in my spread sheet i am trying to use the if function to compare the current time ( vb code used) to a time i enter to alter another cell.
for example
if A1(current updating time) = A2 ( time i choose) then
B1( some value ) = B2( another value)
the point of this equation is to have B2 update its value from B1 every day so today B2= 3 and B1 =4 then tomorrow B2 would = 4 etc , i just dont know how to do it.
I need a way to compare the time of the computer with the one in the cell and bring up a message box if the time matches.
Yet i don't want it to be a one time makro. What i want is to be able to work with the worksheet and that at the same time i want a paralel function to check whether the time in the cell matches. Something like agenda in Outlook.
I need to changing the time data in my Time of Turn. I would like to subtract one hour from every data entry in the column Time of Turn, ie from 9:35 to 8:35, 9:55 to 8:55, etc. How would this be done with a macro for the entire workbook?
View 7 Replies View RelatedI work at a facility where we care for adults with disabilities and we need to record times that clients arrive and leave. I created an attendance check-in sheet that needs the current time entered quickly. Is there code that will allow staff to double click on a cell and have the current time entered and rounded to the nearest quarter hour?
View 1 Replies View RelatedI know there is a way to enter the current date in a cell.
But
Is there a way to prevent the previous dates enters from updating to the current dates evey day?
I need to use the Worksheet Change event in a particular sheet in a specified column which works fine if the data is already there in the sheet and then changed however,the data is in this sheet is actually a Sub-Set of a Main sheet i.e certain filtered records are being copied from Main Sheet and then copied to this IBSL Sheet.
After the data is copied I have to check each record manually and then categorize each record as Fresh , Rebooked , Cancelled , Tranch or On-Hold.....These 4 criterias are added in the Column 38 and the same thing has to be repeated in the column 40 , so when i change the data in the column 38 the same category has to be updated in the same row in the column 40..
But the problem is that the data is first copied from the Main Data Sheet into the IBSL Sheet using a Macro so then this even t gets fired and goes in the DEBUG MODE...
I need this to happen when i change the category manually..I am adding data validation at the same time while copying the data in to the TEMP sheet.
So what can be done to achieve..
I am looking for a formula to change a condition based on the time of day. Essentially, before 1pm I would like the formula to be:
=((I12/100)*25)/D12
After 1pm I would like the formula to be
=((I12/100)*25)/B12
I tried various ways with "=if(now()> ..." formulas to no avail because of the way Excel handles Now().
I want a macro to take the current time and if it is less than 09:00am, I want it to set a variable to be the current time on the previous day.
Basically, an operational day runs from 09:00am to 08:59am the following day.
08:45am on Saturday 13 July (for example) should be recorded as 08:45am on Friday 12 July.
What is the code i need to use to assign a macro to a command button which inserts the current date and time in the selected cell regardless of where that cell is?
View 5 Replies View RelatedHow do I write formula in excel cell to add current time, example 1100 + 42 minutes. 42 minutes is standard to add.
example:
1032 + 42=1114
1200 +42=1242
930 +42 = 1012
1400 +42 = 1442
In my spreadsheet, I want a macro to write date and time everytime the user change a cell with a list validation. On the table, the E column contains the status of each row. I want to know since when the status is that.
View 4 Replies View Relatedi have this excel sheet that am using as a monitoring device to track the login and log out patterns of a group of 20 agents. i am able to monitor their current state by using an external link to the local intranet and vlookup.
the status of agent can be either Logged In or Logged Out which populates in E6 to E25.
the cells f6 to f25 again running vlookup shows the last login time of the agent.
what i'm looking for is this:
every time the agent status changes from Logged In to Logged Out or visaversa, the corresponding blank cell in the row needs to populate the the time by value.
I have a spreadsheet in which I want to track the date and time someone made an entry in an adjacent cell (so if someone enters something in B2, I want the date/time of that cell edit to appear in C2).
When the date/time has appeared, I want it to remain the same and not update when the worksheet is opened the next time. So I can't use NOW to pull it in, because that's going to change every time the file is opened.
I need to record time next to eg.: W3 cell,
Now I'm using below formula :
=IF(W3<>"",NOW(),"")
but the NOW function keep updating time itself, is there any VBA code or function that I can use with this formula ?
On opening of an excel document is it possible to have a date in a cell that will continuously update. =now() enters the date required but if i was to go into the sheet days or whatever later is there a way that this will update automatically??
View 3 Replies View RelatedI have the formula:
=HYPERLINK("[Book1.xlsm]'Sheet1!A1","To Reachback")
I may however change the name of Book1, therefore rendering the hyperlink formula useless. Is there a way to enter something in place of Book1 that will return the current name of the workbook?
If there isn't, I will have to create a VBA program to update the hyperlinks, and will therefore have additional questions about that shortly.
Trying to create a macro that will add the date & time & initials (i.e 8/26/09 2:34 PM JOD) into the current cell.
I've found plenty of macro's that will do this but it ends up deleting any existing text within the cell. I need to be able to add it in the middle of a text string.
I am trying to write a formula that will have the cell display todays date if it is after 2:00PM, and if it is before 2:00PM I need the cell to display Today()-1. I have tried several iterations and I'm stumped.
