Converting Weekly Rankings Into Monthly Rankings
Jan 23, 2012
I have been struggling to convert an array of weekly data rankings into monthly rankings using the closest date to month end and cant seem to find a way. see below
spx indexspgsci Indexief us equityspx indexspgsci Indexief us equity
24/01/201212431/12/2011???20/01/201213430/11/201113/01/201213431/10/2011
6/01/201213430/12/201114323/12/201114316/12/20111429/12/20111322/12/201113225/11/2011132
How do I convert them to a monthly rank18/11/2011132using the closest to month end date
11/11/20111324/11/201113228/10/201113221/10/201113214/10/2011132
View 4 Replies
ADVERTISEMENT
Jul 4, 2014
How I can use a formula for inputting a persons position in a race for the scores appear automatically in the adjacent column. E.g 1st place 10 pts, 2nd 8pts etc?
View 3 Replies
View Related
Mar 24, 2009
I have more issues with this spreadsheet, which is beginning to drive me bonkers. Its a rank issue, with a few problems, questions:
Looking at the second table on the page, I want to rank the data for all colums except for column I in a descending fashion. IE - Highest to lowest. But column I needs to be ranked lowest to highest. I think I did this correctly, but I could be wrong.
Is it possable for the rankings to record equals? IE, the TO column has that, but in REB there should be another tie (9th and 10th) but there is not.
Further to this, the third table should have I28, and E35 listed as Ties. How do I do this for the entire table?
View 12 Replies
View Related
Nov 17, 2007
i have a list of names in column A and a corresponding score for each name in column S.
on a stats sheet B10:B15 was trying to make a top 5 list using =LARGE(Week1!S15:S46,1) ... with Large i am able to get my top 5 from the week1 sheet but how can i assign the corresponding top5 persons from column A15:A45 in week1 to the stats sheet in column A10:A15
View 9 Replies
View Related
Apr 14, 2006
I have ranked the times of races for 30 participants. The results are in a
column. I want to display the points given in the next column. The only
points given are for 1st through 6th place. 1st=6pts, 2nd=5pts, 3rd=4pts,
4th=3pts, 5th=2pts, 6th=1pt, 7th place through 30th place =0. Times,
therefore ranks, will change with each race, so this information needs to be
in every cell in that column.
NAME TIME RANK PTS
Joe 12.05 2 5
Mary 13.00 3 4
Sue 10.57 1 6
Sam 15.04 8 0
I figured out the rank formula, but I can't figure out how to assign the
points.
View 9 Replies
View Related
Nov 22, 2006
I have a worksheet set up as a draw sheet for a tournament. I have a set of rankings showing all points collated from last tournament. What i want to do is set up a formula/macro so that a cell containing a player eg. the winner will be found on the ranking list and the points won will be added to the next cell on the ranking list.
View 14 Replies
View Related
Feb 17, 2013
Suppose I have a table with a collection of "Top Ten" rankings for something. For example, suppose I have rankings from five "sources" for the Top Ten Ethnic Cooking. For simplicity, I'll show the top 5 here:
Rank
Source A
Source B
Source C
[Code]....
I'd like a way to calculate some sort of average ranking. I have two problems: (1) I don't know what the formula should be and (2) I don't know how to implement it in Excel.
View 8 Replies
View Related
Oct 27, 2012
Need to rank by score1 in descending order and Serial # in ascending order. My biggest problem is to get the rank number to be consecutive. I have listed the rank I would like to see.
Score1
Serial #
Rank
90
146168
1
[Code] .....
View 5 Replies
View Related
Feb 22, 2013
I am building a country ranking model which ranks several different macroeconomic indicators and applies a weighting to each of the indicators. I have an overall ranking column which is an average of all the ranks. The problem is whenever I change any of the individual indicator's weighting it obviously affects the country's overall ranking. Is there a way that the model can automatically "re-sort" the overall rankings without me having to manually click on the sort by smallest to largest filter each time?
PS I'm using Excel 2007.
View 3 Replies
View Related
Dec 22, 2008
1. I would like to be able to select a month from a drop down ( cell C4), and for Column B ('Cumulative Performance') to reflect the sum for each name between Jan and the month selected.
2. In Column D I would like to rank the relative position of the sum total; such that if I selected 'Dec', John would display '13' in D7, Anne '3' etc.
3. In Column E I would like to show by way of a coloured arrow (or even a smilie icon) the relative change in ranking of the sum totals evaluated for my chosen month with those calculated up until the previous month (e.g. for Anne, if I select June, the Jan to June total is 36 (rank 2 in the June total's), the May to Jan total for Anne is 32 (rank 1), therefore her relative rank movement between the June and May cumulatives moves down and cell E8 would show a red-down arrow (amber horizontal for no change and green up-arrow for an improvement in rank).
View 5 Replies
View Related
Mar 7, 2008
Is there a formula-based way to do the following?
Sheet 1 has last name, first name, sales, and region in columns A through D, respectively.
