Change Only Specific Fonts All Sheets In Vba

Mar 17, 2009

i answered another q. here
http://www.excelforum.com/excel-work...excel-sss.html
but op wants to only change specified fonts on all worksheets to ariel and leave others intact.

View 4 Replies


ADVERTISEMENT

How To Change Column And Row Header Fonts

Mar 23, 2014

How can I change the font size on Excel Worksheet column and row headers... Not cell fonts but the Row and Column numbers outside of the table itself?

View 1 Replies View Related

Hiding Specific Sheets Along With Sheets Containing Specific Number

Dec 3, 2013

I have a workbook with the following sheets i do not want to hide called "Detailed Template", "INTERFACES", "STATUS".

I then have a number of worksheets which have their names as cell addresses i.e. "E4", "E5", "D4", "F4", "G7" and so on.

I would like to hide all worksheets (except the 3 mentioned at the top [which are sheets 1-3]) and any which contain say the value of '4'. This value is defined by a cell in the "INTERFACES" worksheet say 'A1' for example.

I want the macro to be able to automatically do this for which ever value is in 'A1'. So if it were to change to '7' it would hide every sheet that doesn't contain '7' in the name.

View 6 Replies View Related

Change Table Filter Greater And Less Than To Specific Value In Specific Cell And In Another Worksheet?

Apr 16, 2014

I would like to change the greater than number to the value in cell 'I11' in sheet 'Linear Programming Data' and the less than number to the value in cell 'I12' in sheet 'Linear Programming Data'. The code I am using was done by recording a macro since I don't know how to code in vba.

Code:
Sub Results2()
' Results2 Macro
' copy table filter power by greater than and less than
Sheets("Finalizing Results 2").Select
Cells.Select

[Code] .......

View 2 Replies View Related

Add Row If Value Value In Column Change And Paste Specific Value Depending On The Change

Mar 5, 2010

I have used the below code to insert a new row when the value in coulmn A change. I now need to evolve it so that the new row will contain a specific value depending on the changing value:

Before:
Column A Column B
one test
one test
two test
two test
three test
three test

After:

Column A Column B
one test
one test
Coz two............................

View 9 Replies View Related

Move Specific Data From Sheets To Other Sheets

Aug 19, 2008

Need to move data from 14 sheets (1 pay period=14 days)(2 showing on attachment for example purposes) to time cards for each person (number of employees will vary).

Key data to move to the time card is the date of the hours, #Reg Hours, #OT hours, the ticket# and job# for those hours.(ie Chris Adams Aug 15, need Chris's Reg and OT hours (8 Reg and 2 OT) on his time sheet, and the corresponding ticket number and job number (in this case from I1, I2).

Unknown number of ticket/job numbers, but the pattern of cell entries will remain the same along the top of the date sheets.(starting at I1, then L1, O1, the next would be R1)

Unknown number of employees but they will continue filling down where the names are on the date sheets (column A). Each employee would have a time card sheet as well.

View 5 Replies View Related

Hyperlink To Other Sheets Within Workbook When Sheets Change Name

Mar 24, 2012

I want to create a hyperlink to a sheet named "adsf"

I am currently in a worksheet named: "62b Arcus"

I want the hyperlink to be set by grabbing the name from another cell.

For example, In cell h7, I have the text: adsf

In cell g7, I want to place a formula such as: =HYPERLINK("adsf!")

Except, instead of this, I want: =HYPERLINK("h7!")

In this way, i want it to hyperlink to a sheet name based on the text that is in h7.

But neither of these formulas work. Both say the following: "Cannot Open the Specified File"

After reading up on this I have discovered that I must save the file and include the file name inside the formula.

My file name is: [Maintenance Color Codes of Houses - colour coded2.xlsm] =HYPERLINK("[Maintenance Color Codes of Houses - colour coded2.xlsm]adsf!A1","LINK")

This hyperlink actually works. Yet I have a problem. What if I rename the file. For this reason, I want it to grab the current file name using "filename". I have tried this by the following:

=MID(CELL("filename"),SEARCH("[",CELL("filename")),SUM(SEARCH("]",CELL("filename")),-SEARCH("[",CELL("filename")),1))

This grabs the current file name "Excluding the text outside of the [ and ]. I was able to create this formula myself.

