Excel 2010 :: Copy Data From One Table To Another

Jun 9, 2013

I have two spread sheets that I 'converted' into tables. I need to combine them into a single sheet. When I attempt to copy and paste from one to the other the formatting and formulas do not carry 'down' as they do when I manually enter a new line or record.

Is there a way to copy multiple rows of data from one tabled sheet to another tabled sheet?

View 12 Replies


ADVERTISEMENT

Excel 2010 :: How To Auto Update PowerPoint Table When New Data Entered Into Table

Jun 12, 2013

I have created a table in Excel 2010 (pls see attached table named post.xlsx).

Then copied the above table into PowerPoint 2010, using "paste link" (I tried to attach the PowerPoint file but the system says "invalid file type" and I cannot attach it).

Question:

I have received income data for another month - the new month is 13 and the corresponding new income is 100.
I typed 13 and 100 into the Excel table post.xlsx and thus extended the table by another column.

Then I went back to PowerPoint slide, then right clicked on the table there, then clicked "update link".

Specific Question:

The newly-typed column in Excel table is not get updated in PowerPoint table.

View 2 Replies View Related

Excel 2010 :: Pivot Table Copy And Paste Values AND Formatting

Jun 13, 2014

In excel 2010, I'm using the following to copy and paste values and formatting from a pivot table, but i lose the formatting (TableStyle2 = "PivotStyleLight8"):

VB:
Selection.CurrentRegion.Select
Selection.Copy
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False

I have tried to add, xlPasteFormats, but to no avail...?

View 4 Replies View Related

Excel 2010 :: Copy Table (listobject) INCLUDING Hidden / Filtered Rows

Nov 11, 2012

I'm trying to copy a whole bunch of tables with identical layout to a master table, so I can create a whole bunch of pivot tables that include data from ALL the various tables. The source tables MAY be filtered, and I can't work out how to copy them easily while also INCLUDING any hidden/filtered rows while at the same time leaving any filter settings on the source tables intact.

If I use something like range("Table1").Listobject.DataBodyRange.Copy then it only copies the VISIBLE rows.

But I want ALL rows to be copied to a master table.

1. I don't want to unfilter the sources tables, because users might still want the source tables to remain exactly as the user filtered them. (However, it doesn't matter if the DESTINATION list is filtered or not). I realise that I could copy the entire sheet to a temp sheet, then unfilter any tables on that sheet and THEN copy these to the master list. But wan't to know if there's a simpler way.

2. I DON'T want to use SQL to create a pivot table directly from the tables, because the tables will have further information added to them from time to time, and so if I use SQL to make a pivot directly from them, I'll have to recreate the pivot cache using that SQL query each time, which might muck up the settings in any existing pivot tables. I realise that I could use SQL to copy the data to a 'staging area', and just point the pivot table at that.

3. I can't use PowerPivot, because its not installed in this environment.

View 1 Replies View Related

Excel 2010 :: Randomize Data In Table On F9 Only

Jan 10, 2013

I have an Excel table with 7 columns. I have used a formula to randomize the data in each column, and it works fine, accept that it resorts/re-randomizes the contents of the table every time data is entered anywhere in the workbook. I would like the data to be sorted/randomized only once, and then only again upon pressing F9, since I have other spreadsheet which reference the data in the table.

This is the formula I use to sort/randomize the data, and I am using Excel 2010 on a PC.

=VLOOKUP(SMALL($C$2:$C$20,B2),($C$2:D20),2,FALSE)

Column B = numbered 1 - 20
Column C = =RAND()
Column D = last of names
Column E = sorted/randomized list of names.

View 4 Replies View Related

Excel 2010 :: Add Another Data Into Pivot Table Chart?

Jul 30, 2012

Can Pivot Table chart add another data from another sheet? I attached the link for this file (Add data1), it is because the file consists of several sheets and I do not know how to show here.

I would like to add the data from the "Rate" sheet into the Pivot Table chart (Chart.PT). I made an example by using normal way (Chart.Case (9)), the column series in the chart is the one I added from the "Rate" sheet. I wonder if I could do the same in pivot table chart.