Sheet 2 is a rankings sheet of sheet 1. Sheet 2 contains 2 headings: Top salespersons for region A, and top salespersons for region B. I'd like for the top 2 salespersons' (in each region) names & sales amounts to appear under their appropriate region in sheet 2. I just don't know which formula to start with that would be able to look at sheet 1, sort the top salespeople in each region, then display those in the right order on sheet 2.
View 9 Replies
View Related
May 14, 2012
I've got data in E4:I4, Monday - Friday.
What I need to do, is add the total of those 5 figures in a total, but then clear the data in those 5 days.
Then when I input the data for the next week in to those days, I want it to add to the previos week.
So basically;
In week 1 the 'Total' is just week 1
In week 2, the 'Total' is week 1 & week 2'
I will only be going up to week 5. (only week 5 once in a 3 month period, so 2 4 weeks and a 5 week)
View 1 Replies
View Related
Feb 26, 2009
I assume there's a database (or pivot table?) solution for my task, which is to detect the days, weeks and months within a very long table, and obtain the totals of the data therein.
See attached worksheet.
View 8 Replies
View Related
Feb 19, 2012
I am wanting to calculate a rolling monthly average and a rolling weekly average.
The following cells have the headers k2 has Allan, Cell L2 has Bill, Cell M2 has Charlie, Cell N2 has Don, cell o2 has Ellen and Cell P2 has Flora
Column J3 to J14 respectivley has Jan to Dec
The balance of the cells will have the data.
I then need to plot the rolling averages for each person on a gaph as teh months data is filled.
Below is the table:
Monthly Totals 2012AllanBillCharlieDonEllenFloraJan0.0000.0000.0000.0000.0000.000
Feb0.0000.0000.0000.0000.0000.000Mar0.0000.0000.0000.0000.0000.000
Apr0.0000.0000.0000.0000.0000.000May0.0000.0000.0000.0000.0000.000
Jun0.0000.0000.0000.0000.0000.000Jul0.0000.0000.0000.0000.0000.000
Aug0.0000.0000.0000.0000.0000.000Sep0.0000.0000.0000.0000.0000.000
Oct0.0000.0000.0000.0000.0000.000Nov0.0000.0000.0000.0000.0000.000Dec0.0000.0000.0000.0000.0000.000
View 1 Replies
View Related
Sep 5, 2009
I am to the end of my wits - or maybe it's impossible to do the following with formulas?
I have the data like this:
Column A: Date (which is basically the date for the beginning of weeks)
Column B: Month of the date in Column A
Column C: Year of the data in Column A
Column D: Weekly data.
A: DateB: MonthC: YearD: Weekly data
12/11/200612200619
12/18/200612200644
12/25/200612200650
1/1/20071200741
1/8/20071200737
1/15/20071200741
1/22/20071200741
1/29/20071200741
2/5/20072200732
2/12/20072200736
2/19/20072200740
2/26/20072200735
Maybe it's because it's Friday night, but I just can't invent how to do the following:
Create a new column E that would contain the monthly sum of ColumnD across all weeks of this month - but entered only against the first week of that month (that is currently in Column A)
I.e., in my example it should be:
113
empty
empty
201
empty
empty
empty
empty..................
View 9 Replies
View Related
Jan 24, 2013
I am trying to build a Project Labour tracking sheet and would like to create a consolidated (monthly) view of labour spent over the life of the project. I have created attached sample sheet to explain it more clearly. Is it possible to have month by month view of individual teams for actual and forecast tracking in Proj Summary tab?
View 3 Replies
View Related
Apr 20, 2013
I'll use following as an example.
I work for a supermarket, I receive many fruits per day and I want to see what percentage of them are bananas, apples, oranges, watermelons etc.
Are there any templates of pie charts and bar graphs that I can use for this that will show the percentage of said fruits daily, weekly and monthly?
View 3 Replies
View Related
Mar 13, 2012
I have the following setup:
52 weeks of 2010 cost with the following structure:
week number | wk1 | wk2 | wk3
week ending | 1/10/2010 | 1/17/2010 | 1/24/2010
weekly cost | 57,000 | 35,000 | 42,000
I want to be able to use the above data to present a summary, but instead of weekly, list the data on a monthly basis:
month | Jan | Feb | Mar
monthly cost | wk1-4 | wk5-8 | wk9-12+3days wk13
Any way to set this up automatically instead of having to split the weekly data as many months share the same weeks?
View 2 Replies
View Related
Nov 14, 2013
I have an excel 2007 script that downloads daily stock data and prices. I do analysis and graph the data.
I would like to keep the download the same, but modify my analysis so as to obtain weekly and/or monthly data.
I am sure this is commonly done, and is not rocket science, but so far I am baffled as to the procedure / algorithm to do this.
View 1 Replies
View Related
Aug 27, 2013
I can't seem to figure out to easily aggregate & automate a series of weekly values (ie. forecast volumes by a specific part number) into vertical monthly summaries, by product.