View 5 Replies View RelatedI would like to be able to track progress of various tasks/occurences by allowing users of a spreadsheet to just click in the appropriate column and in doing so, it would fill in the current time and date. I.E. Column headings would read, "Item Sent to Review", "Item Received From Review", "Item Sent to Specialist", etc. and I want users to be able to double click in a given column to populate with current date/time information,
View 7 Replies View RelatedFrom sheet1 on a checkbox click I am attempting to post the system date into sheet3 cell c3. If c3 already contains data then I want the cell selection to go down to the next row and post the date there. I if cell c3 has no data then it posts fine but if I need to goto the next row then I get a runtime error "object doesn't support this property or method".
If Me.GCN = True Then
If Not IsEmpty(Worksheets("GCN_Paid").Range("c3")) Then
Sheets(3).ActiveCell.Offset(1, 0).Select
Sheets(3).Range("c3") = Date
Else
Sheets(3).Range("c3") = Date
End If
End If
I am creating a spreadsheet in Microsoft Excel 2007 which holds information about the airline Emirates which I have created using information from the internet. I am currently creating a sheet which has all their flights in and holds information about the departure time and arrival time of the flight and the type of aircraft ect. I am wondering if there is anyway in being able to have the cell which has the flight number in to change colour (Green or Red) if the flight is in the air or not by using the departure and arrival times already set on the sheet. I am wondering if you possibly need to have a live time on the sheet so that it can work with that .....
View 1 Replies View RelatedI needed a code that would input the current date and time in the cells in column N whenever changes were made to any cells in the row from columns A to M. For example, if I change a name in cell 6D, then cell 6N would automatically change to the current date and time.
I found a useful code on a forum (maybe here, don't know for certain) and modified it to suit my needs (see below). I am however now getting a debugging error suggesting that the second line that reads "Private Sub Worksheet_Calculate()" is causing an error.
I have a Macro 'Timenow' to give current time in a Cell of MS Excel, but then it changes all Cell values of sheet where the macro was used.
Sub Timenow()
'
' Timenow Macro
' Keyboard Shortcut: Ctrl+b
ActiveCell.FormulaR1C1 = "=NOW()"
Selection.NumberFormat = "h:mm"
Range("F5").Select
End Sub
Even assigning value to variable does not work:
Sub Timenow()
' Timenow Macro
' Keyboard Shortcut: Ctrl+b
Dim TN As String
TN = Format("=now()", "h:mm")
ActiveCell.Value = TN
End Sub
how to restrict the macro to change the value of current/active cell only without effecting other cell values?
I am looking to have a macro which will automatically add the username and date to a cell, when the cell above changes (or in this case =x). I have a bit of code from a previous project, but I have changed Target.Row to Target.Column and it is not behaving as I require:
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Range("B2:BZ2"), Target) Is Nothing Then
Range("C" & Target.Column).Value = Format(Date, "dd-mmm") & " " & Format(Time, "hh:mm") & " by " & (Application.UserName)
End If
End Sub
See the attachment for the example. What I need is whenever row 3 ="x" I need the corresponding cell in row "d" to update with the latest date, time and username. Please not the macro is currently not active on the sheet as i've added the ' character.
Basically I have two sets of data. One will be new each week. I'd like to use the non-changing data as a base to compare new data to. The formula would need to match multiple values, including a 'time between', and then return whether a minimum rate has been met.
SampleRateExamine.xlsx
I'm trying to look up information in "pi" by entering a time that you want to look up say 1800 or 935 and have a cell that would enter it as todays date with that time so I can use it as a timestamp in "pi"
View 1 Replies View RelatedI have two Date range in different cell and I want them two return "TRUE" value even if the start time or end time of another is earlier or later by 1-2 hours:
Example: I want to Compare Data from Cell A to B. Values should return True as it is within 1-2 hour range.
A1
B1
C1
10:00-20:00
08:00-17:00
12:15-21:15
13:45-22:45
Code to enter the current date in column if the values are entered in the adjacent column's.
View 2 Replies View RelatedAny way to enter in a total amount of time and then subtract it from a time shown. So for example:
I want to enter in a time of 26 hours, 10 minutes and 2 seconds: 72:10:02
I cannot find a format that allows me to enter the hours in excess of 24
Then I want to subtract it from a time of the day which will be entered as AM/PM: 02:40:02 AM
Then I want to show the result as a time of day: 00:30:00 AM
Lastly, I want to also show the amount of days adjustment: -1d, 00:03:00 AM
How this can be done through cell formulas?
I have a workbook with several tabs. One tab is named for the year eg 2014. Annually, I open the workbook, rename to the new year and rename the year tab to the next year eg 2014 to 2015. All the dynamic range names update as expected. Sheet2(2014) becomes Sheet2(2015). However, a line of macro code does not change and errors out because the year does not change.
Is there a way to dynamically modify the '2014' sheet reference to reflect the renaming of the year tab eg to 2015 or to reference a helper cell named YEAR?
The cell referenced above R332C1 is dynamic.
I have tried writing the above line many ways based on internet research but no success. I suspect I can use a LEN function to actually modify the line of code but I'm not sure its even possible to alter a macro dynamically to meet my needs here.