I have two Date range in different cell and I want them two return "TRUE" value even if the start time or end time of another is earlier or later by 1-2 hours:
Example: I want to Compare Data from Cell A to B. Values should return True as it is within 1-2 hour range.
A1
B1
C1
10:00-20:00
08:00-17:00
12:15-21:15
13:45-22:45
I am trying to find out how many weeks our current inventory will support our sales. I am trying to research formulas that will do this, and coming back with things like OFFSET, MATCH, INDEX but am not certain the best way to put them together to get what I need. I use excel daily, but this is a bit mroe advanced than I am used to
Mini.xlsx
Starting in cell B4, I would like to count how many weeks of Demand can be covered by the specific Available On Hands in row 3 for that week, put the number of "Weeks Covered" into cell B2, and then fill over to the right in row 2. Right now, the values in row 2 are from my own manual calculations, but I would like a dynamic formula that will sum up the values in row 4 up to (but not greater than) the value in B3, give the count of cells that reached that sum (or even better with decimals to show the percentage covered), which I will copy over into B3:B13. Not sure if that makes sense, or if I can explain in a better way. The yellow cells are what I am trying to create a formula for and am currently stuck.
I am looking for a formula to change a condition based on the time of day. Essentially, before 1pm I would like the formula to be:
=((I12/100)*25)/D12
After 1pm I would like the formula to be
=((I12/100)*25)/B12
I tried various ways with "=if(now()> ..." formulas to no avail because of the way Excel handles Now().
I need a way to compare the time of the computer with the one in the cell and bring up a message box if the time matches.
Yet i don't want it to be a one time makro. What i want is to be able to work with the worksheet and that at the same time i want a paralel function to check whether the time in the cell matches. Something like agenda in Outlook.
I am trying to get rid of some duff data by running a comparison to a fixed value on a defined range. However, the macro tries to compare the cell value (00:05:00) as a decimal value.
I think I need to use the format function to get round this.
For Each timecheckcell In range("g3:g60")
timecheckcell.Value = Format(MyTime, "h:m:s")
If timecheckcell.Value <> "00:05:00" Then timecheckcell.Offset(0, 1) = ""
Next
Basically I have two sets of data. One will be new each week. I'd like to use the non-changing data as a base to compare new data to. The formula would need to match multiple values, including a 'time between', and then return whether a minimum rate has been met.
SampleRateExamine.xlsx‎
in my spread sheet i am trying to use the if function to compare the current time ( vb code used) to a time i enter to alter another cell.
for example
if A1(current updating time) = A2 ( time i choose) then
B1( some value ) = B2( another value)
the point of this equation is to have B2 update its value from B1 every day so today B2= 3 and B1 =4 then tomorrow B2 would = 4 etc , i just dont know how to do it.
I have a time format in one excel sheet, I need a macro or a formula to change it into a specific format, this is to be able to import it to another software.
I have attached a file here you can see an example, this I manually, I want Row D and E into the format in A, I s it possible to make it in a macro or formula, manually it takes a long time.
File Type: csv TimeFormat.csv‎
I am trying to compare vertical range "A" in sheet1 to vertical range "K" in sheet2 if they match to copy both rows and place in sheet3. I have tried the following but it did not work.
Sub Searching()
Dim sh1 As Worksheet, sh2 As Worksheet, sh3 As Worksheet
' create short references to sheets
' inside the Sheets() use either the tab number or name
Set sh1 = Sheets("Sheet1"): Set sh2 = Sheets(2): Set sh3 = Sheets(3)
[Code] ......
I'm doing a study of wind turbines, which are spread over a test field. There are 6 turbines, each checked once a day and produces a value. I look up what the weather man says it should be, "Reported" field.
Compare141622263647
DayWind1Wind2Wind3Wind4Wind5Wind6Reported
2872 6918243519
2867122327303133
2854111324324619
28422232527284624
28319233136454627
282411182841448
2819121622264814
28016242530344549
The "Compare" field values must match all values for each turbine. The speeds identify the location with the best match speed against output of power generated. As each value in "Compared" is the best speed for that type of turbine.
Here is what I want to do:
If AND(NOT(ISBLANK(A1);A10) then B1= "NOT OK"
else
If AND(NOT(ISBLANK(A1);A1=0) then B1="OK"
End if
How to do this for a range A1:A10 in vba??
If I have a range say A1:A9 and cells A1, A2 and A5 have values in them and the rest are blank.
I want a formula that will give me the cell reference of the LAST cell in that range from left to right. ie. in this example cell A5.
