very clear on what changes I need to make.
I've got some spread sheets that I send out. People fill them out and send them back to me. The only problem is that I dont know which cells they've changed and which cells they've left. Is thier a way to tell VB to change the color of a cell if the value has changed
View 9 Replies View RelatedI have to check a cell to see if ti has a date in it, if so , then i have to check the current date to another cell, if the current date is greater then that cell i want to change the color of the cell
When I click on a button I would like an option to cancel a row range of cells by turning the writing red with a cross through it.
So if I wanted to cancel a certain row of data I would click on a button, enter the range of cells to cancel and then this would turn all of the writing in the cells to red colour with a strike through the words.
i need to add this in a macro that i previously created
here is what i need, i hope its clear for everyone to understand
I want to be able to change a color of a row to purple if a cell is greater than 5 days
so basically what i need is something like this
IF BQ1 has the data "APPROVED" and data in BP1 is 01/04/10 and BN1 is blank and if BN1 is blank after 5 days of BP1 then the color of this row changes to purple
