I am looking for a formula to change a condition based on the time of day. Essentially, before 1pm I would like the formula to be:
=((I12/100)*25)/D12
After 1pm I would like the formula to be
=((I12/100)*25)/B12
I tried various ways with "=if(now()> ..." formulas to no avail because of the way Excel handles Now().
I am working on a system where the system is having "australia time". Now, I want a worksheet where it should reflect the India Time after pressing a specific key in a specific cell.
View 3 Replies View RelatedI need a way to compare the time of the computer with the one in the cell and bring up a message box if the time matches.
Yet i don't want it to be a one time makro. What i want is to be able to work with the worksheet and that at the same time i want a paralel function to check whether the time in the cell matches. Something like agenda in Outlook.
The spreadsheet has over 200K rows and two dozen columns. My job is to:
1. There are two columns, one is called OCR code where we have repeating ID's and other column is called Minutes Count which is basically a number. I have to filter the OCR column for similar OCR codes(values) and then add their time(Minute Count) so that I get total minutes for a specific OCR code. After adding the min I will copy them into a new sheet with the code in one column, total minutes in another and number of repeatitions for that specific OCR code or count number in a separate column. Example:
OCR_Code; Minutes
54xg; 456
45fk; 65
23IS; 18
54xg; 971
45fk; 265
.
.
.
Now I've to filter 54xg so that I can only see it and its corresponding minutes. Then I will add up all min for 54xg. Then I will count the number of instances a 54xg has been repeated in spreadsheet(here its 2 but it can be in hundreds in my case). Last thing is to transfer all this data to a new sheet. And automatically repeat the process for other OCR codes like 45fk, 23IS etc...
I am looking for a function to convert time given by my computer (Local time) in EST (Eastern Standard Time). We are several users of a same file (with timestamp macros) and all time need to be aligned to one time zone (EST), even if all users are working in different time zone (EST, CST and IST).
View 1 Replies View RelatedI need a sum function in A1 of a "Total"-sheet that totals cell A1 in every sheet with a certain color on the tab. The number of sheets can vary from time to time.
Any idea about a dynamic sum function that will do this, in combination with VBA?
I am using the count function for attendance tracking of Vacation, Personal Time, & Sick Time. (Example: = COUNTIF($F6:$CQ6, "V")
I need to be able to do half days. I have tried many different formulas/ways to incorporate the half day scenario even without using the count function with no success.
I have two Date range in different cell and I want them two return "TRUE" value even if the start time or end time of another is earlier or later by 1-2 hours:
Example: I want to Compare Data from Cell A to B. Values should return True as it is within 1-2 hour range.
A1
B1
C1
10:00-20:00
08:00-17:00
12:15-21:15
13:45-22:45
in my spread sheet i am trying to use the if function to compare the current time ( vb code used) to a time i enter to alter another cell.
for example
if A1(current updating time) = A2 ( time i choose) then
B1( some value ) = B2( another value)
the point of this equation is to have B2 update its value from B1 every day so today B2= 3 and B1 =4 then tomorrow B2 would = 4 etc , i just dont know how to do it.
Basically I have two sets of data. One will be new each week. I'd like to use the non-changing data as a base to compare new data to. The formula would need to match multiple values, including a 'time between', and then return whether a minimum rate has been met.
SampleRateExamine.xlsx
A vehicle has been assigned to collection, time of entry appears in Load cell coresponding with vehicle eg.e vehicle 1 'A1' = load 1 'B1'. I can get the exact time to appear in the cell currently but when I try to assign a second truck, the load 2 'B2' cell AND the load 1 'B1'. Im sure that there is an easy way to do this but i just cant figure it out. Can someone please help me out. Can i disable the cell that is updating?
D: is quantity to be made
G: is number of minutes this will take
J: is the time each order should be finished
Problem
at 12:00 work stops for lunch and resumes again at 12:30
Somehow I need this to be reflected J:
Rather than manually typing the time in 5 min increments across a range of cells, i want to have a start time, then the next cell add 5 mins. EG: 09:00 next cell 09:05 and so on.
View 7 Replies View RelatedI have a worksheet which contains START TIME in column A, then TIME USAGE in column B and END TIME in column C. User enters start time, followed by the number of time usage in minutes, how could i possibly display the end time automatically in this scenario? how do you add the entered time usage to the start time to display the end time? Say if I enter 1:00 AM at start time and 00:15 minutes on time usage, how can 1:15 AM be displayed on the end time automatically?
View 2 Replies View RelatedI m Trying to add some features to it and run into an issue. Here are the fields we are working with!
A1= 13:30:00 17/12/2008
(in other words 1:30pm on date given) - Need to know proper cell number format!!
B1= 23:00:00
(this represents 23 hours) - format for cell is [h]:mm:ss
C1= Unknown function
(This field is my problem!!)
Answer here SHOULD be "14:30:00 16/12/2008"
I need a function for C1 (using A1 and B1) that will give me the time and date 23 hours earlier or however many hours:mins:secs is specified in B1! Also need to know what number format to use for both A1 and C1
I have a protected worksheet. Users wish to be able to track changes in the input cells. The suggested approach for this is to temporarily disable sheet protection and allow them to change the font color, then protect afterwards. What I would like to do is:
i) check whether they are in an input cell
ii) if so, then prompt the user with the 'Font Color' dialog box
iii) apply the font color selected to the input cell
I'm struggling to find the dialog box I need. I can launch the one to change the interior color, no problem (Application.Dialogs(xlDialogPatterns).Show). But that's no use to me, I just want a color palette that specifically relates to the Font Color
I have one column with as many as 50,000 or more rows. The data format for each row/ cell is unique as shown below ( date and time). I wanted to split the data as shown in "Formatted Data" below. Have Tried Text To Column formatting but didn't work right.
Raw Data: Formatted Data (2 cells):
2005/11/02 23:55:15.758 ==> 2005/11/02 23:55:15.758
2005/11/02 23:58:16.698 ==> 2005/11/02 23:58:16.698
2005/11/03 00:07:13.830
2005/11/03 00:10:14.971
I put the formula in cell which adds 2hrs in the current time. Now I want msgbox when the system time=time in cell. I want to do it from vba..
View 5 Replies View RelatedI have a Excel Dates & Times column where the time is not always used. In these cases the time is 12:00AM. Is there a way to Custom Formats the cell so that the time is only visible if it is not 12:00AM?
View 6 Replies View RelatedI have a problem regarding sorting data having date and also time within a single cell.
Example data (I have written it as code to preserve formatting)
A B C D E F
12/5/2008 02:072/5/2008 06:0128804833363
22/5/2008 18:012/5/2008 18:0599271297
Column B is start date and time whereas Column C is end date and time.
My aim is to cut and paste the whole row automatically to Sheet2 if the time is within 2AM to 8AM else leave as it is.Also I don't know anything about VBA Script.
The following code gives me error message. There is problem in Format function. How can I write using VBA that "Scantime is less than 08:00"
[Code].......
I want to compare Now() to a time, such as 10:00 AM, and use the formula in conditional formatting... and am having some trouble determining how to do it.
My latest attempt is
=IF(NOW() > TIMEVALUE("10:00 AM"),"t","f")
which returns "t" no matter what time I insert.
I got Excel for Mac 2011 installed. I have a table called 'Raw" that holds data from the beginning until the end of 2013 (in total ~7000 rows). I have columns for Category, Start and End time, and time period in Hours, Minutes, and Seconds:
Code:
A
B
C
D
E
F
Category
Start
End
Hours
Minutes
Seconds
Transportation
2013/01/01 01:00:00
2013/01/01 01:15:00
0:15:00
15:00
900
[Code] ...........
I'm trying to get an overview of how much time I've spent in January on Transportation. I would need to look at the Category entries for Transportation, then only use the ones which have the Start set to 2013/01, and then take the Hours/Minutes/Seconds, and summarise it in a new table called 'Data':
Code:
A
B
C
D
E
F
Month
Category
Occurrence
Hours
Minutes
Seconds
2013/01
Transportation
48
[Code] .......
I have figured out a way to count the occurrences for Transportation for January:
=COUNTIFS(Raw!B:B,">="&"2013/01/01 00:00:00"+0,Raw!B:B,"
I need to subtract the time alone as per below example:
Cell A : 2/4/2014 8:58:13 AM
I need in Cell B as : 2/4/2014 8:46:13 AM (Minus 15 minutes)
How to get this?
I have data exported from a defect management tool (that reports all the defects that have been recorded in the defect management system). This data has unique columns for name of originator, defect ID, date originated, priority, etc. The date originated column has the date and time. I want to create a report that tells me how many High, Medium and Low priority defects were created on each date - and I am using a pivot table to do this.
However, because the date column is actually the date and time the defect was reported/recorded, the time element of this is making all the dates unique eg, I have three defects recorded on 29/01/2009, a High priority defect (reported at 29/01/2009 12:23) and two Medium priority defects (reported at 29/01/2009 13:02 and 29/01/2009 13:32). My pivot table is showing each date as a unique date - with a count of 1 against each, whereas I want to see 1 date entry (for 29/01/2009) with a count of 1 against High and 2 against Medium.
I have tried custom formatting the date column to dd/mm/yyyy - which appears to work in the data (but doesn't in the pivot table, because the time stamp is still there, just not visible). I have tried copy and paste special [Values] (on the custom formatted date column) -but the time stamp is still there. I have tried formatting the date column to "General", but this changes the dates to the number format - eg 29/01/2009 12:23 becomes 39842.5166203704.
I have tried inserting a new column and using the =Left function for the first 10 characters of the cell (ie the 29/01/2009), but that gives the first 10 characters of the number form of the date, ie 39842.5166. Basically, without going into every date cell (and I have thousands) and manually deleting all the times, how do I quickly change the date column into just having the date in it (ie how do I strip off the time element)?
Excel seems to be miscalculating some formulas and I was hoping someone might have seen this before:
I'm attempting to do math on two cells and return the result in a third cell
Jx = time typed manually
AAx = time that is the result of a lookup function from data in a different worksheet
ABx = the result
Here is the formula that I am putting in ABx: =IF(ISERROR(AA39-J39),"",IF(AA39>=J39,(HOUR(AA39-J39)*60+MINUTE(AA39-J39)),-(HOUR(J39-AA39)*60+MINUTE(J39-AA39))))
J39 contains the time 18:31
and AA39 contains the time 18:30.
When the formula evaluates, the error #NUM is returned. Here are the calculation steps:
IF(FALSE,#N/A,IF(TRUE,HOUR(-.00069444444431)*60........)))
What is happening is excel is evaluating the If(AA39>=J39) as true, even when J39 contains 18:31 and AA39 contains 18:30.
I've got two time series (growth rates: what was the forecast for any particular year and what was actual growth rate for that year). I need to compare them to flag those most different. Actually I want to check the accuracy of the forecast. What would be the best function to do it?
View 5 Replies View RelatedI have a spreadsheet where an engineer is expected to record sample temperatures of water outlets, along with the time he took the sample. Each outlet has a row on the spreadsheet with a column for the Temperature and column for the time. I would like to automatically input the current time(or time and date) on each line as the temperature is entered.
View 4 Replies View RelatedI get a downloaded report from one of my application. Two columns have date and time data. I need to compare these two columns (subtract) and come up with a value in another column next to it to do some analysis on an ongoing basis.
So I know how to compare date and time in two cells but the problem I have is second set of date / time have other text mixed with it and there is some character that Find/Replace can not find (it looks like the "pipe" | character) and I can't replace or delete that character. Additionally when I click on that cell (B1 in attachment) I don't see this pipe character in the top formula section (fx) but I do see this character in the cell itself.
how I can either get rid of this character or extract just the date / time information from cell B1 to be able to compare cell A1 easily?
I am trying to get rid of some duff data by running a comparison to a fixed value on a defined range. However, the macro tries to compare the cell value (00:05:00) as a decimal value.
I think I need to use the format function to get round this.
For Each timecheckcell In range("g3:g60")
timecheckcell.Value = Format(MyTime, "h:m:s")
If timecheckcell.Value <> "00:05:00" Then timecheckcell.Offset(0, 1) = ""
Next