View 9 Replies View Related

Excel 2010 :: Pivot Table Reference Is Not Valid When Moving Data And Pivot Table Together?

Mar 19, 2013

On a worksheet, I created:

- a list of data
- a pivottable based on these data

When moving this worksheet this worksheet to another workbook, the pivot table can't refresh anymore. This throws an error message "Reference is not valid". To work around this problem I need to adapt the datasource. The same occurs if the list and the pivot table are on separate sheet, with the added strange behaviour that, when data an PT are split, it is not possible to move both sheet together.

This would not be a big issue if my problem had to be solved manually. The real problem is that I need to move the sheets from a C# program.

View 3 Replies View Related

Excel 2010 :: How To View Source Data Of Pivot Table

Jan 6, 2012

I'm used to work with the Excel 2003 edition, however I just changed the version to 2010. As result of that I do have the following question:

How can you view the source data of a pivot table in Excel 2010?

View 6 Replies View Related

Excel 2010 :: Copy Down Data To Next Row

Jun 16, 2014

I have an annoying task which seems like could be performed via a macro, here is a brief explanation:

I have a table in this format:

Name
Colour 1
Colour 2
Colour 3
Colour 4
Colour 5

[Code]...

However, I need the data in the following format:

Name
Colour
Annie
Red

[Code]....

Would there be an easy way of doing this through a macro?

View 3 Replies View Related

Excel 2010 :: Keeping Manually Entered Table Data Associated With Correct Row?

Jan 14, 2014

I have a table created in Excel 2010 by a SQL query. the query pulls 3 columns of data - Resource Name, Contract Company, Labor Category. I then add a column called "KEY". KEY is derived using VLOOKUP. VLOOKUP is matching the Contract Company from the table created with SQL to a table called "Rate Key" in another worksheet in the spreadsheet based on the matching the Contract Company. That all works fine. If the table changes due to changes in data coming from the SQL db, the column I've added using VLOOKUP recalculates correctly. Then I add 2 more columns. One is called RATE - which is a number that I manually type in. The last column is called RCode and is calculated by the RATE times the KEY. Whenever I refresh the SQL query, all of the the calculated rows work fine; however, the data in the RATE column that I manually enter does not move - it stays with the row regardless of whether or not the name changes when the new SQL data comes over. How do I get the values manually entered in the RATE column to move with the correct row when the rows change?

View 2 Replies View Related

Excel 2010 :: Auto-populating Calendar Based On Conditions From Data Table On Another Sheet?

Apr 26, 2014

I'm trying to auto populate a calender style sheet in Excel 2010 based on data from a Work Schedule sheet. The work schedule sheet contains a list of jobs, with each row representing a different job. There is a column for the start date (e.g. 25/04/14) and a column for the end date (e.g. 26/04/14). There are other columns which select resources such as people and vehicles. Each resource may appear on any one of several columns for each row, e.g. Site Operative 1, Site Operative 2 etc.

On the calendar sheet, in which one cell represents one day (e.g. 25/04/14), all the dates are shown along the top going right and all the resources are shown on the left going down.

On the calender sheet, in every cell I want a formula that will look at the Work Schedule sheet and see if that particular resource is being used on that particular date. If it does, the cell can display information from another cell such as the job number or job name to which the resource is assigned; if it doesn't, the resource isn't being used so it can display "Free" or "Available".

View 2 Replies View Related

Excel 2010 :: Create Pivot Table To Gather Cumulative Amount From Data Sources

Nov 30, 2011

I'm trying to create a pivot in 2010, which gathers a cumulative amount from data sources within two different worksheets.

View 2 Replies View Related

Excel 2010 :: Sales Daily Sales Data To Be Aggregated Into Monthly Data (not Using Pivot Table)

Mar 27, 2013

I cannot solve with Excel 2010 and I have searched all over for the answer.

I have sales data that is approximately daily and would like to count the monthly data and summarize it as an average for the month in a separate column.

For example, I would like to turn this:

3/2/2005 $xxxx
3/5/2005 $xxxx
3/20/2005 $xxxx
4/2/2005 $xxxx
4/10/2005 $xxxx

Into this:
March 2005- $xxxx (monthly average)
April 2005- $xxxx (monthly average)

I have a feeling some 'countif' formula would work but I am not sure how to do this.

View 4 Replies View Related

Excel 2010 :: Create Sheet With Table From Pivot Table?

Apr 26, 2012

Recently, the boss showed me a Pivot table & chart, which consists of a list of about 30 user names in the first column. The row headings were the different items they purchased from a vending machine. & when he clicked on any name in the first column, this created a new sheet, renamed with users name, with a small table of results showing what that person purchased.

Problem is, none of us can figure out how to do this. I have created a new Pivot table & chart exactly like the original, but I cannot get the smaller sheet to generate. (Excel 2010)

View 3 Replies View Related

How To Copy And Paste Excel Chart And Data Table In PowerPoint

Jan 23, 2013

I have a chart and a data table (please see attached file named "delete_1.xls).

I need to present these 2 items in a single slide of PowerPoint.

I have done like this.

-First copied the chart from Excel.
-Then pasted it in PowerPoint using "Paste special".
-Then clicked "picture (windows metafile)" this is to reduce memory consumption

Then repeated the above steps for the excel table too.

The PowerPoint slide that I got cannot be attached as system doesn't allow me.

Question: I wanted to a give a paper copy of the PowerPoint slide to my Director who needs a PowerPoint slide and not an Excel chart. But in the slide, the numbers of the table look much juggled and as if the numbers are too closely typed.

I tried with various different fonts in Excel and then copy and pasted in PowerPoint but the problem persists.

What things I should do in Excel table so that cell values are clear in the Table presented in PowerPoint ?

Attached File : Delete_1.xls‎

View 4 Replies View Related

Excel 2010 :: Macro To Change Excel Formatted Table Name Dependent On Number Of Loops

Jul 9, 2012

Recorded macro. The hope is to insert a excel formatted table a set number of times. I have found a loop code that references a Cell A1 and repeats that amount of times. So if A1= 10. There should be 10 tables inserted. However on the second time there is a fault with the table name. I need the name to change each time the loop is run. ie Table1, Table2, Table3 etc up until the loop stops (A1 contents).

I am using excel for windows 2010. The macro that i have so far is below.

Sub LoopTest()
Dim n
Dim V
Range("A1").Select
V = ActiveCell.Value

[Code] ........

View 1 Replies View Related

Excel 2010 :: Copy Data From One Cell Based On Color Of Another Cell To Different Worksheet

Jan 30, 2014

I have an Excel 2010 spreadsheet consisting of many worksheets (20 or so). Each of these worksheets contain detail level data regarding different projects. One of the columns in these worksheets is the 'Status' column (column F). There is conditional formatting on this column where if the text is 'G' then change background to a green color, 'Y'=yellow, 'R'=Red and 'U'=Grey.

The first worksheet is a summary sheet that I would like to pull information from each of the detail worksheet's columns B, D, E, G and H if the status column (Column F) is 'R' or 'Y'.

The number of rows in the detail worksheet can change each week (as few as 0 and as many as 100)

View 2 Replies View Related

Excel 2010 :: Pivot Table Grouping

Apr 28, 2014

I had a workbook in Excel 2003 that i just moved to 2010. In the 2003 file I had 2 pivot tables, one each on a worksheet, looking at the same data, just grouped differently. One yearly, one quarterly.

Now in the 2010 workbook whenever I change the grouping on pivot table, the other one changes also. It's like they are linked together or something.

View 3 Replies View Related

Excel 2010 :: Find Value In Another Table And Return Value From Same Row?

Dec 14, 2012

Excel 2010. I have two very large tables of data:

Table 1 is a long list of unique items in no particular order, each of which belongs to a unique group of items, for example:

ItemsGroup ID
apple
pear
grape
fig
banana
guava
peach
mango

Table 2 lists all the Group ID numbers and in the same row as each Group ID number, shows the names of all the items belonging to that group, one item in each column. Different Groups have different numbers of items in them. For example:

Group IDItem1 Item2 Item3 etc.
214applepeargrape
33fig
7bananaguava
59peachmango

Is there a formula I can use in the second column of Table 1 to look for each item in Table 2 and tell me what group it is in? For example for "apple" or "pear" or "grape" it would look in Table 2 and return the Group ID number "214".

View 4 Replies View Related

Excel 2010 :: VBA - How To Convert A Range To A Table

Jan 27, 2014

I am relatively new to VBA and am trying to convert a range of data to a table in the same sheet. I receive the following message when I try to run the code as shown below:

"The worksheet for the table data must be the same sheet as the table being created." The code stops on the third line of the code.

Sheets("Data Forwards").Select
ActiveSheet.Range("$A$1:$U$1000").Select
ActiveSheet.ListObjects.Add(xlSrcRange, Range("$A$1:$U$1000"), , xlYes).Name = _
"Table1"
ActiveSheet.Range("Table1[#All]").Select
ActiveSheet.ListObjects("Table1").TableStyle = "TableStyleMedium2"

I can see that the range is highlighted in the sheet before the code breaks.

View 3 Replies View Related

Excel 2010 :: Lookup From Variable Table

Mar 13, 2012

I need to return a value dependent on a few criteria. Type will be selected via a drop down and then it must lookup the same type in the top row and then the value which will be between two values and then return the grade on the far left.

GradeG4M5M6TypeValueGradeA
160016501800M5850CB600700650780900950C7008007809109501100D8009009101040
10001250E90010001040117010501400F100011001170130011001550G>1100>1300>1150

I am using Excel 2010 on Win 7

View 6 Replies View Related

Excel 2010 :: VBA Selecting Only Certain Columns In A Table

Sep 10, 2012

I have a table in columns C:J, starting in row 7. I have a macro that selects and copies the whole table (after I filter the table) and pastes to another sheet. Recently I've realized that I can only copy/paste C:I or it will mess up my formulas during the process.

This is the code I have right now, which works beautifully for the whole table:

Code:
ActiveSheet.ListObjects("Table36").Range.AutoFilter Field:=6, Criteria1:= _
"=Alan", Operator:=xlOr, Criteria2:="="
Range(ActiveSheet.ListObjects(1)).Select
Selection.Copy

What I need is to know how to copy everything in the table except column J. I can't just copy a certain range cells because the number of rows is variable. There has to be a way to modify the ActiveSheet.ListObjects("Table36") right?

Using Excel 2010.

View 2 Replies View Related

Excel 2010 :: Filtering Pivot Table?

Sep 13, 2012

I have a pivot table in 2010- is there a way to filter the data using an external reference from the pivot table? I'd like to put the value in another cell and have the pivot update automatically when I type a new value in that cell.

View 2 Replies View Related

Excel 2010 :: Pivot Table Sorting With VBA?

Apr 10, 2013

Using Excel 2010

I have a workbook with multiple sheets.Sheet1 is named "UPC" and is a giant database for my workbook containing 80,000+ rows and 12 columns.

Sheet2 is named "Scan" and uses a bunch of index-match formulas. Basically, you scan a barcode and it auto-populates across the row all the information it pulls with that particular UPC from the "UPC" sheet. One of my columns, "QTY Scanned", in the "UPC" sheet has a countif formula to keep track of how many times that item was scanned on the "Scan" sheet.

Sheet3 is named "PSlip" and has a big button on it that you press and multiple macros go into overdrive. First macro takes all the rows from "UPC" with a quantity greater than 0 in the "QTY Scanned" column and copies it to the "PSlip" sheet.

Second macro takes that data and makes a pivot table.This is all clothing, pants, shirts, jackets, etc...When my pivot table is created, my Column Label is Size. When the pivot table is created, it automatically sorts it in ascending order, so it goes from numbers to letters.

This is great for pants because the size is in reference to a waist size; 24,25,26,27, etc...

HOWEVER, shirts, jackets, and other tops are not in a numeric size: they are in a Text format. XS, S, M, L, etc...

Sometimes we only scan pants for an order, sometimes only tops, sometimes both.

Is there a way for the pivot table to recognize when tops are in included and automatically sort the sizes?

I still want the numeric values at the beginning, but once the text starts it automatically sorts in this order:

XXS, XS, S, M, L, XL, XXL, MT, LT, XLT, XXLT, 1X, 2X, 3X, 4X, 5X

View 2 Replies View Related

Excel 2010 :: Create Summary Table?

Nov 18, 2013

Code:
Date Jan-14..........Jun-14............Dec-14...........Jan-15..........Jun-15............Dec-15
Measure1
Measure2
Measure3

Code:
Date 2014 2015 2016
Measure1
Measure2
Measure3

I have two tables, examples above In the first table, Jan-14 is a dropdown value that updates all the values to the right by a month increment when a specific date is selected

I then have some code that populates the cells which have 2014,2015,2016 in them.

What I need to do next is populate the 2nd table with values based on the date ranges in the above table.

View 4 Replies View Related

Excel 2010 :: Create Pivot Table VBA

Nov 26, 2013

I'm trying to create a pivot in vba. I can record what I have done but if I run that recorded code, it returns an error "Invalid call procedure or argument".

Code:
ActiveSheet.PivotTableWizard SourceType:=xlDatabase, _
SourceData:=Sheets("Raw Data").Range("A1:AG" & Z), _
TableDestination:=Range("A3"), _

[Code].....

View 1 Replies View Related

Excel 2010 :: Pivot Table Showing Zero Instead Of Value

Mar 8, 2014

My problem is this: I use Excel 2010 and have Pivot Tables that are using a Data Connection which is being built (and rebuilt) with VBA. The Pivot Table field is calculating a field that contains an integer value. The Pivot Table field filter properly displays this value.

However, the Pivot Table itself calculated Sum field only displays 0 (aka zero). Other fields that are exactly the same as this one are displaying properly.

My data connection is built as follows:

Code:

ThisWorkbook.Connections.Add "ChartQuery", "", "OLEDB;Persist Security Info=0;DSN=Excel Files;
DBQ=" & wbFullName & _ ";DefaultDir=" & wbPath & ";DriverId=1046;MaxBufferSize=1024;PageTimeout=5;
BackgroundQuery:=False", sSQL, 2
(And yes, my sSQL is sound, there are no typos, no special character issues)

The filter in the Pivot Table shows my value (for example, 14) however it always only displays a zero

My Pivot Table is formatting the field (like the others just like it) as a Number, two decimals
My Pivot Table data source is ChartQuery

The worksheet this is pulling from is also set to use Number format for the entire column, but changing that doesn't make any difference even on the other fields that are working.

View 9 Replies View Related

Excel 2010 :: Pivot Table - Value Field - Multiply

Apr 25, 2014

I have a Pivot table showing costs of several types of items.

The issue is, the cost of an item is not in U$, it is in amounts of the unit value (example: Unit value of an item (cell A1) = U$500, and Item Cost (cell B1) = 2, the total cost is U$1000).

So instead of showing just the Item Cost (U$500) in the pivot table, I need to show 500*2 (A1*B1) which would be U$1000.

Can this be done in Excel 2010?

I don't want to create a new column with that multiplication, because I'm doing a monthly cost for the items.

View 3 Replies View Related

Excel 2010 :: Pivot Table Blank Column?

Jan 27, 2014

Why do blank columns with no information sometimes appear when I prepare pivot tables? Excel Version 2010. I hide the columns, but many times they re-appear on screen or print-outs.

View 1 Replies View Related

Excel 2010 :: Total Entries Between Two Dates In Table

Mar 17, 2014

I'm an Excel newbie using 2010, but have been given a rather daunting task. I have a lot of data organised in a table, something such as:

Column A: Name, Column B: City, Column C: Date Entered

I can obviously filter this table to show the values I need, but I need it to automatically tell me the total amount of people entered per week, per city on a separate worksheet.

I understand I could use a pivot table for some of this, but I want to further automatically manipulate the data once I have the totals (for example, adding a financial value for each, etc) which I'm not certain how to do with a pivot.

So, ideally what I would like is a formula that says total entries in Table 1 that are marked Sheffield in Column B and have a value including or between 01/03/2014 and 07/03/2014 in Column C.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved