Copy A Formula And Paste Into Adjoining Cells
Oct 27, 2008
We have many spreadsheets in my lab. We have been using them for YEARS. Two days ago we ran into a bizarre problem. If we copy a formula and paste into adjoining cells we get the following
Init Values Formula copied & Pasted Results in B column
A column B Column
10 =A1* 10 100
15 =A2*10 100
20 =A3*10 100
If you copy Range("B1") and Paste it to Range("B2:B3") you get 100, 100, 100 NOT 100, 150, 200. If you click on range("B2") it says =A2*10 but the value 150 does not appear in the cell. If you manually type a formula into each line, the results are what one would expect. If I open a new workbook, copying and pasting works as always.
View 3 Replies
ADVERTISEMENT
Nov 20, 2012
Wanted to know if there is a macro that can copy the selection of cells and paste it as a formula with original cell refernce.
For Example :
Copy Selection Cells - Say Cells A1 B1 & C1
and Paste It as formula In Cell D1 as =A1+B1+C1
View 7 Replies
View Related
Sep 18, 2009
I would like to compare each cell in a spreadsheet to the cell on its right.
If the numeric value of a cell is less than the numeric value of cell on its right, I would like to highlight the cell on the right light red.
Maybe a better way of putting that is if the value of a cell is greater than the cell on its left, highlight it light red (The problem I foresee with this formulation is in the first row where there are no cells to the left).
View 8 Replies
View Related
Apr 21, 2009
I have a list of items in column A of Sheet1 and the same list in column A of Sheet2. Both list will contain the same items, however not necessarily in the same order.
What I want the book to do is; when I click on an item in the list on Sheet1, it takes me to the same item in Sheet2.
Is this possible with VBA?
View 10 Replies
View Related
Feb 3, 2012
This macro works fine on my machine but not with other users:
This should copy/paste certain cells then paste 3 sheets into a new work book.
ON other computers it seems to paste in a picture? works OK for me?
Sub ValidationTests()
'
' ValidationTests Macro
' Macro recorded 21/12/2011 by '
'
Sheets("Score Sheet").Select
Range("A8:M18").Select
Range("H18").Activate
Selection.Copy
[Code] ..........
View 1 Replies
View Related
Feb 4, 2014
How would you prevent the copy/paste of cells that have comments?
Also, how would you allow cells with comments to be copied and pasted without pasting the comments?
I also have an aside question about the forum advanced search. When searching for multiple search words, how would you type the search to include all words, for example, "prevent" & "paste" & "comments".
View 7 Replies
View Related
Jul 16, 2007
I would like to copy a formula in a cell and then paste only the text of the formula, but I can't figure it out. Basically, I would like to avoid going into the cells and absolute referencing or hitting F2, then copying the text.
When I hit "Ctrl C" to copy the cell, then hit "Alt/E/S/F/Enter" to paste the formula, it is just like a regular copy/paste formula-wise in that the references move.
View 10 Replies
View Related
Jun 24, 2008
I am currently working on a data analysis project (data mining) and need to collect and later analyze statistics for the inputs which control a series of calculations. These statistics are shown in the Statistics 1, Statistics 2 and Statistics 3 cells in the workbook that I attached. The inputs are X,Y; all possible values for these inputs are listed in the N,O columns. Basically I need a macro which would take the values from these two columns and place them pair after pair into the controlling cells (K3, L3), then it would copy cells H2 through L3 (updated stats) to a new sheet after each copy operation - so that I will finally have a list of statistics for all of the input pairs.
View 3 Replies
View Related
Apr 12, 2014
I am using code to filter my 4 sheets Greater then 0 (zero)
After apply above filter now i need to copy multiple rows and paste on another specific workbook for paste i m using below code:
for 1st sheet with the name ("V2")
for 2nd sheet with the name("LV")
For 3rd sheet with the name ("F2")
and 4th sheet with the name("L2")
If I play above code one by one all is going very well,,,,,,or if use in this way all is going very well
But here is a big problem..........if any sheet have no value greater then 0(zero)....then code paste all data... e.g shssts("LV") .Range("C5:C54").Copy but C5:C54 have no data greater then 0(zero) and it will paste on another sheet c5:c54 and again new sheets data will paste below the c54 while c5:c54 have no data.
