i will receive same data from two different persons in different format. By right, the data should have the same total. However, it was not.
I have attached a file that contains two worksheets with simple example to illustrate what i meant. May i know which is the effective formula to detect the mistake?
My company uses 4 types of barcodes 8, 12, 13, & 14 number barcodes for our products my problem is that I can't figure out how to force the barcode to format properly no matter how somebody enters it if they don't use spaces or put them in the wrong spots, I can't use custom formats because there is 4 different layouts
8 digit should be "#### ####"
12 digit should be "###### ######"
13 digit should be "# ###### ######"
14 digit should be "# ## ##### ######"
these barcodes are in columns L, M, & N also right now 'm using a formula in another cell to verify the barcodes by calculating the check digit and comparing it to the check digit typed the formula i'm using is
I have a Point A to Point B with the distance.
1. user can set a adjustable distance in cell J1. e.g 2000
2. User select Point A.
3. User select Point B
4. Then list out all the Point C where distance diff between Point A and Point B all within 2000.
Ok. I am creating item lists in excel for every product that my company sells. I am in need of a formula that does the following:
I want the cell to check to see if there is a value in another cell, and if there is anything at all, i want to display the word Yes as the value, or leave the cell empty.
So I want the cells in Column A to Check if the adjacent cells in Column B have a value. If the column b cells have a value I want the cells in Column A to display the word "Inventory Part". If there is no value I want the cell left blank.
I can generate from my hotel software a list that includes the check in and checkout date for a room- and the number of nights for the stay, and the total dollar amount of that stay. if anyone is willing to look what I have so far, I am attaching the smallest sample set of data I can generate and have it useful
and I have succeded in using vlookup succesfully to transfer the net room amount onto the first night of each stay on the grid.
worksheet "export tape chart" is the data generated by my hotel software-
(except for Col a-- I use this for my two way vlookup match)
I can reorder the output as needed for vlookups & offsets
worksheet "first night rate total NA" is where I have pulled the total room rate into the first night of the stay in a grid
worksheet "first night rate total clean" is just a simple cleanup of the first pulling for iserror.........
I download Quickbook reports; Once I download the reports I have to format the reports. I tried recording a macro and it worked perfectly until I added an account and it left some of the rows out. When it downloads the reports it has the row headings in different columns(I am talking about the P&L report in Quickbooks). I am trying to create a loop macro (or a macro) that will move all the row headings into the same column; If I add or delete accounts it will adjust.
View 5 Replies View Relatedfind the attached sample file and why i can't make whole dates in a same fprmat,i tried different ways but didn't work.
View 4 Replies View RelatedI have written the VBA code to color any figure above 15, but it display rows above 15 as red including other rows.
Below is the VBA code
Code:
Sub FillCells()Dim lRow As Long, lColumn As Long
'Using Cells property to refer to range
'Loop through rows
For lRow = 1 To 10
'Loop through columns
For lColumn = 1 To 5
[code].....
Which shows the output as Workbook1.jpg But my query is how to get only rows above 15 with red color
I have a 2 sheets in a workbook by the name Entry and DataStore. I am entering the daily data in Entry sheet and then manually updating the data in DataStore sheet. Is there a macro to automate this.
I have uploaded the sample file with the expected output comments to the below link:
Free large file exchange service without size limits.
When you create a pivot table and double-click on the output of the pivot repot you access the detailed info that make up this particular number.
Is it possible to preserve the format of the raw data file that has been used to create the pivot table output?
For instance, the raw data has $. When I create the pivot table I can format the table to reflect the $. However, when I double click on the pivot table number where I have the $ I access the detail info but the format (in this case $) is lost.
I called Microsoft and told me it is a flaw in Excel. But, I'd like to check with you before I give up.
If I can't do that. I have an alternative: double click on all the numbers of the pivot table then format the sheets to include the $ and then create a hyperlink from the pivot table to the detailed report tab.
I am building a tracking process for marketing and relationship management purposes. My company has a database (Advisor's Assistant - which the server is on site) that is for lack of a better term very limited. I have tried to identify if we have the capability to use SQL in excel to pull the information we want but that avenue looks bleak, since my co-worker that is pretty tech-savvy has had very little luck working with the database provider to get to information we want.
Anyway, I have determined that I can get the information I am interested in by way of several reports that the current database will do and printing them to a .pdf file. Then by way of a program called Able to Extracted I can get them into an excel format. The problem I am trying to solve is using excel to pull the information I want out of these twice converted reports into a format that means something in excel.