I need to compare a S/n from a huge amount of datarows in sheet 1 with the s/n in a second worksheet.
If the s/n matches i need to copy the datarow from sheet 1 to sheet 2 next to the data allready existing in sheet 2. This removing the row from sheet 1.
If there is no match found in sheet 2, the row ha's to be copied to sheet 3, this also removing the datarow.
like:
sheet 1:
S/n -- name -- price
sheet 2:
S/n -- place -- stock
if match is found need to become:
S/n -- place -- stock -- S/n -- name -- price
if there is no match found data go to sheet 3.
I have a spreadsheet with two worksheets (sheet 1 and 2). Sheet 1 has all the current employee data on it e.g. employee number, Forename, Surname, Address, Pay rate, etc. Sheet 2 was last month's employee data in the same format. I want to compare the two worksheets on worksheet 3 and highlight any changes or just put the changes on worksheet 3 (this would be better).
The problem is employees might be on different rows on each worksheet and some employees might not be on one spreadsheet due to staff leaving and starting.
Each staff member has a unique employee number to identify them. So I need a formula that matches the employee number and then looks in the cells in sheet 1 and 2 and if different puts the value in sheet 1 into the cell in sheet 3.
I have column A and column B:
I will be inputting data into column B.
I need excel to check to see if the data I input into column B is an exact match to the data in column A.
If it is an exact match, then column B will remain blank.
If the data in column B is different, I need column B to show the following:
No match: <data>
Example I input in column B the following:
Column A Column B
1. Car Car
2. 4357 9999
3. fsd34d 4erd
4. 98dkf 98dkf
Spreadsheet should show:
Column A Column B
1. Car
2. 4357 No match: 9999
3. fsd34d No match: 4erd
4. 98dkf
(Cell 1 and 4 in column B are empty because they are exact matches to Column A cell 1 and 4)
My questions:
1) How does the excel formula need to be written for this to work?
2) Is there a way to set it so that when I do a mass copy to data into column B that the formula will not be overwritten and it will still check to see if the data I copy and pasted into that column matches the data next to it in column A?
I am trying to create a time formula for my own work i.e
1 to 6 min = .1 (of an Hour)
6 to 12 min = .2
13 to 18 min = .3
19 to 24 min = .4
25 to 30 min = .5
up to one hour
@ 150 an hour
So if I input in one row lets call it time 3 hours I will like in thenext row rate = 450
1.2 hours =180
6.5 hours = 950 etc
if I have a range, say 33-35, I want to put a value into a cell and compare it to that range. It will set another cell to a certain value, based on the range.
i.e. if (35 > A1 > 33)
A2 = B
elseif (37 > A1 > 35)
A2 = X
I am working on a model for a school project. Time is in ColA, the number of events is in ColB.
Each event requires one person to work before and after the event. For example, if we assume that I need one person 30 min before the event, one during the event and one 15 min after the event - ColC shows the number of staff required. I would need a formula to calculate ColC. Basically I want excel to add the values of the rows above and below a value if it is within a specified time range
It gets a little bit more complicated unfortunately, the time requirements need to be dynamic - so one day it is 30 min before the event, but another day it could only be 15 min before but 30 min after the event etc.
I was trying to do this with a SUMIF formulas, but couldn't get it to work.
Col A
Col B
Col C
7:00:00 AM
0
1
[Code] .........
I am having a hard time with this formula. How can I adjust my formula so that everything that falls outside the boundries of my given date range will have the word "DELETE" next to it? Here is what I have and it is not working....
View 9 Replies View RelatedI have data all in one column that I need to compare.It's basically the data between the 2nd and 3rd commas being compared to the data after the 2nd colon. I have over 860,000 entries in the database that this data is extracted from so I can't go through it one-by-one.
12EDM1,1,1638413100250,Match_Location_Number:1:1638413100250
VIK1,1,1638413100251,Match_Location_Number:1:1638413100251
WHI1,1,1638413100252,Match_Location_Number:1:1638413100252
HPR1,1,1638413100253,Match_Location_Number:1:1638413100253
sample macro code to compare 2 different columns from 2 different sheets. At the end there' my code
Here's the columnA in sheet1
ColumnA
ColumnB
red
orange
[Code]....
I am modifiying a macro I once used to compare cell data from a worksheet to a worksheet in the same workbook. But I am having trouble getting it to work bewtween two workbooks.
View 2 Replies View RelatedI have two worksheets.
Column A on both sheets have an ID number which is unique to clients. Sheet one will only have a client ID once but sheet two may have the same ID multiple times
I need to compare both sheets Column A and if it finds a match, then paste the cell value on column E sheet two, into column K on sheet 1.
sheet 1:
A ..........................................K
Client ID............................. name
Sheet 2:
A ...........................................E
Client ID............................. name
The following code gives me error message. There is problem in Format function. How can I write using VBA that "Scantime is less than 08:00"
[Code].......
I want to compare Now() to a time, such as 10:00 AM, and use the formula in conditional formatting... and am having some trouble determining how to do it.
My latest attempt is
=IF(NOW() > TIMEVALUE("10:00 AM"),"t","f")
which returns "t" no matter what time I insert.
I have on inventory sheet that has all the data in each cell 2612 to be exact! That changes month to month with deletions.
The format is: Sheet 2
A/B/
334702/UEMR88QX
334703/UEMR85QX
334704/UEMR81QX
334707/UEMR8JQX
The master worksheet has about 5000 items and the (A and B) data are both on it with other data ranging from (A-Y). My question is how do I have a cell look up data and return that it exists or doesn’t exist on the inventory sheet?
Master
A/B/C/D/E/
35/ 465/881676311350/311350/UEMR8ZTU
36/469/881676310722/310722/UEMR8V5V
37/483/881676310924/310924/UEMR8XYU
38/805/881676331096/331096/UEMR8J13
My other problem I need to take that months inventory list and have it look at the master list and return the system number from the master list (B) next to the matching inventory number (C). Allowing me to cross match inventory to master each month and save inventory worksheet each month.
I know I can copy the column and past is as a value so I won’t lose the numbers as the master changes but getting the data onto that months inventory has been a pain.
Excel seems to be miscalculating some formulas and I was hoping someone might have seen this before:
I'm attempting to do math on two cells and return the result in a third cell
Jx = time typed manually
AAx = time that is the result of a lookup function from data in a different worksheet
ABx = the result
Here is the formula that I am putting in ABx: =IF(ISERROR(AA39-J39),"",IF(AA39>=J39,(HOUR(AA39-J39)*60+MINUTE(AA39-J39)),-(HOUR(J39-AA39)*60+MINUTE(J39-AA39))))
J39 contains the time 18:31
and AA39 contains the time 18:30.
When the formula evaluates, the error #NUM is returned. Here are the calculation steps:
IF(FALSE,#N/A,IF(TRUE,HOUR(-.00069444444431)*60........)))
What is happening is excel is evaluating the If(AA39>=J39) as true, even when J39 contains 18:31 and AA39 contains 18:30.
I've got two time series (growth rates: what was the forecast for any particular year and what was actual growth rate for that year). I need to compare them to flag those most different. Actually I want to check the accuracy of the forecast. What would be the best function to do it?
View 5 Replies View RelatedI get a downloaded report from one of my application. Two columns have date and time data. I need to compare these two columns (subtract) and come up with a value in another column next to it to do some analysis on an ongoing basis.
So I know how to compare date and time in two cells but the problem I have is second set of date / time have other text mixed with it and there is some character that Find/Replace can not find (it looks like the "pipe" | character) and I can't replace or delete that character. Additionally when I click on that cell (B1 in attachment) I don't see this pipe character in the top formula section (fx) but I do see this character in the cell itself.
how I can either get rid of this character or extract just the date / time information from cell B1 to be able to compare cell A1 easily?
for example i have two work books where i need to compare the times, such as i need to see where does 10:26 am lies and after comparing it on workbook2 we need to return the data in a,b,c blocks infornt of 10:26am, i have tried IF(AND()) but i was not able to rationalise it for huge and random data.
Workbook1:
7/13/2013 10:26
7/13/2013 10:58
7/13/2013 12:06
7/13/2013 12:17
7/13/2013 12:29
7/13/2013 12:29
7/13/2013 12:37
7/13/2013 13:21
7/13/2013 14:24
Workbook2:
9:58:27abcassigned
11:45:09abcreleased
11:49:00ghiassigned
15:14:40ghireleased
15:25:57mnoassigned
Outout should be:
7/13/2013 10:26 a bc
7/13/2013 10:58 a bc
7/13/2013 12:06g hi
7/13/2013 12:17g hi
7/13/2013 12:29g hi
7/13/2013 12:29g h i
7/13/2013 12:37ghi
7/13/2013 13:21ghi
7/13/2013 14:24ghi