So I want if any sheet have no data with range is greater then 0(Zero) then skip the copy paste code or use like SpecialCells(xlCellTypeVisible) .
View 5 Replies
View Related
Jan 19, 2012
I have data in some of the cells within range A26:A39
These cells are populated via an IF function on another worksheet. Even though the cells appear blank (as in the value returned is ""), there is a formula in these cells. I think it's called formula blank?
I am looking for a way to copy the data from the cells within the range which are not blank (ie: not = "") and paste this data elsewhere on the sheet in a list with no blank spaces in between.
I anticipate that there will be 4 non blank cells within this range.
Ideally I would have data from the nonblank cells copied and pasted to cells
A40
A41
A42
A43
View 5 Replies
View Related
Sep 4, 2008
I have a supply worksheet that is set up where the new data is added into a new column, so that the report extends horizontally. All of the pricing is in Column I, quantities are listed in the new column, and then totals at the bottom with the following formula:
=(SUM(AF7:AF10)*I7)+(AF12*I12)+(AF13*I13)+(SUM(AF15:AF18)*I15)+(SUM(AF20:AF23)*I20)
When I copy and paste the cell, into the next column for a new order, it changes the quantity column from "AF" to "AG", which I want it to do, but it also changes the pricing column from "I" to "J". I then have to go in manually and change all the J's to I's. When I copy the just the formula, it keeps everything the same, and then I have to manually change "AF" to "AG".
Is there a way to copy and paste so that the pricing column stays fixed within the formula, but the quantity column changes?
View 2 Replies
View Related
Mar 13, 2007
I need to copy a formula that is entered into a cell via a macro and copy it down to the bottom of my data. Now the ROWS never change but the Columns change every week as new data is needed to be entered. The code I am using to enter the formula is:
Dim MyLastColumnWip As Interger
Cells(3, MyLastColumnWip).select
ActiveCell.FormulaR1C1 = "= SUM(RC10-RC[-5]"
This works fine for that specfic cell but i now need to copy it down. An example of my spreadsheet is:..............
View 3 Replies
View Related
Aug 11, 2007
how to make my macro copy ONLY the Value it finds in a cell, and then paste ONLY the value into another cell on another sheet, while retaining the DESTINATION cells's formatting, font, size etc... I know how to do all of that except get it to copy and paste ONLY the values and not the cell size, formatting etc...
View 4 Replies
View Related
Jan 21, 2014
way to copy and paste a formula into every other blank row?
The formula will be staying in the same columns the whole way down the sheet. Eg: A1, A2, A3 ..... ETC
View 1 Replies
View Related
May 11, 2009
I m finding the last used column and pasting a formula in the same row to the last column. Here is what I have used and it isn't working.:
View 5 Replies
View Related
Nov 1, 2012
I have a spreadsheet that calculates a rolling percentage of a row of numbers. The formulas are contained in two columns, J and K. The first row is a header row, and the formulas repeat every 52 rows (e.g. J2:K53, copy paste those cells, re-paste at J54, then J106, and so on. Because I don't know how to loop, I've had to manually right in the paste every 52 rows in my line of code. Surely there is a way to have this cut down and to actually stop when there are no more rows of data. For the record, this continues on manually until 80,000 because I don't know how to stop it at the last row.
Code:
Sub CopyPasta()
'
' Copy_Paste_52 Macro
'
'
Range("J2:K53").Select
Range("K53").Activate
Selection.Copy
Range("J54").Select
[code]....
View 5 Replies
View Related
Nov 19, 2013
I would like a formula or macro that would recognize an answer to a question and populate a group of headings in another sheet.My thought is it would be copy and paste related.
Specifically, =If(sheet1A1=2013, then show January 2013, February 2013, March 2013 etc in Sheet 2A1-A120.
I would have all these months written out somewhere else to be copy and pasted.
View 3 Replies
View Related
Nov 29, 2007
If I have a cell lets say A1 with a formula in it say "=A2" how do I copy A1 into A3 so that A3 will contain the text =A2 (and not the formula)?
View 9 Replies
View Related
Mar 30, 2008
i pull the formula of o21 to o22
o21 has formula =IF(J21>=U21,1,"")
022 has formula =IF(J22>=U22,1,"")
and basically u21 and u22 are "=s20"
so may i know what formula i should use to simplify o21 and o22 so that i do not need to use u21 and u22
i cant use =IF(J21>=U$21,1,"") because if i copy this formula and paste to other cell, it will always refer to U$21...
View 9 Replies
View Related
Dec 19, 2012
I have 2 worksheets, one of them (Sheet 2) has a varying number of rows.
I would like to copy the last 13 rows of sheet 2 and paste them in the last 13 rows of sheet 1
View 2 Replies
View Related
Jan 17, 2007
I have managed to write a program to calculate golf handicaps. However, there is one aspect of the program I would like to improve and request your assistance once more. I have attached a diluted sample. It is very tedious to extract info from the Scores worksheet to the Posting worksheet in that I only know to copy and paste from the appropriate cells. The Posting worksheet will actually have 5 rows per player (as it will list a maximum 20 scores by date in descending order) and needs to be in alphabetical order.
View 2 Replies
View Related
Jun 10, 2009
I have to enter info daily in column H. What I wanted to do is as I finish entering info in cell H3, infomation in row 2(cell A2:E2) is copied and pasted down to row 3 (A3:E3) and will continue about 100 rows down daily.
View 4 Replies
View Related
Nov 23, 2012
I have a sheet that is set up with columns A thru G. In column A is a name and the columns B thru G is just data. How do I cut text thru vba and then paste it to another location.
View 9 Replies
View Related
Apr 16, 2008
The objective is to copy the value from one cell if another cell in the same row is blank onto another sheet (in another excel file if possible). This would have to be done for all value in the sheet.
View 7 Replies
View Related
Apr 8, 2014
I am trying linking it and this what I am trying to do , need a formula for it.
E.g.
Sheet 1 cell J3= Sheet 2 cell K3
Sheet 1 cell J4= Sheet 2 cell K9
Sheet 1 cell J5= Sheet 2 cell K15
and so on.
View 3 Replies
View Related
Jun 13, 2014
I am attempting to copy the results of a formula in a column to a row. The data in the column is in a different worksheet. Although pasting the data using the transpose option in the drop down menu works, I really want to have the results of the formula returned. The reason for this is the results are variable based on the formula.
View 9 Replies
View Related
Sep 24, 2009
I have a drop down list. When I choose something from the list, it creates a description (text) in the next cell. I need to be able to copy/paste the text from the cell, but it will only let me choose the formula instead.
View 4 Replies
View Related
Feb 19, 2009
From time to time the data on worksheet x changes and it is picked up by worksheet y and I need to copy and paste the new information to sheet z. I've been fiddling with the code to get it to paste the values and pick up the new values, but it won't.
I need to adjust the code to copy to the last column, and the last row, and copy just the values. Ifm unable to do t his.
I've attached the sheet so you'll see that the data will only copy once.
Go to worksheet z and press the command button.
I got the code from this site: ...
View 6 Replies
View Related
Apr 15, 2009
I am looking for better way to copy formula and paste it to dynamic table (I dont know how many rows there is at the table). The procedure takes long time for the user. (the table may contain more than 30,000 rows !!).
View 3 Replies
View Related
Jun 17, 2014
I have a vlookup which checks another sheet and imports data. The formula is as such:
=IF(ISNA(VLOOKUP(B17,Data!A$1:$C$40,3,FALSE)),"",T(VLOOKUP(B17,Data!A$1:$C$40,3,FALSE))) .
The problem I have is when I paste and amend data on sheet Data! it changes the formula to
=IF(ISNA(VLOOKUP(B17,Data!A$1:$B$40,3,FALSE)),"",T(VLOOKUP(B17,Data!A$1:$B$40,3,FALSE))) .
How do I prevent it from doing this?
View 4 Replies
View Related
