Format Based On Three Different Cells - IsError Check
Oct 30, 2013
I have a worksheet that I want to format based on three different cells. I had it set up with the following:
Code:
For i = 2 To LR
If Cells(i, 13).Value = "Price Mismatch" Then
Cells(i, 1).EntireRow.Interior.ColorIndex = 39
[Code] ........
Worked fine until one of the cells had an error in the result, I want to have this row colored also. I altered the first check to :
Code:
If Cells(i, 13).Value = "Price Mismatch" Or IsError(Cells(i, 13)) = "True" Then
I have tried multiple variations without success. I need to have the row colored if the value in the cell on the row in column 13 = Price Mismatch or is an error.
View 4 Replies
ADVERTISEMENT
Nov 27, 2009
My company uses 4 types of barcodes 8, 12, 13, & 14 number barcodes for our products my problem is that I can't figure out how to force the barcode to format properly no matter how somebody enters it if they don't use spaces or put them in the wrong spots, I can't use custom formats because there is 4 different layouts
8 digit should be "#### ####"
12 digit should be "###### ######"
13 digit should be "# ###### ######"
14 digit should be "# ## ##### ######"
these barcodes are in columns L, M, & N also right now 'm using a formula in another cell to verify the barcodes by calculating the check digit and comparing it to the check digit typed the formula i'm using is
View 9 Replies
View Related
Jun 25, 2008
How do I use the ISERROR function on a range. I have tried =ISERROR(A1:A10) but this doesn't work, it always gives the "true" output even if there is no error in that range.
View 4 Replies
View Related
Dec 18, 2008
I would like to program my check box to uncheck on any changes in Cell C4.
(C4 is part of a merged cell)
View 3 Replies
View Related
Jul 14, 2007
I have three cells where a user will input data, in some cases (2T Weld Condition) they will only enter in B12 and C12, but in the case of a 3T weld they will also enter data in the D12 cell. I then use a formula to check for the thinnest material and that is entered into another cell with a formula, B14. I then need to check the value in B14 to verify if it is above zero, but below 0.65 (mm). If it is then I would like to have a message appear on the screen notifying the user that they are outside the acceptable range.
I cannot figure out how to use the information in cell B14 because it is a formula and my code only works with a direct value. The code I am using works if I point to one of the three input cells, B12, C12 or D12. How do I use the information in B14 to work with the code below.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$B$12" Then
If Target.Value < 0.65 Then
Run "MyMacro"
End If
End If
End Sub
MyMacro loads a userform with buttons, etc.
View 4 Replies
View Related
Jan 26, 2014
We receive about 20 sales files of several hundred lines of data each day from various agencies. I want to create a macro / VBA code which checks that the data submitted is correct so that we can upload it into our database without import errors and / or having to manually check each line of data.
I envisage something like an output report:
#####################
149 entries
Column A - Date - OK
Column B - Customer_Phone - Errors (Should be 11 digits)
Row 21 - Customer_Phone - Error (Not 11 digits)
Row 108 - Customer_Phone - Error (Contains letters)
Column C - Outcome - OK
Please correct and re-check.
#####################
View 4 Replies
View Related
Feb 6, 2008
I am comparing a set of common variables across 2 sets of independent financial data. When comparing a variable across the 2 sets e.g. profit I want to colour a neighbouring cell based on the size of the difference. For example if the difference between the two values is within plus or minus 1 make it green, plus or minus 5 red etc.
View 5 Replies
View Related
Jun 14, 2008
I was wondering if anyone knows how to create a formula that is dependent on the colors of a range of cells subject to conditional formatting. For example, I would like something that could answer =if(A1 is red,"Phillies",if(A1 is blue,"Mets","Marlins)). However, the text color will be generated from conditional formatting, so most of the VBA code I have found thus far isn't working properly. Does anyone know of a solution?
View 4 Replies
View Related
Nov 6, 2013
If F2 is blank and E2 date is older than or equal to today, bold and color E2 RED.
View 2 Replies
View Related
Jan 13, 2009
In one excel file, i have a date , and i set this to "dd/mm/yy hh::mm am/pm" format. From another file i will open this file and i need to copy that date to this file. My question is , before copying i need to check it is in the "dd/mm/yy hh::mm am/pm" format using vba.
View 9 Replies
View Related
Apr 9, 2009
I want to create a conditional format formula which is based on values in 2 cells.
Example:
Cell B1 = 100
Cell C1 = 50
I want a formule for cell A1 which turns red for exmaple when B1 is higher then 85 and Cell C1 is lower then 85. Only in this case the conditional format should work.
View 8 Replies
View Related
Oct 18, 2013
Picture1.jpg
How do I create a CF if a cell is blank (in my case represent no sales) i want to have it yellow (ex. C2)
But if it has two consecutive blank cell i want to CF with Red. (Ex. F3)
But i also need to exclude blank cells when we we have no previos sales of that item (Ex.B3).
View 3 Replies
View Related
Feb 15, 2010
I have created a named range that includes raw data layed out in 4 columns (Finish Name, Fill Color, Pattern, Font Color). On a separate sheet, when one of the finish names is selected in a particular cell, I want the cells fill, pattern, and font color to change according to the raw data. Below is the vba code I am trying to get to work. However, it is not working. It does not break, but does not achieve the desired result. It looks like the variables are getting set correctly, but still not changing the cell when they are referenced. I am only testing it on the first finish color, as seen in the code. All of the rest are static values for the cell, but I want the values to be dynamic.
Sub SetFinishSeparatorColor()
ActiveCell = frmFinishSeparator.cboFinish.Value
Set rngTarget = ActiveCell
With Sheets("Pick List Do Not Tamper").Range("Finish_Cell_Color")
lngFinishCellColor = . Find(What:=rngTarget, After:=.Cells(1, 1), _
LookIn:=xlValues, LookAt:=xlWhole, SearchOrder:=xlByRows, _
SearchDirection:=xlNext, MatchCase:=False).Offset(0, 1)..............
View 2 Replies
View Related
Feb 15, 2010
I have a drawing register that contains drawing reference numbers in column D. When a new revision of a drawing is issued it is added to the bottom of the list. What I would like to do is any previous revisions to be greyed out and struck through.
The conditional formatting
= COUNTIF($D$1:$D$100,D1)>1
works well but strike through all duplicates, I need the most up to date left without the format until it is superceeded
View 2 Replies
View Related
Oct 21, 2007
If Cell A1 in my spreadsheet is 1, then cell A2 should appear formatted as a percentage. So if a user enters 9000 into cell A2, it should appear as 9000%. If Cell A1 in my spreadsheet is 2, then cell A2 should appear as a comma-formatted whole number. So if a user enters 9000 into cell A2, it should appear as 9,000. Conditional formatting doesn't appear to let me do this.
View 5 Replies
View Related
Nov 24, 2007
I want to format a group of cells color based on the value of one referance cell. Example would be: If a1 is adn "X" the the results in cells b1 thru b10 would be green else they would be blue. Is there a way to do this using Excel 97?
View 3 Replies
View Related
May 15, 2008
Cell L90 to L120 are input cells where I type " Percentage" or "Dollar Amount". I need the five cells to the right of each input cell starting two cells over, to be formatted accordingly. I read a thread similar to what I'm asking for suggesting a worksheet change macro, but I can't quite figure it out for a range of cells. Also, in case I need to add a row to my sheet before all of these cells, how can I make sure that this will still work without having to go into the code. Is this an activecell thing?
View 5 Replies
View Related
Aug 10, 2012
I have data in Row 53 that spans 7 columns, but stays in the same row. I want to design a loop to select every 7th cell in that row and check if it is empty. If not, add onto a "counter" then display the final number of occupied cells (the value of the counter) at the end. This is what I have so far, but I get all sorts of errors.
Code:
Sub Tester()
Dim WB As Workbook
Dim WS As Worksheets
Dim modCounter As Long
Dim Cell As Range
Set WB = Workbook("Transverse Series.xlsm")
Set WS = WB.Sheets(BM18)
[Code] ......