How come I can't replace the part with [ and ] =HYPERLINK("[Maintenance Color Codes of Houses - colour coded2.xlsm]adsf!A1","LINK")

with:

=MID(CELL("filename"),SEARCH("[",CELL("filename")),SUM(SEARCH("]",CELL("filename")),-SEARCH("[",CELL("filename")),1))

These two formulas together would be:

=HYPERLINK("MID(CELL("filename"),SEARCH("[",CELL("filename")),SUM(SEARCH("]",CELL("filename")),-SEARCH("[",CELL("filename")),1))adsf!A1","LINK")

I also want to replace the "adsf" part with a cell number such as h7. So that it says h7!A1","LINK") or in full:

=HYPERLINK("MID(CELL("filename"),SEARCH("[",CELL("filename")),SUM(SEARCH("]",CELL("filename")),-SEARCH("[",CELL("filename")),1))h7!A1","LINK")

This doesn't work either

I know that I have probably created a ridiculous formula for what I am after. I'm almost there but not quite. You may know something far, far more simple.

View 5 Replies View Related

Combine Three Sheets Into One With Facility To Change Sheets Name?

Jun 2, 2014

Create a macro which will combine three different sheets with their names from 10 to 15 sheets.

View 1 Replies View Related

Macro To Extract Data From Specific Column To New Sheets Specific Column?

Jun 14, 2013

I'm trying to find a way to use a macro to extract data from a specific column from Sheet1 based on the columns header/title and copied into Sheet2 into the respective column with matching header/title.

For instance, in Sheet1:

Chicken
Cow
Donkey
Pig

[Code]....

So the above table would be the result i'm aiming for.

NOTE, its not different workbooks. I'm looking for sheet to sheet macro.

I've attached a file as well if someone wants to have a go at it. There are no codes in it.

View 3 Replies View Related

Lookup Not Working With Different Fonts?

Aug 20, 2014

In my table there is something wrong in array formula so that I'm not getting correct output in the table.

View 14 Replies View Related

Defaulting All Fonts To Uppercase

Mar 1, 2008

I have created a data entry spreadsheet for staff.

I need to format all data entry field to uppercase.

View 9 Replies View Related

Output Text In Different Fonts

Nov 15, 2008

I'm trying to have it output certain symbols such as "" and I can't quite figure out how to do it, i want it to basically write in the selected cell:

" of " & a & "'s = " & b

where a and b are strings... my problem is i cant figure out how to have it output the sigma but keep the letters from going into symbol or windings...

View 6 Replies View Related

Different Fonts In Chart Legend

Jan 15, 2007

I have a chart graphing different series, which includes a legend to label each series. The labels are linked to particular cells in the worksheet.

Most of the chart has Arial font formatting, but I need to change the formatting of a few characters in the legend:

I know that i can change the formatting of the whole legend, and even different entries in the legend. Is it possible to change the font of just a couple of characters in one legend entry?

Elements I need to change are:
Font type (eg from arial to symbol)
Size (varying from 8 to 14)
Bolding etc.

View 4 Replies View Related

Maximum Number Of Fonts Per Doc?

Apr 24, 2007

I am using Excel 2003 and have a spreadsheet that lists 1521 fonts. I am using VBA and looping through the list of font names in column 1 and want to put an example of the font in column 2. I am trapping for error 1004 and using Resume Next. This works fine for 480 lines and then it just stops working. No error message or anything. The only thing I could think of is there might be a maximum number of fonts allowed per spreadsheete, but I would have though I would get an error.

View 3 Replies View Related

No More New Fonts May Be Applied To This Worksheet

May 10, 2007

I have a very simple workbook in Excel 2000 with one page containing all my data which I update on a daily basis. Some of the data is linked to another workbook so that it updates each time I open it. Then I have 12 tabs, one worksheet for each month of the year with 10 simple graphs on each worksheet.

