I need 15 minutes removed from a difference in time, if the time span falls over 9:00 am through 9:15 am.
I'm inputting time like 8:30:00 in A1 and 10:30:00 in A2, then calculating the difference in A3 (2:00:00). Is there a way to remove 15 minutes from that 2:00:00, since it falls over 9 to 9:15?
I'm trying to look up information in "pi" by entering a time that you want to look up say 1800 or 935 and have a cell that would enter it as todays date with that time so I can use it as a timestamp in "pi"
I am not sure that I can do this, but here is what I would like to do. I have a worksheet that I initial when I start a job in on cell and then when I finish in another cell. What I's like is to have a macro running in the back ground that will tell me the total elapsed time from when I started to when I finished.
I have three cells... A1= entry time & H1 exit time...both are formated as such Custom #0":"00 so i don't have to enter the colon with every entry and exit time... my issue is that i want the third cell to count the minutes in cell A1 & H1...
I saw this answered somewhere on here but really didn't understand.
I'm trying to set up a sheet for my hours worked for the week.
I have the total per day in H2 through H6 In I2 through I6 I have an accumulative total for the days, so assuming I work 8 hours a day, I2 would be 8:00 I3 would be 16:00 I4 would be 24:00.
In J2 through J5, I'd like to have the weekly accululative worked hours subtracted from 40 so that the total is what I have left work until I hit 40.
Here's a simple one guys. How do I subtract 7:30 AM from 4:00 PM to give me 8.5 hours? At the moment it returns either 8:30 AM or (formatted Number - General):
I am trying to work out the response times to an event that my staff attend ( such as a fire alarm)
In C1 will be the time the event was called in, 23:55 In E1 will be the arrival time, 23:59 In F1 I want to show the time taken to arrive on site (response time)
This seems straightforward until the arrival time goes into the next day, such as 00:05 and this is when I have the problem
To make it more complicated, sometimes there is no need for an arrival time to be entered for some events ,with the end user leaving it blank or putting "NA" or "na" etc into the cell
I have tried the below formula which works to a point but leave me with an ######### error if the time is after midnight
I have the formula in my spreadsheet to compute time. It works only if the time in B1 is greater then the time in A1. I would to know if there is a formula to compute time with either negative or postive answer. For example if a carrier was set to load their papers at 12:02pm and ended up loading early at 11:50am I would like the result in C1 to be -12 or (12).
Currently I am using the formula: =HOUR(B1-A1)*6+MINUTE(B1-A1). Like I said, it is all good until someone loads early and then I get a "#NUM!"
Are there any other formula's that I can use or is there a simple modification to the formula I am using?
I have some intraday date that looks like this, hope the formatting comes thru when i post this....anyhow, the second column is TIME (ie 15:25 15:30, etc...5 minute time intervals for SP500 stock data. I want to have a column that simply subtracts row 2 column b (time column) from row 1 column b.....when i do this i get a #value....I know this must be possible to get a result i need....ie 15:30 - 15:25 = 5
Do i need to reformat the TIME column into something different? ....
In cell L7 I have (80/60)/24 and formatted h:mm to get 1:20. In cell M11 I have 1:00 (h:mm). In cell M12 I have L7-M11 and get the result 0:19. Why I'm losing a minute and not getting the result 0:20?
I have a working week that starts at 07:00 on a Monday morning and finishes at 14:30 on a Friday afternoon.
For planning purposes I need to know at any given point how many working hours are left. The reason for this is so that I can multiply that figure by the amount of Engineers available which will give me the amount of Man Hrs left in the week.
For example - if it is 11:00am on the Tuesday, how many working hours are left ....
I am having trouble finding the difference between times. I have two cells, A1, A2. Times will be placed in there each day. A1 will have the first time and A2 will have a later time that day. i.e. A1 12:25AM, A2 2:45AM. A3 would have the formula. In this case I am looking for an answer of 2:00 (2hrs).
My second issue will be times when I have A1 11:20pm and A2 1:20am. I can't seem to get it to work.
My challenge is discovering the difference in time between two rows of data that is imported with milliseconds in the time slot. In my example below I would like to see how I can subtract the time listed in line 4 from line 3 (11:18:59.566 - 11:18:59.550). When I try now I get either 1.85185E-07 or 00:00.0 or 0.000000 depending how the cell is formatted.
Using the 24hr time format in cell a1 i have a start time of 10:43 and in cell b1 i have an estimated time i think a job should take in this case 30 minutes and in cell c1 i have the actual time that job was finished in this case 11:07 and in cell d1 i have a variance between the two times which in this case would be saving me 6 minutes
I have a set of 7 years daily rainfall data. I need to calculate the daily average of rainfall from this 7 years data set. I don't wanted to calculate it by for example copying and pasting the first day rainfall of each year rainfall to a new sheet and average it for all the days. I need to calculate it all at a time.
I'm trying to auto input names from my schedule into dailytasks for my servers. Sometimes the amount of servers on a specific day changes(i.e Mondays 3 to 5 servers and Friday - Sunday there is 4-6 servers on) and times could change also as of now it works with
=VLOOKUP("6:00",AC$25:AJ$46,8,FALSE)
Not sure how to set up lookup value and return the name
I have a textbox (on a userform) that populates into a spreadsheet. the way I have it set up the user enters a time, but omits the semicolon, and a macro adjusts the time to show the semi colon in the spreadsheet, that is working great. But what I would like to do is to use a textbox change event to force the user to enter a valid time using a 24 hour clock. I have the textbox set to accept numbers from 0 to 2400, using the textbox change event but this allows the user to enter an invalid time such as "1575" basically anthing above 59 for the last 2 digits would be invalid.
I have a worksheet which contains START TIME in column A, then TIME USAGE in column B and END TIME in column C. User enters start time, followed by the number of time usage in minutes, how could i possibly display the end time automatically in this scenario? how do you add the entered time usage to the start time to display the end time? Say if I enter 1:00 AM at start time and 00:15 minutes on time usage, how can 1:15 AM be displayed on the end time automatically?
I have this code and that allows me to enter the time without using the colon but only in 2 columns, I tried to add to the range "BJ2:BJ105" but this throws an error when I try to enter the time, is there a way to use this code and set it for multiple columns?
Code: Private Sub Worksheet_Change(ByVal Target As Range) Dim TimeStr As String On Error GoTo EndMacro If Application.Intersect(Target, Range("AZ2:AZ105", "BE2:BE105")) Is Nothing Then
I am trying to create a very basic workbook that has 2 worksheets. one is a daily input for tonnes, that then just gets cut and pasted to a different program, and the other worksheet is the running total. i.e., it adds up every time you update it. been trying to figure out a macro so when you press the update button it then just updates the monthly total.
How to set a column up to show it as the time of day but unless I enter PM after I put the time in the column it always comes up as AM.
Is there some way to just enter 9:09 in column d and or f and have it show up as pm? When I enter 8:10 in column b it automatically adds the AM to it but if I do the same in the column for the night and I do not type in pm it will automatically enter it as am.
I have attached the workbook and did delete the macro - which was just to clear all of my entries but when I click to open it again I am still getting the message about the macro.
In the workbook when I enter the time in column B I can just type in 7:14 and it will automatically add the AM to it. However, when I get to column D or F if I just type in 9:09 or whatever time it is in the evening it will automatically add AM to it unless I type 9:09 pm.
Is there some way to set it up so that I can just enter the time and it will automatically enter pm for everything in that column?
I am trying to enter a blank row everytime the 2ND character of a field changes...
sample cells (ALWAYS COLUMN B)(last row needs to be calculated as it changes daily):
2T2W3D3L4H4N4N4N6C6C
when done:
2T2W3D3L4H4N4N4N6C6C
was trying this:
Code: Dim chkConfirmRw, LastNameRow As Integer For chkConfirmRw = LastNameRow To 1 Step -1 'Compare the current cell to the one below it 'If they don't match, insert a row row below the current Row If Range("B" & chkConfirmRw) Range("B" & chkConfirmRw + 1) Then Range("B" & chkConfirmRw + 1).EntireRow.Insert Shift:=xlDown End If 'Decrement the counter and do it again Next
