Change Find Sequence
Mar 28, 2009I want to change the sequence of find for the below code. I want to find the last entered row, instead of first entered. Now this code find first entered row.
View 2 RepliesI want to change the sequence of find for the below code. I want to find the last entered row, instead of first entered. Now this code find first entered row.
View 2 RepliesI have a file that contains addresses in column C. I need to find any gaps in addresses.
Ex:
211 Corbin Dr
213 Corbin Drive
214 Corbin Drive
123 Apple Drive
124 Apple Dr
124 Apple Dr
127 Apple Drive
I want to identify that there is a gap between 211 Corbin and 213 Corbin and 124 and 127 Apple Drive.
Currently the address including house number are in column c. However, I split the house number into a separate column and the street address in yet another column. There are also duplicates which I have identified by using conditional formatting to highlight the duplicates.
Basically I'm trying to look up a series of numbers against a separate row of numbers and look for a match regardless or number order.
For example
If you look at the above picture I'm trying to do a query of some sort that will look up the numbers in A8:G8 in then search each row in the above table ie look for the numbers in B1:J1, B2:J2,B3:J3 etc I need to be able to search each row and look for the sequence of numbers regardless of order, if there is or inst a match for all numbers it should look at the next row and so on (maybe multiple matches). If there is a match then it should display the Name located in column "A" into cell G8. In this example to Jarrad row contains the numbers located in A8:G8. If there is no match it should display "None".
I'm trying to find any easy way to do this as I have over 500 rows I'm trying to query. The number's in A8:G8 in this example could also be more or less, ie here I have included 6 numbers but this could be 3 or 9 etc.
Have this formula which works fine for finding the largest sequence in a list. (c/o Domenic from [url]
=MAX(FREQUENCY(IF('Overs-Unders'!B3:B1827"",IF(ISNUMBER(MATCH('Overs-Unders'!B3:B1827,{0,"n/a"},0)),ROW('Overs-Unders'!B3:B1827))),IF(('Overs-Unders'!B3:B1827="")+ISNA(MATCH('Overs-Unders'!B3:B1827,{0,"n/a"},0)),ROW('Overs-Unders'!B3:B1827))))
Now i need to:
(a) from the cells B5:CC5 that this formula runs through find the highest figure and return the name in Row 1 of that column.
(b) adjust above formula to get something now that ignores any run that contains 7 or more consecutive "n/a"s
(c) get a formula that counts the latest run. eg. from the bottom up (at the moment data only goes down to row 200)
I have a workbook that has 3 columns (G, H I) with numbers from 1 to 7 in each column. I want to tell excel that if a row has a particular 3 numbers in these cells then change it to a specified number. I want to do this for the entire workbook. Is this possible?
View 3 Replies View RelatedI have a workbook with several sheets that get info from sheet"Main BOM". I use a =Main BOM(a6) type formula on the top row of other sheets where info is needed and I drag that down to the end of info on the Main BOM to get the info into other shhets of the workbook.
How would I alter this code to find the last row of data on the Main BOM tab and only drag down that far? Or would I need a completly user written macro? This is a recorded macro.
Sub DragDown()
'
' DragDown Macro
' Macro recorded 2/25/2009 by David D
'
Sheets("David,Jimmy--To Proto").Select
Range("A16:E16").Select
Selection.AutoFill Destination:=Range("A16:E47"), Type:=xlFillDefault
Range("A16:E47").Select
End Sub
I have a sheet ("ORDEM"), i need paste values in sheets V1, V2 ...V5, but change array.
Look my file, i make manual result in V1
I have about 40,000 lines in Column A that have text like so...
13HMPS32TRE600001OP000000601
13L9KUPSOTE600001OP000000601
I need a formula to change all TR and OT to characters QT. I did a find and replace but its changing other columns of text that I don't need changed.
I would like to find and change certain values in a list. For example I would like to change TG1050 to 1 from a list that contains the following values
TG1050,TG10500, TG420, TG350.
When I run my VBA the 2nd Item in the list changes to 1. I also need to keep the commas seperating the value.
I have two columns of names of contiguos names. I want to copy all of them in a new column using a formula that copies the first column and when it reaches a blank cell only then move to the second column.
So basically, a formula that copies a whole column up to a blank cell and then copy the second column.
Here is the situation:
- Large block of text in one cell (1000+ words).
- I use the Find & Replace function (from the top menu) to find a specific word that may appear several times within the cell.
- Excel "highlights" the cell... but not the word specifically so I have to read all the text to find that word throughout the cell.
Please see attached example book.
In it I want to change name "G" in column A to "X" in column C.
And I want to do it for month of May in column B.
So a match won't do the trick because Name G is in 3 times so it should match on G and May from columns A and B.
How to catch this in a simple VBA line?
I have a series that comprises of two rows:
Row 1 is date
Row 2 are values
I am trying to find a formula where I can identify where in row two the value chages from positive to negative, and where it changes from positive to negative it should return the date the value changes from positive to negative ie:
ROW 1 08-Jan 09-Jan 10-Jan
ROW 2 1111 22222 -33333
The formula should identify that in row 2 the negative value occurs at -33333 and at the 10th of January.
I have a large list of students (Col a,b) who do several sports (up to 10) each, which are arranged as sport name (Col c) followed by score (col d), repeated on pairs of columns for the other 9 sports.
I need a macro to find the 4 highest scoring sports for each student in turn and to highlight the score and sport cells. I have tried to find permutations using the LARGE function but I cannot see how I can do this.
I have 3 columns containing id, item, colour. I want to check for duplicate id's in the id column and where duplicates are found merge the colours into one cell, as follows:
iditemcolour
1245bookred
1245bookorange
1245bookblue
1456chairred
1367chairgreen
1876tablewhite
1876tablebrown
would become
iditemcolour
1245bookred,orange,blue
1456chairred
1367chairgreen
1876tablewhite,brown
how to write macros. Here is what i need:
-I need the macro to only search within column "B"
-There is both a date and time within the cell, the time is always " 00:00:00" and I need it to be replaced with blank/ ""
- The date is represented "1/1/2013" and i need the "/" to be turned into "-"
- and i need the number format to be changed to a custom format of "m-d-yyyy"
Private Sub Worksheet_Change(ByVal Target As Range)
Application.EnableEvents = False
If Target.Count > 1 Then Exit Sub
If Target.Column = 1 Then
If Target = "" Then
Cells(Target.Row, 3).ClearContents
Else: If Target.Value = "test" Then Cells(Target.Row, 3) = my.Email.co.uk
End If
End If
Application.EnableEvents = True
End Sub
Basically, my target column is column A, i have 200 employee numbers, now we have to find the email addresses manually which is useless so i want to spend the time writing some code like:
If the target column is 123456 then the offset column D is email address
If the target column is 654321 then the offset column D value is email address.
I have 200 statements like this ill need to add unless anyone has any suggestions, perhaps select case structure?? I dont really know where to start an so i await your replies.
I need to create a macro that will examine a range of cells, for example D12:T12, find the cell with the largest number value in that range then set the font for that cell to bold (or red, or change the cell background color).
View 2 Replies View RelatedI have the table, as shown on left in the appended image, and the final result should be the right one.
The steps are written as 1, 2, 3 and 4.
Untitled.png
I am acquiring multiple spreadsheets that do not always match row number, due to additional information on some sheets. By this I mean that the information may be in row 31 on on sheet and row 39 on another, the column location is the same each time. I have been trying Vlookups, indexing and matching plus combination formulas - with no luck. How to get the information I need with a moving cell reference?
I can provide a small copy of a workbook, if needed.
I have in column " A" 500 rows with numbers in random sequences each
sequence has random number of rows , each sequence is seperated with a blank
cell (the result of a formula) some sequences have zerrows included.
I need to find the lowest number in each sequence and put that number in
column
" B" I also need to find the highest number and put that number in column "
C"
eg:- A B C
4 2 10
6
2
8
10
blank cell
7 7 50
9
11
13
50
18
21
30
15
blank cell
3 1 17
5
0
1
0
0
17
6
some sequences have two or more of the same numbers , in case of two ore
more of the same numbers only one is needed
I would like to create a column with letters from alphabet in a sequence. If I write A and in cell below I put B then highlight the two cells and drag down I get a repetition of A and B. How do I get the following alphabet letters ie. C,D, E etc.?
View 7 Replies View RelatedI have code that adds the content of a userform directly onto the next available row starting at column B, using:
View 3 Replies View RelatedI have Excel 2003. I am trying to find the next number in a sequence of numbers. The number range is 1-59, and the sequence is 89 numbers that go like:
1
5
8
3
7
10
6
2
5
3
8
11
41,...(to the 89th number)
How can I get the Longest sequence of 3's. E.g.
CA
1
2
3
5
3
3
5
4
Need to find and then sum the sequence on a certain number. Using the number 1 in the example.
Example:
0
2
1
2
1
1
1
4
3
2
Answers: 1,3
My question is, a formula was provided to me that add's a comma and a space after a 15 digit sequence of numbers, that formula is:
=IF(MID(C378,LEN(C378)-1,1)="W",C378&" ,",C378)
And what that does is it would change data in a cell that looks like this
01-02-034-05-W2 TO 02-03-045-06-W2
To this:
01-02-034-05-W2 TO 02-03-045-06-W2 ,
The formula works great, thanks to the help of the posters!
However I just ran into an issue, what if I have a set of data in a cell that looks like this:
01-02-034-05-W2 TO 02-03-045-07-W2
02-02-034-05-W2 TO 02-03-045-07-W2
03-02-034-05-W2 TO 02-03-045-07-W2
And I need a space and a comma at the end of each sequence, so the above would change to this after the formula is applied:
01-02-034-05-W2 TO 02-03-045-07-W2 ,
02-02-034-05-W2 TO 02-03-045-07-W2 ,
03-02-034-05-W2 TO 02-03-045-07-W2 ,
Now the data in the cell is wrapped so it lists one set of numbers, then the next set, then the next set as seen above.
I'm trying to write some code to calculate the value of a Fibonacci Sequence, at a random point in the sequence.
For example if I have 5, 15, 30, 50, 75, 105... and my random value is 3 it would return 30.
Being new to VB the only way I've of thought of to do this is a massive if then statement.
I have a dynamic worksheet containing a variable number of rows that I would like to have automatically numbered when I run my VBA script. I used Dave Hawley's code as follows, with a modification to begin at cell A2, but it doesn't seem to work, as it only numbers cell A2 and not the rest.
VB:
With Range("A2")
.Value = 1
.AutoFill .Range("A2:A" & RowTotal), xlLinearTrend
.Range("A" & RowTotal + 1).Clear
End With
RowTotal is just a variable that holds the results of a simple last row finder. How to make this work?
I'm trying to automate a sequence.
I was gonna explain it but I couldn't make myself clear so I took a screenshot:
sequence.PNG
folder_type is what the user types, (for example, the letter "A"), and folder_code is a sequence that should auto-generate according to what was manually inserted in the folder_type field.
What formula could I use for this process?