Here's the before picture:
column A column B column C column D column E column F
Part num 1/1/2013 1/8/2013 1/15/2013 1/22/2013 1/29/2013A
100 100 100 100 100B
150 150 150 150 150C
200 200 200 200 200D
250 250 250 250 250
The output after manually doing this would look like this:
column A column B column CPart num Date QuantityA
Jan-2013 500B Jan-2013 750C Jan-2013 1000D Jan-2013 1250
View 5 Replies
View Related
Mar 3, 2014
We have a weekly "On-Time" report that shows early, late, on time, or no data. Each week has a total percentage of early, late, on time, or no data deliveries. I now need a monthly total on a seperate worksheet, but for some reason I can not get the percentages to total correctly. I am attaching the spreadsheet.
View 3 Replies
View Related
May 8, 2014
I have 12 observations per variable over 2013. At the end of each month I gathered the average value of X of said month. What I want to do is convert these observations to a list of weekly observations, where each week in January gets the value of the January observation
Example:
Month123456789101112
Value 2345678910111213
And get it like:
Week Value
1 2
2 2
3 2
4 2
5 2
6 3
7 3
and so on.
Since I've got a lot of variables I'd like to use some kind of formula.
View 11 Replies
View Related
Jul 2, 2008
How do you create a macro to copy the information from my weekly reports to a monthly report and be able to update automatically. If you had 4 worksheets (for each week of the month) and 1 mastersheet for the whole month in a workbook. All titles are the same and If you needed to copy all the data that is in the columns, say, A through I, starting with row 4 to however many rows are in a given week. The reports can be made up of numicerial values, text and dates. Let me know if more information is needed or an example worksheet.
View 4 Replies
View Related
Jun 26, 2014
I maintain two tables for forecasting hours. One is by week and the other is by month. I'd like to 'automate' the monthly roll up, by summing the weekly totals that fall within a particular month, but not sure how to do this.
This is the weekly table that has a column per week where i update actual hours worked.
weekly.png
This is the monthly table that has a column per month. I'd like to sum up the hours for a month here, and not have to hand count and enter for a given month.
Monthly.png
File attached for reference.
330014857 DSNY Budet Detail.xlsx
View 3 Replies
View Related
Oct 14, 2009
I need to copy the values of a range on the weekly sales worksheet to the monthly sales worksheet. The last column is the total on the weekly sales. Part of the heading of the total column is the week ending date (e.g. 10/17/2009. On the Monthly Sales I have the months in columns by week ending (e.g. 10/17/2009).
Range I4:I28 to the monthly sales worksheet by date.
View 10 Replies
View Related
Jun 1, 2009
I have a table of data which represents data in different categories by week.
My ultimate goal is to have another table representing the data for each month - for instance - for each of the categories the data for :
06/04/2009
13/04/2009
20/04/2009
27/04/2009
is summed to make the data for the month of April.
The way I'm doing this at the moment is very long-winded
I'm using a whole new table - the size of the original weekly one - for each month. A calculation decides whether to effectively leave a cell blank or insert the appropriate data based on a date being within a particular range.
So in each "month table" there is the same list of week values:
06/04/2009
13/04/2009
20/04/2009
27/04/2009
04/05/2009
11/05/2009
etc.
but for each "month table" only the cells adjacent to the dates within the relevant month will return actual numerical values within them
This is an example of the forumula I am using in these tables:
=IF(AND(($AD7>=MIN($AE$5,$AE$6)),$AD7<=MAX($AE$5,$AE$6)),$C7,"NA()")
Then a master table sums the totals for each month.
I want to be able to keep this table but get rid of the ones for every month as the sheet is getting unwieldy!
I have tried several times to attach the sheet for clarity but each time upon trying to "Submit New Thread " I am getting page not found errors - the sheet is only 133KB and I have tried zipping and sending also - I can't make it any smaller.
View 14 Replies
View Related
Jun 19, 2007
In the attached workbook, the CASTINGS worksheet has a SOH ( stock on hand) column.
It looks up the SOH from the SOH worksheet (column 3) for each product on order for that week.
But how do I make week 2 use the SOH figure minus the previous weeks order, IF there was an order?
And so on until week 52.
The problem I have found is what if that product wasnt ordered for the last 4 weeks? Maybe I need a temp worksheet with all the products listed for all the weeks and a running total of SOH weather it is ordered or not?
View 5 Replies
View Related
Jan 27, 2014
Basically i have month end data ranging from 31/01/2000-31/01/2009 with a value attached to each. I need to convert this data into a daily series with the month end value being the same throughout the whole month. I've been playing around with excel for a couple hours tonight
View 9 Replies
View Related
Mar 6, 2013
I have a table of yearly totals for the amount spent by x. I also have a growth rate for each month so for example in 2001 in jan the growth rate might have been 0.3% and feb 0.5% What I want to do is for each month based on the growth rate and the total produce a value for each month which sum to the total amount. It's also important to note that it restarts each year.
Link for excel file is here: [URL] ...........
View 1 Replies
View Related
Aug 3, 2009
I’m currently pulling data into two columns labeled “Monthly” & “Non-Monthly” respectively. They indicate work orders with a frequency of “Monthly” or “Non-Monthly”
The Monthly data is obtained using the following formula:....
View 9 Replies
View Related
