Change Table Filter Greater And Less Than To Specific Value In Specific Cell And In Another Worksheet?
Apr 16, 2014
I would like to change the greater than number to the value in cell 'I11' in sheet 'Linear Programming Data' and the less than number to the value in cell 'I12' in sheet 'Linear Programming Data'. The code I am using was done by recording a macro since I don't know how to code in vba.
Code:
Sub Results2()
' Results2 Macro
' copy table filter power by greater than and less than
Sheets("Finalizing Results 2").Select
Cells.Select
Sub BrownBH() If Range("Brown!B4:B31") = X Then Range("C4").Value = [#A] Else Range("C4").Value = NT End If End Sub
However, this doesn't even work.
When somebody enters an X in a specific cell on one worksheet, it's supposed to change the value to A of a specific cell in a different worksheet. Sounds simple enough...but...
Rather then this showing all values between these dates, I was hoping to see only those two dates. This will enable my to compare weekdays for a Dashboard.
I have students Kg-5th Gr. I need to identify the ones over-aged when I enter the information. The following is what I'm trying to use but I get Y1 for ever cell. I need it to Identify the student as Y1 for One year overage and Y2 for tow years overage.
I need to use the Worksheet Change event in a particular sheet in a specified column which works fine if the data is already there in the sheet and then changed however,the data is in this sheet is actually a Sub-Set of a Main sheet i.e certain filtered records are being copied from Main Sheet and then copied to this IBSL Sheet.
After the data is copied I have to check each record manually and then categorize each record as Fresh , Rebooked , Cancelled , Tranch or On-Hold.....These 4 criterias are added in the Column 38 and the same thing has to be repeated in the column 40 , so when i change the data in the column 38 the same category has to be updated in the same row in the column 40..
But the problem is that the data is first copied from the Main Data Sheet into the IBSL Sheet using a Macro so then this even t gets fired and goes in the DEBUG MODE...
I need this to happen when i change the category manually..I am adding data validation at the same time while copying the data in to the TEMP sheet.
I have a protected template and unprotected source worksheets - - - what I would like to happen is for the macro to start and if the source worksheet cell B3 equals "Report Total" then stop - otherwise copy template worksheet then copy 6 specific cells from the source to paste values to specific cells on the newly created worksheet (B_ to C7, D_ to I7, E_ to C9, F_ to K9, A_ to C11, M_ to K11 and then K13=F13-30)
After that then start all over again unless the next row’s cell (B4, B5, B6, . . .) is "Report Total" then stop - - - the row count could be from one to a couple hundred.
Here is what I have so far but I know that with each copy the name will change and as it goes down the source file each row will change and I also need help with that.
I need in some way to make the range variable, because it can change. I need only the first range to be different.
Code: x = .Range("a4:a27").CurrentRegion.Value A4 have to be instead the cell where Denmark typed. Column A And A27 have to be the lasted used cell in column B
But after the row where it have found Denmark. Please have a look. Below code is from AB33, But this is not a cross post. Different question
Code: Sub copyp() ' Denmark Application.ScreenUpdating = 0 Dim cell As Range, i&, dic With Worksheets("Middle Result") x = .Range("a4:a27").CurrentRegion.Value
I'm trying to search through multiple worksheets (that are closed) to see if a value in cell B12 (of every worksheet) matches a value in a seperate worksheet (which is in a seperate workbook)
I have number in cell (A1) = 100. when I enter number in any cell of column(B) for example (B1)=10. then in cell (C1) the result of (A1) - (B1) = (90) and if I add in cell (B2)=10 then in cell (C1) the result of (A1) - (B1+B2) = 80 .accumulatively in cell (C1). and any number in column (B), the result will be (A1) minus any number in column(B) accumulated in (C1)
second question
I have number in cell (A1) = 100. when I enter number at cell (B1) = 10 then the result would be in the adjacent cell (C1) = (A1) - ( B1) = 90 and If I enter a new number in cell (B2) = 10 then the result would be in the adjacent cell (C2) = (A1) - (B1+B2) = 80 and If I enter a new number in cell (B3) = 10 then the result would be in the adjacent cell (C3) = (A1) - (B1+B2+B3) = 70 and so on. I want the result to be add automatically to adjacent cell in column (C)
I have a yearly running log (attached). At the bottom in cell [B88] I would like to develop a formula that gives me the number of times I ran in that specific month. Dates are in Column A and running distances are in Column B. If a distance is zero, I don't want to count it. I have attempted to solve this using the =COUNTIFS formula, but I am not able to structure it properly. Maybe =COUNTIFS is not what I should be using.
I know how to set a conditional for a cell to change a color when i apply a specific value, but how about if i want to set E2 cell to change to green when i place a 'X' on F2?
Pretty much I want 2 columns that say Yes and the Other No. When i place a X on Yes that other cell turns green, if i place a X on No that other cell turns red.
My boss wants a spreadsheet that has multiple buttons on it that will change the background color of a specific cell to four different colors. Example:
Text written in Cell B3, Button in Cell A3 that will change the Background color of Cell B3 to either Green, Yellow, Red or Blue.
There will be a lot of buttons on this worksheet following the same format as above. I don't want to change the value of what is in the cell, just the background color.
I had 2 pivot tables running on the same page (sheet 2). They both draw data from the same source (Sheet 1).
The only difference between the two is that pivottable1 has a filter for "home team", and pivottable2 has a filter for "awayteam".
I have managed to link the tables using VB so if i select "Man United" on pivottable1 - as the home team, pivottable2 also selects "Man United".
Now my problem is, that i don;t want to select the teams from the drop down check box list on the actual pivot table. I want to be able to do this by typing into a cell (say Cell A1 on sheet 3 for instance) and this controlling BOTH pivot tables.
I did have some lengthy code which worked for one pivot table, but it did not operate both and it over rode my code i had in place which works for manual filtering.
I have an Excel 2003 spreadsheet with multiple sheets - one main one with all data and others which have only the data that falls into certain criteria. I'm wondering if there's a way to enter the information on the main sheet and have it automatically populate the correct "sub-worksheet" depending on what is entered in a specific column.
I'm not describing this well but I've attached a sample of what I mean.
I have a macro assigned to a button that saves the worksheet as a PDF in a certain folder, but what I cant do is make the Macro look at a certain cell to save the file as a specific batch number.
This is the macro I have so far, I want the macro to do as below but to also look at cell L3 in the same worksheet and save it as the number what is in that cell.
I'm trying to have a macro run to search a specific column (S) for a particular text value "y" and if true it will change the font to bold and the color to red for the entire row of the cell that contains the "y". the column is part of a data table that is constantly refreshed not sure if that makes a difference or not.
I have a code and I want to run this macro whan a specific cell change (which has sum formula) and this code also has some calculation. And I m not understanding to overcome this problem through Calculate event.
I have a selection on a worksheet that has 4 consistent columns (A, B, C, and D) each with a variable number of rows all containing string type data. With this data I want to use Conditional Formatting so that when I have a string value of X in column D for any row, that whole row with the X in column D has it's color change to say grey, this should happen regardless of what strings are in Columns A, B, or C.
Below is the way I've been trying to do this thus far and failing, when I run this code below I can only get it to grey out the cell with the X not the whole row.
I need a formula or VBA macro to do the following:
I have 2 worksheets, namely sheet 1 and sheet 2. Sheet 1 contains data in columns A to H. Sheet 2 contains data only in column A.
I want Excel to check the data found in column A of Sheet 2 with those in Column A of Sheet 1. Hence, when an exact match is found in Column A of Sheet 1, Excel will delete that entire row.
