I use web query to get some range of data. This data is refresing and changing on some time (i set query refresh on 1 minute). So, i'd like to fetch this data and make the table with all data (new data on eg. every 1 minute). How to do this?
I use Excel 2003.
A web query I am trying to use to bring an online data table into my worksheet is broken. Now, instead of returning the data table nicely into my worksheet, it imports the code of the webpage, instead, and turns my worksheet into a mess.
The query used to work but there was recently an "upgrade" to the program that populates the web table and the query no longer works and just returns the code for the page, instead. I can see the html code for the table in all of the code it returns but I really need the table to import cleanly into excel.
I can't talk to the people who changed the web program.
An external data web query points to a web site that offers a foreign exchange rate calculator. In my browser, I selected the specific currency pair I need and used the resulting url in the web query. The "New Web Query" pane resolves the url correctly and allows me to select the table data I want (the little yellow arrow turns to a green check mark). However, when I hit "Import" and select the target cell, the only data returned is the parameters from the url and an error msg (This web query returned no data...). How do I get the query to pass the parameters to the website correctly?
View 3 Replies View Relatedattached is a spreadsheet 6 people in my area use daily(ive copied and pasted the sheet in question to a new worksheet, as the file was too big). Ive been trying for about 3 days now to make a pivot table to summarise this data.
View 6 Replies View RelatedIn pivot table field Setting > Advanced > page field option, the selection for "the query and external data source is disabled. How do i enable it.
View 9 Replies View RelatedI have an Excel spreadsheet with a query to an Access table. The query pulls data from 2 columns in a table and pastes it to the spreadsheet. I am trying to update the VBA a little on one sheet and now I get the attached error whenever the code tries to run in Excel. Here is the code with the offending portion separated at the top.
View 2 Replies View RelatedI have a csv file on another drive on the network that i need to query. I believe that ms query would be the best way. I know that a DSN needs to be setup but this macro will be used by various users who wont know how to do that. thus I would like to create one via VBA every time the task needs to be run.
I haven't a clue how to do this and i need it to be explained to me in general terms with words of one syllable!
How do I do a query from Excel table? I know that from sheet it works like SELECT * FROM [SheetName$], but how about a table?
View 9 Replies View RelatedI'm trying to update a query table in excel, but it keeps giving me the error 1004
Worksheets("Data-All").Range("A4").QueryTable.Refresh BackgroundQuery:=False
Cell a4 is in my query table.
Our company's accounting system is physically split into 2 company databases, CompanyA and CompanyB. I'm trying to write a query which will pull the customer number and the accounts receivable balances from both companies into a single Excel table, for any customer with a total balance 0.
I have created the following query, which doesn't generate any errors, but is only successfully importing the data from the first company.
The CompanyA DSN is specified in the query ...
the attachment is a sample spreadsheet of what i am trying to do. I would like to create a pivot table so that for each site I can list all of the organic suites individually. Then show a count of only 1 for each site, even when there are several counts for each site. And then for this to be related to a cost of each of the suites so that I can get a total cost for each site.
eg:
site name
organic suites suite cost
o1 x
o2 y
o3 z
Total A
etc
I am having a excel vba code that copies tab from different excel file and then i want to use in sql query. It is always giving me error saying that "The Microsoft Access database engine could not find the object 'rahul'. Make sure the object exists and that you spell its name and the path name correctly. If 'rahul' is not a local object, check your network connection or contact the server administrator."
Though, when i rerun the macro after reopening the excel file, it is working fine. Seems like tabs dynamically created cant be used. Is their any way to get it done at runtime? I want to delete new created tab once data from new tab is inserted to required tab.
my macro calls first copyAllSheets(filename) and then writeSheet().
Code:
Private Function copyAllSheets(ByVal fname)
Dim destSheetCount As Integer
Const FUNCNAME = "copyAllSheets"
On Error GoTo ErrorHandler
Set wb = Workbooks.Open(fname)
destSheetCount = ThisWorkbook.Worksheets.Count + 1
wb.Worksheets("Buyer").Copy after:=ThisWorkbook.Sheets(1)
ThisWorkbook.Worksheets(destSheetCount).Name = "impBuyer"
[code]........
This is part of code so probably it wont be easy to understand the flow. but mainly i want to know how can i have newly created tab as table_name.
I've used this code prior and it worked fine in Excel 2007, now I'm having issues with it. Originally every Pivottable & Query pointed to a different CSV file. Now I have two pivottables built off a Excel worksheet that is built from a Query. This allows me to do some complex lookups that I couldn't do with just the Pivottable and MS Query alone.
Here's the code that's failing out: Any problems with it in Excel 2007?
Private Sub Update_All_Data_Click()
Dim pvt As PivotTable
Dim ws As Worksheet
Dim qt As QueryTable
mytitle = "This will refresh all data for validation, are you sure?"
Msg = "The Refresh process takes about 5 minutes, are you sure you want to continue?"
Response = MsgBox(Msg, vbExclamation + vbYesNo, mytitle)
Select Case Response
Case Is = vbYes
' Do Nothing, continue with program
Case Is = vbNo
Worksheets("instructions").Range("a1").Select
End
End Select
For Each ws In ThisWorkbook.Worksheets
For Each qt In ws.QueryTables
qt.BackgroundQuery = True
qt.Refresh
Next qt
Next ws
For Each ws In ActiveWorkbook.Worksheets
For Each pvt In ws.PivotTables
pvt.RefreshTable
Next pvt
Next ws
mytitle = "Confirmation of data refresh"
Msg = "The data has been refreshed"
Response = MsgBox(Msg, vbExclamation, mytitle)
End Sub
I'm trying to get the data from this site
http://www.cmegroup.com/clearport/pr...=1&PageStart=1
When going through the Web Query in Excel and pulling data with the above address. I get the option to pull the data from the products table..the table with the code/name/product group/sub group..etc etc...
But when I launch the query, it doesn't pull the table data..I get everything but the product list.
I run a web query to populate a table in my spreadsheet. The data is dynamic - and on some days, I will get a couple of extra rows in the table (its weather data, so e.g. when its raining, they will forecast an extra row of how many mm, etc...)
To give a simple example, right now I use Hlookup to locate the value of F3 (the date) in my dynamic range of B26:G26 and step down 3 rows, where my needed temperature values are for that corresponding day. This works great like this already: =HLOOKUP(F3,B26:G29,3,FALSE)
The big issue is...what happens if my target values are not always 3 rows down? If the query refreshes with any extra rows, this reference is shifted. (Well, my starting "Anchor" is shifted)
I have to import data into Excel from Access (yes, I have to import it to Excel and cannot use Access exclusively). When I import; however, the formatting does not come over correctly, most especially losing the formatting of numbers. I need one of two solutions:
1.) How to get the formatting to move over correctly?
2.) Or how I can save the formatting of a table, then be able to apply it as a "saved" format? The biggest thing is that the numbers will changed the number of decimal places and/or change from general numbers when I want to see them as currency.
The top table shows how i want this formatted, the bottom shows how it is importing.
I have an SQL Server that has a query (a view stored on the server) which takes roughly 10-20 seconds to execute. This execution time is the same in Excel 2007 if I import data to worksheet/pivottable. It is also the same in Excel 2003 while importing data into a worksheet. It returns about 350 rows.
However, if I try to make a pivot table in 2003 based on this query, it is much slower. I can set it up fine, but refreshing this pivot table takes at least 10-20x as long to complete, in the order of 5-20 minutes, to sometimes taking so long that I give up and kill it by hitting escape a bunch.
It's important to note that I am forced to used Microsoft Query to set up a pivot table in Excel 2003. There is no other way, I believe.
While it is running, Excel just sits there saying "Waiting for data to be returned from Microsoft Query".
Here is the weirdest part. Once the refresh starts, Microsoft Query loads in the background, you can see it on the taskbar. I believe that is expected behavior, but if I click on MS Query and view its datatable, I can see all the data is sitting there.
So what is the hold up? MS Query has the data. Excel is waiting for it to be returned. What is going on? And remember from above, if I do a simple import data to worksheet, MS Query is not used and everything is fast.
So my question is does anybody have any tips/advice on this issue? I need a way to not use MS Query for a pivottable's data source or I need a way to make MS Query not freeze up. I don't get why MS Query needs to be involved in the first place since I am not doing any parameters or so forth.
I created a union query in Access to join two tables (Projections and Actual Sales). The query produces the results I want. I need to create a pivot table in Excel using the union query as the source. When I pull up the data import function in Excel, the union query does not appear. Do I need to do something else? I have tried to create a select query where I select all from the union query and I can find that fine.
When I use this query to create the pivot table the results end up all zeros when I try to sum the values. It creates some crazy results when I show it as count of also.
I can provide the data in either the Access database or Excel spreadsheet.
I have created a pivot table in Excel 2010 that lists amounts used of particular items each month. Inside the pivot table value field settings i have changed the show values as field so that it displays the difference in usage from this month to last.
However if i now select a top 10 filter it only filters by the total number used as opposed to the difference in usage from one month to the next (which is the values displayed).
Is there a way that i can filter by top 10 by the actual values displayed in the pivot chart and not just the underlying data that creates it?
I need the VBA script in excel that will do a SQL Query, for this case I need to select a value where there are 2-3 tags and between certain period then display the result as a table in a worksheet.
Example I have a database with 3 types of tags "Tag A", "Tag B", and "Tag C", and each tag have a value with different timestamp. the database looks like this:
No. Timestamp Tags Value
1 1-Jan-2010 Tag A 18
2 1-Jan-2010 Tag C 20
3 2-Jan-2010 Tag A 20
4 3-Jan-2010 Tag B 17
5 3-Jan-2010 Tag C 19
6 4-Jan-2010 Tag B 18
7 4-Jan-2010 Tag A 20
8 5-Jan-2010 Tag A 22
9 5-Jan-2010 Tag B 18
10 5-JAn-2010 Tag C 20
I've used the code below and it's worked to stop Update Links message, but i still need one tip to avoid continue message that shows up after Update Links massage:
Private Sub Workbook_Open()
Application.AskToUpdateLinks = False
Sheets("Feb").Activate
Range("A200:I400").Select
Selection.QueryTable.Refresh BackgroundQuery:=True
End Sub
I need to extract/copy (to another sheet) data of all 4 columns in a row for each first entry and last exit (for each person) from the attached file.
View 10 Replies View RelatedI have all games saved, each game into it's own sheet (tab), in a workbook. Game 1 is on Sheet1, game 2 is on Sheet2 etc etc
I also have a "Calculations" sheet that I wish to import each game into 1 at a time, and run a macro on it to run a stat tracker.
Is it possible to create a table, that I can type the sheet name "Sheet1" into a cell, it will have that table populate with all the info contained in "Sheet1"?
Here is an example of my spreadsheet
I have two spread sheets that I 'converted' into tables. I need to combine them into a single sheet. When I attempt to copy and paste from one to the other the formatting and formulas do not carry 'down' as they do when I manually enter a new line or record.
Is there a way to copy multiple rows of data from one tabled sheet to another tabled sheet?
I need to populate data from Access table to sheet1 using Excel/vba. I want to find out the percentage of batches scanned for the date selected for each time slot. There are Time slots in the columns from Q to X. i.e 8:00,9:00,10:00,11:00.....etc.
so I need to find out percentage of batches scanned before the above time slots.. To count total number of batches , we will use count(BatchNo) function in the SQL query. Because of company restrictions, I can't attach the access database but to give u an idea how the database is stored, I copied the data in sheet2 of the attached workbook. We have to find percentage of batches scanned in sheet1.
I have a sheet in which you enter in new information. I need a macro to copy that information onto another sheet, onto the first empty row, so it does not clear the information that has already been entered. The first sheet is an information entry sheet, and the second is the database, which contains all of the information. I hope this is clear, if you do not understand, I will be happy to rephrase my question!
I have included two screenshots of the excel system. They are named.
I have on sheet 1 a table 12 columns, variable rows. I filter this table on two different columns, so that only x rows are visible.
My aim is to move these visible rows to another sheet 2, starting from cell J23., work with these data in other cells of sheet 2, and send them back to sheet 1, adding the date in column 12.
Do I need, sheet viewcode or module ?
Afterwords I would like to link this VBA code to a form button.
I have a sheet with products down the side, and dates across the top. Numbers will be entered at an intersection between dates and products to represent quantity. Whenever there is a non-blank value for the quantity, I need to copy the products, dates, and quantity into a traditional database format. I have attached the original data format I get from suppliers on when they will deliver, and then show a separate tab for "Desired Result"
View 2 Replies View RelatedI've tried my best to describe my dilema. I import data in an SQL query from a mainframe. This data shows a job number, site address, job number and a length. Multiple lengths on the same site appear as separate entries. I use a pivot table to calculate a total length and also formulas to determine whether a site is in an East or West area. I then need to then be able to copy the 'East' jobs to an 'East' worksheet and the 'West' jobs to the 'West' worksheet. But, I only want a site to appear once with the total length.
View 2 Replies View RelatedI have a chart and a data table (please see attached file named "delete_1.xls).
I need to present these 2 items in a single slide of PowerPoint.
I have done like this.
-First copied the chart from Excel.
-Then pasted it in PowerPoint using "Paste special".
-Then clicked "picture (windows metafile)" this is to reduce memory consumption
Then repeated the above steps for the excel table too.
The PowerPoint slide that I got cannot be attached as system doesn't allow me.
Question: I wanted to a give a paper copy of the PowerPoint slide to my Director who needs a PowerPoint slide and not an Excel chart. But in the slide, the numbers of the table look much juggled and as if the numbers are too closely typed.
I tried with various different fonts in Excel and then copy and pasted in PowerPoint but the problem persists.
What things I should do in Excel table so that cell values are clear in the Table presented in PowerPoint ?
Attached File : Delete_1.xls