Only the reports reach excel they have many empty cells and some of the information is offset and does not follow the same pattern as you scroll down through the report. I have attached part of one of the reports. I would like to automate the process of searching the data and creating a new format that I can use a pivot table to create reports off.
I'm trying to get an excel custom number format to show the difference in two dates as 0 years and 0 months...for e.g.
Cell a1 = commencement date = 1/1/05
cell a2 = expiration date = 12/31/10
Then cell a3 = Lease Term = 6 years 0 months.
I use datediff to calculate the difference between 2 dates in Months.
Result = Datediff("M", Date1,Date2)
I need the result to be formatted to 2 decimal places ie 23.52 (months)
Not neccessary to use datediff if this doesnt work.
Please note I have cross posted this HERE because I couldnt get connected to ozgrid for some reason, I will montior both sites for a solution and post back results. Apologies for the inconvenience.
In one excel file, i have a date , and i set this to "dd/mm/yy hh::mm am/pm" format. From another file i will open this file and i need to copy that date to this file. My question is , before copying i need to check it is in the "dd/mm/yy hh::mm am/pm" format using vba.
View 9 Replies View RelatedError Check Marco.xlsm
see attached example. I am trying to write an error detection routine that iterates through worksheets that have numeric values for names (ignore text names or alphanumeric). Macro checks range on each numeric worksheet E3:E33 and is supposed to report back on the SummarySheet if any value other than 1 or 0 is found in range E3:E33 on any numeric-name worksheet. Code as follows:
[Code] ....
Problem is that it just reports EVERY worksheet as having an error when clearly most don't (none do I think in the attached example).
Try changing some of ranges E3:E33 to values other than 1 or 0, it still reports all sheets. Why the macro does not evaluate the range E3:E33 properly and just reports every worksheet as having an error?
I've seen a few threads on here about this issue but none of them do quite what I am looking for. I'd like for a single page "report" to be created when a user presses a button (which runs a macro, of course) The macro should be able to run through certain named sheets (even if hidden) and if a cell in any row is red within a sheet then the entire row or rows that meet the criteria should be copied and pasted into the Report sheet.
On the report sheet, for each sheet that has had rows that were copied, I'd like to have the name of the sheet as the header above the pasted rows so that the user knows which sheet the data came from. Any sheet that doesn't have red cells would be excluded from the report. I've attached a sample file but had to limit the number of sheets because of Orgrid's file size limit. Hopefully, you'll see what I am getting at here.
Check and format some data. I have 100,000+ rows so kinda need a macro to do it.
I have data like this
Sheet1 Â ABCDEFG1start_date start_time end_date end_timeTypeSOC Before SOC After
208/01/201218:36:2008/01/201218:40:00TÂ Â 308/01/201218:45:1208/01/201218:50:44TÂ Â
408/01/201218:52:1208/01/201219:50:46C3446508/01/201219:54:2708/01/201221:44:40C
[Code] .....
I'm trying to merge all the "C" rows in Column F into one row, like this:
Sheet1 Â ABCDEFG14start_date start_time end_date end_timeTypeSOC Before SOC After
1508/01/201218:36:2008/01/201218:40:00TÂ Â 1608/01/201218:45:1208/01/201218:50:44TÂ Â
1708/01/201218:52:1208/01/201223:02:00C341001809/01/201208:16:5109/01/201208:44:08TÂ Â
1909/01/201208:45:1109/01/201208:49:55TÂ Â
So you would just keep the first row,but replace the 'end date' and 'end time' with the 'end date' and 'end time' from the last row and same with the SOC.
I am trying to improve my expense report template and need to check on the load if expense report number has been loaded correctly as well as if this report has been previously loaded. Expense report number format looks like this: AAA-BBBBBB-CC
Where:
AAA – Employee ID #
BBBBBB – End of the week date
CC – Weekly expense report number
For instance, 023-122008-01 means: Employee number 023, week ending date 12/20/2008, weekly expense report number 01. I would like to prevent/give warning of loading incorrect expense report number format, check for possible duplicates, and check if trying to load expense report belongs to the right person (by simply matching previously loaded in different cell of the same sheet employee ID and first three digits of just loaded expense report number. I think I know how to do all of these separate, but have no idea how to combine all three checks for one cell.
What would be the correct formula to check the format of an address that must start with a number followed by a space then text - in cell B4
At the moment I have:
=IF(B4="","r",IF(ISERROR(SEARCH(" ",B4,1)),"r",IF(ISNUMBER(VALUE(LEFT(C5,SEARCH(" ",C5,1)-1))),"a","r")))
If it is incorrect or missing an 'r' should be displayed, an 'a' if correct
I am trying to generate a sub that read the name of a check box (which is in text format) in a spreadsheet in this case sheet13 and according to that ask if that check box which is in another sheet (sheet4) is true or false, I mean if it checked or not, then perform other actions
But I am getting this following error
Run time error ‘438’
Object doesn’t support this property or method
I tried several things but always get an error.
Does some body know how to make the checkboxname variable a valid name for the checkbox object in sheet4?
format a cell depending on the state of a check(tick) box
View 3 Replies View RelatedI have a worksheet that I want to format based on three different cells. I had it set up with the following:
Code:
For i = 2 To LR
If Cells(i, 13).Value = "Price Mismatch" Then
Cells(i, 1).EntireRow.Interior.ColorIndex = 39
[Code] ........
Worked fine until one of the cells had an error in the result, I want to have this row colored also. I altered the first check to :
Code:
If Cells(i, 13).Value = "Price Mismatch" Or IsError(Cells(i, 13)) = "True" Then
I have tried multiple variations without success. I need to have the row colored if the value in the cell on the row in column 13 = Price Mismatch or is an error.
I have two worksheets in my report cards:
1) Data - the students are listed in Column A, math scores in Column B, reading scores in Column C and science scores in Column D. The grades of 300 students are entered in this sheet.
Student
Math
Reading
Science
Jimmy
75
84
100
[code].....
2) Report Card template - This is the report card that needs to be generated for each student. It's pulling the student name and grades from the Data worksheet.
Student Name
=Data!$A2
Math
=Data!$B2
Reading
=Data!$C2
Science
=Data!$D2
How do I create worksheets (report cards) for additional students? I have 300 students in the school. I need the next worksheet to reference Data!$A3. I know how to cut and paste the report card template and then edit =Data!A2 to be =Data!A3 to create a report card for Sally. How do I create the 300 report cards I need?
I've been teaching for 13 years. I can create a report card for each student in my class and edit each worksheet individually for each student. Now I've been asked to do this for the whole school and I don't know how to create the other 299 sheets I need.
I have employee numbers in two ranges of cells where the employee number will have alpha and numeric (ASAZ002000). The first is a range of “target” employees we need to look at.(A4:A20). The second range will be all employees of the company that the target list needs to check in for the specific target employee(s).(G4:G25). If a “target” employee is found within the range of all (G4:G25) – highlight cell red (G4:G25). I have attached a small file that might explain it better.
View 2 Replies View RelatedHow do you create a macro to copy the information from my weekly reports to a monthly report and be able to update automatically. If you had 4 worksheets (for each week of the month) and 1 mastersheet for the whole month in a workbook. All titles are the same and If you needed to copy all the data that is in the columns, say, A through I, starting with row 4 to however many rows are in a given week. The reports can be made up of numicerial values, text and dates. Let me know if more information is needed or an example worksheet.
View 4 Replies View Relatedi want to ask for a reason if a item is late where M & line is the time it should have left and N & line is the actual time it left.
TL is the difrence between the two times
i want the input box to read " DRIVER DISPATCHED 30 MINUTES LATE PLEASE ENTER REASON"
but it returns "DRIVER DISPATCHED -.11233543 E2 MINUTES LATE"
how do i format this to show the difrence in minutes
TL = Range("N" & Line) - Range("M" & Line)
late = InputBox("DRIVER DISPATCHED " & TL & " MINUTES LATE PLEASE ENTER REASON")
find the attached Example file. I need to create a report either by using or without using VBA.
View 3 Replies View RelatedWe receive about 20 sales files of several hundred lines of data each day from various agencies. I want to create a macro / VBA code which checks that the data submitted is correct so that we can upload it into our database without import errors and / or having to manually check each line of data.
I envisage something like an output report:
#####################
149 entries
Column A - Date - OK
Column B - Customer_Phone - Errors (Should be 11 digits)
Row 21 - Customer_Phone - Error (Not 11 digits)
Row 108 - Customer_Phone - Error (Contains letters)
Column C - Outcome - OK
Please correct and re-check.
#####################
I have data in Row 53 that spans 7 columns, but stays in the same row. I want to design a loop to select every 7th cell in that row and check if it is empty. If not, add onto a "counter" then display the final number of occupied cells (the value of the counter) at the end. This is what I have so far, but I get all sorts of errors.
Code:
Sub Tester()
Dim WB As Workbook
Dim WS As Worksheets
Dim modCounter As Long
Dim Cell As Range
Set WB = Workbook("Transverse Series.xlsm")
Set WS = WB.Sheets(BM18)
[Code] ......
I am using this code
View 5 Replies View Related