View 1 Replies
View Related
Jul 1, 2008
I have been tasked with creating a Macro in order to help speed up a rather simple set of steps that are taken to format a spreadsheet each day. The last step, however, is not so simple. I would like to add a statement to the macro code that does that following:
Based on the value of a specific cell, color the cell and all corresponding cells within the same row (from colums A to AA) yellow. Essentially, cells in column D may have a the value "No Allocation", and if they do, I will need to format that cell yellow as well as all the cells within the same row for the colume range A to AA.
View 9 Replies
View Related
Dec 23, 2009
I have a pivot table and next to it I added some calculations which are based on data from the table. In my "real" file, the cells next to the PT are formatted with conditional formatting based on other values in the sheet (see attached sample file). What I now need to do is add borders to the cells in columns “D:G” only if the cells in “B5” and downwards are not empty. I have tried doing it with conditional formatting but there are some other rules which contradict this setting.
The idea is to make the cells in columns “D:G” look like they are a natural extension on the PT. However, the table can grow or shrink (in length) and I want to see borders only around cells that are on the same rows as the data in column “B” (staring with B5). I think that whatever solution you can provide (if you can...) should be based a workbook_change event, because in my “real” file, the length of the table is changed whenever I select a different “page” of the PT.
View 8 Replies
View Related
Jan 9, 2008
I know that I need to use Conditional Formatting, but I can't get the formula code correct.
This is what I need it to do:
If cell A2 is populated (not blank) AND cell B2 is blank, then cell B2 to be highlighted in bright red fill.
If cell A2 is populated (not blank) and cell B2 is also populated (not blank), then leave formatting as per normal
If cell A2 is blank then leave formatting as per normal
Basically, as soon as someone types anything into cell A2, cell B2 to turn red. Then once they have input something into cell B2, the red highlight can disappear. The inputs will be text, not numbers, so I can't use </>
I have tried varying circumstances of IFs, ANDs, NOTs, ISBLANKs etc and I can't crack
View 5 Replies
View Related
May 4, 2014
I am looking for a method to conditionally format a variable number of cells below a single cell into which data is entered.
For example ABC = 6, DEF = 12. Therefore, if I enter ABC into D1 then D1:D6 should be conditionally formatted.
View 3 Replies
View Related
Jun 12, 2009
A1:A6 have numeric values 1 to 6.
I want the conditional format values to change Based on the value in Cell B2.
If the value in B2 is "old", then I want these conditional format conditions for A1:A6. Numbers between 1-2=green text, 3-4=orange text and 5-6=red text.
IF the value in B2 is "new" then I want the conditional format conditions in A1:A6 to change so 1=black text, 2-3=green text, 4-5=orange text and 6=red text.
I know how to do multiple conditional formats but i have no clue how to change multiple conditions based on another cells value.
View 6 Replies
View Related
Feb 22, 2010
I am trying to auto format some merged cells within a sheet based on the information in them. how to reference the information within theses cells?
View 5 Replies
View Related
Jan 29, 2014
Wondering if it is possible to conditional format cells in "Jan"-"Dec" columns based on "Next" column data?
What I need is (lets say fill colour to differ) in one cell per row, based on latest input and "next" data.
Month Avg
Date
Jan
Feb
Mar
Apr
May
Jun
Jul
[code]......
So for example:
row2: May is latest input so need fill in cell +2("next" column data) from may. In this case July
row3: Feb is latest imput and "next" also 2. Result should be Apr
row8:May is latest input, "next" is 6. Res should be Nov.
Finally, only one cell per row to be highlighted so need to overwrite colour fill when new data input in a cell already colour filled.
View 9 Replies
View Related
May 16, 2009
The following code works perfect but the "change" event is only triggered when working directly on intersect range. Tried using the "calculation" event but could not figure it out. This is what I want:
1) To replace the code provided below using the calculation event
2) To only trigger the event for the row(s) where the new value was generated, not for the whole "For Each" statement
3) To use one single code for all worksheets, instead of copying the code in every working worksheet on the workbook, if feasible
4) And I would like a "second alternative", where the user of the workbook can click on a button and trigger the event on every row on the workbook that has a non empty cell within the intersect range, assuming that the intersect range column is the same for all worksheets
Private Sub Worksheet_Change(ByVal Target As Range)
Dim c As Range, d As Range, fc As Long, bc As Long, bf As Boolean
Set d = Intersect(Range("I:I"), Target)
If d Is Nothing Then Exit Sub
For Each c In d
Select Case UCase(c)
Case "C"
fc = 1: fb = True: bc = 4
Case "O"
fc = 2: fb = True: bc = 3
Case "D"
fc = 2: fb = True: bc = 46
Case "G"
fc = 2: fb = True: bc = 5..................
View 4 Replies
View Related
Oct 24, 2013
I would like to format the color of cell A1 on Sheet 1 based on true or false values from cell range A1:A10 on sheet 2. For instance:
1. If all cells on sheet 2 in range A1:A10 were false then cell A1 on sheet 1 would be red.
2. If some cells on sheet 2 in the range A1:A10 were false and some were true then cell A1 on sheet 1 would be yellow.
3. If all cells on sheet 2 in range A1:A10 were true then cell A1 on sheet 1 would be green.
View 5 Replies
View Related
Apr 3, 2014
Code is trying to
1. Where there is data in column B
2. Goto first row of data
2. If column J = "Closed"
3. then select Cells from column B to J in that row and colour these cells in red
4. If column J= "Open"
5. the select Celss from column B to J in that row and colour these cells in grey
4. Repeat for next row until you get to cell in column B where there is no data.
Recieve run time error 1004: Method 'RAnge of object_GLobal failed
===============================================================
Sub Colourclosed()
Sheets("Risks").Select
Dim LastRow As Long
Dim i As Long
LastRow = Range("B" & Rows.Count).End(xlUp).Row
For i = 8 To LastRow
If Range("J" & i).Value = "Closed" Then Range("B", "J" & i).Select
Selection.Interior.ColorIndex = 3
[code].....
Note: I've managed to do it for one cell ie for Column B by replacing "If Range("J" & i).Value = "Closed" Then Range("B", "J" & i).Select with "If Range("J" & i).Value = "Closed" Then Range("B" & i).Select" This works but only colours in cell in column B, how do i do this so it colours range of cells
View 4 Replies
View Related
Jun 15, 2012
Check and format some data. I have 100,000+ rows so kinda need a macro to do it.
I have data like this
Sheet1 Â ABCDEFG1start_date start_time end_date end_timeTypeSOC Before SOC After
208/01/201218:36:2008/01/201218:40:00TÂ Â 308/01/201218:45:1208/01/201218:50:44TÂ Â
408/01/201218:52:1208/01/201219:50:46C3446508/01/201219:54:2708/01/201221:44:40C
[Code] .....
I'm trying to merge all the "C" rows in Column F into one row, like this:
Sheet1 Â ABCDEFG14start_date start_time end_date end_timeTypeSOC Before SOC After
1508/01/201218:36:2008/01/201218:40:00TÂ Â 1608/01/201218:45:1208/01/201218:50:44TÂ Â
1708/01/201218:52:1208/01/201223:02:00C341001809/01/201208:16:5109/01/201208:44:08TÂ Â
1909/01/201208:45:1109/01/201208:49:55TÂ Â
So you would just keep the first row,but replace the 'end date' and 'end time' with the 'end date' and 'end time' from the last row and same with the SOC.
View 1 Replies
View Related
Dec 17, 2008
I am trying to improve my expense report template and need to check on the load if expense report number has been loaded correctly as well as if this report has been previously loaded. Expense report number format looks like this: AAA-BBBBBB-CC
Where:
AAA – Employee ID #
BBBBBB – End of the week date
CC – Weekly expense report number
For instance, 023-122008-01 means: Employee number 023, week ending date 12/20/2008, weekly expense report number 01. I would like to prevent/give warning of loading incorrect expense report number format, check for possible duplicates, and check if trying to load expense report belongs to the right person (by simply matching previously loaded in different cell of the same sheet employee ID and first three digits of just loaded expense report number. I think I know how to do all of these separate, but have no idea how to combine all three checks for one cell.
View 3 Replies
View Related