As you can see, it is a very simple worksheet. Each month, I copy and paste the graphs from the previous month into the current month and simply alter the Source Data in the graph to gather the current month's data. At the start of this month, it allowed me to copy and paste, but when I tried to alter the Source Data to the current month, I got a window on screen with a yellow triangle containing an exclamation mark and the words "No new fonts may be applied to this worksheet". If I click the OK button or the cross, it responds but the whole programme is locked. The only way I can get out is to give the 3 fingered salute and close Excel down.

View 2 Replies View Related

No More New Fonts May Be Applied In This Workbook

Oct 10, 2007

I have a workbook with 33 worksheets and more than 150 charts. Now, when I right-click on a chart to access "Source Data" for example, I get a message saying "No more new fonts may be applied in this workbook". Then I have to click "OK" about a dozen times before I get access to the dialog box. Curiously, it happens for some charts and not for some others.

View 7 Replies View Related

Fill Combobox With All Available Fonts

Jun 17, 2008

I am trying to find a quicker way to populate a ComboBox with every possible font available to the user on their particular computer in a manner other than simply using a ton of .AddItem statements.

Is it at all possible to get a user created ComboBox to essentially function the same way that the ComboBox for selecting font works normally? Or is it necessary to go through and add the statements myself?

I am creating a interface to specify default settings, one of which is font.

View 4 Replies View Related

(Form TextBox) Multiple Fonts

Jan 4, 2010

I need to use two types of fonts to not only display a string of characters in a textbox but also past to a cell as viewed in the textbox.

An example string:

[#|:.010(M)|A|N(M)|B(M)]

The above string in Arial font would look like this:

[TP|.010(M)|A|N(M)|B(M)]

I am simulating a GD&T instruction (Geometric Deimensioning and Tolerancing).

My dilema stems from the first character "[" and the last character "]".
I use both of these characters to open an instruction and close the instruction (as if all characters are surrounded by a rectangle).

What I cant figure out is how to isolate the first "[" and the last "]" (They will always be the first and last characters of an unknown string length). The first "[" would be an "Arial font" and the last would be an "Arial font" everything in between is another font (in this case Verisurf).
See attached example jpg file.
"verisurf1.jpg"

Verisurf uses both "[" and "]" as alternate characters. I only need to capture the first and last character if: 1. The first is a "[" and or the last is a "]". They will never be vice~versa.

View 4 Replies View Related

Format Fonts Based On Date

Aug 14, 2006

In the attached excel sheet you can find 2 subheadings named Safety and Waiting. Like this i have many sub headings in my excel sheets. Each sub heading contains some rows. The below is the code i used to change the Font color based on the date values.

Every thing works fine. My requirement is if any rows added under subheading "Safety" then i want to run the loop from 1 st row to last row under this subheading which will change the color based on the given date.

How to identify under which subheading the row is added and which is first row and which is last row.

Sub CycleThrough()
Dim Counter As Integer
If ActiveCell.Column = 3 And ActiveCell.Row >= 3 And ActiveCell.Row <= 8 Then
For Counter = 3 To 8
If IsDate(Worksheets("Sheet1").Cells(Counter, 3).Value) = True Then
If Date - Worksheets("Sheet1").Cells(Counter, 3).Value >= 100 Then
Worksheets("Sheet1").Cells(Counter, 3).Font.Color = 255
ElseIf (Date - Worksheets("Sheet1").Cells(Counter, 3).Value >= 70) And (Date - Worksheets("Sheet1").Cells(Counter, 3).Value <= 100) Then
Worksheets("Sheet1").Cells(Counter, 3).Font.Color = 82400
ElseIf Date - Worksheets("Sheet1").Cells(Counter, 3).Value < 70 Then.......................................

View 8 Replies View Related

Multiple Fonts- Automate Text For A Document

Mar 28, 2008

I am trying to automate text for a document. How can I combine Greek symbols and normal typing in one cell?

View 9 Replies View Related

Macro With Same Color Fonts As Cell Fill

Apr 2, 2009

I need a macro to fill any cell in any column with red color. The same cell should also have red fonts with word 'RED' typed in the cell, so that word 'RED' is invisible.

View 9 Replies View Related

Validations: Provide The Ability To Format The Fonts In The List

Nov 29, 2005

In MS Excel, I find that when the zoom is dropped to 50% the fonts in the
list become unreadable. Is there anyway that the fonts in the list have the
ability to have their own formats?

View 10 Replies View Related

Excel 2007 :: Adding Characters In A Cell With Various Fonts

Jun 18, 2013

My group is putting "marks" in Excel (2007) work papers & sometimes they may want to add additional marks to those previously added in a selected cell. What I have below actually works, but I just got my VBA book last week & there has to be a better way.

Specifically, I've saved the "target" off in the same worksheet (That can't be good.) and delete it when I'm done writing it back. Can I save the original characters virtually, or to the personal.xlsb.

Code:
Sub addMarkInCELL()
'
Dim charCount As Integer
Dim charStart As Integer
Dim rngTarget As String
charCount = ActiveCell.Characters.Count

[Code] ..........

View 2 Replies View Related

Excel 2010 :: Conditional Formatting - Different Colored Fonts In Each Cell

Mar 2, 2014

I'm new to 2010 and can't work out the new conditional formatting! I need to be able to enter a letter in A1 and have E1, F1 and G1 automatically show a different letter in each cell (different coloured fonts in each cell as well).

View 3 Replies View Related

Macro To Refresh Pivots Also Resets Chart Data Label Fonts

Aug 20, 2013

I have 6 pivot charts within a document. I use a macro associated with a button to refresh the tables and therefore the data displayed on the charts.

However, each time I refresh the data, the 'data label' font size also refreshes. What is particularly odd is that 5 of the charts are pie-graphs, of those 5 graphs, the font size only resets on 4 of them (with the data labels in a single chart staying at my desired font size).

I can manually put the font size back to that which I desire but I'd rather it just didn't change in the first place.

I've had a look to see if there's any noticeable differences between the 5 charts but there's nothing which I can find.

I'd be happy to run a bit of VBA to set the font size as I want it, if there isn't a better solution.

View 1 Replies View Related

Open Specific Sheets In A Workbook?

Aug 30, 2013

I have a work book with many sheets and staff continue to mess this up so I would like to know how I can have a specific sheet called Instructions open when this workbook is opened preferably no macro's is this possible

View 7 Replies View Related

Create Sheets With Specific Color For TAB

Mar 28, 2014

We have A,B,C,DE scenarios and we need to create 6 sheets for all the scenarios and a "Result" sheet in the spreadsheet:

ATC1.....ATC6 - All A in Black colour
BTC1.....BTC6 - All B in Yellow colour
CTC1.....CTC6 - All C some Light Blue
DETC1.......DETC6 - All D some Light Grey
Results - This will be Green color

I did a manual work around by recording a macro:
Create Sheet
Rename as ATC1
Coloured sheet as mentioned above.
Copy paste for each sheet name which will be around 25 times of the below code snippets but ofcourse change colour and change sheet names.

View 2 Replies View Related

Loop A Macro For Specific Sheets

Aug 21, 2014

How do I build a "For specific worksheets" loop?

I have a macro that works for a single sheet but I want it to loop over several. Currently, my code looks like this:

[Code] ....

View 6 Replies View Related

Protect Specific Sheets From Deletion

Dec 19, 2007

Is there anyway to prevent certain sheets from be deleted?

i know there is protect workbook, but that prevents the user from deleting any sheet

View 12 Replies View Related

Only Show Specific Data On Sheets

Dec 17, 2012

I have 1 source file that shows all the changes we made to the following 14 spreadsheets; essentially a change log.

I have 14 excel spreadsheet...the last tab in each of them have an object (the source file) captured, so they are all identical

Lets say the 14 spreadsheets are Makes of cars...(1 for Dodge, 1 for Ford, etc)...each time we make a change to the car, I log that change in the source file.

Lets say I have 33 things for dodge, 17 for Ford, 39 for Lexus, etc...all in the change log. Is there any possible way for the final tab of each of those docs, to ONLY show the changes that are specifc to that model?

My actual scenario is different, but this is the same concept and much easier to explain. If this is possible, I'd like to go a step further to know it is can be linked to the source file so it updates upon opening just like the object does now.

For what its worth, you can key off of column A in the source file....that is essentially my "Model" column.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved